779ca09775
Check for and config for the ca cert bundle properly when built with GnuTLS.
...
Previously this was only done for OpenSSL builds.
2005-04-19 22:23:37 +00:00
313f1a1e83
when --with-gnutls is used, we assume a bin/libgnutls-config file in the
...
given prefix. Building something with gnutls without it just is too error-
prone.
2005-04-19 22:12:34 +00:00
21337f4776
remove the warning for a lacking crypto lib since it migth just be a gnutls
...
build...
2005-04-19 22:03:10 +00:00
c2fcdf3a02
if libgnutls-config isn't found in the given path, deal with it nicer (but
...
it is still likely to not do very good since it can't figure out all the lib
dependencies)
2005-04-15 08:45:35 +00:00
241b2b4ae3
set LD_LIBRARY_PATH when GnuTLS has been found
2005-04-07 22:13:40 +00:00
bebd5dbc5a
Add support for --with-gnutls. If configure detects OpenSSL, you need to
...
to explicitly disable that first with --without-ssl. Initial attempt.
2005-04-07 15:12:03 +00:00
93fcb94b62
fix configure's SSL-detection for msys/mingw (from Andres Garcia)
2005-03-30 20:55:44 +00:00
d6460aff36
added missing features to curl-config
2005-03-15 07:49:47 +00:00
9f3d9da119
if ws2_32 is used, append the lib last in the LIBS list (too) to make it
...
build and link fine with c-ares
2005-03-14 09:39:11 +00:00
8ed31c48e0
Added --enable-sspi that now make libcurl build with SSPI support. This only
...
works when built for win32.
2005-03-13 23:59:28 +00:00
205f8b266c
Fixed LDAP library file name bug (KNOWN_BUGS #1 ). configure now auto-detects
...
the correct dynamic library names by default, and provides override switches
--with-ldap-lib, --with-lber-lib and --without-lber-lib. Added
CURL_DISABLE_LDAP to platform-specific config files to disable LDAP
support on those platforms that probably don't have dynamic OpenLDAP
libraries available to avoid compile errors.
2005-03-11 05:28:07 +00:00
c4f7570a23
Stopped linking to the SSL libs if a full installation isn't found.
...
Removed a redundant library check.
2005-03-09 18:40:41 +00:00
18d87edd6d
Fixed the --with-zlib configure option so that it always adds the specified
...
path to the compiler flags. Before, a zlib installation in the default
path was always used in preference to the one in the desired location.
2005-03-08 03:24:49 +00:00
4d815c9990
Based on Mike Dobbs' report, BUILDING_LIBCURL is now defined in here if it
...
runs to build with mingw.
2005-02-18 08:24:53 +00:00
f169b750b8
check for ENGINE_load_builtin_engines() as well if engine is around
2005-02-14 23:50:29 +00:00
22c1d48cb2
remove the check for strftime(), we don't need it
2005-02-11 19:34:05 +00:00
65dbee01e5
check for errno.h
2005-01-18 14:34:50 +00:00
8ac90316d9
nah, don't use the system's getpass() function since it too often is limited
...
to 8(!) or similar lengths passwords
2004-12-26 09:17:38 +00:00
7ef6b05ef1
My reimplementation and cleanup of the getpass source code. We officially no
...
longer use Angus Mackay's getpass code due to the weirdo license his code was
donated to us under.
2004-12-25 22:08:02 +00:00
3955b31362
David Shaw fixed the disable variables so that curl-config --feature works
...
correctly!
2004-12-23 08:48:59 +00:00
58f4af7973
Marcin Konicki provided two configure fixes and a source fix to make curl
...
build out-of-the-box on BeOS.
2004-12-22 22:28:10 +00:00
090a7f38be
check for openssl/pkcs12.h
2004-12-19 09:36:54 +00:00
f966dad306
Dan Fandrich did minor corrections to his SSL cleanup patch
2004-12-13 08:34:46 +00:00
df3ca59116
Dan Fandrich:
...
Here's a stab at a consolidation of the SSL detection heuristics into
configure. Source files aren't changed by this patch, except for setup.h and
the various config*.h files. Within the configure script, OPENSSL_ENABLED is
used to determine if SSL is being used or not, and outside configure,
USE_SSLEAY means the same thing; this could be even further unified some day.
Now, when SSL is not detected, configure skips the various checks that are
dependent on SSL, speeding up the configure process and avoiding complications
with cross compiles. I also updated all the architecture- specific config
files I could see, but I couldn't test them.
