Yang Tse
96395a908a
Make 'classic' output end of a test-suite run become again the end
...
of output, even when run time statistics are shown.
2009-12-21 15:50:24 +00:00
Yang Tse
e9a993b9e9
Move stopping of servers instructed by test definition, after the removal of
...
server logs advisor read lock and before test results verifications are done.
When stopping a pingpong server, stop server before its slaves.
2009-12-21 14:53:07 +00:00
Daniel Stenberg
982fe33924
test 566 was missing
2009-12-21 14:51:07 +00:00
Yang Tse
fa188eec7b
dead_child_handler also takes care of reaping pingpong server dead child processes
2009-12-21 14:43:29 +00:00
Yang Tse
bdd3763980
Reap processes dead children ASAP without blocking
2009-12-21 14:36:01 +00:00
Yang Tse
1cfa52b67d
Reinstate hi resolution time logging since this is not what is
...
now adding 90 extra seconds to the total time some autobuilds
need to make a full test-run.
2009-12-21 14:33:01 +00:00
Daniel Stenberg
83d34a246e
first small steps towards smtp
2009-12-21 08:33:47 +00:00
Yang Tse
76b3c9d70f
Replaced tabs with spaces
2009-12-21 02:37:23 +00:00
Yang Tse
efd1d9dc04
Improve delay command interruptability
2009-12-20 22:09:53 +00:00
Daniel Stenberg
88a0060b2e
revert that, we already had a function named like that!
2009-12-20 22:08:06 +00:00
Daniel Stenberg
4adf7d62d4
rename the verifyftp function to verifyserver since it is used to verify
...
a wide variety of protocol servers
2009-12-20 22:00:23 +00:00
Daniel Stenberg
2a3dafc0cd
introducing the first IMAP FETCH test
2009-12-20 11:07:04 +00:00
Yang Tse
f912f8d5d2
- Attempt to fix script compilation failure on versions older than 5.007003,
...
corelist -a Time::HiRes lists this as the first version released with it.
- Ensure ftp check delay timer is always an integral number.
2009-12-20 03:48:32 +00:00
Daniel Stenberg
af7a5b297f
support IMAP select and LOGOUT
2009-12-19 23:23:26 +00:00
Daniel Stenberg
344bbcf259
fix the ftp check delay timer to never be set below 1 to work correctly
...
in cases like test 190
2009-12-19 23:10:33 +00:00
Yang Tse
010fe5acd5
Slack time reduction
2009-12-19 13:20:07 +00:00
Yang Tse
aeec8e0b38
Added runtests.pl '-r' option for run time statistics
2009-12-19 04:15:22 +00:00
Yang Tse
2d15ac3d4e
server start and verification time as well as test preparation time
...
data is required in order to closer match total test execution time.
2009-12-18 19:17:14 +00:00
Yang Tse
53deae3781
Added test harness simple time execution stats
2009-12-18 15:23:18 +00:00
Yang Tse
39cc424e81
Comment out hi resolution time logging to verify if this is what might
...
be contributing 90 additional seconds to the total time some autobuilds
now need to make a full test-run.
2009-12-17 22:28:40 +00:00
Yang Tse
8343cb8910
Test harness process control enhancements
2009-12-17 19:37:01 +00:00
Daniel Stenberg
91d05903b4
Remove pointless storing of the protocol as a string within the connectdata
...
struct, and instead use the already stored string in the handler struct.
2009-12-17 15:45:04 +00:00
Yang Tse
414180b363
gettimeofday() requires perl version newer than 5.6
2009-12-17 03:50:32 +00:00
Yang Tse
002ed5f298
Test harness process control enhancements
2009-12-16 19:55:35 +00:00
Yang Tse
044ba6dad2
Test #1106 needs an ftp enabled client
2009-12-16 15:24:12 +00:00
Yang Tse
3802d027cd
Test harness process control enhancements
2009-12-16 15:16:06 +00:00
Daniel Stenberg
3111701c38
- Jon Nelson found a regression that turned out to be a flaw in how libcurl
...
detects and uses proxies based on the environment variables. If the proxy
was given as an explicit option it worked, but due to the setup order
mistake proxies would not be used fine for a few protocols when picked up
from '[protocol]_proxy'. Obviously this broke after 7.19.4. I now also added
test case 1106 that verifies this functionality.
(http://curl.haxx.se/bug/view.cgi?id=2913886 )
2009-12-14 23:16:09 +00:00
Yang Tse
99daca5a48
Prevent perl script dying messages in output, since tearing down the pinpong
...
server in this way, upon sysread failures, is part of the expected behavior.
2009-12-14 15:39:15 +00:00
Yang Tse
a6abbb120e
Adjust uppercase protocol string usage
2009-12-14 14:42:48 +00:00
Yang Tse
364d76aca7
Fix compiler warnings
2009-12-14 13:27:50 +00:00
Yang Tse
6e9a484ea6
signal handling to cleanup on SIGINT and SIGTERM, followup
2009-12-13 03:45:32 +00:00
Yang Tse
303f74c740
reapply diff between revisions 1.103 and 1.102
2009-12-13 03:44:45 +00:00
Daniel Stenberg
4ea8ad584b
updated with the new protocols
2009-12-12 22:48:11 +00:00
Daniel Stenberg
ec3bb8f727
introducing IMAP, POP3 and SMTP support (still lots of polish left to do)
2009-12-12 21:54:01 +00:00
Daniel Stenberg
296ebf382c
- Siegfried Gyuricsko found out that the curl manual said --retry would retry
...
on FTP errors in the transient 5xx range. Transient FTP errors are in the
4xx range. The code itself only tried on 5xx errors that occured _at login_.
Now the retry code retries on all FTP transfer failures that ended with a
4xx response.
(http://curl.haxx.se/bug/view.cgi?id=2911279 )
2009-12-10 21:02:11 +00:00
Yang Tse
0653fa107f
signal handling to cleanup on SIGINT and SIGTERM, followup
2009-12-09 18:41:43 +00:00
Daniel Stenberg
ebe5339003
- Martin Storsjo made libcurl use the Expect: 100-continue header for posts
...
with unknown size. Previously it was only used for posts with a known size
larger than 1024 bytes.
2009-12-07 20:25:17 +00:00
Yang Tse
d14bf09ab8
Fix 'uploaded' file descriptor leak
2009-12-03 20:37:49 +00:00
Yang Tse
636d2fe00a
signal handling to cleanup on SIGINT and SIGTERM
2009-12-03 13:12:04 +00:00
Yang Tse
2286f566d0
signal handling to cleanup on SIGINT and SIGTERM
2009-12-02 15:02:30 +00:00
Yang Tse
ed2aa87e63
Set socket option SO_REUSEADDR=true on stunnel accept'ing port
2009-12-01 15:36:34 +00:00
Yang Tse
a72ce23f16
- In order to better reflect that the returned pid is extracted from the
...
given file, serverpid sub is renamed to pidfromfile. In addition it is
enhanced to make sure that it always returns zero unless a numerical
positive value is returned.
- To better reflect that only process existance is actually checked,
checkserver sub is renamed to processexists. In addition it is enhanced
making it remove the given pid file when the extracted pid is no longer
alive.
2009-11-30 13:48:51 +00:00
Yang Tse
4d922545d5
- Added Diffie-Hellman parameters to several test harness certificate files in
...
PEM format. Required by several stunnel versions used by our test harness.
2009-11-28 10:01:21 +00:00
Yang Tse
1fc32d866a
Use different log files for each protocol
2009-11-28 05:06:19 +00:00
Yang Tse
a240f4d1df
Attempt to enhance stunnel 3.X logging
2009-11-27 19:52:56 +00:00
Yang Tse
6f273b1a5f
Prevent running stunnel unless its version can be determined.
2009-11-27 13:01:10 +00:00
Yang Tse
f07f17f2a4
Log sws IPv version, port and pid when exiting due to SIGINT or SIGTERM.
2009-11-27 12:01:25 +00:00
Yang Tse
c713627412
To allow remote log inspection avoid redirecting messages to stderr.
...
Set 0600 file permissions on certificate pem files.
2009-11-27 12:00:53 +00:00
Yang Tse
9cbf69ca0b
Log info for start up failures.
2009-11-26 22:07:47 +00:00
Yang Tse
cbd527843b
Only attempt to clear the server-logs lock when previously set by this same server.
2009-11-26 10:15:08 +00:00
Yang Tse
fba233bb34
signal handling to cleanup on SIGINT and SIGTERM
2009-11-26 04:38:29 +00:00
Yang Tse
094afbeb56
Enhance some debug messages for initialization failures.
...
Fix compiler warning: conditional expression is constant.
2009-11-23 16:11:50 +00:00
Yang Tse
55e68ba333
I removed leading 'curl' path on the 'curlbuild.h' include statement in
...
curl.h, adjusting auto-makefiles include path, to enhance portability to
OS's without an orthogonal directory tree structure such as OS/400.
2009-11-05 15:04:03 +00:00
Daniel Stenberg
223d848104
- Gabriel Kuri reported a problem with CURLINFO_CONTENT_LENGTH_DOWNLOAD if the
...
download was 0 bytes, as libcurl would then return the size as unknown (-1)
and not 0. I wrote a fix and test case 566 to verify it.
2009-10-31 18:51:50 +00:00
Daniel Stenberg
2c0b65d37b
Added test case 566 in an attempt to repeat bug 2884561
...
(http://curl.haxx.se/bug/view.cgi?id=2884561 ) but it seems to work for me...
2009-10-30 22:38:21 +00:00
Daniel Stenberg
d68f215f03
- "Tom" posted a bug report that mentioned how libcurl did wrong when doing a
...
POST using a read callback, with Digest authentication and
"Transfer-Encoding: chunked" enforced. I would then cause the first request
to be wrongly sent and then basically hang until the server closed the
connection. I fixed the problem and added test case 565 to verify it.
2009-10-30 22:24:48 +00:00
Daniel Stenberg
448d2b5f49
- Dima Barsky made the curl cookie parser accept cookies even with blank or
...
unparsable expiry dates and then treat them as session cookies - previously
libcurl would reject cookies with a date format it couldn't parse. Research
shows that the major browser treat such cookies as session cookies. I
modified test 8 and 31 to verify this.
2009-10-25 18:15:14 +00:00
Yang Tse
640e49976f
Fix compiler warning: loop without body
2009-10-10 12:29:32 +00:00
Daniel Stenberg
4f47fc4e14
- John P. McCaskey posted a bug report that showed how libcurl did wrong when
...
saving received cookies with no given path, if the path in the request had a
query part. That is means a question mark (?) and characters on the right
side of that. I wrote test case 1105 and fixed this problem.
2009-09-26 20:51:51 +00:00
Daniel Stenberg
8d39a31e89
added test 1105 (disabled) - it repeats a cookie path bug we need to fix
2009-09-26 11:46:41 +00:00
Daniel Stenberg
0fdb77d643
added three missing files to the dist archive
2009-09-17 17:38:25 +00:00
Yang Tse
ede2ac0ea2
Attempt to silence bogus compiler warning: "Potential null pointer dereference"
2009-09-17 15:33:32 +00:00
Yang Tse
be5c815f63
remove line obsoleted with previous commit
2009-09-17 14:02:50 +00:00
Yang Tse
31e106ced2
Attempt to silence bogus compiler warning: "Potential null pointer dereference"
2009-09-17 11:45:27 +00:00
Dan Fandrich
c67c4e7095
Added HTTP proxy keyword
2009-09-14 18:43:53 +00:00
Dan Fandrich
beb0a345ac
Renumbered test565 to test1104 to move it out of the range reserved for
...
libcurl tests.
2009-09-11 20:19:43 +00:00
Daniel Stenberg
7ff4b4f2b5
- Claes Jakobsson fixed a problem with cookie expiry dates at exctly the epoch
...
start second "Thu Jan 1 00:00:00 GMT 1970" as the date parser then returns 0
which internally then is treated as a session cookie. That particular date
is now made to get the value of 1.
2009-09-10 21:06:50 +00:00
Daniel Stenberg
b96f11f7ec
comment the "stunnel exited with [num]" stuff since this is now happen
...
in normal tests and is annoying
2009-09-01 17:05:24 +00:00
Gunter Knauf
f1320d6733
add cast to silent compiler warning with 64bit systems.
2009-08-29 15:44:31 +00:00
Daniel Stenberg
1d92cf1dab
disable the tests that differ between 32 and 64 bit
2009-08-27 18:15:38 +00:00
Patrick Monnerat
b0b2824b58
- Introduced a SYST-based test to properly set-up name format when dealing with the OS/400 FTP server.
...
- Fixed an ftp_readresp() bug preventing detection of failing control socket and causing FTP client to loop forever.
2009-08-24 12:57:25 +00:00
Dan Fandrich
5c59ee9488
Pull the certificate files from the source directory. Ensure that the
...
certificate tests only run on a localhost-hosted test server since the
host name is explicitly checked.
2009-08-18 00:18:54 +00:00
Daniel Stenberg
be2fcbcbf1
Added a range of new fun date strings to try. This set of dates come from a
...
mail posted to the http-state mailing list, from Adam Barth, and is said to be
the set of date formats the Chrome browser code is tested against:
http://www.ietf.org/mail-archive/web/http-state/current/msg00129.html
libcurl parses most of them identically, but not all of them.
2009-08-12 11:18:55 +00:00
Daniel Stenberg
4b44638f4d
use --insecure to allow non-matching known hosts for SSH-based protocols
2009-08-12 08:14:53 +00:00
Daniel Stenberg
e73fe837a8
- Peter Sylvester made the HTTPS test server use specific certificates for
...
each test, so that the test suite can now be used to actually test the
verification of cert names etc. This made an error show up in the OpenSSL-
specific code where it would attempt to match the CN field even if a
subjectAltName exists that doesn't match. This is now fixed and verified
in test 311.
2009-08-11 21:48:58 +00:00
Daniel Stenberg
0179dbe1c2
use --insecure for the SFTP and SCP tests
2009-07-28 17:55:00 +00:00
Daniel Stenberg
9cff716925
don't set READDATA since it isn't used and only confuses readers
2009-07-22 22:08:01 +00:00
Bill Hoffman
a8ea1e9ef4
ENH: add optional support for c-ares
2009-07-14 19:03:31 +00:00
Gunter Knauf
6dade671ad
renamed generated config.h to curl_config.h in order to avoid clashes when libcurl is used with other projects which also have a config.h (missing bits)
2009-07-14 15:36:12 +00:00
Gunter Knauf
f671d0513c
renamed generated config.h to curl_config.h in order to avoid clashes when libcurl is used with other projects which also have a config.h.
2009-07-14 13:25:14 +00:00
Gunter Knauf
100f6b7703
added PKG_CONFIG_PATH to output to better verify if it gets properly set with cross compiles.
2009-07-13 23:33:57 +00:00
Michal Marek
0b317b72ae
- When doing non-anonymous ftp via http proxies and the password is not
...
provided in the url, add it there (squid needs this).
2009-06-16 13:16:28 +00:00
Yang Tse
c2ce2aa4de
fix compiler warning
2009-06-12 09:01:41 +00:00
Yang Tse
4ea513cc38
fix compiler warning
2009-06-12 02:41:16 +00:00
Yang Tse
3ca0b9bb47
fix compiler warning
2009-06-11 17:46:33 +00:00
Yang Tse
7edcc22136
changed testcurl script to allow building test harness
...
programs when cross-compiling for a *-*-mingw* host.
2009-06-11 01:22:35 +00:00
Yang Tse
1d97f13462
TrackMemory is another feature not supported by curl-config
2009-06-10 04:06:06 +00:00
Yang Tse
2c16681225
Adjusted to take in account that...
...
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
2009-06-10 02:49:42 +00:00
Bill Hoffman
744dceaffe
ENH: lower case cmake functions and remove tabs and re-indent cmake code
2009-06-09 17:29:16 +00:00
Yang Tse
8d581f7fe4
Revert delegating c-ares linking magic on libtool and auto-makefiles when using
...
the uninstalled c-ares libtool archive built from the CVS embedded tree.
This embedded c-ares linking is again handled from the configure script.
2009-06-06 13:20:39 +00:00
Yang Tse
13fdb9d8a5
c-ares embbeded builds header include paths fully defined in makefiles
2009-06-04 04:13:39 +00:00
Yang Tse
7bf82a814b
Die when instructed to build c-ares and this fails
2009-06-03 00:07:46 +00:00
Yang Tse
cd5e6743f7
Delegate c-ares linking magic on libtool and auto-makefiles when using
...
the uninstalled c-ares libtool archive built from the CVS embedded tree.
2009-05-30 15:56:42 +00:00
Dan Fandrich
2091fe530f
Added missing NTLM feature for test 1097
2009-05-30 04:34:11 +00:00
Daniel Stenberg
1cf6c15ab4
- bug report #2796358 ( http://curl.haxx.se/bug/view.cgi?id=2796358 ) pointed
...
out that the cookie parser would leak memory when it parses cookies that are
received with domain, path etc set multiple times in the same header. While
such a cookie is questionable, they occur in the wild and libcurl no longer
leaks memory for them. I added such a header to test case 8.
2009-05-25 12:23:22 +00:00
Dan Fandrich
26028068e8
Added some missing test keywords
2009-05-22 21:34:32 +00:00
Gunter Knauf
274dc3ecac
forced to use nmake for VC builds early so that its also used for ares even if we find a GNU make first in path; simplified curl make call.
2009-05-21 15:18:26 +00:00
Gunter Knauf
5e2b5edde5
strip \r only on non-win32 platforms (wine on Linux).
2009-05-21 14:14:57 +00:00
Gunter Knauf
b8b6521659
removed an attempt to write to non-opened LOG introduced with r1.30.
2009-05-21 14:08:53 +00:00
Gunter Knauf
e37b1b0623
reduced duplicate code.
2009-05-21 13:23:49 +00:00
Gunter Knauf
4a79462c3e
stripped \r from win32 curl --version output.
2009-05-21 13:02:34 +00:00
Gunter Knauf
c328cc9608
enable mingw64 target.
2009-05-21 12:59:49 +00:00
Dan Fandrich
7071dd0162
Added "non-existing host" test keywords to make it easy to skip those
...
tests on machines that have broken DNS configurations (such as
those configured to use OpenDNS).
2009-05-20 19:30:06 +00:00
Yang Tse
4650732f4a
Update copyright year, to force CVS to update the $Id date string format
2009-05-18 12:25:45 +00:00
Yang Tse
501e72c3de
Remove temporary debug tracing, and add nasty error explanation
2009-05-18 02:19:21 +00:00
Daniel Stenberg
3cb06eb2b2
- James Bursa posted a patch to the mailing list that fixed a problem with
...
no_proxy which made it not skip the proxy if the URL entered contained a
user name. I added test case 1101 to verify.
2009-05-17 14:47:50 +00:00
Yang Tse
b8e73495a5
Extend displaying of logfiles upon first server start-up failure for http, https, ftp, ftps and tftp test harness servers.
2009-05-15 11:59:24 +00:00
Yang Tse
187cfc1594
Displaying of logfiles on ftp server satrtup failure for test case #100 becomes standard.
2009-05-15 11:14:03 +00:00
Yang Tse
90cd2a4753
fix compiler warning: unused variable
2009-05-15 10:16:33 +00:00
Yang Tse
6595592a71
Add some debug tracing
2009-05-14 19:52:19 +00:00
Yang Tse
199389c94a
Fix detection of automatically choosen listener port number on IPv6 enabled builds.
2009-05-14 13:00:54 +00:00
Yang Tse
c31438b2f2
log each setsockopt/SO_REUSEADDR failure
2009-05-13 19:20:45 +00:00
Yang Tse
843f73ecaa
fix print formatting-string directives
2009-05-13 04:16:00 +00:00
Yang Tse
86f043a66c
temporary debug trace for ftp server satrtup failure on testcase #100
2009-05-12 19:18:54 +00:00
Yang Tse
f882a63cba
fix LC_ALL and LC_CTYPE when set with conflicting values
2009-05-12 11:24:29 +00:00
Yang Tse
e25cff9328
Adjust test definition for TPF.
2009-05-11 17:21:26 +00:00
Yang Tse
36b397be9f
Fetch curl's 'CharConv' feature information, used by TPF.
2009-05-11 17:20:41 +00:00
Daniel Stenberg
e6e6c6e635
Added test 564 as DISABLED. It is for testing FTP over a SOCK4 proxy using
...
the multi interface, which currently doesn't work because of how the data
connection is not waiting for connect before it tries to do proxy magic.
2009-05-11 11:43:55 +00:00
Daniel Stenberg
1f340a262f
support --help to do the same as -h
2009-05-11 11:39:42 +00:00
Daniel Stenberg
56dab605f1
- I fixed the problem with doing NTLM, POST and then following a 302 redirect,
...
as reported by Ebenezer Ikonne (on curl-users) and Laurent Rabret (on
curl-library). The transfer was mistakenly marked to get more data to send
but since it didn't actually have that, it just hung there...
2009-05-11 08:55:58 +00:00
Yang Tse
75585f771a
Fix name of tool shown upon error.
2009-05-11 01:16:28 +00:00
Daniel Stenberg
e6f84b8cc8
Added test 1100 - "HTTP POST with NTLM authorization and following a 302
...
redirect" doesn't work, seems to repeat what Ebenezer Ikonne (on curl-users)
and Laurent Rabret (on curl-library) have reported. Disabled for now.
