1
0
mirror of https://github.com/moparisthebest/curl synced 2024-11-17 23:15:08 -05:00
Commit Graph

227 Commits

Author SHA1 Message Date
Yang Tse
4d3fb91fb4 test servers: build adjustment
Undefine CURL_HIDDEN_SYMBOLS libcurl private preprocessor macro that might
leak from lib/setup.h into source files where this should not be defined.
2012-04-10 17:32:06 +02:00
Daniel Stenberg
805788e043 SWS: refuse to serve CONNECT unless running as proxy 2012-03-22 00:12:37 +01:00
Yang Tse
2b9fafd622 sws.c: fix proxy mode secondary connection monitoring condition 2012-01-17 12:28:28 +01:00
Yang Tse
b15024be4d sws.c: improve proxy mode torture testing support - followup to 18c6c8a5 2012-01-16 19:01:35 +01:00
Yang Tse
18c6c8a5e7 sws.c: improve proxy mode torture testing support - followup to c731fc58 2012-01-16 12:30:03 +01:00
Yang Tse
c731fc58ea sws.c: improve proxy mode torture testing support - followup to d4bf87dc 2012-01-15 20:13:32 +01:00
Yang Tse
d4bf87dc0e sws.c: improve proxy mode torture testing support 2012-01-13 05:13:48 +01:00
Yang Tse
123c92c904 sws.c: replace sleep() usage with wait_ms() 2012-01-09 22:50:47 +01:00
Yang Tse
2705af6267 sws.c: some compiler warning fixes 2012-01-08 19:28:46 +01:00
Yang Tse
dd69a3e868 sws.c: 812fa73057 follow-up 2012-01-06 01:52:45 +01:00
Yang Tse
812fa73057 sws.c: some IPv6 proxy mode peparatory adjustments 2012-01-05 20:52:48 +01:00
Yang Tse
4bc6c1a026 sws.c: fix proxy mode segfault 2012-01-04 19:14:19 +01:00
Daniel Stenberg
82180643f4 test proxy supports CONNECT
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.

Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.

Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
2012-01-03 15:01:22 +01:00
Yang Tse
fd10c047df sws.c: HTTP and GOPHER test server-side connection closing adjustment
When, for a given test, server is instructed to close connection after
server reply we now wait a very small amount of time (50ms) before doing
so. This is done to allow client to, at least partially, read server
reply before getting an ECONNRESET.

The above is required to make test cases 1070, 1200, 1201 and 1202 pass
with Cygwin 1.5.X on W2K.

