- Disable auto credentials by default. This is a breaking change
for clients that are using it, wittingly or not.
- New libcurl ssl option value CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl
to automatically locate and use a client certificate for
authentication, when requested by the server.
- New curl tool options --ssl-auto-client-cert and
--proxy-ssl-auto-client-cert map to CURLSSLOPT_AUTO_CLIENT_CERT.
This option is only supported for Schannel (the native Windows SSL
library). Prior to this change Schannel would, with no notification to
the client, attempt to locate a client certificate and send it to the
server, when requested by the server. Since the server can request any
certificate that supports client authentication in the OS certificate
store it could be a privacy violation and unexpected.
Fixes https://github.com/curl/curl/issues/2262
Reported-by: Jeroen Ooms
Assisted-by: Wes Hinsley
Assisted-by: Rich FitzJohn
Ref: https://curl.se/mail/lib-2021-02/0066.html
Reported-by: Morten Minde Neergaard
Closes https://github.com/curl/curl/pull/6673
Instead output a warning about it and continue with the defaults.
These SSL versions are typically not supported by the TLS libraries since a
long time back already since they are inherently insecure and broken. Asking
for them to be used will just cause an error to be returned slightly later.
In the unlikely event that a user's TLS library actually still supports these
protocol versions, this change might make the request a little less insecure.
Closes#6772
Previously only a single -b cookie parameter was supported with the last
one winning. This adds support for supplying multiple -b params to have
them serialized semicolon separated. Both cookiefiles and cookies can be
entered multiple times.
Closes#6649
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Previously an empty 'Referer:' header was added to the HTTP request when
passing `--referer ';auto'` or `--referer ''` on the command-line. This
patch makes `--referer` work like `--header 'Referer:'` and will only add
the header if it has a non-zero length value.
Reviewed-by: Jay Satiro
Closes#6610
- New libcurl options CURLOPT_DOH_SSL_VERIFYHOST,
CURLOPT_DOH_SSL_VERIFYPEER and CURLOPT_DOH_SSL_VERIFYSTATUS do the
same as their respective counterparts.
- New curl tool options --doh-insecure and --doh-cert-status do the same
as their respective counterparts.
Prior to this change DOH SSL certificate verification settings for
verifyhost and verifypeer were supposed to be inherited respectively
from CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER, but due to a bug
were not. As a result DOH verification remained at the default, ie
enabled, and it was not possible to disable. This commit changes
behavior so that the DOH verification settings are independent and not
inherited.
Ref: https://github.com/curl/curl/pull/4579#issuecomment-554723676
Fixes https://github.com/curl/curl/issues/4578
Closes https://github.com/curl/curl/pull/6597
- Add support services without region and service prefixes in
the URL endpoint (ex. Min.IO, GCP, Yandex Cloud, Mail.Ru Cloud Solutions, etc)
by providing region and service parameters via aws-sigv4 option.
- Add [:region[:service]] suffix to aws-sigv4 option;
- Fix memory allocation errors.
- Refactor memory management.
- Use Curl_http_method instead() STRING_CUSTOMREQUEST.
- Refactor canonical headers generating.
- Remove repeated sha256_to_hex() usage.
- Add some docs fixes.
- Add some codestyle fixes.
- Add overloaded strndup() for debug - curl_dbg_strndup().
- Update tests.
Closes#6524
We currently use both spellings the british "behaviour" and the american
"behavior". However "behavior" is more used in the project so I think
it's worth dropping the british name.
Closes#6395
This option sets the (octal) mode to use for the remote file when one is
created, using the SFTP, SCP or FILE protocols. When not set, the
default is 0644.
Closes#6244
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
Previously, it would pass on a define (int) which could make libcurl
read junk as a value - which prevented the CURLOPT_IPRESOLVE option to
"take". This could then make test 2100 do two DoH requests instead of
one!
Fixes#6042Closes#6043
... since it is converted and the original pointer is freed on Windows
unicode handling.
Follow-up to aa8777f63fFixes#5977Closes#5978
Reported-by: xwxbug on github
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
Updated terminology in docs, comments and phrases to refer to C strings
as "null-terminated". Done to unify with how most other C oriented docs
refer of them and what users in general seem to prefer (based on a
single highly unscientific poll on twitter).
Reported-by: coinhubs on github
Fixes#5598Closes#5608
Prior to this change in Windows Unicode builds most parsed options would
not be freed.
Found using _CrtDumpMemoryLeaks().
Ref: https://github.com/curl/curl/issues/5545
- use `wmain` instead of `main` when `_UNICODE` is defined [0]
- define `argv_item_t` as `wchar_t *` in this case
- use the curl_multibyte gear to convert the command-line arguments to
UTF-8
This makes it possible to pass parameters with characters outside of
the current locale on Windows, which is required for some tests, e.g.
the IDN tests. Out of the box, this currently only works with the
Visual Studio project files, which default to Unicode, and winbuild
with the `ENABLE_UNICODE` option.
[0] https://devblogs.microsoft.com/oldnewthing/?p=40643
Ref: https://github.com/curl/curl/issues/3747
Closes https://github.com/curl/curl/pull/3784
Ensures that -K/--config inserts new items at the end of the list
instead of overwriting the second item, and that after a -K/--config
option has been parsed, the option parser's view of the current config
is update.
Fixes#5120Closes#5123
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
Make the tool check for alt-svc support at run-time and return error
accordingly if not present when the option is used.
Reported-by: Harry Sintonen
Closes#4878
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes#4500
New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes#4422Closes#4470
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
Jay Satiro