2009-05-10 22:10:13 +00:00
Daniel Stenberg
d1ba4324de
introduce VCURL for verify calls, so that it can be changed to use a different
...
binary than the one that gets tested, if need be
2009-05-10 21:20:15 +00:00
Daniel Stenberg
c0b5d378dc
made the cookie tests 61 and 62 test httponly cookies, both receiving in
...
headers and reading from cookie-jar
2009-05-10 18:02:37 +00:00
Yang Tse
31baaf72b4
Changed host name to be under the haxx.se domain
2009-05-08 15:49:19 +00:00
Yang Tse
9ef7b6afe2
Remove temporary and HP-UX autobuild specific change to debug SSH server start-up failures
2009-05-08 02:18:49 +00:00
Yang Tse
c5c03ac556
Fixes for non-ASCII platforms by David McCreedy
2009-05-08 02:14:50 +00:00
Yang Tse
7c6e0d5981
Temporary and HP-UX autobuild specific change to debug SSH server start-up failures
2009-05-06 10:32:06 +00:00
Yang Tse
a840cc700a
Revert change committed on Mon May 4 09:30:23 2009 UTC.
...
The origin of the problem with test case #251 was the --ftp-port not being the CLIENTIP address.
2009-05-05 08:46:31 +00:00
Yang Tse
5eba93c4e7
Fixed the --ftp-port address to the CLIENTIP address.
2009-05-05 08:19:55 +00:00
Yang Tse
ff3e574187
David McCreedy's patch to fix test suite harness to allow test FTP server and client on different machines, providing FTP client address when running the FTP test server.
2009-05-04 10:30:23 +00:00
Dan Fandrich
8119379d4f
Added and disabled test case 563 which shows KNOWN_BUGS #59 . The bug
...
report failed to mention that a proxy must be used to reproduce it.
2009-05-03 19:25:17 +00:00
Yang Tse
9137e717b0
Use build-time configured curl_socklen_t instead of socklen_t
2009-05-02 02:37:32 +00:00
Yang Tse
5a91746b80
David McCreedy's "TPF-platform specific changes to various files" patch
2009-05-01 12:39:40 +00:00
Yang Tse
96ea49870c
When generated, display libcurl.pc and libcares.pc
2009-04-30 17:06:58 +00:00
Daniel Stenberg
6b95c4e358
- I was going to fix issue #59 in KNOWN_BUGS
...
If the CURLOPT_PORT option is used on an FTP URL like
"ftp://example.com/file;type=A" the ";type=A" is stripped off.
I added test case 562 to verify, only to find out that I couldn't repeat
this bug so I hereby consider it not a bug anymore!
2009-04-30 09:02:39 +00:00
Yang Tse
7d1bb21c19
Display only CURL_* and CARES_* symbol/macro definitions from curlbuild.h and ares_build.h
2009-04-29 19:02:22 +00:00
Yang Tse
296baeb096
Trigger c-ares prebuild stage for fake-config setup's
2009-04-29 17:57:49 +00:00
Daniel Stenberg
e2c6e00570
- Based on bug report #2723219 ( http://curl.haxx.se/bug/view.cgi?id=2723219 )
...
I've now made TFTP "connections" not being kept for re-use within libcurl.
TFTP is UDP-based so the benefit was really low (if even existing) to begin
with so instead of tracking down to fix this problem we instead removed the
re-use. I also enabled test case 1099 that I wrote a few days ago to verify
that this change fixes the reported problem.
2009-04-29 11:30:03 +00:00
Yang Tse
5957498c6f
When running testcurl.pl display definitions from ares_build.h
2009-04-29 01:31:37 +00:00
Yang Tse
b6282b99cb
allow usage of in-tree c-ares when building from outside of the cvs tree
2009-04-29 00:38:08 +00:00
Yang Tse
af41fb79b5
Include <arpa/inet.h> if HAVE_ARPA_INET_H is defined
2009-04-27 23:59:41 +00:00
Yang Tse
535b7c5e0f
Log MAKEFLAGS environment variable along with the others.
2009-04-27 19:21:45 +00:00
Daniel Stenberg
082b0d822c
test 1099: "TFTP get first a non-existing file then an existing" added disabled
...
as things don't work right here!
2009-04-24 21:46:42 +00:00
Yang Tse
33a3753c3f
libcurl's memory.h renamed to curl_memory.h
2009-04-21 11:46:16 +00:00
Daniel Stenberg
30f7a2ff20
- Pramod Sharma reported and tracked down a bug when doing FTP over a HTTP
...
proxy. libcurl would then wrongly close the connection after each
request. In his case it had the weird side-effect that it killed NTLM auth
for the proxy causing an inifinite loop!
I added test case 1098 to verify this fix. The test case does however not
properly verify that the transfers are done persistently - as I couldn't
think of a clever way to achieve it right now - but you need to read the
stderr output after a test run to see that it truly did the right thing.
2009-04-17 12:48:24 +00:00
Yang Tse
8aa88f4d36
re-enable all tests for all icc autobuilds
2009-04-17 07:30:56 +00:00
Daniel Stenberg
dd0b38b32f
first take at bundling cmake-related files in the tarball
2009-04-14 22:00:37 +00:00
Yang Tse
c382c550e7
fix compiler warning: implicit conversion shortens 64-bit value into a 32-bit value
2009-04-14 12:53:53 +00:00
Yang Tse
c621546bd6
fix compiler warning: implicit conversion shortens 64-bit value into a 32-bit value
2009-04-13 07:18:39 +00:00
Yang Tse
aa330b8240
improve stunnel version detection
2009-04-13 03:47:16 +00:00
Yang Tse
74f9c570ea
Adjust comment
2009-04-10 02:58:01 +00:00
Benoit Neil
4d396169c8
Cleaned up the custom definition I added (replaced by CURL_STATICLIB)
2009-04-09 19:59:38 +00:00
Gunter Knauf
2b96c3f5ce
add back most likely acciedently removed function name justtimeout to fix autobuild breaks.
2009-04-09 02:46:56 +00:00
Yang Tse
63fad159e8
Skip test #558 and #559 also when using a Win32 DLL
2009-04-09 01:24:41 +00:00
Benoit Neil
e5f1480a38
(Minor update) Added labal prefixes to tests targets
2009-04-08 23:48:07 +00:00
Benoit Neil
020955ebc2
Added special define for tests that directly include libcurl sources.
2009-04-08 23:35:09 +00:00
Gisle Vanem
59997ecad5
Avoid warnings when HAVE_ALRM and SIGALRM are not defined.
2009-04-08 18:37:11 +00:00
Gisle Vanem
6e2f0833ad
#ifdef around variables to squelsh warnings.
2009-04-08 18:31:54 +00:00
Benoit Neil
25f626cc52
Fixed compile defines in CMake scripts
2009-04-08 11:42:45 +00:00
Daniel Stenberg
c4fba310d2
and include the .inc files in the release tarballs...
2009-04-07 22:07:07 +00:00
Benoit Neil
e9dd099870
Added missing tests in CMake, added Makefile.inc for tests (+ use in CMake scripts), and fixed a missing define under windows in a test source file.
2009-04-07 21:59:15 +00:00
Benoit Neil
7a9fab52be
Fixed tests/server build (removed unnecessary link to libcurl).
2009-04-07 11:05:26 +00:00
Benoit Neil
b85154f13f
Added tests (exes) targets, refactor a few things.
...
PS: Once again, sorry if the added files have executable perms on Linux.
2009-04-06 21:05:44 +00:00
Daniel Stenberg
49c6d7e32d
Added test 1097 to verify the bug Axel Kuhn epidox posted on March 3 2009
...
on curl-users, it is also added to DISABLED since I don't have time to work
on it further right now.
2009-03-03 13:25:19 +00:00
Daniel Stenberg
7f22da5230
verify that a 550-response for a RETR returns 78 but also that the control
...
connection is kept alive afterwards
2009-02-19 13:47:06 +00:00
Daniel Stenberg
bdd4294e79
- Craig A West brought us: libcurl now defaults to do CONNECT with HTTP
...
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
2009-02-02 16:19:23 +00:00
Daniel Stenberg
82ca52713b
- Alexey Borzov filed bug report #2535504
...
(http://curl.haxx.se/bug/view.cgi?id=2535504 ) pointing out that realms with
quoted quotation marks in HTTP Digest headers didn't work. I've now added
test case 1095 that verifies my fix.
2009-01-26 13:19:03 +00:00
Dan Fandrich
ddd3fe5948
Improved the title and keywords
2009-01-21 04:46:13 +00:00
Dan Fandrich
5591550167
Fixed a couple more locale-dependent toupper conversions, mainly for
...
clarity. This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)
Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
2009-01-21 04:42:47 +00:00
Dan Fandrich
6bb9ef8de4
Call setlocale() for libtest tests to test the effects of locale-induced
...
libc changes on libcurl.
2009-01-21 04:30:05 +00:00
Dan Fandrich
14b6cc4e22
Always use nocheck="yes" for consistency
2009-01-07 21:57:26 +00:00
Gunter Knauf
aa32f61ce7
sync'd address with other tests.
2008-12-30 15:33:09 +00:00
Gunter Knauf
8266727062
trial with an address which has a valid domain part but invalid host to avoid dns redirections.
2008-12-30 09:16:38 +00:00
Dan Fandrich
4607dfe257
Mention what makes this test special
2008-12-11 03:01:38 +00:00
Dan Fandrich
01d6133bd7
Added test cases 1089 and 1090 to test --write-out after a redirect to
...
test a report that the size didn't work, but these test cases pass.
2008-12-09 21:59:57 +00:00
Daniel Stenberg
18371aaff9
- Fred Machado posted about a weird FTP problem on the curl-users list and when
...
researching it, it turned out he got a 550 response back from a SIZE command
and then I fell over the text in RFC3659 that says:
The presence of the 550 error response to a SIZE command MUST NOT be taken
by the client as an indication that the file cannot be transferred in the
current MODE and TYPE.
In other words: the change I did on September 30th 2008 and that has been
included in the last two releases were a regression and a bad idea. We MUST
NOT take a 550 response from SIZE as a hint that the file doesn't exist.
2008-12-08 20:20:51 +00:00
Dan Fandrich
ecc6f550eb
Added tests 1087 and 1088 to test Basic authentication on a redirect
...
with and without --location-trusted
2008-11-25 23:30:53 +00:00
Dan Fandrich
640974fb28
If a HTTP request is Basic and num is already >=1000, the HTTP test server
...
adds 1 to num to get the data section to return. This allows testing
authentication negotiations using the Basic authentication method.
2008-11-25 23:23:47 +00:00
Dan Fandrich
0fa14c8662
Fully clean up after test 608 so that it can be run twice in succession.
2008-11-24 22:06:43 +00:00
Daniel Stenberg
ba9f8c674c
restored from my messy previous commit mistake
2008-11-21 07:47:31 +00:00
Daniel Stenberg
40e8b4e527
- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is
...
used. It has been used since forever but it was never a good idea to use
unless explicitly asked for.
2008-11-19 22:00:14 +00:00
Daniel Stenberg
4741e64c89
Josef Wolf's extension that allows a $TESTDIR/gdbinit$testnum file that when
...
you use runtests.pl -g, will be sourced by gdb to allow additional fancy
or whatever you see fit
2008-11-19 21:56:11 +00:00
Dan Fandrich
cdd6054e08
Display the time in verbose mode during the torture tests to help determine
...
when the tests stall.
2008-11-17 20:24:13 +00:00
Dan Fandrich
d1f063c62d
Shortened some FTP responses to allow the timeout to be reduced by a second
...
while still causing a timeout during the data phase.
2008-11-13 01:45:59 +00:00
Dan Fandrich
b2ed1e2607
Fixed an OOM problem with test 560
2008-11-12 22:26:06 +00:00
Dan Fandrich
fb8870297d
Give the test an extra second to run so it passes on slow machines
2008-11-12 01:04:27 +00:00
Daniel Stenberg
d07d1a6ef8
Added test case 560:
...
This test was added after the HTTPS-using-multi-interface with OpenSSL
regression of 7.19.1 to hopefully prevent this embarassing mistake from
appearing again... Unfortunately the bug wasn't triggered by this test, which
presumably is because the connect to a local server is too fast/different
compared to the real/distant servers we saw the bug happen with.
2008-11-11 21:59:25 +00:00
Daniel Stenberg
8bdd60fa71
Added missing <keywords>
2008-11-11 21:58:41 +00:00
Yang Tse
95a849efc2
terminate with appropriate exit code
2008-11-07 12:22:43 +00:00
Dan Fandrich
2903a5c050
Added test 1086 to test a timeout the occurs during an FTP data transfer.
2008-11-06 00:13:18 +00:00
Dan Fandrich
4d50b9f1f1
Make the SLOWDOWN option slow the FTP data connection, not just the
...
control connection.
2008-11-06 00:10:58 +00:00
Yang Tse
02fc7bb5f6
fix OOM handling
2008-10-31 14:46:48 +00:00
Yang Tse
0ce97f77e0
Use our Curl_addrinfo definition even when an addrinfo struct is available.
...
Use a wrapper function to call system's getaddrinfo().
2008-10-30 13:45:25 +00:00
Dan Fandrich
dc31387c6f
SLOWDOWN actually causes a 0.01 second delay between bytes
2008-10-30 01:44:18 +00:00
Dan Fandrich
a10044e110
Changed the "resolve" test precheck program to verify that an IPv6 socket
...
can be created before resolving the IPv6 name. In the context of running
a test, it doesn't make sense to run an IPv6 test when a host is resolvable
but IPv6 isn't usable. This should fix failures of test 1085 on hosts with
library and DNS support for IPv6 but where actual use of IPv6 has been
administratively disabled.
2008-10-28 20:03:22 +00:00
Yang Tse
b17ca44f0b
fix test # 558 and 559 CFLAGS
2008-10-28 00:35:08 +00:00
Yang Tse
9230708e47
don't skip tests 558 and 559 on i686 icc autobuilds
2008-10-27 20:09:35 +00:00
Yang Tse
92f3b3895e
test #558 tests internal hash create/destroy
...
test #559 tests internal hash create/add/destroy
2008-10-27 20:01:58 +00:00
Yang Tse
310d842b70
Skip test #558 when libcurl is built with hidden symbols
2008-10-27 14:02:50 +00:00
Yang Tse
1498de83d6
For tracing purposes log a fake call to getaddrinfo
...
when allocating/building the fake Curl_addrinfo.
2008-10-27 08:20:36 +00:00
Yang Tse
39e5fa6ae8
avoid using Curl_ip2addr(), simply build up a fake Curl_addrinfo
2008-10-27 03:00:47 +00:00
Yang Tse
dc289aa4fa
convert test #558 into something more interesting, attempting
...
now to minimally exercise some internal hash routines.
2008-10-26 21:40:20 +00:00
Yang Tse
6db8f53445
test #558 verifies loop operation using malloc() and free()
2008-10-26 03:03:29 +00:00
Yang Tse
068ba17e21
moved some definitions from tftp.h to tftpd.c
2008-10-23 14:34:08 +00:00
Yang Tse
4d10c96aa6
fix compiler warning
2008-10-23 14:07:28 +00:00
Dan Fandrich
9391d980c3
Tweaked a few tests to test proper Turkish locale handling
2008-10-23 01:53:27 +00:00
Yang Tse
81e48ada47
For i686 icc autobuilds:
...
Re-enable all tests for debug-enabled builds.
For debug-disabled builds only 8 tests are enabled.
2008-10-22 15:03:15 +00:00
Dan Fandrich
7ff38c14a9
Fixed some problems with SFTP range support to fix test cases 634 through 637.
2008-10-21 07:10:25 +00:00
Dan Fandrich
7ded272b94
Added missing HTTP proxy and other keywords
2008-10-16 21:34:34 +00:00
Dan Fandrich
357383159e
A <precheck> command is considered to have failed if it returns a non-zero
...
return code. This way, if the precheck command can't be run at all for
whatever reason, it's treated as a precheck failure which causes the
test to be skipped.
2008-10-15 17:41:02 +00:00
Yang Tse
e16bccbb91
attempt to fix compiler warning:
...
`variable' might be clobbered by `longjmp' or `vfork'
2008-10-14 17:35:25 +00:00
Dan Fandrich
a102c2c22b
Don't rely on shell support to run multiple precheck tests
2008-10-13 20:41:02 +00:00
Dan Fandrich
d74d3fe851
Ensure the IPv6 stack is operational before running this test (other tests
...
use the startup of the IPv6 test server as a substitute check for this).
2008-10-12 05:27:26 +00:00
Dan Fandrich
5ecff1e4c3
Added HTTP as a required feature
2008-10-09 18:53:17 +00:00
Dan Fandrich
f6d80d66a2
Added tests 633 through 637 to test the new file range support for SFTP.
...
All but the first test cause an infinite loop or other failure and so
are added to DISABLED.
2008-10-09 05:16:06 +00:00
Daniel Stenberg
830018aa38
- Bug #2152270 ( http://curl.haxx.se/bug/view.cgi?id=2152270 ) identified and
...
fixed a CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing:
Any subsequent transfer with a redirect leaks memory, eventually crashing
the process potentially.
Any subsequent transfer WITHOUT a redirect causes the most recent redirect
that DID occur on some previous transfer to still be reported.
2008-10-08 22:01:23 +00:00
Dan Fandrich
8dfddd279b
Added tests 1082 through 1085 to test symbolic --interface parameters
2008-10-08 21:46:55 +00:00
Dan Fandrich
11a8a25528
Created test cases 1080 and 1081 to reproduce a problem of
...
CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when
two URLs are requested. Reported by vmpdemo in bug #2152270
2008-10-08 03:32:10 +00:00
Dan Fandrich
95456b8e78
Added const to some pointer variables
2008-10-08 01:17:51 +00:00
Dan Fandrich
b9ce871463
Changed the handling of read/write errors in Curl_perform() to allow a
...
a fresh connection to be made in such cases and the request retransmitted.
This should fix test case 160. Added test case 1079 in an attempt to
test a similar connection dropping scenario, but as a race condition, it's
hard to test reliably.
2008-10-07 23:15:02 +00:00
Dan Fandrich
feeabd08ab
Document how to disable tests when certain --disable-* flags are used.
2008-10-07 20:28:25 +00:00
Yang Tse
445e4a9792
revert change introduced in tftpd.c revision 1.44
2008-10-03 03:42:44 +00:00
Yang Tse
9cea2dfb8f
fix compiler warning: dereferencing type-punned pointer will break strict-aliasing rules
2008-10-02 14:44:18 +00:00
Yang Tse
26a651f7ae
fix compiler warning: variable' might be clobbered by
longjmp' or `vfork'
2008-10-02 13:28:10 +00:00
Yang Tse
ac0e0351a0
runtests.pl enables picky compiler warnings unless explicitly disabled
2008-10-02 03:59:25 +00:00
Dan Fandrich
88513d2d1a
Fixed some compiler warnings with gcc
2008-10-01 17:34:24 +00:00
Dan Fandrich
d3fdbe48ae
Added "HTTP proxy" keyword
2008-09-30 17:18:27 +00:00
Daniel Stenberg
038542ea3e
- The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE
...
gets a 550 response back for the cases where a download (or NOBODY) is
wanted. It still allows a 550 as response if the SIZE is used as part of an
upload process (like if resuming an upload is requested and the file isn't
there before the upload). I also modified the FTP test server and a few test
cases accordingly to match this modified behavior.
2008-09-30 09:51:58 +00:00
Dan Fandrich
372203f1fa
Added "HTTP proxy" and "proxytunnel" keywords where applicable
2008-09-29 22:44:04 +00:00
Yang Tse
a632f6d5b1
if a test execution is aborted due to a signal, and the process
...
returns no other exitcode, use 2000 + signal number as return code
2008-09-26 18:56:56 +00:00
Yang Tse
42271ad463
use shift right. Division result is not integral.
2008-09-26 14:08:33 +00:00
Yang Tse
57ee847ce7
Avoid the use of the '? :' operator inside the call to our
...
test-server logging function. It doesn't work on some systems.
2008-09-26 11:21:22 +00:00
Yang Tse
985bd18904
attempt to avoid HTTP server startup misdetection on some systems
2008-09-26 01:08:24 +00:00
Yang Tse
2d1f798d14
fix potential buffer overflow in test-server logging function
2008-09-26 00:17:01 +00:00
Yang Tse
82107a02f5
Re-enable test #100 on i686 icc autobuilds
2008-09-24 01:29:23 +00:00
Daniel Stenberg
42224594b6
remove the entire comment now when we no longer set TZ
2008-09-23 11:02:56 +00:00
Daniel Stenberg
d369a2b775
- Introducing Jamie Lokier's function for date to epoch conversion used in the
...
date parser function. This makes our function less dependent on system-
provided functions and instead we do all the magic ourselves. We also no
longer depend on the TZ environment variable.
2008-09-23 11:00:01 +00:00
Daniel Stenberg
391e8afd1f
- Made the SOCKS code use the new Curl_read_plain() function to fix the bug
...
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html
- recv() errors other than those equal to EAGAIN now cause proper
CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now
disabled it until we can figure out another way to exercise that logic.
2008-09-22 23:12:00 +00:00
Daniel Stenberg
de48e4e4df
better description
2008-09-22 21:33:18 +00:00
Yang Tse
1e076a4ae0
Re-enable tests #1 on i686 icc autobuilds
2008-09-22 18:55:42 +00:00
Dan Fandrich
abe61b9926
Fixed test 539 to handle an out of memory condition that shows up now
...
that memdebug.h is included in the test programs.
