Verify that the "Saved to filename 'blabla'" message is only displayed when
the 'blabla' filename being used _actually_ has been specified by the server
in the Content-Disposition header.
Use relative path for unintended file creation postcheck.
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further
pop3 test server expansion for tests that require CAPA or AUTH support,
although this will need some extra work to make it fully functional.
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
The line endings broke when I saved the three recent patches (my fault,
not Colin's) to 'git am' them.
Adjusted the stripping of the test program for comparing to also exclude
the SSH key file name as that will differ and use a local path name.
With commit 035ef06bda applied, the test pop3 server needs to send
".\r\n" as the body terminating sequence and there needs to be a final
CRLF in the actual body in the test data file.
The proxy parser function strips off trailing slashes off the proxy name
which could lead to a mistaken zero length proxy name which would be
treated as no proxy at all by subsequent functions!
This is now detected and an error is returned. Verified by the new test
1329.
Reported by: Chandrakant Bagul
Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly
clear it.
Verified with the new test 598
Bug: http://curl.haxx.se/bug/view.cgi?id=3481551
Reported by: Michael Day
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.
Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.
Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Keep track of which sockets that are the result of accept() calls and
refuse to call the closesocket callback for those sockets. Test case 596
now verifies that the open socket callback is called the same number of
times as the closed socket callback for active FTP connections.
Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html
Reported by: Gokhan Sengun
When the new socket is created for an active connection, it is now done
using the open socket callback.
Test case 596 was modified to run fine, although it hides the fact that
the close callback is still called too many times, as it also gets
called for closing sockets that were created with accept().
Curl_pop3_write() now has a state machine that scans for the end of a
POP3 body so that the CR LF '.' CR LF sequence can come in everything
from one up to five subsequent packets.
Test case 810 is modified to use SLOWDOWN which makes the server pause
between each single byte and thus makes the POP3 body get sent to curl
basically one byte at a time.
"Active FTP hangs if server does not open data connection"
The server first sends a 150 and then when libcurl waits for the data
transfer, the server sends a 425.
The protocol parts for these tests do not include QUIT simply because
the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout
error without specificly saying for which connection it concerns, and
for timeouts libcurl marks the control channel as "invalid". As this
test case times out for the data connection it could still use the
control channel.
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
591 -> FTP multi PORT and 425 on upload
592 -> FTP multi PORT and 421 on upload
593 -> FTP multi PORT upload, no data conn and no transient neg. reply
594 -> FTP multi PORT upload, no data conn and no positive prelim. reply
1206 -> FTP PORT and 425 on download
1207 -> FTP PORT and 421 on download
1208 -> FTP PORT download, no data conn and no transient negative reply
1209 -> FTP PORT download, no data conn and no positive preliminary reply
This test is created to verify Rene Bernhardt's patch which makes sure
libcurl properly _not_ deals with Negotiate if not asked to even if the
proxy says it can serve it.
EPRT is now supported by default by the server. To disable it, use the
generic REPLY instruction in the <servercmd> tag. Test 116 now has it
disabled. All other existing active FTP port tests strip out the port
commands from the logs already so the change of the server isn't that
noticable.
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
The fix is pretty much the one Nick Zitzmann provided, just edited to do
the right indent levels and with test case 1204 added to verify the fix.
Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html
Reported by: Nick Zitzmann
When doing a multipart formpost with a read callback, and that callback
returns CURL_READFUNC_ABORT, that return code must be properly
propagated back and handled accordingly. Previously it would be handled
as a zero byte read which would cause a hang!
Added test case 587 to verify. It uses the lib554.c source code with a
small ifdef.
Reported by: Anton Bychkov
Bug: http://curl.haxx.se/mail/lib-2011-10/0097.html
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
Two problems were fixed:
GET_PARAMETER responses that have no body must be 204 response or
properly set length to 0.
One of the <data> sections had the wrong content-length for its
GET_PARAMETER response.
Enabled test 572 again.
There are two keywords in cookie headers that don't follow the regular
name=value style: secure and httponly. Still we must support that they
are written like 'secure=' and then treat them as if they were written
'secure'. Test case 31 was much extended by Rob Ward to test this.
Bug: http://curl.haxx.se/bug/view.cgi?id=3349227
Reported by: "gnombat"
A regression where CURLFORM_BUFFER stopped to properly insert the file
name part in the formpart. Bug introduced in commit f851f76857.
Added CURLFORM_BUFFER use to test 554 to verify this.
Bug: http://curl.haxx.se/mail/lib-2011-07/0176.html
Reported by: Henry Ludemann
Content-disposition headers can provide file names with semicolons which
previously would be cut off at that point.
Added test case 1311 and 1312 to verify -J.
Bug: http://curl.haxx.se/bug/view.cgi?id=3375603
Reported by: Peter Hjalmarsson
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE
for Samba's winbind daemon ntlm_auth helper code implementation and filename.
Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature
availability implementation independent.
For test harness, prefix NTLM_AUTH environment vars with CURL_
Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
