The stripcredentials unittest fails to compile on platforms without
xattr support, for example the Solaris member in the buildfarm which
fails with the following:
CC unit1621-unit1621.o
CC ../libtest/unit1621-first.o
CCLD unit1621
Undefined first referenced
symbol in file
stripcredentials unit1621-unit1621.o
goto problem 2
ld: fatal: symbol referencing errors. No output written to .libs/unit1621
collect2: error: ld returned 1 exit status
gmake[2]: *** [Makefile:996: unit1621] Error 1
Fix by excluding the test on such platforms by using the reverse
logic from where stripcredentials() is defined.
Closes#3759
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
OAUTHBEARER tokens were incorrectly generated in a format similar to
XOAUTH2 tokens. These changes make OAUTHBEARER tokens conform to the
RFC7628.
Fixes: #2487
Reported-by: Paolo Mossino
Closes https://github.com/curl/curl/pull/3377
The threaded-shared-conn.c example turned into test case. Only works if
pthread was detected.
An attempt to detect future regressions such as e3a53e3efbCloses#3687
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes#2431Closes#3669
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
Follow-up to 8eddb8f425.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes#3621
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes#3587
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes#3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The code is more or less copied from the stdout comparison code, maybe
some better reuse is possible.
test 1457 is adjusted to make the output actually match (by using --silent)
test 506 used <stderr> without actually needing it, so that <stderr> block is removed
Closes#3536
Option -F generates an intermediate representation of the mime structure
that is used later to create the libcurl mime structure and generate
the --libcurl statements.
Reported-by: Daniel Stenberg
Fixes#3532Closes#3546
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
MinGW-w64 defaults to targeting Windows 7 now, so GetTickCount64 is
used and the milliseconds are represented as unsigned long long,
leading to a compiler warning when implicitly converting them to long.
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes#3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.comhttps://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes#3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
Ensure to perform the checks we have to enforce a sane domain in
the cookie request. The check for non-PSL enabled builds is quite
basic but it's better than nothing.
Closes#2964
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes#2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
A URL with a single colon without a portnumber should use the default
port, discarding the colon. Fix, add a testcase and also do little bit
of comment wordsmithing.
Closes#3365
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
... when not actually following the redirect. Otherwise we return error
for this and an application can't extract the value.
Test 1518 added to verify.
Reported-by: Pavel Pavlov
Fixes#3340Closes#3364
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353Closes#3356
Important for when the file is going to be read again and thus must not
contain old contents!
Adds test 327 to verify.
Reported-by: daboul on github
Fixes#3299Closes#3300
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
The tests 20 and 1322 are using getaddrinfo of libc for resolving. In
eglibc-2.19 there is a memory leakage and invalid free bug which
surfaces in some special circumstances (PF_UNSPEC hint with invalid or
non-existent names). The valgrind runs in testing fail in these
situations.
As the tests 20/1322 are not specific on either protocol (IPv4/IPv6)
this commit changes the hints to IPv4 protocol by passing `--ipv4` flag
on the tests' command line. This prevents the valgrind failures.
SO_EXCLUSIVEADDRUSE is on by default on Vista or newer,
but does not work together with SO_REUSEADDR being on.
The default changes were made with stunnel 5.34 and 5.35.
APPENDQUERY + URLENCODE would skip all equals signs but now it only skip
encoding the first to better allow "name=content" for any content.
Reported-by: Alexey Melnichuk
Fixes#3231Closes#3231
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes#3220Fixes#3233Closes#3223Closes#3235
- for "--netrc", don't ignore the login/password specified with "--user",
only ignore the login/password in the URL.
This restores the netrc behaviour of curl 7.61.1 and earlier.
- fix the documentation of CURL_NETRC_REQUIRED
- improve the detection of login/password changes when reading .netrc
- don't read .netrc if both login and password are already set
Fixes#3213Closes#3224
The previous coding used a format string whose output depended on the
current locale of the environment running the test. Since the gist of
the test is to have a format string, with the actual formatting being
less important, switch to a more stable formatstring with decimals.
Reported-by: Marcel Raad
Closes#3234
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The internal buffer in infof() is limited to 2048 bytes of payload plus
an additional byte for NULL termination. Servers with very long error
messages can however cause truncation of the string, which currently
isn't very clear, and leads to badly formatted output.
This appends a "...\n" (or just "..." in case the format didn't with a
newline char) marker to the end of the string to clearly show
that it has been truncated.
Also include a unittest covering infof() to try and catch any bugs
introduced in this quite important function.
Closes#3216
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The function identifying a leading "scheme" part of the URL considered a few
letters ending with a colon to be a scheme, making something like "short:80"
to become an unknown scheme instead of a short host name and a port number.
Extended test 1560 to verify.
Reported-by: Hagai Auro
Fixes#3220Closes#3223
When not actually following the redirect and the target URL is only
stored for later retrieval, curl always accepted "non-supported"
schemes. This was a regression from 46e164069d.
Reported-by: Brad King
Fixes#3210Closes#3215
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
Classic MinGW has neither InitializeCriticalSectionEx nor
GetTickCount64, independent of the target Windows version.
Closes https://github.com/curl/curl/pull/3113
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
The LD_PRELOAD functionality doesn't exist on macOS, so skip any tests
requiring it.
Fixes#2394Closes#3106
Reported-by: Github user @jakirkham
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
To make it only send one DoH request and avoid the race condition that
could lead to the requests getting sent in reversed order and thus
making it hard to compare in the test case.
Fixes#3107Closes#3108