2008-09-22 17:20:29 +00:00
Yang Tse
2b767161da
fix compiler warning: defined but not used
2008-09-21 04:02:13 +00:00
Yang Tse
7c9631081d
fix compiler warning: external declaration in primary source file
2008-09-21 03:48:25 +00:00
Yang Tse
b6f29bef06
fix compiler warning: defined but not used
2008-09-21 02:35:20 +00:00
Yang Tse
fe5f448015
fix compiler warning: external definition with no prior declaration
2008-09-20 12:33:02 +00:00
Yang Tse
7beb473a3d
include "memdebug.h"
2008-09-20 04:26:55 +00:00
Yang Tse
f7ef60c13f
fix compiler warning: external definition with no prior declaration
2008-09-18 19:17:28 +00:00
Yang Tse
8b2bfa4212
fix compiler warning: external definition with no prior declaration
2008-09-18 19:02:40 +00:00
Yang Tse
a6c915aab9
fix compiler warning: external declaration in primary source file
2008-09-18 16:21:09 +00:00
Dan Fandrich
974145f61c
Changed the test data file so it passes an XML syntax check
2008-09-15 22:35:09 +00:00
Yang Tse
eae27d1788
Disable all tests on i686 icc autobuilds to inspect build messages
2008-09-08 16:50:04 +00:00
Dan Fandrich
c3d871aef4
Added HTTP 1.0 downgrade tests with proxies
2008-09-06 18:24:04 +00:00
Yang Tse
59e378f48f
remove unnecessary typecasting of malloc()
2008-09-06 05:29:05 +00:00
Dan Fandrich
91ff938035
Improved the logic the decides whether to use HTTP 1.1 features or not in a
...
request.
Detect cases where an upload must be sent chunked and the server supports
only HTTP 1.0 and return CURLE_UPLOAD_FAILED.
2008-09-05 17:58:53 +00:00
Daniel Stenberg
18110b519c
- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames
...
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
2008-09-05 16:13:20 +00:00
Daniel Stenberg
780f13db30
Stefan Krause's mail to curl-library at 03 Sep 2008 made me add these two
...
new date strings to get tested too.
2008-09-05 08:15:21 +00:00
Yang Tse
8733e087d7
fix print formatting string directives
2008-09-04 05:29:10 +00:00
Dan Fandrich
85a79f9d67
Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1
...
to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072
and 1073 are similar to test 1069 in that they involve the impossible
scenario of sending chunked data to a HTTP 1.0 server. All these currently
fail and are added to DISABLED.
Added test 1075 to test --anyauth with Basic authentication.
2008-08-29 23:42:39 +00:00
Daniel Stenberg
d24465b79a
test 1070 added
2008-08-29 10:48:27 +00:00
Daniel Stenberg
c67a99ff27
- When libcurl was doing a HTTP POST and the server would respond with
...
"Connection: close" and actually close the connection after the
response-body, libcurl could still have outstanding data to send and it
would not properly notice this and stop sending. This caused weirdness and
sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222
Note that there are still reasons to consider libcurl's behavior when
getting a >= 400 response code while sending data, as Craig Perras' note
"http upload: how to stop on error" specifies:
http://curl.haxx.se/mail/archive-2008-08/0138.html
2008-08-29 10:47:59 +00:00
Daniel Stenberg
e138ae5ec9
- I'm abandoning the system with the web site mirrors (but keeping download
...
files bing mirrored) and thus I've changed the URL in the cookiejar header
to no longer use curlm.haxx.se but instead use the main site curl.haxx.se
2008-08-28 11:35:54 +00:00
Dan Fandrich
8ce78ca488
Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to set
...
the HTTP method to GET (or HEAD) when given a value of 0.
2008-08-28 06:28:07 +00:00
Dan Fandrich
370c3afc71
Added test 1069 to test PUT from stdin without content length. It fails
...
in a similar manner to test 1065 so is added to DISABLED.
2008-08-28 02:24:46 +00:00
Dan Fandrich
93357ef017
Added test 1069 to test PUT from stdin without content length. It fails
...
in a similar manner to test 1065 so is added to DISABLED.
2008-08-28 02:18:44 +00:00
Dan Fandrich
753592cc70
Added test case 1068 to do a simple HTTP PUT from stdin
2008-08-28 02:03:54 +00:00
Dan Fandrich
fc09d10560
Added multi keyword
2008-08-26 20:21:59 +00:00
Dan Fandrich
59b2e3ea4a
Added multi keyword
2008-08-26 20:11:12 +00:00
Yang Tse
d744c85310
Re-enable all tests on x86_64 and ia64.
2008-08-24 23:26:07 +00:00
Yang Tse
62d94ff342
Fix wrong signed int formatting string directive in test case #557 .
...
This error did not cause test failures on systems where sizeof(int) == sizeof(long).
2008-08-24 17:10:24 +00:00
Yang Tse
71d3c5bf41
Disable all tests except #557 on x86_64 and ia64 to debug trace curl_mprintf() on these systems.
2008-08-24 15:57:52 +00:00
Daniel Stenberg
b34390017b
added test case 1067 to verify --referer "firstone.html;auto"
2008-08-23 21:27:58 +00:00
Daniel Stenberg
a604682805
Andy Tsouladze's fix to kill the knowledge of servers properly after they have
...
been killed.
2008-08-23 11:25:14 +00:00
Dan Fandrich
e3ad6d2bd1
Fixed a problem when --dump-header - was given with more than one URL,
...
which caused an error when the second header was dumped due to stdout
being closed. Added test case 1066 to verify. Also fixed a potential
problem where a closed file descriptor might be used for an upload
when more than one URL is given.
2008-08-22 22:57:25 +00:00
Yang Tse
e5b713ee63
Increase to 20 the number of CVS update retries.
2008-08-22 18:18:20 +00:00
Yang Tse
95cef39def
Test case 557 now also verifies signed and unsigned int formatting.
2008-08-21 05:19:40 +00:00
Yang Tse
1c68e79091
Simplify condition check
2008-08-20 23:29:07 +00:00
Yang Tse
3e0b6a7d1f
Update test case 557
2008-08-18 18:52:13 +00:00
Yang Tse
2f71461b29
Added test case 557 to verify libcurl's internal curl_m*printf() functions
...
formatting functionality when handling signed and unsigned longs, as well as
our curl_off_t data type.
2008-08-18 09:58:08 +00:00
Yang Tse
ac18b471d2
libcurl internal base64.h header file renamed to curl_base64.h
2008-08-17 00:25:38 +00:00
Dan Fandrich
a923d8541c
Added test case 1065 to test a PUT with a single file but two URLs. This
...
was discovered to be problematic while investigating an incident reported by
Von back in May. curl in this case doesn't include a Content-Length: or
Transfer-Encoding: chunked header which is illegal. This test case is
added to DISABLED until a solution is found.
2008-08-15 19:18:46 +00:00
Dan Fandrich
527a5f0980
Added Range keyword
2008-08-14 19:18:18 +00:00
Dan Fandrich
6e878d2ca4
Added test 1063 to test an invalid large range on a file:
2008-08-14 19:18:01 +00:00
Dan Fandrich
7eab7fa353
Fixed a buffer overflow problem in Curl_proxyCONNECT that could occur
...
when a server responded with long headers and data. Luckily, the buffer
overflowed into another unused buffer, so no actual harm was done.
Added test cases 1060 and 1061 to verify.
2008-08-12 20:07:52 +00:00
Dan Fandrich
9ee7a014c9
Handle short reads
2008-08-12 18:32:55 +00:00
Daniel Stenberg
14a5596346
- Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel
...
_directory_ if that happened to appear in the path!
2008-08-12 07:21:39 +00:00
Dan Fandrich
e8e8177e9d
Added HTTP CONNECT keywords
2008-08-11 23:16:48 +00:00
Dan Fandrich
f1fe04245a
Fixed a boundary condition error in ftp_readresp() whereby a non-terminal
...
line of a multiline FTP response whose last byte landed exactly at the end
of the BUFSIZE-length buffer would be treated as the terminal response
line. The following response code read in would then actually be the
end of the previous response line, and all responses from then on would
correspond to the wrong command. Test case 1062 verifies this.
Stop closing a never-opened ftp socket.
2008-08-11 23:16:08 +00:00
Yang Tse
3a1d28379a
Die when curlbuild.h is not created or available
2008-08-11 00:15:20 +00:00
Yang Tse
68cfe929c4
Fix NetWare curlbuild.h
...
NetWare curlbuild.h settings depend on whether LIBC or CLIB is used.
The NetWare specific Makefile is capable of knowing which target is being built.
So, finally, the NetWare Makefile will take care of generating curlbuild.h
2008-08-10 18:33:41 +00:00
Yang Tse
b023f9bd2a
When running testcurl.pl display definitions from curlbuild.h
2008-08-09 23:14:40 +00:00
Yang Tse
f01d18e4b9
Reintroduce the adjustment previously done in testcurl.pl so that it copies the
...
CVS checked out curlbuild.h.dist as curlbuild.h for any non-configure target
when host system is not running buildconf.bat.
All the curlbuild.h stuff was done taking in consideration that no adjustment
would be needed in non-configure makefiles.
As it is documented, when trying to build on non-configure capable systems or on
systems which for any reason don't run the true configure script, it is required
to have the proper curlbuild.h in place before calling any makefile.
Due to the hardcore memory debugging stuff c-ares enabled debug builds also need
the file in the proper place before attempting to build c-ares.
2008-08-08 12:34:01 +00:00
Dan Fandrich
fa001f27a5
Made ftp a required feature
2008-08-08 07:51:50 +00:00
Dan Fandrich
40b2e06a7f
Added test1059 to test the FTP proxy tunnel problem fixed July 11.
2008-08-08 07:26:30 +00:00
Yang Tse
8008499028
Peek at predefined symbols done. and now removed.
...
Netware's autobuilds gcc can not been told apart from a standard built gcc.
2008-08-08 05:58:08 +00:00
Yang Tse
8d36acd29b
Take a peek at netware's gcc predefined symbols.
2008-08-08 03:09:16 +00:00
Yang Tse
f6a958dc3a
Remove last adjustment done to testcurl.pl to verify if change introduced by
...
Guenter Knauf in lib/Makefile.netware is enough to get the netware autobuilds
going again.
2008-08-07 22:40:06 +00:00
Yang Tse
a7d52c414f
Adjust testcurl.pl to copy checked out curlbuild.h.dist as curlbuild.h
...
for non-configure targets when host system doesn't run buildconf.bat.
2008-08-07 20:41:12 +00:00
Yang Tse
14240e9e10
Initial support of curlbuild.h and curlrules.h which allows
...
to have a curl_off_t data type no longer gated to off_t.
2008-08-07 00:29:08 +00:00
Daniel Stenberg
3a499099af
- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and
...
proved how PUT and POST with a redirect could lead to a "hang" due to the
data stream not being rewound properly when it had to in order to get sent
properly (again) to the subsequent URL. This is now fixed and these test
cases are no longer disabled.
2008-08-04 22:00:22 +00:00
Daniel Stenberg
8d012181b0
- Test case 1041 (added by Daniel Fandrich April 14th) proved a bug where PUT
...
with -C - sent garbage in the Content-Range: header. I fixed this problem by
making sure libcurl always sets the size of the _entire_ upload if an app
attemps to do resumed uploads since libcurl simply cannot know the size of
what is currently at the server end. Test 1041 is no longer disabled.
2008-08-03 22:20:58 +00:00
Dan Fandrich
6838fb32af
Improved title
2008-08-03 05:13:05 +00:00
Dan Fandrich
f27299dc3b
Added tests 1057 and 1058 to test FTP and HTTPS transfers with ranges
...
relative to end of file.
2008-08-01 22:12:34 +00:00
Dan Fandrich
9251dd7b24
User names embedded in proxy URLs without a password were parsed
...
incorrectly--the host name is treated as part of the user name and the
port number becomes the password. This can be observed in test 279
(was KNOWN_ISSUE #54 ).
2008-08-01 02:09:08 +00:00
Dan Fandrich
b13b9f3331
Fixed keyword
2008-07-31 05:00:02 +00:00
Dan Fandrich
108e584983
Added keywords
2008-07-31 02:51:44 +00:00
Dan Fandrich
f3b4071209
Added test of IPv6 scope handling
2008-07-31 02:38:51 +00:00
Yang Tse
0de08d418f
s/silly/underquoted definition/
2008-07-31 01:41:20 +00:00
Dan Fandrich
bc649593e4
Added test cases 1052 through 1055 to test uploading data from files
...
during redirects. Test cases 1052 and 1055 show problems (maybe the same
root cause as 1051) and are disabled.
2008-07-30 21:04:44 +00:00
Dan Fandrich
1f26ea4a85
Added test case 1051 to test Location: following with PUT, as reported
...
by Ben Sutcliffe. The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
2008-07-30 07:24:59 +00:00
Yang Tse
912c29fd8c
Undo using the sreadfrom() wrapper to replace recvfrom() in our code, for real ;-)
2008-07-30 06:20:43 +00:00
Yang Tse
537490e391
Undo using the sreadfrom() wrapper to replace recvfrom() in our code.
2008-07-30 05:10:42 +00:00
Yang Tse
7a588144b7
Reinstate hiding aclocal 'underquoted definition' warnings.
2008-07-30 04:42:16 +00:00
Dan Fandrich
adc032e7d8
Return an error code when extra files are found in filecheck:
2008-07-29 18:57:01 +00:00
Dan Fandrich
4ff37a4ed1
Added test case 1050 to test --ftp-port with an IPv6 address.
...
Made --interface tests less restrictive on host address.
2008-07-29 01:05:28 +00:00
Dan Fandrich
f042a7419d
Added test cases 1045 through 1049 as simple tests of --interface using the
...
localhost interface.
2008-07-28 18:39:32 +00:00
Dan Fandrich
b6b03c8ab9
Added feature in runtests.pl to select tests based on key word.
2008-07-27 02:34:27 +00:00
Dan Fandrich
e06944438a
Added test 1044 to test large file support in ftp with -I.
2008-07-26 20:09:36 +00:00
Yang Tse
b217e6eed7
No longer hide aclocal 'underquoted definition' warnings.
...
http://sources.redhat.com/automake/automake.html#Extending-aclocal documents
that starting with Automake 1.8, aclocal will warn about all underquoted calls
to AC_DEFUN due to the fact that in a single aclocal run it might include more
than once all .m4 files which it finds available, this includes .m4 files from
other software packages.
If the first argument to AC_DEFUN is underquoted and the same macro is included
more than once, successive inclusions after the first one will expand the macro
instead of assuming it is the same as the first one included.
2008-07-26 00:19:03 +00:00
Dan Fandrich
932b589780
Changed the long logfile elision code in runtests.pl to properly handle
...
lines ending in \r.
2008-07-24 02:16:48 +00:00
Dan Fandrich
27c282a6ee
Mention that the test harness can't check every possible feature.
2008-07-23 23:03:52 +00:00
Yang Tse
51e84c77e7
fix compiler warning: implicit conversion from "long" to "int"
2008-07-21 09:23:56 +00:00
Yang Tse
1b37baf656
Use the sreadfrom() wrapper to replace recvfrom() in our code.
2008-07-21 03:06:07 +00:00
Dan Fandrich
ed2dbefa73
Fixed the XML syntax of a few test files.
2008-07-17 22:39:23 +00:00
Yang Tse
1e7125ae7b
add comment for include paths
2008-07-15 05:46:49 +00:00
Dan Fandrich
aa4a7471dd
Added test1042 and test1043 to test -C - on HTTP.
2008-07-15 04:12:15 +00:00
Dan Fandrich
69a03ce23c
Added test1040 and test1041 to test -C - on HTTP. Test 1041 failed so it's
...
added to DISABLED.
2008-07-15 03:36:38 +00:00
Dan Fandrich
336992cc54
Fixed test 553 to pass the torture test.
2008-07-11 18:23:06 +00:00
Dan Fandrich
13afcbd1eb
Avoid a potential zombie process when killing an old ftpserver
2008-07-11 17:18:37 +00:00
Dan Fandrich
8d49a8f278
Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp
...
uploads with -C - didn't resume properly, but the tests pass.
2008-07-11 05:08:06 +00:00
Yang Tse
d8f109176c
fallback to gettimeofday when monotonic clock is unavailable at run-time
2008-07-10 07:16:45 +00:00
Dan Fandrich
bbb1b99ce1
Added tests 1036 and 1037 to verify resumed ftp downloads with -C -
2008-07-10 06:09:03 +00:00
Dan Fandrich
60f0b4fffe
Fixed test 554 to pass the torture test.
2008-07-08 21:16:18 +00:00
Dan Fandrich
a25959184e
Added test cases 1034 & 1035 to test IDN name conversion failures.
2008-07-07 23:52:52 +00:00
Daniel Stenberg
0e5da5b8bc
- Scott Barrett provided a test case for a segfault in the FTP code and the
...
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
2008-07-07 20:37:07 +00:00
Daniel Stenberg
82412f218f
Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx
...
response codes. Previously libcurl would hang on such occurances. I added
test case 1033 to verify.
2008-07-03 08:47:53 +00:00
Daniel Stenberg
d92945bb8a
- Eduard Bloch filed the debian bug report #487567
...
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567 ) pointing out that
libcurl used Content-Range: instead of Range when doing a range request with
--head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to
verify.
2008-06-22 20:38:16 +00:00
Dan Fandrich
a837bd08b0
Edited some test keywords for consistency
2008-06-21 17:56:48 +00:00
Dan Fandrich
70d834c512
Always use $LOGDIR when referring to the log directory.
2008-06-19 01:12:02 +00:00
Dan Fandrich
5304b13365
Added SSH failure test cases 628-632
2008-06-19 00:18:58 +00:00
Daniel Stenberg
2d0fea2650
fixed the language somewhat
2008-06-13 20:45:34 +00:00
Dan Fandrich
024c7641a9
Added IPv6 keywords for some more tests that require IPv6 networking support
2008-06-12 23:50:57 +00:00
Daniel Stenberg
5abfdc0140
- curl the tool now deals with its command line options somewhat differently!
...
All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
2008-06-08 20:53:49 +00:00
Daniel Stenberg
930a45e7a9
- Added CURLINFO_PRIMARY_IP as a new information retrievable with
...
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
2008-06-06 17:33:35 +00:00
Daniel Stenberg
e7b5a8e6cb
curl returns 0 for these options now
2008-06-01 22:10:21 +00:00
Daniel Stenberg
27eaf0cf02
now returns 0
2008-06-01 22:04:09 +00:00
Daniel Stenberg
f7815fa93c
- Bug report #1973352 ( http://curl.haxx.se/bug/view.cgi?id=1973352 ) identified
...
how the HTTP redirect following code didn't properly follow to a new URL if
the new url was but a query string such as "Location: ?moo=foo". Test case
1031 was added to verify this fix.
2008-05-26 20:39:41 +00:00
Dan Fandrich
d31da176eb
Made sure to pass longs in to curl_easy_setopt where necessary in the
...
libtest code.
2008-05-22 21:49:52 +00:00
Daniel Stenberg
c1dfe2c529
wait for all 129 bytes
2008-05-13 21:43:37 +00:00
Daniel Stenberg
7f88e8badb
Added test case 556 that uses curl_easy_send() and curl_easy_recv()
2008-05-13 21:42:07 +00:00
Yang Tse
ed80eb5b0f
configure script will now define HAVE_CLOCK_GETTIME_MONOTONIC symbol only
...
when function clock_gettime() is available and the monotonic timer is
also available. Otherwise, in some cases, librt or libposix4 could be used
for linking even when finally not using the clock_gettime() function due
to lack of the monotonic clock.
2008-05-12 02:04:21 +00:00
Yang Tse
60dd765b3d
fix syntax error: missing semicolon
2008-05-10 23:50:55 +00:00
Yang Tse
19479ea021
Internal time differences now use monotonic time source if available.
...
This also implies the removal of the winmm.lib dependency for WIN32.
2008-05-09 16:31:51 +00:00
Daniel Stenberg
fc9e0d2249
- Ben Van Hof filed bug report #1945240 : "libcurl sometimes sends body twice
...
when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240 ).
The problem was that when libcurl rewound a stream meant for upload when it
would prepare for a second request, it could accidentally continue the
sending of the rewound data on the first request instead of on the second.
Ben also provided test case 1030 that verifies this fix.
2008-05-03 21:45:12 +00:00
Dan Fandrich
45edad84cb
Document that variable replacement now takes place in the test file <stdout> section.
2008-05-01 17:48:00 +00:00
Daniel Stenberg
fd31f7e7e5
use variables to support other IPs and port numbers
2008-05-01 10:52:12 +00:00
Daniel Stenberg
7b2531da24
do variable replacement in the stdout data read from the test case
2008-05-01 10:51:16 +00:00
Dan Fandrich
848a13654d
Added precheck for hard-coded test server address and port
2008-05-01 00:20:01 +00:00
Dan Fandrich
1cca8f5a30
Made file XML compatible
2008-05-01 00:18:16 +00:00
Daniel Stenberg
852989856d
- To make it easier for applications that want lots of magic stuff done on
...
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
2008-04-30 21:20:08 +00:00
Dan Fandrich
ab71654078
Added test 1028 to test an HTTP redirect to a FTP URL.
2008-04-29 02:30:09 +00:00
Yang Tse
b8193b6321
tests/libtest/delay.pl no longer used. The 'delay' attribute of the
...
test harness <command> subsection now provides this functionality.
2008-04-25 11:01:26 +00:00
Yang Tse
113d0937de
Add 'timeout' and 'delay' attributes support for the test harness <command> subsection
2008-04-25 04:19:50 +00:00
Yang Tse
e0f0a2ccee
<postcheck> delay no longer needed for this test.