GOPHER test server closes connection after _every_ server-reply, as such,
at some point it could require a bigger time or using shutdown() before
a server-side initiated disconnection.
2011-10-14 17:33:05 +02:00
Daniel Stenberg
650a504b2f sws: don't enable pipelining for requests with content-length
Log texts also modified and some white space edits
2011-07-17 00:39:23 +02:00
Daniel Stenberg
c7a4df16e0 sws: allow multiple commands in <servercmd> 2011-07-03 19:15:06 +02:00
Yang Tse
34127c7adc sws: fix compier warning: external definition with no prior declaration 2010-12-06 14:51:44 +01:00
Yang Tse
07f60235b0 fix compiler warning: rounding, sign extension, or loss of accuracy may result 2010-12-02 18:46:13 +01:00
Yang Tse
5db0a412ff atoi: remove atoi usage 2010-11-28 23:11:14 +01:00
Yang Tse
a768e39b2d test servers: fix strict aliasing compiler warnings 2010-11-19 19:20:38 +01:00
Dan Fandrich
15622e69a9 sws: Added writedelay HTTP server command
This delays between write operations, hopefully making it easier
to spot problems where libcurl doesn't flush the socket properly
before waiting for the next response.
2010-10-02 00:21:59 +02:00
Daniel Stenberg
6ed72fd7fa sws: added basic gopher support 2010-08-25 14:21:25 +02:00
Daniel Stenberg
2309b4e330 remove the CVSish $Id$ lines 2010-03-24 11:02:54 +01:00
Yang Tse
439f62bfa8 convert Curl_ultous() and Curl_ultouc() functions to curlx_ultous() and
curlx_ultouc(), exposing them through curlx.h to allow proper code reuse
later in our test harness.
2010-02-22 18:56:29 +00:00
Yang Tse
048438345a fix compiler warning 2010-02-19 18:02:38 +00:00
Yang Tse
6e461e45c3 fix compiler warning 2010-02-18 12:31:24 +00:00
Yang Tse
f442dd6496 fix Content-Length validation 2010-02-16 11:17:00 +00:00
Yang Tse
d5b2d8e081 fix compiler warning: conversion from "long" to "size_t" may lose sign 2010-02-15 17:40:35 +00:00
Yang Tse
68d83a8142 Overhauled test suite getpart() function. Fixing potential out of bounds
stack and memory overwrites triggered with huge test case definitions.
2010-02-14 13:14:17 +00:00
Yang Tse
f47b84b57f Validate server port argument 2010-02-04 17:17:19 +00:00
Yang Tse
232d17ec64 avoid possibility of using obsoleted stuff 2010-02-02 12:39:10 +00:00
Yang Tse
a114b7b1c0 sws and tftpd command line option naming adjustments 2010-01-08 01:48:54 +00:00
Yang Tse
7bede9180d log a message when continuing once sleep time is over 2009-12-22 13:45:01 +00:00
Yang Tse
002ed5f298 Test harness process control enhancements 2009-12-16 19:55:35 +00:00
Yang Tse
364d76aca7 Fix compiler warnings 2009-12-14 13:27:50 +00:00
Yang Tse
6e9a484ea6 signal handling to cleanup on SIGINT and SIGTERM, followup 2009-12-13 03:45:32 +00:00
Yang Tse
0653fa107f signal handling to cleanup on SIGINT and SIGTERM, followup 2009-12-09 18:41:43 +00:00
Yang Tse
f07f17f2a4 Log sws IPv version, port and pid when exiting due to SIGINT or SIGTERM. 2009-11-27 12:01:25 +00:00
Yang Tse
cbd527843b Only attempt to clear the server-logs lock when previously set by this same server. 2009-11-26 10:15:08 +00:00
Yang Tse
fba233bb34 signal handling to cleanup on SIGINT and SIGTERM 2009-11-26 04:38:29 +00:00
Yang Tse
094afbeb56 Enhance some debug messages for initialization failures.
Fix compiler warning: conditional expression is constant.
2009-11-23 16:11:50 +00:00
Yang Tse
be5c815f63 remove line obsoleted with previous commit 2009-09-17 14:02:50 +00:00
Yang Tse
31e106ced2 Attempt to silence bogus compiler warning: "Potential null pointer dereference" 2009-09-17 11:45:27 +00:00
Gunter Knauf
f1320d6733 add cast to silent compiler warning with 64bit systems. 2009-08-29 15:44:31 +00:00
Yang Tse
c2ce2aa4de fix compiler warning 2009-06-12 09:01:41 +00:00
Yang Tse
3ca0b9bb47 fix compiler warning 2009-06-11 17:46:33 +00:00
Yang Tse
af41fb79b5 Include <arpa/inet.h> if HAVE_ARPA_INET_H is defined 2009-04-27 23:59:41 +00:00
Dan Fandrich
640974fb28 If a HTTP request is Basic and num is already >=1000, the HTTP test server
adds 1 to num to get the data section to return. This allows testing
authentication negotiations using the Basic authentication method.
2008-11-25 23:23:47 +00:00
Dan Fandrich
88513d2d1a Fixed some compiler warnings with gcc 2008-10-01 17:34:24 +00:00
Yang Tse
57ee847ce7 Avoid the use of the '? :' operator inside the call to our
test-server logging function. It doesn't work on some systems.
2008-09-26 11:21:22 +00:00
Yang Tse
985bd18904 attempt to avoid HTTP server startup misdetection on some systems 2008-09-26 01:08:24 +00:00
Yang Tse
b6f29bef06 fix compiler warning: defined but not used 2008-09-21 02:35:20 +00:00
Yang Tse
fe5f448015 fix compiler warning: external definition with no prior declaration 2008-09-20 12:33:02 +00:00
Yang Tse
a6c915aab9 fix compiler warning: external declaration in primary source file 2008-09-18 16:21:09 +00:00
Yang Tse
8733e087d7 fix print formatting string directives 2008-09-04 05:29:10 +00:00
Daniel Stenberg
c67a99ff27 - When libcurl was doing a HTTP POST and the server would respond with
"Connection: close" and actually close the connection after the
  response-body, libcurl could still have outstanding data to send and it
  would not properly notice this and stop sending. This caused weirdness and
  sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222

