Following commit e450f66a02 and the changes in the multi interface
being used internally, from 7.29.0, the transfer cancellation in
pop3_dophase_done() is no longer required.
Moved the blocking state machine to the disconnect functions so that the
logout / quit functions are only responsible for sending the actual
command needed to logout or quit.
Additionally removed the hard return on failure.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Removed this pointer to a downloaded bytes counter because it was set in
pop3_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Updated the mailbox variable to correctly reflect it's purpose. The
name mailbox was a leftover from when IMAP and POP3 support was
initially added to curl.
Removed user and passwd from the POP3 struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
Moved the mailbox and custom request variables from the per-connection
struct pop3_conn to the new per-request struct and fixed references
accordingly.
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
A call to Curl_ssl_connect() was accidentally left in when the SSL/TLS
connection layer was reworked in 7.29. Not only would this cause the
connection to block but had the additional overhead of calling the
non-blocking connect a little bit later.
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
Corrected the order of the upgrade_tls() functions and moved the handler
upgrade and getsock() functions out from the middle of the state related
functions.
Corrected the order of the pop3_state_capa() / imap_state_capability()
and the pop3_state_capa_resp() / imap_state_capability_resp() functions
to match the execution order.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Fixed the SASL capability detection to include the space character
before the authentication mechanism list. Otherwise a capability such
as SASLSOMETHING would be interpreted as enabling SASL and potentially
trying to identify SOMETHING as a mechanism.
Tidied up code from commit 6b6bdc83bdUpdated where a few instances of
the pop3c struct variable used the longer conndata struct rather than
matching what other code in pop3_authenticate() used.
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to APOP or Clear Text
authentication.
Bug: http://curl.haxx.se/mail/lib-2013-02/0004.html
Reported by: Stanislav Ivochkin
pop3_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to pop3s and start the CAPA command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
Fixed an issue where Curl_ssl_connect_nonblocking() wouldn't complete
correctly and the ssldone flag wouldn't be set to true for pop3s based
connections.
Bug introduced in commit: 4ffb8a6398.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
... it also clobbered the 'result' return value so that it wouldn't
return the error back to the parent function properly, which broke test
809 when run with 'multi-always'.
Corrected lines longer than 78 characters.
Changed POP3_AUTH_FINAL to POP3_AUTH to match SMTP code now that the
AUTH command is no longer sent on its own.
Introduced some comments in data sending functions.
Another attempt at trying to rational code and comment style.
Not all SASL enabled POP3 servers support the AUTH command on its own
when trying to detect the supported mechanisms. As such changed the
mechanism detection to use the CAPA command instead.
Because pop3_endofresp() is called for each line of data yet is not
passed the line and line length, so we have to use the data pointed to
by pp->linestart_resp which contains the whole packet, the mechanisms
were being detected in one call yet the function would be called for
each line of data.
Using curl with verbose mode enabled would show that one line of data
would be received in response to the AUTH command, before the AUTH
<mechanism> command was sent to the server and then the next few lines
of the original AUTH command would be displayed before the response from
the AUTH <mechanism> command. This would then cause problems when
parsing the CRAM-MD5 challenge data as extra data was contained in the
buffer.
Changed the parsing so that each line is checked for the mechanisms
and the function returns FALSE until the whole of the AUTH response has
been processed.
Previously it wasn't possible to connect to POP3 and not specify the
user name as a CURLE_ACCESS_DENIED error would be returned. This error
occurred because USER would be sent to the server with a blank user name
if no mailbox user was specified as the server would reply with -ERR.
This wasn't a problem prior to the 7.26.0 release but with the
introduction of custom commands the user and/or application developer
might want to issue a CAPA command without having to log in as a
specific mailbox user.
Additionally this fix won't send the newly introduced AUTH command if no
user name is specified.
The POP3 protocol doesn't really have the concept of error codes and
uses +, +OK and -ERR in response to commands to indicate continue,
success and error.
The AUTH command is one of those commands that requires multiple pieces
of data to be sent to the server where the server will respond with + as
part of the handshaking. This meant changing the values before
continuing with the next stage of adding authentication support.
Changed the order of the state machine to match the order of actual
events.
Reworked some comments and function parameter positioning that I missed
the other day.
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
Moved EOB definition into header file.
Switched the logic around in pop3_endofresp() to allow for the
introduction of auth-mechanism detection.
Repositioned second and third function variables where they will fit
within the 78 character line limit.
Tidied up some comments.