...
http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:58:00 +00:00
Yang Tse
96edebf4d9
improve synchronization between test harness runtests.pl script
...
and test harness servers to minimize risk of false test failures.
http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:55:34 +00:00
Yang Tse
ad1dd08693
fix minor memory leak triggered upon test failure
2008-04-22 13:07:27 +00:00
Yang Tse
95fd093c4a
Remove fflush() + fsync() previously introduced accelerated writing of
...
server input and response request files of the test harness sws server.
Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.
http://curl.haxx.se/mail/lib-2008-04/0385.html
2008-04-22 12:40:05 +00:00
Yang Tse
ed1ad28e29
Remove previously introduced small delay to verify if it can be avoided
...
with the accelerated writing of server input and response request files
in test harness sws server.
2008-04-22 00:23:18 +00:00
Dan Fandrich
768e3e796e
Ignore the result of the postcheck command in torture mode
2008-04-21 17:19:44 +00:00
Dan Fandrich
3869d4a3a7
Make the test work with nroffs that use special escaping for bold output.
2008-04-21 16:57:27 +00:00
Yang Tse
a87c468c5c
accelerate the writing of server input and response request files
...
to disk, trying to defeat file and disk write-behind algorithms
2008-04-20 19:15:08 +00:00
Dan Fandrich
7abf50a5c0
Added test cases 1026 and 1027 to do some rudimentary tests on the --manual
...
and --help options.
2008-04-18 22:31:52 +00:00
Yang Tse
d3f46eb61b
test 1001 needs a small delay between client part execution and test
...
result file verifications to allow the test server to completely write
out all files
2008-04-18 17:25:54 +00:00
Yang Tse
72c58b0d1d
test 1001 needs a small delay between client part execution and test
...
result file verifications to allow the test server to completely write
out all files
2008-04-18 17:17:14 +00:00
Yang Tse
6c89e1b311
fix compiler warning: enumerated type mixed with another type
2008-04-17 11:59:46 +00:00
Daniel Stenberg
0331071346
Added test case 555, a variation of 547 but using multi interface instead of
...
easy. This was reported not working by Penugonda Chenna Reddy in
http://curl.haxx.se/mail/lib-2008-04/0046.html but I fail to repeat that
problem.
2008-04-16 21:11:46 +00:00
Dan Fandrich
a9591ad1b7
Added test case 1025 to test a command-line cookie with Location: following
2008-04-10 18:18:55 +00:00
Dan Fandrich
c97d112b30
Added test case 1024 to test a scenario similar to the one reported
...
by Ben Combee where libcurl would send the wrong cookie to a redirected
server. libcurl was doing the right thing in this test case.
2008-04-10 04:21:08 +00:00
Yang Tse
6fd3ff4032
fix compiler warning: argument is incompatible with corresponding format string conversion
2008-04-07 15:40:49 +00:00
Yang Tse
532d4b5106
SunSSH sshd ignores UsePrivilegeSeparation option
2008-04-04 14:47:32 +00:00
Yang Tse
5788719988
SunSSH 1.2 options sync
2008-04-04 14:08:36 +00:00
Daniel Stenberg
ac0b911eda
oops, forgot to add test554
2008-04-04 11:39:32 +00:00
Dan Fandrich
10232bfe9e
Added test627 to test SFTP with CURLOPT_NOBODY
2008-04-04 02:06:35 +00:00
Daniel Stenberg
a2314225e0
- Added CURLFORM_STREAM as a supported option to curl_formadd() to allow an
...
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
2008-03-31 10:02:23 +00:00
Dan Fandrich
7f7b643c0d
Made the test work on perl 5.00
2008-03-28 18:19:11 +00:00
Daniel Stenberg
95bd901efe
- Fixed the problem with doing a zero byte SCP transfer, verified with test
...
case 617 (which was added by Daniel Fandrich 5 Mar 2008).
2008-03-22 22:00:21 +00:00
Gunter Knauf
c0a30b04c2
added --extvercmd parameter which can be used to specify an external command to display 'curl --version', f.e. with MinW32 crosscompile --extvercmd=/usr/bin/wine can be used.
2008-03-20 16:10:54 +00:00
Dan Fandrich
e9a460411f
Fixed an infinite loop when given an invalid SFTP quote command.
2008-03-18 22:59:04 +00:00
Dan Fandrich
a57098ea9b
Added test 626 to reproduce an infinite loop when given an invalid
...
SFTP quote command reported by Vincent Le Normand, but left it disabled.
2008-03-18 17:05:29 +00:00
Dan Fandrich
942daece00
Spell the commands right
2008-03-15 01:03:23 +00:00
Dan Fandrich
040a4443a1
Added tests 622-625 to test SFTP/SCP uploads. Test 625 was an attempt to
...
reproduce the --ftp-create-dirs problem reported by Brian Ulm, but that
seems to need a call curl_easy_reset() which this test case doesn't do.
2008-03-13 22:51:39 +00:00
Daniel Stenberg
fc9ad03e66
updated according to the name resolve race condition fix just committed
2008-03-11 22:58:52 +00:00
Dan Fandrich
458925ae0b
Added tests 618-621 to test SFTP/SCP transfers of more than one file
...
(test 620 tests the just-fixed problem reported by Brian Ulm).
2008-03-10 19:40:27 +00:00
Michal Marek
e44dc92197
fixed typo
2008-03-10 14:32:19 +00:00
Dan Fandrich
b16ea66cec
Added tests 616 and 617 to see how SFTP and SCP cope with zero-length
...
files, as questioned by Mike Protts. SFTP does for me but SCP doesn't
so test 617 is disabled for now.
2008-03-06 01:15:28 +00:00
Dan Fandrich
80cec5a62a
Fixed the test harness so it will write out zero-length data files.
2008-03-06 01:11:43 +00:00
Yang Tse
6c2c281a7e
fix log message used when unable to connect to destination port
2008-03-05 18:27:31 +00:00
Yang Tse
18cbb4d7d6
signal handling to properly cleanup on SIGINT and SIGTERM
2008-02-28 10:15:21 +00:00
Yang Tse
22e84d92b7
when terminating do it falling through cleanup code
2008-02-28 10:13:07 +00:00
Yang Tse
3d74649908
avoid inclusion of setup.h in util.h
2008-02-28 09:38:32 +00:00
Yang Tse
ed63d9d4de
header inclusion cleanup
2008-02-28 00:55:06 +00:00
Yang Tse
8adc7038fe
make comment more precise
2008-02-27 14:54:18 +00:00
Daniel Stenberg
b12fef3f31
Michal Marek's cleanup of how curl_easy_setopt() is used in examples and
...
test code. Thanks to his curl_easy_setopt() typechecker work...
2008-02-27 09:06:15 +00:00
Gunter Knauf
97a41f3646
trial to fix the HP-UX breakage...
2008-02-26 23:06:15 +00:00
Yang Tse
058e764af8
all reads from stdin and writes to stdout will be retried until the
...
whole operation completes or an unrecoverable condition is detected
2008-02-26 18:13:59 +00:00
Yang Tse
0d09f342c4
refactor some code out to write_pidfile() in util.c
2008-02-26 15:06:44 +00:00
Yang Tse
1d95109ffa
Revert sockfilt.c back to revision 1.42
...
Changes introduced in revision 1.43 were useless
2008-02-22 09:31:18 +00:00
Yang Tse
064eebeaf1
Avoid timeout restart when signal caught while awaiting socket and stdin events
2008-02-20 17:17:18 +00:00
Daniel Stenberg
e6170eb20d
- Fixed test case 405 to not fail when libcurl is built with GnuTLS
2008-02-20 12:18:08 +00:00
Daniel Stenberg
2c80bcbc81
made the non-matching error code output nicer since we know it is a number
...
and the string contains a newline...
2008-02-20 12:14:31 +00:00
Daniel Stenberg
55700cb01f
- We no longer support setting the CURLOPT_URL option from inside a callback
...
such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location:
following. The patch that introduced this feature was done for 7.11.0, but
this code and functionality has been broken since about 7.15.4 (March 2006)
with the introduction of non-blocking OpenSSL "connects".
It was a hack to begin with and since it doesn't work and hasn't worked
correctly for a long time and nobody has even noticed, I consider it a very
suitable subject for plain removal. And so it was done.
2008-02-20 08:28:02 +00:00
Dan Fandrich
0cae201044
Added test309 to test HTTP redirect to HTTPS URL
2008-02-19 21:57:41 +00:00
Yang Tse
9df37b93df
juggle() actually returns bool.
...
Remove redundant and unreachable log message.
2008-02-19 18:51:08 +00:00
Yang Tse
c9eb41c056
Reduce to 20 seconds the time allowed to set SO_REUSEADDR option on sockfilt listener socket.
...
Log some more error descriptions.
2008-02-18 20:13:30 +00:00
Yang Tse
23547fa2a0
sockfilt will quit when orphaned
2008-02-17 04:36:08 +00:00
Daniel Stenberg
11fae450fa
make this test disabled properly when built with yassl
2008-02-13 21:36:24 +00:00
Yang Tse
cf9259dd92
verifyserver() actually returns the pid of the unsecure http and ftp servers
...
when verifying the https and ftps servers
2008-02-13 06:06:57 +00:00
Yang Tse
6634e3c3a3
On heavily loaded systems any test server start up can take longer than the
...
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.
To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
2008-02-12 13:47:56 +00:00
Yang Tse
533ae704a1
fix grammatical issues
2008-02-12 01:11:55 +00:00
Yang Tse
dc9fe9c361
shell startup scripts and possible influence in scp/sftp/socks tests
2008-02-11 20:21:06 +00:00
Dan Fandrich
75c369dcca
Disable test due to keyword before disabling due to bad server.
2008-02-11 20:10:36 +00:00
Yang Tse
8f9e0357dd
Additional SunSSH 1.1 ssh server options
2008-02-11 14:28:48 +00:00
Yang Tse
6942d313ff
Verify only once test harness sftp server connectivity and functionality.
...
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
2008-02-10 02:52:17 +00:00
Dan Fandrich
15e56c3284
Fixed some XML parsing problems.
2008-02-09 02:37:31 +00:00
Dan Fandrich
fc1443dcfc
Added key words to all SSL-using tests so they can be skipped if necessary.
...
Removed a few unnecessary requires SSL statements.
2008-02-09 02:08:34 +00:00
Dan Fandrich
59e3651af3
Fixed test to use HTTPS as documented.
2008-02-09 02:01:36 +00:00
Dan Fandrich
f01d324c83
Missed checking in these test data files.
2008-02-08 18:42:12 +00:00
Yang Tse
405e192b8c
Get rid of sftp subsystem additional parameters, they aren't widely supported
2008-02-08 17:32:58 +00:00
Yang Tse
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
Dan Fandrich
ce1649564c
Added tests 1022 and 1023 to validate output of curl-config --version and
...
--vernum
2008-02-08 01:21:03 +00:00
Yang Tse
bad6410d08
Don't try to compare more than strlen chars
2008-02-06 17:35:17 +00:00
Yang Tse
fecb67b246
Use a long int data type to handle getpid() result
2008-02-06 16:54:01 +00:00
Yang Tse
2c0956200f
Fix buffer size specification.
...
Improve handling of boundary conditions for huge requests.
2008-02-05 18:37:53 +00:00
Yang Tse
acd9d72466
Minor variable type cleanups.
...
Disable "swsbounce" mode when the received request
isn't for the same test and part number.
2008-02-05 14:43:16 +00:00
Yang Tse
cd63a461d7
proper initialization of httprequest, no longer zeroing out twice
...
the whole 150000+ bytes struct, and also removing an equally big
additional buffer for pipelining treatment.
2008-02-05 02:21:38 +00:00
Yang Tse
03bbf4de48
When possible, use additional config options for test harness ssh server,
...
which are deprecated in recent OpenSSH versions but are current for SunSSH.
2008-01-31 16:37:16 +00:00
Daniel Stenberg
a62e155ca4
- Niklas Angebrand made the cookie support in libcurl properly deal with the
...
"HttpOnly" feature introduced by Microsoft and apparently also supported by
Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly
is now supported when received from servers in HTTP headers, when written to
cookie jars and when read from existing cookie jars.
2008-01-31 12:21:57 +00:00
Daniel Stenberg
7b9435890d
add verbose output to test 509 for easier debugging
2008-01-29 23:10:25 +00:00
Daniel Stenberg
ceb5a8ca7b
- Michal Marek fixed minor mistake in test case 553 that prevented it from
...
working on other IP-addresses or port numbers.
2008-01-29 12:31:11 +00:00
Yang Tse
8fca5c2e69
Dont rely on PAMAuthenticationViaKbdInt default being 'no'
2008-01-27 02:35:20 +00:00
Daniel Stenberg
5f2055729e
added test 1021 to verify my fix for bug report #1879375
2008-01-26 00:13:38 +00:00
Yang Tse
69e540dfa6
improve request initialization for test harness HTTP server
2008-01-25 05:08:53 +00:00
Yang Tse
2198869eb1
Dmitry Kurochkin's test harness HTTP server pipelining fix fot test 530
2008-01-25 05:07:04 +00:00
Yang Tse
bdb2beb8e4
check availability of poll.h header at configuration time, and include
...
it when sys/poll.h is unavailable
2008-01-22 14:52:54 +00:00
Yang Tse
3caeb0a91f
undo using internal *printf() clones for test #530
2008-01-21 05:35:08 +00:00
Yang Tse
a4eddf0d0d
use internal *printf() clones since snprintf() not available on all platforms
2008-01-20 22:53:56 +00:00
Yang Tse
e9490fdbd9
Also disable GSSAPIAuthentication for the test harness ssh client
2008-01-20 04:05:25 +00:00
Daniel Stenberg
daadcfd1de
Dmitry Kurochkin fixed test case 530 (pipelining)
2008-01-19 10:14:45 +00:00
Yang Tse
01d95b56a0
fix failure to properly detect SSH and SOCKS servers start up on loaded systems
2008-01-18 09:18:59 +00:00
Yang Tse
0530b0a5ca
Don't abort tests 518 and 537 when unable to raise the open-file soft limit
2008-01-17 18:57:50 +00:00
Dan Fandrich
bcfc7d90d1
Put the comments in an XML-valid location.
2008-01-17 04:10:28 +00:00
Daniel Stenberg
c522f349fe
Added test 553. This test case and code is based on the bug recipe Joe Malicki
...
provided for bug report #1871269 , fixed on Jan 14 2008 before the 7.18.0
release.
2008-01-16 22:54:54 +00:00
Daniel Stenberg
6893fcaa9b
remove trailing comma too, even though I don't think it does any harm
2008-01-16 22:09:51 +00:00
Daniel Stenberg
301ae1ae1b
Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring
...
out what valgrind to run.
2008-01-16 22:08:37 +00:00
Daniel Stenberg
b3de497d83
Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support that
...
previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
2008-01-16 12:24:00 +00:00
Yang Tse
69f685056d
startnew() shouldn't return a positive pid as reported in the pidfile
...
by the spawned server itself unless it is actually alive
2008-01-14 19:28:54 +00:00
Yang Tse
502da27d65
add client features part
2008-01-13 03:27:14 +00:00
Yang Tse
5004529685
Remove hardcoded verbosity
2008-01-12 04:32:03 +00:00
Yang Tse
2b63eb8511
Ooops
2008-01-12 00:12:16 +00:00
Yang Tse
f09fe4b49f
Ooops
2008-01-11 21:59:05 +00:00
Yang Tse
35be09cf58
When verifying that test harness's SSH and SOCKS servers have been
...
started check also that the process is actually alive, since they
could have died once the pidfile was written out
2008-01-11 20:17:33 +00:00
Daniel Stenberg
08adf67969
Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it
...
already worked for FTP:// URLs
2008-01-11 14:20:41 +00:00
Yang Tse
14ff7e75e0
Temporary change to help debugging SSH server verification failures
2008-01-10 16:19:14 +00:00
Yang Tse
c249a8aa1b
Fix file Id
2008-01-09 01:11:59 +00:00
Yang Tse
fc794ae012
Add /usr/freeware/sbin and /usr/freeware/libexec to the ssh binaries
...
locations search list.
2008-01-09 00:58:48 +00:00
Yang Tse
32cc75d6cb
Partially cleanup debugging messages in test harness, introduced for
...
new minimum SSH version support for SCP, SFTP and SOCKS tests.
Some verbosity which still remains, will go out before next release.
2008-01-08 20:12:43 +00:00
Yang Tse
1c0a19ad53
Remove increased loglevel intended to debug autobuild's publickey
...
authentication failures when using OpenSSH 2.9.9 or SunSSH.
Verified fact: Even when only using publickey authentication,
OpenSSH and SunSSH first validate the user, this implies that
if the user validation fails, 'invalid user', the publickey
authentication will not be allowed to complete.
2008-01-08 19:18:25 +00:00
Yang Tse
34d02d1969
Increase loglevel to debug autobuild's publickey authentication
...
failures when using OpenSSH 2.9.9 or SunSSH
2008-01-08 00:40:02 +00:00
Yang Tse
2408b236ca
Display ssh server log and configuration upon socks server failure
2008-01-08 00:39:31 +00:00
Dan Fandrich
4acd437952
Fixed test description
2008-01-07 19:54:40 +00:00
Yang Tse
9c6533d287
Increase MaxAuthTries from 0 to 10. Using a value of 0 is too restrictive
2008-01-06 02:02:55 +00:00
Daniel Stenberg
3df484088f
added keyword
2008-01-05 12:15:41 +00:00
Dan Fandrich
fcb2595ed6
"yes" must be in quotes to be XML compatible
2008-01-04 23:57:39 +00:00
Daniel Stenberg
fe0d7aee49
Daniel Egger provided 'nonewline=yes' support for the <stdout> section
2008-01-04 23:31:04 +00:00
Yang Tse
a4945fe687
Missing newline at end of message
2008-01-04 19:56:56 +00:00
Yang Tse
88d89b2177
Fix 'format string' compiler warning
2008-01-04 15:39:06 +00:00
Yang Tse
61a2d5ea75
'ControlPath' ssh client configuration file option requires OpenSSH 4.2 or
...
later to accept 'none' as an indication to disable connection multiplexing
2008-01-04 14:12:10 +00:00
Yang Tse
c479c64333
SunSSH 1.1 ssh client does not support config file options:
...
ConnectTimeout
ForwardX11Trusted
HashKnownHosts
RekeyLimit
ServerAliveCountMax
ServerAliveInterval
2008-01-04 13:24:17 +00:00
Yang Tse
7a2177dc42
- Display curl_ssh_config when socks server fails to start.
...
- Capability of running socks5 tests must be based on ssh daemon version
and not on ssh client version.
2008-01-04 13:00:40 +00:00
Yang Tse
bf6e2f28ba
Make sure @INC is modified before 'using' the sshhelp module.
2008-01-04 03:05:33 +00:00
Yang Tse
f5da1e5484
'LocalCommand' no longer used for ssh client config file. When used it
...
requires a non blank argument.
2008-01-04 03:04:30 +00:00
Yang Tse
fd8d862c37
Modify test harness so that the minimum SSH version required to run
...
SCP, SFTP and SOCKS4 tests is now OpenSSH 2.9.9 or SunSSH 1.0
For SOCKS5 tests minimum versions are OpenSSH 3.7 or SunSSH 1.0
2008-01-03 20:48:22 +00:00
Daniel Stenberg
f277124a0f
In an attempt to repeat the problem in bug report #1850730
...
(http://curl.haxx.se/bug/view.cgi?id=1850730 ) I wrote up test case 552. The
test is doing a 70K POST with a read callback and an ioctl callback over a
proxy requiring Digest auth. The test case code is more or less identical to
the test recipe code provided by Spacen Jasset (who submitted the bug report).
2007-12-26 21:48:52 +00:00
Dan Fandrich
9cd30c2012
Use getcwd() to get the directory, which works even if one of the directory
...
components doesn't have read permission set.
2007-12-22 18:25:43 +00:00
Dan Fandrich
d639ed1aaf
Use getcwd() to get the directory, which works even if one of the
...
directory components doesn't have read permission set.
2007-12-20 21:21:43 +00:00
Daniel Stenberg
82c9379b6c
spell!
2007-12-15 22:19:08 +00:00
Daniel Stenberg
c1730dc50a
Add test 551 that tests callback-post over a proxy that requires Digest auth.
...
A failed attempt to repeat bug report #1850730 (ie the test works fine).
2007-12-15 22:13:07 +00:00
Dan Fandrich
26115aac5d
Added missing <features>
2007-12-14 01:09:45 +00:00
Dan Fandrich
ca6b27aed2
Fixed typo in test title
2007-12-14 01:05:30 +00:00
Daniel Stenberg
963ef5414c
add keywords
2007-12-08 22:56:17 +00:00
Daniel Stenberg
975812d246
add missing files
2007-12-08 22:56:05 +00:00
Daniel Stenberg
089668ec73
correct the comment about size
2007-12-08 22:53:49 +00:00
Daniel Stenberg
cc0ce38acc
add test 549 and 550
2007-12-08 22:53:28 +00:00
Daniel Stenberg
7d3ea12b62
Spacen Jasset reported a problem with doing POST (with data read with a
...
callback) over a proxy when NTLM is used as auth with the proxy. The bug
also concerned Digest and was limited to using callback only. Spacen worked
with us to provide a useful patch. I added the test case 547 and 548 to
verify two variations of POST over proxy with NTLM.
2007-12-05 21:20:14 +00:00
Daniel Stenberg
59dc9085d1
fix compiler warning
2007-12-05 11:10:24 +00:00
Daniel Stenberg
4e4f33a297
added test548 which uses the lib547 source file, preparing for test547 which
...
is supposed to repeat the bug report "NTLM proxy authentication with
CURLOPT_READDATA seems broken." posted on the curl-library mailing list on dec
3 2007.