  Note that there are still reasons to consider libcurl's behavior when
  getting a >= 400 response code while sending data, as Craig Perras' note
  "http upload: how to stop on error" specifies:
  http://curl.haxx.se/mail/archive-2008-08/0138.html
2008-08-29 10:47:59 +00:00
Dan Fandrich
1f26ea4a85 Added test case 1051 to test Location: following with PUT, as reported
by Ben Sutcliffe.  The test when run manually shows a problem in curl,
but the test harness web server doesn't run the test correctly so it's
disabled for now.
2008-07-30 07:24:59 +00:00
Yang Tse
96edebf4d9 improve synchronization between test harness runtests.pl script
and test harness servers to minimize risk of false test failures.

http://curl.haxx.se/mail/lib-2008-04/0392.html
2008-04-23 23:55:34 +00:00
Yang Tse
ad1dd08693 fix minor memory leak triggered upon test failure 2008-04-22 13:07:27 +00:00
Yang Tse
95fd093c4a Remove fflush() + fsync() previously introduced accelerated writing of
server input and response request files of the test harness sws server.

Reintroduce, for test # 1001, the <postcheck> small delay. The delay is
needed even with the accelerated writing of server input and response
request files in test harness sws server.

http://curl.haxx.se/mail/lib-2008-04/0385.html
2008-04-22 12:40:05 +00:00
Yang Tse
a87c468c5c accelerate the writing of server input and response request files
to disk, trying to defeat file and disk write-behind algorithms
2008-04-20 19:15:08 +00:00
Yang Tse
ed63d9d4de header inclusion cleanup 2008-02-28 00:55:06 +00:00
Yang Tse
0d09f342c4 refactor some code out to write_pidfile() in util.c 2008-02-26 15:06:44 +00:00
Yang Tse
fecb67b246 Use a long int data type to handle getpid() result 2008-02-06 16:54:01 +00:00
Yang Tse
2c0956200f Fix buffer size specification.
Improve handling of boundary conditions for huge requests.
2008-02-05 18:37:53 +00:00
Yang Tse
acd9d72466 Minor variable type cleanups.
Disable "swsbounce" mode when the received request
isn't for the same test and part number.
2008-02-05 14:43:16 +00:00
Yang Tse
cd63a461d7 proper initialization of httprequest, no longer zeroing out twice
the whole 150000+ bytes struct, and also removing an equally big
additional buffer for pipelining treatment.
2008-02-05 02:21:38 +00:00
Yang Tse
69e540dfa6 improve request initialization for test harness HTTP server 2008-01-25 05:08:53 +00:00
Yang Tse
2198869eb1 Dmitry Kurochkin's test harness HTTP server pipelining fix fot test 530 2008-01-25 05:07:04 +00:00
Yang Tse
1d49c04545 Detect, log and avoid storing a request with a negative size. 2007-10-26 00:36:36 +00:00
Patrick Monnerat
0678a51d3b Allow test server to handle binary POSTs.
Tests 35, 544 545 added: binary data POSTs.
2007-10-25 19:40:05 +00:00
Yang Tse
54bcde0a14 also log error message string 2007-10-09 23:24:28 +00:00
Yang Tse
06be8bc389 On error, close "log/server.response" 2007-10-04 02:09:33 +00:00
Yang Tse
0ac5fd354b If TCP_NODELAY is not defined we can't disable the Nagle algorithm 2007-10-03 23:38:07 +00:00
Daniel Stenberg
8d1239c091 Disable the Nagle algorithm and send back responses in small chunks in an
attempt to force smaller bits to get read by clients.
2007-10-02 10:13:37 +00:00
Yang Tse
f2cd2882a0 Oops missing var 2007-02-19 03:59:41 +00:00
Yang Tse
31e598d2f3 add debug messages for initialization failures 2007-02-19 02:03:58 +00:00
Yang Tse
4894ce16fc use macros ERRNO, SET_ERRNO(), SOCKERRNO and SET_SOCKERRNO() for errno handling 2007-02-16 16:01:19 +00:00
Yang Tse
5a267c4312 compiler warning fix 2007-02-14 13:46:08 +00:00
Yang Tse
7033a1c072 enhance HTTP server request input writing,
retrying upon EINTR errors.
2007-02-14 00:28:01 +00:00
Daniel Stenberg
da58d03ff7 Venkat Akella found out that libcurl did not like HTTP responses that simply
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.