2004-12-11 18:47:22 +00:00
98adcdd466
Ton Voon provided a configure fix that should fix the notorious (mostly
...
reported on Solaris) problem where the size_t check fails due to the SSL libs
being found in a dir not searched through by the run-time linker.
patch-tracker entry #1081707 .
2004-12-09 09:27:30 +00:00
ac269a8f68
Dan Fandrich added the --disable-cookies option to configure to build
...
libcurl without cookie support. This is mainly useful if you want to build a
minimalistic libcurl with no cookies support at all. Like for embedded
systems or similar.
2004-12-05 23:59:32 +00:00
25559ac02e
Andrés García fixed the configure script to detect select properly when run
...
with Msys/Mingw on Windows.
2004-11-24 15:49:43 +00:00
a4e1ac7952
David Phillips fix for test 518 and my extension to make it not run on
...
systems that can't run it fine.
2004-11-22 22:26:46 +00:00
94043b1150
Dan Fandrich added the --disable-crypto-auth option to configure to allow
...
libcurl to build without Digest support. (I figure it should also explicitly
disable Negotiate and NTLM.)
2004-11-12 09:18:14 +00:00
4897587615
Dan Fandrich can spell, I cannot
2004-11-11 23:13:59 +00:00
8c16696f47
fix a IDN detect/use mistake
2004-11-11 22:01:53 +00:00
710e370c34
Dan Fandrich added --disable-verbose
2004-11-11 16:34:24 +00:00
7bb6d76d14
When libidn is detected without explicitly told to, we provide -L/lib and
...
-I/include options. Not anymore.
2004-11-11 14:41:37 +00:00
cd73a733c7
dates from 2038 or later now return 0x7fffffff when 32 bit time_t is used
2004-11-11 09:26:09 +00:00
49111a63e6
configure --with-gssapi fix
2004-11-10 21:43:41 +00:00
facfa19cdd
weirdo hack to fix debian bug report 278691:
...
'curl -v writes debugging to its network socket if stderr is closed'
2004-11-08 19:41:28 +00:00
c688166066
check for and require tld.h to be present before libidn usage is activated
...
in the build, since libidn 0.3.X didn't have the header and we don't support
that old libidn versions anyway.
This was mentioned on the list by Jean-Philippe Barrette-LaPierre and in bug
report #1062264 .
2004-11-08 07:47:08 +00:00
2e973684c0
based Andres Garcia's patch, added for mingw build
2004-11-04 14:19:22 +00:00
736a40fec9
When cross-compiling, the configure script no longer attempts to use
...
pkg-config on the build host in order to detect OpenSSL compiler options.
2004-11-01 22:50:59 +00:00
82d6cfa7fc
Peter Wullinger pointed out that curl should call setlocale() properly to
...
initiate the specific language operations, to make the IDN stuff work better.
2004-10-18 13:37:18 +00:00
af677c4e1d
If long long is supported, check if [num]LL is supported for numerical
...
constants.
2004-10-10 03:22:45 +00:00
7663775971
if basename was found, check for a prototype and if none was found, provide
...
our own in the formdata.c file to prevent warnings on systems without it
2004-10-08 08:18:08 +00:00
1239e48304
check for tld_strerror
2004-10-07 07:41:14 +00:00
5c7dcc6c33
Dan Fandrich fix for hosts that need both -lnsl and -lsocket
2004-10-06 07:33:03 +00:00
19a568a983
make the given path to --with-libidn override any other installation
2004-10-05 08:45:13 +00:00
f4252f8672
when building with libidn support, check for idna_strerror() which is
...
included in very recent versions
2004-10-03 20:50:47 +00:00
8e87223195
- Based on Fedor Karpelevitch's formpost path basename patch, file parts in
...
formposts no longer include the path part. If you _really_ want them, you
must provide your preferred full file name with CURLFORM_FILENAME.
Added detection for libgen.h and basename() to configure. My custom
basename() replacement function for systems without it, might be a bit too
naive...
Updated 6 test cases to make them work with the stripped paths.
2004-10-01 06:36:11 +00:00
75e5967afd
made pkg-config not get used if a path is given with --with-ssl
2004-09-28 22:04:05 +00:00
f71b3f48a1
Replaced the former date parser with a rewrite. No more yacc/bison needed.
2004-09-15 07:28:04 +00:00
62ff567c47
the autobuilds failed all over on AIX, attempt to fix the strerror_r() problem
...
by setting _THREAD_SAFE (and -qthreaded) before strerror_r() is checked for.
2004-08-19 06:41:49 +00:00
Daniel Stenberg