2007-12-05 11:08:56 +00:00
Daniel Stenberg
1f058f1014
removed the ;type= thing for FTP urls through proxy, since that's now only
...
present when enabled by on option which isn't done by default (and isn't even
available for the curl app atm)
2007-12-03 09:50:32 +00:00
Yang Tse
cf806748ec
To allow remote log inspection avoid redirecting messages to stderr.
...
Cleanup some debugging messages. Unlink log file on exit.
2007-11-28 01:46:28 +00:00
Yang Tse
0c367fef94
ConnectTimeout requires OpenSSH 3.7 or later
2007-11-27 20:57:22 +00:00
Yang Tse
a418d290f1
Explicitly disallow remote hosts to connect to local forwarded ports,
...
the socks server port in the test suite. This is the default setting
unless a tinkered built ssh is being used.
2007-11-27 00:52:30 +00:00
Yang Tse
08cb30801c
Stop ssh and socks servers when verification fails
2007-11-26 14:26:40 +00:00
Yang Tse
788de4f7ba
Providing an explicit bind address besides the port for dynamic application-level
...
port forwarding, our socks port, prevents ssh from running on some systems.
By default, ssh binds local port forwardings to the loopback address, since this
was the address being given as the explicit bind address, now it isn't given.
2007-11-26 14:07:09 +00:00
Daniel Stenberg
05221e9056
test1015 --data-urlencode
2007-11-26 11:04:21 +00:00
Yang Tse
d59841618d
Temporary change to better debug startup failures
...
of test suite ssh and socks servers.
2007-11-26 02:45:24 +00:00
Yang Tse
8d3964782a
Allow different start timeout specification for each server
2007-11-25 03:55:53 +00:00
Yang Tse
5b809a3104
make 'checkdied' in runtests.pl more robust
2007-11-23 12:18:45 +00:00
Yang Tse
3daa54d636
Revert last change since it breaks running the test suite
...
when builddir is different from srcdir.
2007-11-23 09:50:44 +00:00
Yang Tse
8f1829d1d2
Improve chance of running runtests.pl from outside the
...
source tree 'tests' directory
2007-11-23 04:03:46 +00:00
Yang Tse
6efb6addf2
Debugging messages to trace startnew failures
2007-11-22 19:56:38 +00:00
Yang Tse
61e2e86aef
Temporary change adding additional debugging messages to better pinpoint
...
startup failures of test suite ssh and socks servers.
2007-11-21 19:33:09 +00:00
Yang Tse
9b86eecb94
Fix trying to return outside of a subroutine
2007-11-21 17:50:30 +00:00
Yang Tse
6dfb5b4e1f
Don't gather additional debug info unless sshd actually fails
2007-11-20 16:47:56 +00:00
Yang Tse
258c4686b2
Improve detection of sshd un/supported options.
...
Gather additional debug info when the test suite ssh server fails to start.
2007-11-20 14:10:09 +00:00
Yang Tse
5376d1047c
This is a temporary change to test if OpenSSH 3.6 and SunSSH 1.1
...
are good/compatible enough to run the test suite ssh server and
socks tests
2007-11-19 17:20:32 +00:00
Yang Tse
968e943eac
Temporary change to help debugging string(s) returned by sshd -V
...
when sshd is not being identified as an OpenSSH daemon
2007-11-19 01:49:28 +00:00
Yang Tse
536f98a766
Add /opt/ssh/sbin and /opt/ssh/libexec to the sshd locations search list.
...
Improve wording of a couple of debug messages.
2007-11-18 01:16:44 +00:00
Yang Tse
c4e5613a7d
When unable to start test suite sshserver, log if OpenSSH has not been
...
found or the OpenSSH version found
2007-11-17 17:43:33 +00:00
Yang Tse
2b15823dab
Add /usr/local/sbin and /usr/freeware/bin to the sshd locations search list
2007-11-17 02:28:54 +00:00
Daniel Stenberg
59dcc7e191
Michal Marek made the test suite remember what test servers that fail to
...
start so that subsequent tries are simply skipped.
2007-11-16 23:06:53 +00:00
Daniel Stenberg
44d408204a
Michal Marek fixed the test suite to better deal with the case when the HTTP
...
ipv6 server can't run.
2007-11-15 22:41:31 +00:00
Yang Tse
ed636cbe44
Replace isupper with our uppercase macro version
2007-11-15 13:20:18 +00:00
Yang Tse
c960cd41e8
Fix comment
2007-11-08 16:32:31 +00:00
Dan Fandrich
c8355c27e9
Sort the directory listing because the server doesn't always do it.
2007-11-05 20:54:35 +00:00
Dan Fandrich
c2d7e2ae17
Added some keywords
2007-11-05 20:53:15 +00:00
Dan Fandrich
2f3d520571
Ignore more features that curl-config is not expected to know about
2007-11-01 21:20:24 +00:00
Dan Fandrich
8be493296d
Make postcheck failure message more like the others
2007-11-01 17:42:39 +00:00
Dan Fandrich
6f33531861
Added test case 1014 to compare curl-config --features with curl --version
2007-11-01 03:09:27 +00:00
Dan Fandrich
16897354bc
Added test case 1013 to check that curl-config --protocols matches the
...
protocols listed in curl --version
2007-11-01 00:36:55 +00:00
Dan Fandrich
6790c559af
Detect curl source when valgrind provides an absolute source file name
2007-10-31 18:32:06 +00:00
Dan Fandrich
38cd2d781f
Added test case 546 to check that subsequent FTP transfers work after a
...
failed one using the multi interface
2007-10-29 22:57:31 +00:00
Dan Fandrich
15feb8217f
Fixed the 2000-series tests so that the downloaded data is actually checked
2007-10-27 01:04:36 +00:00
Dan Fandrich
59dccb34b0
Made the magic testnumber > 10000 support actually work
2007-10-27 01:02:57 +00:00
Dan Fandrich
e8057241c6
Fixed the test case to create only a single test file, which is all the
...
test harness supports.
2007-10-26 20:19:49 +00:00
Dan Fandrich
3f55ed0ef7
Check that all servers in the <server> section are supported, not just
...
the first.
2007-10-26 19:26:04 +00:00
Yang Tse
1d49c04545
Detect, log and avoid storing a request with a negative size.
2007-10-26 00:36:36 +00:00
Dan Fandrich
43885493ea
Disable valgrind for this test to avoid the rlimit = soft rlimit problem
...
found by Michal Marek.
2007-10-25 21:49:45 +00:00
Dan Fandrich
1eac702c1a
Added test case 2004.
...
Disable valgrind in test case 1004 due to a libtool bug.
2007-10-25 21:04:51 +00:00
Patrick Monnerat
0678a51d3b
Allow test server to handle binary POSTs.
...
Tests 35, 544 545 added: binary data POSTs.
2007-10-25 19:40:05 +00:00
Dan Fandrich
b7dd186d36
When valgrind is disabled in the test file, don't run it at all (as opposed
...
to running it and ignoring its output).
2007-10-25 19:39:52 +00:00
Yang Tse
26c1c8b2ad
Don't show valgrind log files of other tests
2007-10-25 18:07:13 +00:00
Daniel Stenberg
824aa5f918
Michal Marek fixed the test script to be able to use valgrind even when the
...
lib is built shared with libtool.
2007-10-25 14:30:51 +00:00
Daniel Stenberg
91e27ce755
Fixed a TFTP memory leak. Enabled test 2003 to verify this.
2007-10-25 07:47:38 +00:00
Dan Fandrich
65ed696625
Fixed the test TFTP server to support the >10000 test number notation
...
Added test cases 2002 and 2003 (the latter disabled for now)
2007-10-24 22:48:23 +00:00
Daniel Stenberg
3e3eaaada7
enable 2000 and 2001
2007-10-24 21:27:25 +00:00
Dan Fandrich
38649d1362
Added test cases 2000 and 2001 which test multiple protocols using the
...
same easy handle
Fixed the filecheck: make target to work outside the source tree
2007-10-24 19:40:07 +00:00
Dan Fandrich
4f00a02ba3
Fixed the test FTP server to support the >10000 test number notation
2007-10-24 19:39:29 +00:00
Patrick Monnerat
c67c54d4b3
Close log/server.input ASAP to avoid lengthy file lock on cygwin
2007-10-24 13:03:08 +00:00
Yang Tse
8e7da9464a
Read callback should return 0 when no more data left
2007-10-23 15:10:48 +00:00
Yang Tse
92433e596b
We use this ZERO_NULL to avoid picky compiler warnings,
...
when assigning a NULL pointer to a function pointer var.
2007-10-17 16:58:32 +00:00
Dan Fandrich
2741f97a69
Fixed a couple of typos that messed up the tests.
2007-10-12 02:09:45 +00:00
Dan Fandrich
d7fbe07ee2
Added some <keywords> sections and use some key words more consistently.
2007-10-12 01:44:22 +00:00
Dan Fandrich
2fce1f3e97
Fixed the -l option of runtests.pl
...
Added support for skipping tests based on key words.
2007-10-11 21:15:09 +00:00
Yang Tse
54bcde0a14
also log error message string
2007-10-09 23:24:28 +00:00
Yang Tse
660c86ce95
logmsg already appends '\n'
2007-10-09 23:21:29 +00:00
Daniel Stenberg
6dd6b4d1fa
I enabled test 1009 and made the --local-port use a wide range to reduce the
...
risk of failures.
2007-10-04 21:26:26 +00:00
Daniel Stenberg
67d94514b0
Kim Rinnewitz reported that --local-port didn't work with TFTP transfers.
...
This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
2007-10-04 10:01:41 +00:00
Yang Tse
06be8bc389
On error, close "log/server.response"
2007-10-04 02:09:33 +00:00
Yang Tse
0ac5fd354b
If TCP_NODELAY is not defined we can't disable the Nagle algorithm
2007-10-03 23:38:07 +00:00
Yang Tse
059707be32
Renamed a couple of global variables to avoid shadowing warnings
2007-10-02 16:05:28 +00:00
Daniel Stenberg
119364741e
known bug #46 : chunked-encoded CONNECT responses from a http proxy now works.
...
Added test case 1008 to verify. Note that #47 is still there.
2007-10-02 10:21:36 +00:00
Daniel Stenberg
8d1239c091
Disable the Nagle algorithm and send back responses in small chunks in an
...
attempt to force smaller bits to get read by clients.
2007-10-02 10:13:37 +00:00
Daniel Stenberg
9ca2644429
Added test536 that was accidentally missing. I also wrote up a new makefile
...
target called 'filecheck' so that if you run 'make filecheck' in this directory
it'll check if the local files are also mentioned in the Makefile.am so that
they are properly included in release archives!
2007-09-30 22:58:24 +00:00
Daniel Stenberg
ec08e2f9f2
Alex Fishman reported a curl_easy_escape() problem that was made the
...
function do wrong on all input bytes that are >= 0x80 (decimal 128) due to a
signed / unsigned mistake in the code. I fixed it and added test case 543 to
verify.
2007-09-30 22:40:24 +00:00
Yang Tse
b108c664ac
Fix missing right parenthesis
2007-09-30 01:27:39 +00:00
Yang Tse
64db60397b
Fix comparison between signed and unsigned
2007-09-30 01:01:43 +00:00
Dan Fandrich
9fc8800b6d
Removed cut-and-paste cruft leading to fclose() of an unopened file
2007-09-27 17:22:10 +00:00
Dan Fandrich
16b95fc773
Enabled a few more gcc warnings with --enable-debug. Renamed a few
...
variables to avoid shadowing global declarations.
2007-09-27 01:45:22 +00:00
Daniel Stenberg
fd4cf78f36
Philip Langdale provided the new CURLOPT_POST301 option for
...
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
2007-09-26 12:44:59 +00:00
Daniel Stenberg
a6315359d7
Max Katsev reported that when doing a libcurl FTP request with
...
CURLOPT_NOBODY enabled but not CURLOPT_HEADER, libcurl wouldn't do TYPE
before it does SIZE which makes it less useful. I walked over the code and
made it do this properly, and added test case 542 to verify it.
2007-09-26 12:00:01 +00:00
Daniel Stenberg
775f86cb5a
Immanuel Gregoire fixed KNOWN_BUGS #44 : --ftp-method nocwd did not handle
...
URLs ending with a slash properly (it should list the contents of that
directory). Test case 351 brought back and also test 1010 was added.
2007-09-24 21:47:35 +00:00
Dan Fandrich
4686adb433
Added variable substitution to the <verify><file> section.
...
Made a few more tests work remotely.
2007-09-20 20:39:17 +00:00
Dan Fandrich
0159636373
Use double quotes in command lines for consistency.
2007-09-18 20:41:20 +00:00
Dan Fandrich
4f067b1d1c
IPv6 is a required feature for these two tests, even if it's not obvious.
2007-09-18 17:41:04 +00:00
Dan Fandrich
ae60745e3e
Fixed the required server entry
2007-09-17 23:23:13 +00:00
Dan Fandrich
7f496d8c3f
Changed some FTP tests to validate the format of the PORT and EPRT commands
...
sent by curl, if not the addresses themselves.
2007-09-17 21:44:57 +00:00
Dan Fandrich
048c74f2fa
Added %CLIENTIP and %CLIENT6IP data file substitution variables.
...
Added hooks to the test suite to make it possible to test a curl running
on a remote host.
2007-09-17 21:42:01 +00:00
Dan Fandrich
0ed57d370d
Allow setting the IP address on which to listen for connections.
2007-09-17 21:39:34 +00:00
Dan Fandrich
9b11a84e74
Make the ftp server connect to the address given by curl in the PORT/EPRT
...
instead of hard-coding it to 127.0.0.1
2007-09-17 18:12:11 +00:00
Dan Fandrich
26f8de459a
Made the directory postprocessor more forgiving of input directory format
2007-09-17 17:22:46 +00:00
Daniel Stenberg
e04151ed76
Michal Marek made libcurl automatically append ";type=<a|i>" when using HTTP
...
proxies for FTP urls.
2007-09-15 21:14:12 +00:00
Dan Fandrich
05e4a3026d
Replaced 127.0.0.1 with %HOSTIP where possible
2007-09-14 19:32:31 +00:00
Daniel Stenberg
9e241864e3
Extracting the CURLINFO_PRIVATE pointer makes no point since nothing set
...
it. This caused a segfault in some fprintf() implementations. Like on Solaris.
2007-09-12 10:46:14 +00:00
Daniel Stenberg
9e88343a17
Daniel S (12 September 2007)
...
- Bug report #1792649 (http://curl.haxx.se/bug/view.cgi?id=1792649 ) pointed
out a problem with doing an empty upload over FTP on a re-used connection.
I added test case 541 to reproduce it and to verify the fix.
- I noticed while writing test 541 that the FTP code wrongly did a CWD on the
second transfer as it didn't store and remember the "" path from the
previous transfer so it would instead CWD to the entry path as stored. This
worked, but did a superfluous command. Thus, test case 541 now also verifies
this fix.
2007-09-11 22:23:57 +00:00
Dan Fandrich
d030dfa6e2
Added test case 1007 to test permission problem when uploading with TFTP
...
(to validate bug #1790403 ).
2007-09-07 20:05:20 +00:00
Dan Fandrich
6fd1cfeab1
Minor updates
2007-09-05 17:17:59 +00:00
Dan Fandrich
f6251734fc
Added more accurate error code returns from SFTP operations. Added test
...
case 615 to test an SFTP upload failure.
2007-08-30 23:03:59 +00:00
Dan Fandrich
9f44a95522
Renamed several libcurl error codes and options to make them more general
...
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
2007-08-30 20:34:57 +00:00
Dan Fandrich
5d4c981e13
Fixed a few compiler warnings. Try to do a slightly better job of
...
cleaning up after an OOM condition in curl_multi_add_handle
2007-08-30 18:26:19 +00:00
Dan Fandrich
5cb2ee878c
Mention that 'make test' does more than just run all the tests (suggested
...
by Kris/tinker105 in bug #1779054 ) and mention the torture tests.
2007-08-28 18:23:19 +00:00
Daniel Stenberg
7cba40b218
Bug report #1779054 ( http://curl.haxx.se/bug/view.cgi?id=1779054 ) pointed
...
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
2007-08-24 14:00:42 +00:00
Dan Fandrich
975fafdc49
Added test case 1005 to test excessively-long replies spread out over
...
multiple lines (similar to test case 1003).
2007-08-23 23:25:47 +00:00
Dan Fandrich
9537580ba2
Allow ftp server alternate replies to contain backslash-escaped control
...
characters.
2007-08-23 23:24:39 +00:00
Dan Fandrich
7ffae92daf
Need even more time to wait for an accept.
2007-08-23 18:45:28 +00:00
Dan Fandrich
abca03cf36
Added test1004 to validate a previous fix for a memory leak when an
...
empty proxy server is selected.
2007-08-23 17:35:00 +00:00
Daniel Stenberg
381e372939
Bug report #1779054 ( http://curl.haxx.se/bug/view.cgi?id=1779054 ) pointed
...
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
2007-08-22 14:18:06 +00:00
Daniel Stenberg
c347db2e0a
added a size > buffer size check to make it easier to track this in the
...
future
2007-08-22 14:09:13 +00:00
Daniel Stenberg
232a4553b8
Upped the buffer size to 17000+ bytes to prepare for the upcoming test 1003
...
that verfies ridiculously long server response lines. Also changed sprintf
to snprintf in a few places.
2007-08-22 13:57:49 +00:00
Dan Fandrich
1a8d8aa227
Increase timeout for accept for improved reliability on loaded servers.
2007-08-20 17:53:38 +00:00
Daniel Stenberg
014fe6971e
remove stupid comment since there's no content in this test case
2007-08-17 22:24:51 +00:00
Daniel Stenberg
3217809294
Robson Braga Araujo filed bug report #1776235
...
(http://curl.haxx.se/bug/view.cgi?id=1776235 ) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
2007-08-17 22:22:43 +00:00
Daniel Stenberg
dcf698dc74
some keywords for future stats/coverage checks
2007-08-17 22:17:23 +00:00
Daniel Stenberg
54117be639
Moved the 5320 and 5322 into the 1000-series instead which is a documented
...
range. They are about FTP but the 100-199 range is full.
2007-08-17 22:11:25 +00:00
Daniel Stenberg
5a79532aee
Song Ma provided a patch that cures a problem libcurl has when doing resume
...
HTTP PUT using Digest authentication. Test case 5320 and 5322 were also
added to verify the functionality.
2007-08-17 20:21:32 +00:00
Dan Fandrich
652e2cf57c
Removed redundant dependency lines
2007-08-13 18:11:37 +00:00
Dan Fandrich
c7a66d5af4
There's no need to ignore the User-Agent for this test.
2007-08-09 03:28:16 +00:00
Dan Fandrich
2e60ca382d
Fixed some icc compiler warnings.
2007-08-07 00:10:27 +00:00
Daniel Stenberg
6f750f3b57
Dmitriy Sergeyev reported a regression: resumed file:// transfers broke
...
after 7.16.2. This is much due to the different treatment file:// gets
internally, but now I added test 231 to make it less likely to happen again
without us noticing!
2007-08-02 14:09:08 +00:00
Dan Fandrich
5ecd56d964
Implemented only the parts of Patrick Monnerat's OS/400 patch that renamed
...
some few internal identifiers to avoid conflicts, which could be useful on
other platforms.
2007-07-23 18:51:22 +00:00
Dan Fandrich
cc44fb1dc8
Log the "<CMD> wasn't handled" error normally since it is now expected
...
to occur in a couple of tests.
2007-07-23 17:51:43 +00:00
Daniel Stenberg
4bbcc47f3f
Added test case 354 that makes a simple FTP retrieval without password, which
...
verifies the bug fix in #1757328 .
2007-07-22 10:08:59 +00:00
Daniel Stenberg
8ab495a088
test and verify curl -I on a single FTP file somewhat more than before
2007-07-21 21:49:23 +00:00
Daniel Stenberg
84e7bb85b1
To allow more flexibility in FTP test cases, I've removed the enforced states
...
from the test server code as they served no real purpose. The test server is
here to serve for the test cases, not to attempt to function as a real server!
2007-07-21 21:48:58 +00:00
Dan Fandrich
c7db74fe73
Revert the 512 change since newer versions of OpenSSH don't support DSA
...
keys that small.
2007-07-19 01:42:22 +00:00
Dan Fandrich
89d119646d
Use 512 bit keys to reduce the time taken to generate them. This shouldn't
...
really reduce security since in the common case of a daily automated build
the keys are only used for a single test run lasting a few minutes before
being deleted.
2007-07-18 00:27:13 +00:00
Dan Fandrich
989dd9c34a
Fixed test cases 613 and 614 by improving the log postprocessor to handle
...
a new directory listing format that newer libssh2's can provide. This
is probably NOT sufficient to handle all directory listing formats that
server's can provide and should be revisited.
2007-07-17 21:53:38 +00:00
Daniel Stenberg
98b9349be7
make it do all three requests on the same connection
2007-07-16 21:44:46 +00:00
Daniel Stenberg
1da3d402f6
convert test case 540 to use a custom Host: header as well
2007-07-15 21:00:26 +00:00
Daniel Stenberg
1da3192d2d
let's just export the whole argc + argv pair globally so that each test tool
...
can take advantage of it however they see fit!
2007-07-15 20:59:43 +00:00
Daniel Stenberg
15c8219340
Added test case 540 and lib540.c, the 'proxyauth.c' test app posted by Shmulik
...
Regev on the libcurl mailing list on 10 Jul 2007, converted to a test case.
2007-07-14 22:39:22 +00:00
Daniel Stenberg
5ae21ebde9
add support for arg3 as the third argument...