To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
2006-11-25 13:32:04 +00:00
Daniel Stenberg
e264f699d4 Tor Arntsen spotted this mistake 2006-11-13 13:48:55 +00:00
Yang Tse
13e60c55a1 Avoid trying to compare more than strlen bytes. 2006-10-23 19:16:19 +00:00
Yang Tse
4ec9316155 Replace is*() macros with our own IS*() ones. 2006-10-23 19:14:54 +00:00
Yang Tse
e150150d9f Remove redundant __CYGWIN__ symbol check 2006-10-11 16:01:16 +00:00
Yang Tse
5a6c89661a Cygwin preprocessor adjustments 2006-09-12 01:17:16 +00:00
Daniel Stenberg
e3c15fc4b9 test 530 is the first ever HTTP pipelining test for libcurl 2006-09-08 11:56:56 +00:00
Yang Tse
ee3514ccdc Replace exit() with return() in main() 2006-08-14 17:00:08 +00:00
Yang Tse
46c5e562bf Abort if unable to write pid file. 2006-07-19 15:26:28 +00:00
Yang Tse
42f5a90d09 -Use curl_socket_t instead of int.
-Log errno in message if setsockopt() fails.

-Close listener socket on major errors.
2006-07-17 22:44:40 +00:00
Yang Tse
95aecc5dbb Fix compiler warning: comparison between signed and unsigned 2006-07-12 09:03:48 +00:00
Yang Tse
8272874704 Place parenthesis surrounding macro parameters so that the use of sread and swrite is more intuitive. 2006-07-12 06:52:40 +00:00
Yang Tse
88a1a10e6f Pay attention when typecasting an operation 2006-07-12 06:09:53 +00:00
Yang Tse
624e657210 sread now returns ssize_t 2006-07-12 05:54:06 +00:00
Yang Tse
58176d1484 Use platform's native types for recv() and send() arguments. 2006-07-12 05:19:00 +00:00
Daniel Stenberg
00312e95fe removed variable declarations shadowing previously declared variables 2006-05-10 09:53:52 +00:00
Daniel Stenberg
e5babd086d if configure found a fork(), sws supports --fork which is *NOT* used by the
ordinary test suite. Also removed the perror() calls and instead made the
logging output the errno code to ease error tracking using logs.
2006-04-10 13:11:52 +00:00
Gisle Vanem
f592ea6c30 Fix typo. 2006-02-25 18:57:20 +00:00
Daniel Stenberg
10beb36b1c Ulf Härnhammar fixed a format string (printf style) problem in the Negotiate
code. It should however not be the cause of any troubles. He also fixed a
few similar problems in the HTTP test server code.
2006-02-18 22:27:01 +00:00
Daniel Stenberg
bda1e9aeab Made the copyright year match the latest modification's year. 2006-01-09 13:17:14 +00:00