2007-07-14 22:38:18 +00:00
Daniel Stenberg
c7e0d8c30b
add some better logging when HTTP server start fails, and make the failure
...
really hard if the test server can't be resolved (like for ::1 ipv6)
2007-07-14 22:33:46 +00:00
Daniel Stenberg
a53ba060c8
start the retry delay at 10 ms, double it for every failed attempt which makes
...
it 10 seconds delay after 11 attempts
2007-07-12 17:03:45 +00:00
Gunter Knauf
72bb5854f7
the timeout was probably too short with max = 1 sec, so lets test with 5 sec.
2007-07-12 10:54:15 +00:00
Gunter Knauf
0878b14f79
added time loop to sockfilt.c in order to wait for SO_REUSEADDR;
...
added go_sleep() to util.c.
2007-07-12 01:07:49 +00:00
Dan Fandrich
814b471d55
Added a code coverage section using gcc and gcov.
2007-07-10 22:55:51 +00:00
Dan Fandrich
19631f5d5f
Force the time zone to GMT in the cookie tests in case the user is
...
using one of the so-called 'right' time zones that take into account
leap seconds, which causes the tests to fail (as reported by
Daniel Black in bug report #1745964 ).
2007-07-10 22:27:16 +00:00
James Housley
a8d6b40736
The previous commits changed the error code
2007-07-10 22:26:59 +00:00
Dan Fandrich
93bd512357
Fixed a curl memory leak reported by Song Ma with a modified version
...
of the patch he suggested. Added his test case as test289 to verify.
2007-07-10 22:23:16 +00:00
Dan Fandrich
598bc3968e
Add -a when running torture tests now that it's supported.
2007-07-05 01:38:00 +00:00
Gunter Knauf
c8a47bf662
revert previous patch since it turned out that older cp dont know this switch, argh!
2007-06-28 22:31:18 +00:00
James Housley
aed0cc6f2a
Using fdopen() is a more correct way to implement the CURLOPT_NEW_FILE_PREMS
...
file.c, but the debug interface was missing. This adds the routines needed
to make the memory debuging work for fdopen().
2007-06-28 11:11:29 +00:00
Gunter Knauf
5df5a2aa54
fixed nasty cp warnings about not beeing able to preserve ownership.
2007-06-28 01:20:30 +00:00
Daniel Stenberg
974fa1242a
Adjusted how libcurl treats HTTP 1.1 responses without content-lenth or
...
chunked encoding (that also lacks "Connection: close"). It now simply
assumes that the connection WILL be closed to signal the end, as that is how
RFC2616 section 4.4 point #5 says we should behave.
2007-06-25 13:58:14 +00:00
Daniel Stenberg
a1b650ad7b
Gerrit Bruchhäuser pointed out a warning that the Intel(R) Thread Checker
...
tool reports and it was indeed a legitimate one and it is one fixed. It was
a use of a share without doing the proper locking first.
2007-06-21 14:23:38 +00:00
Daniel Stenberg
fc3c5dae87
and fix another flaw in the singlecwd case when we get ftp://site.com/, also
...
from the #1739100 bug report
2007-06-19 12:33:28 +00:00
Daniel Stenberg
cc26cc5dcd
Test listing of root dir with the three ftp-methods. KNOWN_BUGS #44 make me
...
disable test 351 by default by I add the test case anyway to make it easier
to work on this problem in the future.
2007-06-18 21:04:05 +00:00
Daniel Stenberg
b0aa11fde7
Tom Regner added /usr/lib/misc to the path to scan for sftp to make the
...
sftp tests run fine on gentoo
2007-06-14 21:16:08 +00:00
Dan Fandrich
c45d44fee9
Wait longer for servers to start up since the ssh server needs to generate
...
keys the first time (which can take a while on a slow or loaded host).
Enforce a longer startup wait time for the ssh client SOCKS server, too.
Check for an error code from startnew() when starting any server.
2007-06-11 17:53:10 +00:00
Dan Fandrich
1e718a515a
We do not use RSA keys in the test suite.
2007-06-11 17:49:25 +00:00
Dan Fandrich
477e27f99d
Fixed the test harness so that it actually kills the ssh being used as
...
the SOCKS server.
2007-06-08 18:56:05 +00:00
Dan Fandrich
6a84d492f1
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:32:24 +00:00
Dan Fandrich
873d95a34c
Incorporated Daniel Black's test706 and test707 SOCKS test cases.
2007-06-08 17:21:40 +00:00
Dan Fandrich
1500e95839
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:03:50 +00:00
Dan Fandrich
ad80490711
Changed the opens to work on older versions of perl.
...
Redirect ssh output to ssh.log
2007-06-07 22:42:26 +00:00
Dan Fandrich
073a6cea45
Renamed the sshd log file to sshd.log.
...
Added more options to the ssh config file to improve the consistency of
the test environment.
Force a rewrite of the ssh config files on every invocation.
Changed the opens to work on older versions of perl.
2007-06-07 21:42:33 +00:00
Dan Fandrich
345ffd1163
Cleaned up SOCKS tests. Use a magic port number instead of killserver
...
to do nonlistening server tests, like other tests.
2007-06-07 20:14:00 +00:00
Dan Fandrich
f0ffb35d55
Fixed some problems in starting SSH for use in SOCKS.
2007-06-07 19:49:09 +00:00
Daniel Stenberg
e86dfd9688
added 703: a socks5 version of 702
2007-06-05 13:52:34 +00:00
Daniel Stenberg
a466b31574
Daniel Black's test suite fixes and initial test cases for SOCKS4/5 using
...
openssh
2007-06-05 13:50:59 +00:00
Yang Tse
9583b51d80
In case of test failure, try not to show log files of other tests
2007-05-30 17:15:05 +00:00
Dan Fandrich
09fd3b4935
Match file times occurring in the morning.
2007-05-16 17:45:53 +00:00
Dan Fandrich
ea43bb013b
Added support for quote commands before a transfer using SFTP and test
...
case 614.
Allow SFTP quote commands chmod, chown, chgrp to set a value of 0.
2007-05-15 00:28:50 +00:00
Dan Fandrich
b0a4c992e7
Added SFTP directory listing test case 613.
2007-05-14 22:03:42 +00:00
Dan Fandrich
85707460e5
Added FTPS upload tests 408 and 409.
2007-05-10 20:03:20 +00:00
Dan Fandrich
ed998270aa
Added FTPS test cases 406 and 407
2007-05-08 22:14:30 +00:00
Dan Fandrich
6c8e6549d0
Check the return code from curl_multi_add_handle()
2007-05-02 06:02:13 +00:00
Dan Fandrich
5187faeeb9
Improved the test harness to allow running test servers on other than
...
the default port numbers, allowing more than one test suite to run
simultaneously on the same host.
2007-04-30 20:15:33 +00:00
Dan Fandrich
1228ec9fbb
Fixed some tests to stop hard-coding the port number.
2007-04-30 19:05:48 +00:00
Dan Fandrich
f213d0db98
Added support in runtests.pl for "!n" test numbers to disable individual tests.
2007-04-25 23:18:52 +00:00
Dan Fandrich
9bdb05b4d6
When displaying log files, truncate the really longs ones such as you
...
would get from a torture test.
2007-04-25 20:09:32 +00:00
Dan Fandrich
61d7e720a5
Treat log files and -k the same when running torture tests as when not.
2007-04-24 23:28:57 +00:00
Dan Fandrich
17507eac85
Clear out FTP server options before each new client.
...
Wait for child processes to die to avoid creating zombies.
2007-04-24 21:30:39 +00:00
Dan Fandrich
6a35841b2e
Added tests 610-612 to test more SFTP post-quote commands.
2007-04-23 23:00:38 +00:00
Dan Fandrich
28dde78dde
Added <postcheck> support to the test harness.
2007-04-23 22:58:45 +00:00
Dan Fandrich
37171809f6
Mention NSS, <postcmd> commands
2007-04-23 21:18:30 +00:00
Dan Fandrich
3398eca7c3
Changed another nonexistent host name to be under the haxx.se domain
...
to guarantee against it ever being valid.
2007-04-23 01:51:02 +00:00
Dan Fandrich
043070f90e
Changed an error message slightly so it can be caught easier by the
...
autobuild logs scanner.
2007-04-20 17:16:32 +00:00
Dan Fandrich
ae3d5949b8
Various test file cleanups, including using <servercmd> instead of writing
...
directly to ftpserver.cmd and removing unneeded empty sections.
2007-04-18 20:22:01 +00:00
Dan Fandrich
66fc5498d2
Added test cases 296, 297 and 298 to test --ftp-method handling
2007-04-18 06:30:28 +00:00
Daniel Stenberg
e3dab1bea2
jayjwa added the "DH PARAMETERS" to make this work with recent stunnels
2007-04-14 20:29:09 +00:00
Dan Fandrich
71a0d50f48
Added test cases 294 and 295 to test --ftp-account handling
2007-04-13 20:59:15 +00:00
Yang Tse
8d2a0fe85b
Fix test case 534 which started to fail 2007-04-13 due to the existance
...
of a new host on the net with the same silly domain the test was using
for a host which was supposed not to exist.
2007-04-13 11:35:19 +00:00
Dan Fandrich
35935d71d2
Honour the -a option when -t is enabled.
2007-04-10 00:37:56 +00:00
Dan Fandrich
de17f4436e
Changed error return codes to match update code.
2007-04-09 18:24:56 +00:00
Yang Tse
248a5381d4
In case of test failure, try not to show log files of other tests
2007-04-06 04:24:13 +00:00
Dan Fandrich
c1ab3e2d59
Enabled the ssh tests 600-609.
2007-04-05 19:28:33 +00:00
Yang Tse
a0a79ce853
unify fopen() failure error message among tests, allowing
...
the testsuite to count them as errors of the same kind
2007-04-05 11:05:36 +00:00
Yang Tse
70f9a13ecb
Further improve displaying of individual logfiles
2007-04-05 00:14:27 +00:00
Yang Tse
5625e5d5b8
add debug message and expand comment
2007-04-04 08:58:36 +00:00
Yang Tse
8a529bd987
test can be allowed to run if fopen() is capable of fopen()ing
...
three additional files once that we have already open()ed the
big bunch of file descriptors.
2007-04-04 06:39:03 +00:00
Yang Tse
a1f72943e9
cleanup
2007-04-04 05:04:47 +00:00
Dan Fandrich
0969a96732
Whoops--didn't mean to enable the ssh tests quite yet.
2007-04-04 04:57:40 +00:00
Yang Tse
ec8019b2a8
test can be allowed to run if fopen() is capable of fopen()ing
...
SAFETY_MARGIN additional files once that we have already open()ed
the big bunch of file descriptors.
2007-04-04 03:19:59 +00:00
Dan Fandrich
27d2d78059
Added more SSH tests (left disabled for now).
2007-04-04 00:48:37 +00:00
Yang Tse
584f3639e3
update copyright year
2007-04-03 18:25:18 +00:00
Yang Tse
2886ce96b0
Verify if the test is limited by an ancient stdio with a 256
...
open file limit. In this case the test is skipped with a
message showing this limitation when the number of open files
needed for the test is greater than 256.
2007-04-03 18:02:02 +00:00
Yang Tse
3344142b87
fix enumeration of disabled tests when they have the highest number
2007-04-03 15:59:52 +00:00
Yang Tse
70550a0572
Improve displaying of logfiles making sure all lines end with \n
...
and avoid using ! as last char of line.
2007-04-03 12:27:03 +00:00
Yang Tse
7bbad0b534
try not to link with unneeded libs, avoiding global LDADD
2007-04-03 02:57:54 +00:00
Yang Tse
161be66c89
when detecting un/supported sshd options use curl's sshd config file.
2007-04-03 02:36:55 +00:00
Dan Fandrich
4095c9de37
Eliminate the sshd option checking dependency on wc and make it faster.
2007-04-03 00:06:39 +00:00
Yang Tse
b8c12fe658
fix error in previous commit
2007-04-02 04:14:59 +00:00
Yang Tse
bdbaedc452
verify ssh daemon version
2007-04-02 01:21:57 +00:00
Gunter Knauf
0839621f47
print update message only if we really update CVS.
2007-04-01 13:59:50 +00:00
Dan Fandrich
ef10eaeb29
Added scp and sftp nonexistent file retrieval tests, but leave them
...
disabled for now.
2007-04-01 06:28:12 +00:00
Dan Fandrich
f8d78d57a7
Disable the SSH tests until the libssh2 bugs that causes test hangs
...
are sorted out.
2007-03-31 20:00:40 +00:00
Yang Tse
fdc1b61507
sshd might fail to start if given an unsupported configuration option.
...
Try to avoid this problem checking for some possible unsupported options,
and avoid using them in the configuration file.
2007-03-31 03:21:08 +00:00
Dan Fandrich
7fd154f094
Fixed some typos in the comments.
2007-03-30 22:07:48 +00:00
Dan Fandrich
a209c32bf3
Resurrected old FTPS error tests 402 and 403 as 404 and 405.
2007-03-30 22:04:14 +00:00
Dan Fandrich
40981286ea
Added HTTP --max-filesize tests and FTPS CCC failure test.
2007-03-30 18:50:55 +00:00
Yang Tse
f55a1c3a6c
Searching for sshd and sftp-server will be done first
...
in the PATH and afterwards in other common locations.
2007-03-30 10:11:49 +00:00
Yang Tse
c5586a65c2
ignore more generated files
2007-03-30 02:59:39 +00:00
Dan Fandrich
ffb11ad5c6
Don't tear down the ftp connection if the maximum filesize was exceeded
...
and added tests 290 and 291 to check.
2007-03-30 01:13:47 +00:00
Dan Fandrich
fbb1e49215
Added FTP-SSL failure test 402
2007-03-30 00:08:41 +00:00
Dan Fandrich
c26320d94f
Added ftps upload test 401
2007-03-29 22:50:23 +00:00
Dan Fandrich
c563a53c16
Eliminated extra / in scp/sftp URLs.
2007-03-29 19:19:06 +00:00
Dan Fandrich
e37a49086e
Add another option to tighten the test environment.
2007-03-29 18:46:09 +00:00
Dan Fandrich
f776c1d2eb
Abort if attempting to run as root.
2007-03-29 05:25:11 +00:00
Dan Fandrich
31b1e988f4
Only show exit status in verbose mode.
2007-03-28 04:36:09 +00:00
Dan Fandrich
884171aecf
Don't launch sshd as a daemon so its output can be logged.
2007-03-28 04:05:55 +00:00
Dan Fandrich
282127fbff
Tighten up a few more OpenSSH options
2007-03-27 04:01:39 +00:00
Dan Fandrich
2166645ce4
Added SFTP and SCP upload tests in test602 & test603
2007-03-26 19:23:00 +00:00
Dan Fandrich
844f5b6b45
Added test600 and test601, SFTP and SCP file retrieval tests.
2007-03-26 18:04:05 +00:00
Gunter Knauf
424063235b
catch up new lib extension when build with gcc/nlmconv.
2007-03-26 17:18:36 +00:00
Dan Fandrich
3b355421ec
Added sshserver.pl
2007-03-24 06:29:58 +00:00
Dan Fandrich
0dd1219668
Fixed a memory leak when specifying a proxy with a file: URL and added
...
test case 288 to verify it.
2007-03-24 02:15:20 +00:00
Dan Fandrich
b7131009fb
Changed the test harness to attempt to gracefully shut down servers
...
before resorting to the kill -9 hammer.
Added test harness infrastructure to support scp/sftp tests, using
OpenSSH as the server.
2007-03-24 01:01:28 +00:00
Daniel Stenberg
0c817b6614
language fix
2007-03-18 23:16:36 +00:00
Daniel Stenberg
ff314d7600
detect and show if built with yassl, but also set the "openssl" flag internally
...
since that is the API yassl attempts to provide
2007-03-18 22:37:23 +00:00
Daniel Stenberg
c1f3edbdd1
openssl/bio.h doesn't exist when we build with yassl so avoid trying
2007-03-16 22:44:46 +00:00
Dan Fandrich
a20a6f67c5
Fixed the test case to use a truly invalid urlglob range.
2007-03-16 04:34:53 +00:00
Dan Fandrich
ae07fd2ba8
libcurl supplies its own crypto hash functions when SSL is disabled, so
...
'crypto' tests aren't dependent on SSL. Compiling with
--disable-crypto-auth will cause test failures, however.
2007-03-12 20:50:16 +00:00
Yang Tse
40087ce7c0
change max allowed time for this test to complete to 90 seconds
2007-03-10 00:19:05 +00:00
Dan Fandrich
e12d46ac50
Updated the test harness to add a new "crypto" feature check and updated the
...
appropriate test case to use it. For now, this is treated the same as the
"SSL" feature because curl doesn't list it separately.
2007-03-09 23:39:42 +00:00
Dan Fandrich
1962ebf8e7
Updated the test harness to check for protocol support before running each
...
test, fixing KNOWN_BUGS #11 . Fixed some tests to more accurately specify
their required servers and features.
2007-03-09 21:01:39 +00:00
Dan Fandrich
7c144d5a7e
Made a few cleanups.
2007-03-08 20:00:28 +00:00
Dan Fandrich
0f0540d00b
Added SSL as a required feature for test case 400.
2007-03-08 19:50:32 +00:00
Dan Fandrich
1bfa7dfe39
Added test infrastructure to support basic FTPS tests. This currently
...
supports only ftps:// URLs with --ftp-ssl-control specified, which
implicitly encrypts the control channel but not the data channels. That
allows stunnel to be used with an unmodified ftp server in exactly the
same way that the test https server is set up.
Added test case 400 as a basic FTPS test.
2007-03-08 02:38:49 +00:00
Yang Tse
e5f8e5e57a
stricter newline policy
2007-03-03 05:16:57 +00:00
Yang Tse
53a3abc76b
30 seconds isn't long enough for this test on a loaded server.
2007-03-03 04:27:19 +00:00
Yang Tse
bfd6474f6b
stricter newline policy
2007-03-03 02:06:44 +00:00
Yang Tse
cef5b14baa
Reduce the posibility of leaving the sockfilter hanging around when
...
tearing down the test ftp server due to a read error condition.
2007-03-01 16:42:02 +00:00
Yang Tse
e817eb6cec
log a 1120 chars long string to aid in quoted-printable and soft
...
line break detection in daily build logs.
2007-02-27 23:46:48 +00:00
Dan Fandrich
fe0afb211e
5 seconds isn't always enough time to start a server on a loaded system.
2007-02-22 18:35:57 +00:00
Yang Tse
141b3d0c2f
remove redundant check in timestamp detection
2007-02-22 17:34:02 +00:00
Yang Tse
69565afab0
Check for stdbool.h at configuration stage, and include it if available.
...
Check for lowercase 'bool' type at configuration stage. If not available
provide a suitable replacement with a type definition of 'unsigned char'
in setup_once.h
Move definitions of TRUE and FALSE to setup_once.h
2007-02-22 02:51:54 +00:00
Daniel Stenberg
f19d333ef6
- Ravi Pratap provided work on libcurl making pipelining more robust and
...
fixing some bugs:
o Don't mix GET and POST requests in a pipeline
o Fix the order in which requests are dispatched from the pipeline
o Fixed several curl bugs with pipelining when the server is returning
chunked encoding:
* Added states to chunked parsing for final CRLF
* Rewind buffer after parsing chunk with data remaining
* Moved chunked header initializing to a spot just before receiving
headers
2007-02-21 21:59:40 +00:00
Yang Tse
29bb6f65f1
Move header file inclusion logic and definition of timeval
...
struct for platforms that don't have it to setup_once.h
2007-02-20 12:12:27 +00:00
Yang Tse
37f07a54bd
Several corrections & changes to what has been stated in revision 1.45
...
1) The maketgz script does not insert the timestamp in curlver.h,
it actually updates it. For CVS versions it is the "CVS" string.
2) testcurl.pl will always print the "date" string which represents
the moment the test build is run.
3) testcurl.pl may not print the "timestamp" string since the script
may end before it is printed out. (i.e. unable to update from CVS)
4) The "timestamp" string printed will be the same as the "date" one
unless one of the following conditions is met.
*) It is a tarball-based build. Timestamp will be creation time.
*) CVS update has been done. Timestamp will be end of CVS update.
2007-02-20 05:28:41 +00:00
Yang Tse
da8c666e4f
add tutil_tvdiff_secs() for completeness
2007-02-20 01:09:38 +00:00
Yang Tse
78a1e5d1a6
fix typo
2007-02-19 19:46:07 +00:00
Yang Tse
116f60e063
Show libcurl's timestamp. This timestamp is only available in curlver.h
...
for tarball-based tests and builds, the maketgz script inserts it when
the tarball is created. For CVS-based tests and builds the timestamp we
show is the current UTC build time as it is the CVS version timestamp.
In this way, all builds will have a valid source code timestamp which
isn't related to the moment the tests and build is performed, with the
exception of CVS-based ones which have the same "date" and "timestamp"
2007-02-19 19:41:48 +00:00
Yang Tse
75fca27f8e
log a message, stating the need of openssl to run this test
2007-02-19 04:51:47 +00:00
Yang Tse
f2cd2882a0
Oops missing var
2007-02-19 03:59:41 +00:00
Yang Tse
31e598d2f3
add debug messages for initialization failures
2007-02-19 02:03:58 +00:00
Yang Tse
d9bf55570b
Move portable error number symbolic name definitions to setup_once.h
2007-02-17 13:51:24 +00:00
Yang Tse
789fd0b74a
Replicate the configure tests that determined that timeval was available.
2007-02-17 11:43:52 +00:00
Dan Fandrich
3f140a6008
getpart implicitly drags in some networking functions, so it needs to be
...
linked to the networking libraries.
2007-02-17 08:16:53 +00:00
Dan Fandrich
a0a47f2767
Better separate the library dependencies into those required by libcurl
...
and those required by other components to avoid forcing unneeded
dependencies into the target objects.
2007-02-17 01:29:01 +00:00
Dan Fandrich
213017e9cf
Remove C99isms
2007-02-17 01:25:32 +00:00
Yang Tse
d46cab4a94
add debug messages for fopen() failures
2007-02-16 19:41:25 +00:00
Yang Tse
4dc453c087
add debug messages for fopen() failures
2007-02-16 19:17:05 +00:00
Yang Tse
a1d5983991
use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling
2007-02-16 18:19:35 +00:00
Yang Tse
4894ce16fc
use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling
2007-02-16 16:01:19 +00:00
Yang Tse
5a267c4312
compiler warning fix
2007-02-14 13:46:08 +00:00
Yang Tse
7033a1c072
enhance HTTP server request input writing,
...
retrying upon EINTR errors.
2007-02-14 00:28:01 +00:00
Daniel Stenberg
4efa0d9f68
ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on
...
the left side of @ to make it short(er).
2007-02-13 22:50:16 +00:00
Daniel Stenberg
7f70dbcad5
Rob Crittenden added support for NSS (Network Security Service) for the
...
SSL/TLS layer. http://www.mozilla.org/projects/security/pki/nss/
2007-02-12 22:32:37 +00:00
Yang Tse
8c9233f6b2
Include both testutil.c and testutil.h, and not just testutil.c, in the
...
list of source files for those tests that use it. Otherwise testutil.h
might not be found by the compiler.
2007-02-09 12:41:57 +00:00
Yang Tse
6fcf98f617
Some tests were using functions curlx_tvnow and curlx_tvdiff which are not
...
part of the official libcurl API http://curl.haxx.se/lxr/source/lib/README.curlx
The documented way of using them would be to use timeval.c as a source code file.
The above described method works very well when statically linking libcurl and
apps, test programs, but has several drawbacks when you build a true shared
libcurl (i.e. Name space clash at linkage stage as functions are defined more
than once. Windows makefiles are not capable of handling this system of
source-level sharing)
So...
Now testutil.h and testutil.c define and implement tutil_tvnow and tutil_tvdiff
which replace curlx_tvnow and curlx_tvdiff for the libtest programs. Doing this
we avoid the above described problems, and the code in the testsuite does not
impose the need to keep those functions public in libcurl even when not part of
the API.
2007-02-09 01:17:24 +00:00
Yang Tse
2f4fe0175b
Some tests were using functions curlx_tvnow and curlx_tvdiff which are not
...
part of the official libcurl API http://curl.haxx.se/lxr/source/lib/README.curlx
The documented way of using them would be to use timeval.c as a source code file.
The above described method works very well when statically linking libcurl and
apps, test programs, but has several drawbacks when you build a true shared
libcurl (i.e. Name space clash at linkage stage as functions are defined more
than once. Windows makefiles are not capable of handling this system of
source-level sharing)
So...
Now testutil.h and testutil.c define and implement tutil_tvnow and tutil_tvdiff
which replace curlx_tvnow and curlx_tvdiff for the libtest programs. Doing this
we avoid the above described problems, and the code in the testsuite does not
impose the need to keep those functions public in libcurl even when not part of
the API.
2007-02-09 01:11:14 +00:00
Yang Tse
9b6474378a
Year 2038 has its own problems (32 bit integer overflow).
...
So cookie expiration date is lowered to expire at most in 2035.
2007-02-05 02:38:25 +00:00
Gisle Vanem
a7748c2024
Constify argument to suburl(). Remove trailing space.
2007-02-04 12:12:02 +00:00
Yang Tse
c26ec47e90
compiler warning fix
2007-02-02 17:16:06 +00:00
Yang Tse
f71c8c7d84
fix leftover updating cookie expiration date
2007-02-02 11:49:15 +00:00
Yang Tse
68f3c2adca
reported in bug: #1566077 the former URL mentioned in the generated cookie
...
jar has died and we now instead point out our own version of that
2007-02-02 02:12:34 +00:00
Yang Tse
2a8e2edf83
fix test case 62 which was failing due to cookies expiring 1 Feb 2007
2007-02-02 01:36:08 +00:00
Yang Tse
401598c2fe
more fixes for the testsuite cookie expiration issue
2007-02-02 01:05:50 +00:00
Yang Tse
d60848d04b
cookie expiration time got us with pants at our knees.
...
Next time in 2038 :-)
2007-02-02 00:10:40 +00:00
Yang Tse
c2639e0738
when using select() instead of poll, skip the test if the number of
...
open file descriptors is greater than FD_SETSIZE minus SAFETY_MARGIN,
also skip the test if any of the open file descriptors has a number
greater than FD_SETSIZE minus SAFETY_MARGIN.
2007-01-31 15:34:53 +00:00
Yang Tse
d7d5baa0e2
fix temp string buffer variable name
2007-01-30 13:21:39 +00:00
Yang Tse
bad67830b3
skip test on platforms on which we use select() instead
...
of poll() and select() happens to be bound by FD_SETSIZE
2007-01-30 03:48:29 +00:00
Daniel Stenberg
a4b39c6ab8
the same source file is re-used for multiple tests and I missed to add the
...
timval.c dependency on some of those
2007-01-29 20:37:02 +00:00
Gisle Vanem
d10e174fd1
Some compilers lacks <sys/time.h>. Include "timeval.h" to simplify the #ifdefs.
2007-01-29 20:24:00 +00:00
Daniel Stenberg
4d8dcf7b77
the libtest source codes that use curlx_tv* functions MUST use the
...
lib/timeval.c source code since those functions are not in the API (and might
not be accessible)
2007-01-29 10:09:06 +00:00
Daniel Stenberg
abdbd3100f
- Michael Wallner reported that when doing a CONNECT with a custom User-Agent
...
header, you got _two_ User-Agent headers in the CONNECT request...! Added
test case 287 to verify the fix.
2007-01-29 09:26:36 +00:00
Yang Tse
e09450103b
Compiler warning fix
2007-01-28 03:51:10 +00:00
Yang Tse
b6f889085d
update copyright year notice
2007-01-27 03:43:05 +00:00
Gunter Knauf
abb4cdafe9
set proper lib extension for non-configure mingw32 builds on Win32.
2007-01-25 14:06:38 +00:00
Dan Fandrich
44ac2776ae
Fixed a dangling pointer problem that prevented the http_proxy environment
...
variable from being properly used in many cases (and caused test case 63
to fail).
2007-01-25 01:35:43 +00:00
Dan Fandrich
f68323da7d
Ignore XML DOCTYPEs and declarations.
2007-01-23 20:24:26 +00:00
Dan Fandrich
33bea767eb
Convert (most of) the test data files into genuine XML. A handful still
...
are not, due mainly to the lack of support for XML character entities
(e.g. & => & ). This will make it easier to validate test files using
tools like xmllint, as well as edit and view them using XML tools.
2007-01-23 02:25:56 +00:00
Dan Fandrich
6da70628c6
Make the test script tag parser a bit more robust.
...
Check for the .exe extension on mingw32 builds.
2007-01-18 20:32:46 +00:00
Dan Fandrich
3bae748256
Added precheck that curl supports the 'openssl' engine in test 307.
2007-01-18 18:04:20 +00:00
Dan Fandrich
521c4b303d
Fixed some tag typos in the test data files.
2007-01-17 20:36:56 +00:00
Dan Fandrich
a2effd123a
Disabled test 307 for now.
2007-01-17 19:23:32 +00:00
Dan Fandrich
32fe5b14ec
Added simple OpenSSL crypto engine tests.
2007-01-16 18:34:58 +00:00
Dan Fandrich
f11d3c329c
Added TFTP upload tests.
2007-01-15 21:06:12 +00:00
Dan Fandrich
b0d13fa4cb
Leave the TFTPD test server running after a file upload.
...
Flush the protocol log data so it's immediately available to the test harness.
2007-01-15 21:03:53 +00:00
Dan Fandrich
5ec5b95f54
Added test for TFTP retrieve of boundary case 512 byte file.
2007-01-10 23:40:22 +00:00
Dan Fandrich
7efb955fd0
Added test of TFTP server error reporting.
2007-01-10 03:32:19 +00:00
Daniel Stenberg
e61e09f658
prevent compiler warning since we use base64.h from libcurl which now has
...
function(s) using SessionHandle pointers
2007-01-04 23:04:50 +00:00
Daniel Stenberg
88c8d72a21
Alexey Simak found out that when doing FTP with the multi interface and
...
something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
2006-12-11 09:32:58 +00:00
Daniel Stenberg
090f5a9a45
added the new test 282
2006-11-25 13:32:48 +00:00
Daniel Stenberg
da58d03ff7
Venkat Akella found out that libcurl did not like HTTP responses that simply
...
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.
To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
2006-11-25 13:32:04 +00:00
Yang Tse
268fe09322
Revert ftpserver.pl back to revision 1.74 Adding change done in 1.76
...
This is done to back out changes done in revisions 1.77 and 1.75
2006-11-20 16:58:41 +00:00
Yang Tse
7a557e984a
Revert runtests.pl back to revision 1.212
...
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20 16:58:04 +00:00
Yang Tse
f1a55cbe6d
Revert ftp.pm back to revision 1.5 Adding copyright notice.
...
This is done to back out changes done from revisions 1.6 to 1.10
2006-11-20 16:57:01 +00:00
Yang Tse
1e35d95df8
Add some message logging
2006-11-20 10:35:25 +00:00
Yang Tse
d8387b418d
stop slaves before stopping servers
2006-11-20 06:22:51 +00:00
Yang Tse
adea16a294
Revert to KILL test servers until all test servers
...
have proper TERM and INT signal handlers implemented.
2006-11-20 03:25:17 +00:00
Daniel Stenberg
7f2d5cab2d
log the sleep, like when done in test 190
2006-11-19 22:48:40 +00:00
Yang Tse
8db353e1d7
Avoid passing child pid and test server pid, using the running
...
servers hash, and adjust message arguments accordingly.
2006-11-19 03:47:56 +00:00
Yang Tse
e6978117a7
Comment out the use of the "warnings" module now that ftp.pm seems to
...
be clear of warnings. Uncomment it if this module is further modified.
The "warnings" module requires perl 5.006 or later. Previous perl
versions don't have it and die on missing modules.
2006-11-19 03:47:11 +00:00
Yang Tse
0b5e1a9b2f
Avoid keeping dupe pids When forked pid and test server pid is the same one.
2006-11-18 04:07:01 +00:00
Yang Tse
2e17a97474
Fix warning "Use of uninitialized value in ...".
...
If the list has only one item avoid sort subroutine.
2006-11-18 04:05:42 +00:00
Yang Tse
74ddbd8a3b
The hash of running servers is now a hash of hashes which for each running
...
server holds not only its two main pids, but also the pidfile of the test
server and the 'slavepidfiles' for ftp* servers. This allows a better control
when stopping servers.
Now from runtests.pl when test servers are stopped they are signalled in
sequence TERM, INT and KILL allowing time in between for them to die. This
will give us a chance of gracefully stopping test servers, which we didn't
have when we were killing them in first instance.
2006-11-17 16:44:22 +00:00
Daniel Stenberg
e264f699d4
Tor Arntsen spotted this mistake
2006-11-13 13:48:55 +00:00
Yang Tse
17d4f9513e
Remove showing stderr log files unconditionally for tests 518 and 537.
...
Add failure checking for servers when fork()ed.
Use same code path in 'stopserver' when called with a single or multiple pids.
2006-11-09 13:20:42 +00:00
Yang Tse
318a7584f3
add a couple more of debugging messages
2006-11-03 14:13:25 +00:00
Yang Tse
78081a1652
reduce max size of dinamically allocated arrays to minimize the nasty
...
behaviour some versions of IRIX exhibit of committing suicide on big
mallocs instead of just returning a friendly null pointer
2006-11-03 10:05:21 +00:00
Yang Tse
1dee2cd55e
fix comments and renumber rlimit return codes
...
fix closing of fd's when limit is reached
2006-11-03 01:57:25 +00:00
Yang Tse
426ecfd136
fix comments and renumber rlimit return codes
2006-11-03 01:56:55 +00:00
Yang Tse
7f1870da5f
remove leftover comment
2006-11-02 20:56:40 +00:00
Yang Tse
2149a095f7
update and split test cases 518 and 537 into its own source code file
2006-11-02 20:50:18 +00:00
Yang Tse
e8d21adbaa
code cleanup
2006-11-02 15:47:24 +00:00
Yang Tse
fa28531322
use our internal string functions and replace sprintf with snprintf
2006-11-02 03:45:07 +00:00
Yang Tse
deef85ca9a
Update protocol verification end of lines
2006-11-02 01:21:28 +00:00
Yang Tse
4f4427ff41
check symbol HAVE_UNISTD_H instead of UNISTD_H to include unistd.h
2006-11-02 00:34:21 +00:00
Yang Tse
905ca77c9e
test 518 is all about testing libcurl functionality
...
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
2006-11-01 18:33:50 +00:00
Yang Tse
f51c567de3
Show stderr log file for test 518 unconditionally.
...
In this way we'll be able to sort out problems that might
arise in the prechek phase of the 518 test.
Once that 518 has been verified this change will be undone.
2006-10-31 01:30:42 +00:00
Yang Tse
9b2acca63e
Sync comment with code and add three messages more
2006-10-31 01:24:03 +00:00
Yang Tse
afcd9f1b1c
Address some pitfalls in the rlimit() function check that were
...
preventing execution of this test on many platforms
2006-10-30 17:24:31 +00:00
Yang Tse
609044aea2
Compiler warning fix
2006-10-29 21:19:23 +00:00
Daniel Stenberg
5aa0db8681
a small unification of the error text on failed server startups
2006-10-27 21:07:08 +00:00
Yang Tse
772a985dc3
Update copyright year, since the file has been modified
2006-10-27 03:47:57 +00:00
Yang Tse
32ad212ac9
30 seconds isn't long enough for this test on a loaded server.
2006-10-27 01:58:59 +00:00
Gisle Vanem
125830ab4b
Use proper 'stat' structure for fstat(). I.e. 'struct _stati64' and '_fstati64()'
...
on Win32.
2006-10-26 14:30:11 +00:00
Yang Tse
5b75b423e6
Improved rlimit logic:
...
- Take in account RLIM_INFINITY.
- Verify that soft limit is actually changed when doing so.
- Show errno in case getrlimit or setrlimit fails.
- Keep file descriptors open only while runing this test.
2006-10-26 13:55:24 +00:00
Yang Tse
cd3029f36f
30 seconds isn't long enough for this test on a loaded server.
2006-10-26 09:50:21 +00:00
Daniel Stenberg
cde5e35d9b
Fixed CURLOPT_FAILONERROR to return CURLE_HTTP_RETURNED_ERROR even for the
...
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
2006-10-25 20:40:14 +00:00
Yang Tse
b4700f026b
Add project notice and file Id
2006-10-25 09:20:44 +00:00
Yang Tse
d771fa7c48
Compiler warning fix
2006-10-25 08:52:00 +00:00
Yang Tse
384c8f3560
Use curl_global_init() and curl_global_cleanup().
...
Improve cleanup in case of initialization failure.
2006-10-25 05:59:46 +00:00
Yang Tse
c54a4301ee
Abort test if it seems that it would have run forever. This is just to prevent
...
test hanging and actually is an indication that there's a condition that is
not being properly handled at some point in the library.
Remove a pair of braces and adjust indentation appropriately.
2006-10-24 15:51:42 +00:00
Yang Tse
13e60c55a1
Avoid trying to compare more than strlen bytes.
2006-10-23 19:16:19 +00:00
Dan Fandrich
9b8b1a68f0
30 seconds isn't long enough for this test on a loaded server.
2006-10-23 19:15:14 +00:00
Yang Tse
4ec9316155
Replace is*() macros with our own IS*() ones.
2006-10-23 19:14:54 +00:00
Daniel Stenberg
90933ac660
rely on the global LDADD instead of having specific ones for every program
2006-10-21 13:00:51 +00:00
Daniel Stenberg
deb81b2ad4
Nir Soffer made the tests/libtest/Makefile.am use a proper variable for all
...
the single test applications' link and dependences, so that you easier can
override those from the command line when using make.
2006-10-21 11:40:04 +00:00
Daniel Stenberg
4e717cdb30
Armel Asselin separated CA cert verification problems from problems with
...
reading the (local) CA cert file to let users easier pinpoint the actual
problem. CURLE_SSL_CACERT_BADFILE (77) is the new libcurl error code.
2006-10-21 11:32:05 +00:00
Yang Tse
33acd6f041
Compiler warning fix
2006-10-21 10:54:41 +00:00
Yang Tse
d997ff6aa8
Oops! Actually set the limit to 30 seconds.
2006-10-20 15:45:12 +00:00
Yang Tse
b9ccecf86e
Decrease the posibility of aborting a test which actually is not
...
stale by replacing loop counters with timeouts. In this way the
main loop of the test will be allowed to run up to 30 seconds on
any platform before aborting it.
2006-10-20 15:39:54 +00:00
Yang Tse
19e07771d1
Set loop2 counter limit to 60 on this test to avoid a false positive.
2006-10-19 23:35:52 +00:00
Yang Tse
ef267ab449
Replace tabs with spaces and Compiler warning fix.
2006-10-19 22:49:33 +00:00
Yang Tse
4f6ed683e8
Compiler warning fix
2006-10-19 22:48:33 +00:00
Yang Tse
c818e7064f
When aborting, show loop counter values when more than one counter exists.
2006-10-19 21:12:27 +00:00
Yang Tse
ead6ab2ef7
Abort test if it seems that it would have run forever. This is just to prevent
...
test hanging and actually is an indication that there's a condition that is
not being properly handled at some point in the library.
Loop counter limits might need to be further increased on false positives.
2006-10-19 17:29:25 +00:00
Yang Tse
5df4be1165
Check for USE_WINSOCK instead of WIN32 where the check was done
...
to verify winsock API availability.
2006-10-18 21:05:40 +00:00
Daniel Stenberg
b61fbbde46
buildconf already runs ares/buildconf by itself if there is an ares subdir
...
present, so there's no use to doing it again in this script!
2006-10-17 11:46:42 +00:00
Yang Tse
e150150d9f
Remove redundant __CYGWIN__ symbol check
2006-10-11 16:01:16 +00:00
Yang Tse
943f0733bb
Compiler warning fix
2006-10-10 23:58:02 +00:00
Yang Tse
8274447dd9
Call curl_global_cleanup() in all code paths before exiting test
2006-10-10 23:50:37 +00:00
Daniel Stenberg
cbcdd337aa
Added test case 536 in an attempt to add Bogdan Nicula's problematic case
...
with multi interface and pipelining. This test just works and did not repeat
the problem his test code showed, but could still serve as a useful test.
2006-10-09 21:29:53 +00:00
Daniel Stenberg
c144adf77c
used for test 535 too
2006-10-09 21:26:09 +00:00
Yang Tse
15e3dfe1d3
Compiler warning fix
2006-10-09 11:21:40 +00:00
Daniel Stenberg
a1de9367ec
Bogdan Nicula's second test case (posted Sun, 08 Oct 2006) converted to test
...
case 535 and it now runs fine. Again a problem with the pipelining code not
taking all possible (error) conditions into account.
2006-10-09 06:58:05 +00:00
Daniel Stenberg
2ad7fcbc2f
test 534 added in an attempt to repeat Bogdan Nicula's bug...
2006-10-08 10:51:53 +00:00
Daniel Stenberg
2c62dfd124
modified lib533 to accept both URLs on the command line
2006-10-08 08:50:12 +00:00
Daniel Stenberg
ef66497a0d
Fix a "sockfilt" leak. When a new 'data' connection sockfilt server is started,
...
make sure that a previously used one is killed first (since they re-use the
same .pid file etc)
2006-10-08 08:43:32 +00:00
Daniel Stenberg
befc30bc55
Bogdan Nicula's hanging test case was converted to test case 533 and the test
...
now runs fine.
2006-10-06 21:19:57 +00:00
Daniel Stenberg
ca5846cde9
catch silly mistakes better
2006-10-06 21:19:40 +00:00
Daniel Stenberg
552b963e6d
Dmitriy Sergeyev provided an example source code that crashed CVS libcurl
...
but that worked nicely in 7.15.5. I converted it into test case 532 and
fixed the problem.
2006-10-04 21:11:08 +00:00
Daniel Stenberg
5e0d9aea32
Support for FTP third party transfers is now dropped
2006-09-30 20:31:11 +00:00
Daniel Stenberg
ae13c93b7d
Reported in #1561470 ( http://curl.haxx.se/bug/view.cgi?id=1561470 ), libcurl
...
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
2006-09-28 21:26:06 +00:00
Daniel Stenberg
68e9f75708
As reported in bug: #1566077 the former URL mentioned in the generated cookie
...
jar has died and we now instead point out our own version of that
2006-09-27 21:00:45 +00:00
Daniel Stenberg
f1d707705e
allow user in passwd state for test 280 to work (--ftp-alternative-to-user)
2006-09-24 10:30:02 +00:00
Daniel Stenberg
0992e391ba
filled in some docs for the FTP server control commands
2006-09-23 20:39:34 +00:00
Daniel Stenberg
b22aaeef6a
added simple test of --ftp-alternative-to-user
2006-09-23 20:39:15 +00:00
Daniel Stenberg
e7d90e08b9
Added test case 531 in an attempt to repeat bug report #1561470
...
(http://curl.haxx.se/bug/view.cgi?id=1561470 ) that is said to crash when an
FTP upload fails with the multi interface. It did not, but I made a failed
upload still assume the control connection to be fine.
2006-09-21 20:52:20 +00:00
Daniel Stenberg
ec4a16f2e0
Armel Asselin fixed problems when you gave a proxy URL with user name and
...
empty password or no password at all. Test case 278 and 279 were added to
verify.
2006-09-20 21:49:41 +00:00
Gisle Vanem
56bf97ffc9
'in6addr_any' must be placed in .c-file. Added 'REAL_WIN32' for
...
all Win32 targets except CygWin. Cleanup.
2006-09-13 13:41:53 +00:00
Daniel Stenberg
e55d4fd5c1
nicer reporting of disabled tests
2006-09-13 10:48:03 +00:00
Daniel Stenberg
5ee231415f
added CVS id and clarified the comment lines
2006-09-13 10:18:01 +00:00
Daniel Stenberg
c866771cd2
Added a generic way to disable test cases when "all" is run, and added the
...
FTP 3rd party transfers to that file for now until I have them sorted out.
2006-09-13 10:16:36 +00:00
Yang Tse
5a6c89661a
Cygwin preprocessor adjustments
2006-09-12 01:17:16 +00:00
Daniel Stenberg
29dc39fce1
- Fixed my breakage from earlier today so that doing curl_easy_cleanup() on a
...
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
2006-09-11 17:18:18 +00:00
Gisle Vanem
e134a40208
Added select_test() function to allow selecting on no sockets on
...
Winsock.
2006-09-10 19:01:04 +00:00
Gisle Vanem
145084b699
Print usage in case 'arg2 == NULL'.
2006-09-09 16:55:21 +00:00
Daniel Stenberg
e9160a31e0
removed the comment that isn't valid for this file, just a copy'n paste error
2006-09-08 12:03:55 +00:00
Daniel Stenberg
e3c15fc4b9
test 530 is the first ever HTTP pipelining test for libcurl
2006-09-08 11:56:56 +00:00
Daniel Stenberg
b7eeb6e67f
Major overhaul introducing http pipelining support and shared connection
...
cache within the multi handle.
2006-09-07 21:49:20 +00:00
Daniel Stenberg
a932803eac
Invoke memanalyze from the source path and hush up about killing the FTP
...
server as part of test cases
2006-09-06 10:03:34 +00:00
Daniel Stenberg
dc9f154823
added missing test
2006-08-31 22:18:08 +00:00
Dan Fandrich
cd6c58216a
Use /usr/bin/env to invoke perl like the other test scripts.
2006-08-23 21:20:00 +00:00
Daniel Stenberg
cfdcae4bc7
Based on a patch by Armel Asselin, the FTP code no longer re-issues the TYPE
...
command on subsequent requests on a re-used connection unless it has to.
2006-08-19 21:18:36 +00:00
Daniel Stenberg
490cccba3c
Andrew Biggs pointed out a "Expect: 100-continue" flaw where libcurl didn't
...
send the whole request at once, even though the Expect: header was disabled
by the application. An effect of this change is also that small (< 1024
bytes) POSTs are now always sent without Expect: header since we deem it
more costly to bother about that than the risk that we send the data in
vain.
2006-08-18 22:54:57 +00:00
Yang Tse
ee3514ccdc
Replace exit() with return() in main()
2006-08-14 17:00:08 +00:00
Yang Tse
b33f47804d
Allow again proper compilation outside of the source tree
2006-08-07 18:06:37 +00:00
Yang Tse
aa791ee5cf
Fix compiler warnings.
2006-07-29 09:15:03 +00:00
Yang Tse
2c81bfead5
Replace send() and recv() with swrite() and sread() macros.
2006-07-28 18:01:23 +00:00
Daniel Stenberg
c10d15aa0f
test case 277 - HTTP RFC1867-type formposting with custom Content-Type
2006-07-27 22:44:56 +00:00
Yang Tse
ab4256d53a
Abort if unable to write pid file, and close socket when aborting.
2006-07-19 15:28:30 +00:00
Yang Tse
46c5e562bf
Abort if unable to write pid file.
2006-07-19 15:26:28 +00:00
Yang Tse
42f5a90d09
-Use curl_socket_t instead of int.
...
-Log errno in message if setsockopt() fails.
-Close listener socket on major errors.
2006-07-17 22:44:40 +00:00
Yang Tse
431c4bd6e3
tests/libtest/lib506.c version 1.11 is now also logging CURLSHOPT_LOCKFUNC, CURLSHOPT_UNLOCKFUNC and CURLSHOPT_USERDATA, so we now also have to check them here.
2006-07-17 16:47:07 +00:00
Yang Tse
773bec5ae5
Fix compiler warning "enumerated type mixed with another type"
2006-07-17 14:32:19 +00:00
Yang Tse
2aa4710745
Minor cleanup
2006-07-17 03:38:13 +00:00
Yang Tse
ccfce89423
Null terminate string in buffer before feeding it to strtol()
2006-07-14 06:31:41 +00:00
Yang Tse
498aad8587
Change to meaningful var names and take care of a compiler warning on IRIX 6.5.22 MIPSPro C 7.3 64bit
2006-07-13 18:50:51 +00:00
Yang Tse
f0694c582e
Remove var not used.
2006-07-12 10:41:07 +00:00
Yang Tse
f90f0c98d9
Log a message if not all data is sent.
2006-07-12 09:39:35 +00:00
Yang Tse
95aecc5dbb
Fix compiler warning: comparison between signed and unsigned
2006-07-12 09:03:48 +00:00
Yang Tse
8272874704
Place parenthesis surrounding macro parameters so that the use of sread and swrite is more intuitive.
2006-07-12 06:52:40 +00:00
Yang Tse
86f4cead16
sread now returns ssize_t
2006-07-12 06:14:49 +00:00
Yang Tse
88a1a10e6f
Pay attention when typecasting an operation
2006-07-12 06:09:53 +00:00
Yang Tse
624e657210
sread now returns ssize_t
2006-07-12 05:54:06 +00:00
Yang Tse
58176d1484
Use platform's native types for recv() and send() arguments.
2006-07-12 05:19:00 +00:00
Daniel Stenberg
28611704d9
Ates Goral pointed out that libcurl's cookie parser did case insensitive
...
string comparisons on the path which is incorrect and provided a patch that
fixes this. I edited test case 8 to include details that test for this.
2006-07-08 18:52:08 +00:00
Gisle Vanem
cc5174a89a
Fix "'x' might be used uninitialized in this function" warnings.
2006-06-10 17:35:28 +00:00
Daniel Stenberg
7929600798
stricter type use to please compilers
2006-06-09 08:25:16 +00:00
Daniel Stenberg
6a03ab3ad4
lib525.c does a FTP upload with PORT using multi interface
2006-06-08 22:43:21 +00:00
Daniel Stenberg
2bd3033f68
NTLM2 session response support
2006-06-07 14:14:04 +00:00
Daniel Stenberg
edb5444fa3
reverted the previous .libs check for libs, but instead make mingw32 builds
...
more similar to other configure builds (== use .la for libext and no binext)
2006-05-27 11:36:05 +00:00
Daniel Stenberg
3718737091
better check for libs created in the .libs directory since libtool does this
...
kind of magic
2006-05-25 11:04:08 +00:00
Daniel Stenberg
f689d06ca9
make sure we pass a time_t * to localtime(), and the timeval struct members
...
are not always time_t ones
2006-05-24 21:39:52 +00:00
Daniel Stenberg
4a8dfb3461
based on Tor Arntsen's fix, this should correct test case 271 to again run
...
fine
2006-05-24 15:22:03 +00:00
Daniel Stenberg
973ed24dc8
1 - allow much longer time for the test FTP server to startup and get verified
...
2 - store the time it took to verify it and allow that time to be used as
%FTPTIME[23] in command lines to allow us to adjust better to slow hosts
since test 190 failed on my slow solaris machine just because it hadn't
gotten time to run all the way the test assumed all machines would reach
before the time-out elapsed.
2006-05-11 06:34:30 +00:00
Daniel Stenberg
975534370f
My Solaris test server was simply too slow to be able to respond within 4
...
seconds even when everything is fine! Now we allow a test server 8 seconds
to respond to still be considered ok.
2006-05-10 21:38:46 +00:00
Daniel Stenberg
00312e95fe
removed variable declarations shadowing previously declared variables
2006-05-10 09:53:52 +00:00
Daniel Stenberg
95152aec68
David McCreedy brought line end conversions when doing FTP ASCII
...
transfers. They are done on non-windows systems and translate CRLF to LF.
2006-04-26 07:40:37 +00:00
Daniel Stenberg
e5babd086d
if configure found a fork(), sws supports --fork which is *NOT* used by the
...
ordinary test suite. Also removed the perror() calls and instead made the
logging output the errno code to ease error tracking using logs.
2006-04-10 13:11:52 +00:00
Daniel Stenberg
c212ebbdda
output the exit code from stunnel to stderr in case it is non-zero
2006-04-10 13:10:25 +00:00
Daniel Stenberg
83b8de3d43
support --fork and pass that on to sws
2006-04-10 13:09:56 +00:00
Daniel Stenberg
e174d374f2
Scan for 'stunnel4' before 'stunnel' since debian have them setup this way
...
and it should break most other systems. The "funny" part is that debian
actually have a 'stunnel' setup to simulate stunnel v3 but it breaks our own
stunnel-version-detect-and-adjust-to-it system.
Added initial support for optionally running servers with fork support.
2006-04-10 13:03:20 +00:00
Daniel Stenberg
4edb93508d
Use correct content-length. Found out by patching the libcurl read to only
...
read one byte at a time...
2006-04-10 12:26:08 +00:00
Daniel Stenberg
b0adcd6a46
cut off a bit more of the type-2 ntlm message since it differs between
...
hosts
2006-04-05 12:46:03 +00:00
Daniel Stenberg
be285cde3f
Michele Bini modified the NTLM code to work for his "weird IIS case"
...
(http://curl.haxx.se/mail/lib-2006-02/0154.html ) by adding the NTLM hash
function in addition to the LM one and making some other adjustments in the
order the different parts of the data block are sent in the Type-2 reply.
Inspiration for this work was taken from the Firefox NTLM implementation.
I edited the existing 21(!) NTLM test cases to run fine with these news. Due
to the fact that we now properly include the host name in the Type-2 message
the test cases now only compare parts of that chunk.
2006-04-05 12:35:48 +00:00
Daniel Stenberg
bcc62cc9e3
#1451929 ( http://curl.haxx.se/bug/view.cgi?id=1451929 ) detailed a bug that
...
occurred when asking libcurl to follow HTTP redirects and the original URL had
more than one question mark (?). Added test case 276 to verify.
2006-03-28 08:03:25 +00:00
Daniel Stenberg
33df856925
If run on a curl built shared, detect this and invoke libtool for gdb
...
accordingly.
2006-03-03 14:37:44 +00:00
Daniel Stenberg
ce09cedd2e
added test524
2006-03-03 13:12:39 +00:00
Daniel Stenberg
7d68101f83
Prevent uploading to a URL that has no file name part.
2006-03-03 13:09:30 +00:00
Gisle Vanem
f592ea6c30
Fix typo.
2006-02-25 18:57:20 +00:00
Dan Fandrich
d29147565c
Fixed test case 57 (KNOWN_BUG #18 )
2006-02-22 23:55:28 +00:00
Daniel Stenberg
10beb36b1c
Ulf Härnhammar fixed a format string (printf style) problem in the Negotiate
...
code. It should however not be the cause of any troubles. He also fixed a
few similar problems in the HTTP test server code.
2006-02-18 22:27:01 +00:00
Daniel Stenberg
e96445bd02
how silly, the cookie expired! ;-)
2006-02-06 20:02:14 +00:00
Daniel Stenberg
67bf4f28ff
Michal Marek provided a patch for FTP that makes libcurl continue to try PASV
...
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
2006-01-24 14:40:43 +00:00
Daniel Stenberg
fcfd6d9504
Duane Cathey was one of our friends who reported that curl -P [IP]
...
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
2006-01-19 23:52:03 +00:00
Daniel Stenberg
67a83c1b34
David Shaw finally removed all traces of Gopher and we are now officially
...
not supporting it. It hasn't been functioning for years anyway, so this is
just finally stating what already was true. And a cleanup at the same time.
2006-01-16 22:14:37 +00:00
Daniel Stenberg
bebf70667d
Andrew Benham fixed a race condition in the test suite that could cause the
...
test script to kill all processes in the current process group!
2006-01-13 12:16:16 +00:00
Daniel Stenberg
bda1e9aeab
Made the copyright year match the latest modification's year.
2006-01-09 13:17:14 +00:00
Daniel Stenberg
8a0ca3066e
modified output to prevent the autobuild system to trap on the 'FAILED' output
...
mistaking it for an actual failed test case
2006-01-04 23:02:40 +00:00
Daniel Stenberg
81b9793807
Added remake of the arpa/tftp.h file to make the TFTP server build on systems
...
without the real header file.
2006-01-03 22:47:07 +00:00
Daniel Stenberg
7278f17e8f
killed trailing whitespace
2006-01-03 22:44:58 +00:00
Daniel Stenberg
66c7427df0
Andres Garcia made the TFTP test server build with mingw ("I also had to copy
...
the 'tftp.h' file from a linux box, since it doesn't come with mingw.")
2006-01-03 22:19:15 +00:00
Daniel Stenberg
687cf0235e
modified to hush compiler warnings
2006-01-03 12:18:22 +00:00
Daniel Stenberg
74a299fd08
1. sws now supports two new "commands" and 2. if built with
...
CURL_SWS_FORK_ENABLED defined it forks for each new connection and thus can
support any amount of connection clients (used for hiper tests and not for the
standard plain curl test suite)
2006-01-02 12:19:12 +00:00
Dan Fandrich
178afd81a9
Fixed lcc compiler warnings.
2005-12-19 19:47:14 +00:00
Yang Tse
d6c5d24af3
Cleanup windows header includes. Where aplicable, inclusion of
...
windows.h winsock.h winsock2.h ws2tcpip.h is done in setup.h
2005-12-18 15:36:14 +00:00
Dan Fandrich
6005a461bb
Log CPPFLAGS environment variable along with the others.
2005-12-13 19:07:33 +00:00
Dan Fandrich
e2df946eee
Fixed some compiler warnings on lcc.
2005-12-13 18:54:31 +00:00
Yang Tse
b1fece74e3
Fix compiler warning
2005-12-08 16:43:32 +00:00
Yang Tse
93d59520e4
If unable to get curl's version, log all failure details.
2005-12-08 11:29:47 +00:00
Daniel Stenberg
59b6cb9e91
Yang Tse: fixed compiler warning
2005-12-06 07:47:37 +00:00
Daniel Stenberg
e06afaeb7a
Yang Tse: With last change logging directory needs to be created sooner.
2005-12-06 07:44:18 +00:00
Daniel Stenberg
1d8212e53a
Yang Tse: make runtests.pl more talkative when unable to find out curl's
...
version.
2005-12-05 19:23:56 +00:00
Daniel Stenberg
272231fb09
Another Yang Tse warning cleanup raid!
2005-12-05 14:10:48 +00:00
Daniel Stenberg
a5fcb26ab1
modified to the new error text for range error
2005-11-10 22:22:38 +00:00
Daniel Stenberg
80f2e3f263
test 275 makes a CONNECT through a proxy and then gets two pages from the
...
same server
2005-10-30 23:15:49 +00:00
Daniel Stenberg
966fa848a0
Nis Jorgensen filed bug report #1338648
...
(http://curl.haxx.se/bug/view.cgi?id=1338648 ) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
2005-10-27 22:05:38 +00:00
Daniel Stenberg
be9c873a6e
Dave Dribin made libcurl understand and handle cases when the server
...
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
2005-10-20 20:07:32 +00:00
Daniel Stenberg
68917eb517
added test case 272 for -z download over FTP when the timestamp is identical
...
to the remote one
2005-10-05 06:23:45 +00:00
Daniel Stenberg
4ec55a964d
fixed the proper path to the tftpd server
2005-09-30 14:25:50 +00:00
Daniel Stenberg
da3992d2e9
added test 271
2005-09-19 22:04:14 +00:00
Daniel Stenberg
48908e4633
test 271, the first ever TFTP test
2005-09-19 22:04:06 +00:00
Daniel Stenberg
f5ae149338
seems to work for test 271 on Linux now!
2005-09-19 22:03:16 +00:00
Daniel Stenberg
90559bed53
renamed sendfile() since some systems have a system call named like this -
...
now the functions are named sendtftp() and recvtftp() instead.
2005-09-16 10:52:38 +00:00
Daniel Stenberg
973a18cf03
In the Solaris 7 header files for tftp, the th_stuff struct member is an
...
unsigned short. Trying a typecast here to fix.
2005-09-16 10:50:43 +00:00
Daniel Stenberg
3c666ce57a
prevent warnings on re-defining MIN
2005-09-16 07:19:54 +00:00
Daniel Stenberg
da3ecc91f8
use int "subscripts" to prevent warnings from picky compilers
2005-09-16 06:14:30 +00:00
Daniel Stenberg
09c8f558f7
use internal *printf() clones
2005-09-16 05:49:53 +00:00
Daniel Stenberg
528a149def
ifdef for includes, added checking for two not previously checked files (one
...
being necessary for solaris builds)
2005-09-15 21:50:50 +00:00
Daniel Stenberg
29e36afb6b
use make -k when running the tests
2005-09-15 21:49:26 +00:00
Daniel Stenberg
0e39543d35
ignore this too
2005-09-15 20:36:58 +00:00
Daniel Stenberg
0de20d8ee6
build tftpd too!
2005-09-15 20:36:28 +00:00
Daniel Stenberg
cd5de5c0e5
First version of the TFTP server. Basic functionality is there.
2005-09-15 20:32:59 +00:00
Daniel Stenberg
bd5afc26bd
added TFTP and TFTP-ipv6 support
2005-09-15 20:25:02 +00:00
Daniel Stenberg
9542dfdcdc
moved test2file() to util.c
2005-09-15 20:22:43 +00:00
Daniel Stenberg
b9c8de598b
Thanks to Scott Davis' detailed reports, I found this premature detection
...
of the end of a chunked-encoded POST request.
2005-09-07 10:51:37 +00:00
Daniel Stenberg
7e845e7cfd
Added FTP_SKIP_PASV_IP and --ftp-skip-pasv-ip
2005-09-04 05:16:06 +00:00
Gunter Knauf
75dbb3189a
quick hack to make it working again on Win32 - however we should consider to set some defaults depending on the compiler architecture we guess we are since it doesnt work well if we prefer building the msvc makefile with gmake instead of nmake because we found gmake first in path....
2005-08-30 18:37:08 +00:00
Daniel Stenberg
a4773fcbbb
Toby Peterson added CURLOPT_IGNORE_CONTENT_LENGTH to the library, accessible
...
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
2005-08-24 10:57:28 +00:00
Daniel Stenberg
1e038c4bc6
valgrind version 3 renames the --logfile command line option to --log-file...
2005-08-24 10:49:57 +00:00
Daniel Stenberg
e22ac39da4
detabify
2005-08-18 08:47:56 +00:00
Daniel Stenberg
9ad92b3007
added test 268 that makes curl -d @nonexisting
2005-08-12 22:09:21 +00:00
Daniel Stenberg
c0d343d56d
do a POST with NTLM and add two custom headers
2005-08-11 21:33:40 +00:00
Gunter Knauf
f451bb7c49
fix for NetWare crossbuilds to display the right config.h when build on Win32.
2005-08-11 18:02:09 +00:00
Daniel Stenberg
6508d446e1
Support realloc() on a NULL pointer properly (printf(%p) on a NULL pointer
...
outputs (nil) and not a 0x0 or similar.
2005-08-04 23:05:36 +00:00
Gisle Vanem
34a827bbfe
Needs 'struct_stat'. Increased verbosity.
2005-07-28 13:20:27 +00:00
Daniel Stenberg
465e19dbe9
Adrian Schuur added trailer support in the chunked encoding stream. The
...
trailer is then sent to the normal header callback/stream.
2005-07-12 18:15:34 +00:00
Daniel Stenberg
20005a83d2
Andrew Bushnell provided enough info for me to tell that we badly needed to
...
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
2005-07-03 22:25:15 +00:00
Daniel Stenberg
27926030f9
add more info when this script gets confused, and added getaddrinfo and
...
freeaddrinfo to the trace output
2005-06-30 14:07:52 +00:00
Daniel Stenberg
30c93d66eb
verify that the URL decoding is done properly too
2005-06-22 22:24:47 +00:00
Daniel Stenberg
3b60bb7259
David Shaw's fix that unifies proxy string treatment so that a proxy given
...
with CURLOPT_PROXY can use a http:// prefix and user + password. The user
and password fields are now also URL decoded properly.
Test case 264 added to verify.
2005-06-22 22:24:10 +00:00
Daniel Stenberg
29aafb9cea
Andres Garcia's text mode fix for the 'data' part
2005-06-03 14:06:03 +00:00
Daniel Stenberg
300b4a9158
Todd Kulesza reported a flaw in the proxy option, since a numerical IPv6
...
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
2005-05-31 13:03:26 +00:00
Daniel Stenberg
52071f3476
added keywords
2005-05-31 12:57:21 +00:00
Daniel Stenberg
a7846189cd
Eric Cooper reported about a problem with HTTP servers that responds with
...
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
2005-05-29 22:30:48 +00:00
Daniel Stenberg
e3a530eb61
Andrés García fixed a warning appearing on windows
2005-05-27 11:01:41 +00:00