would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
while not fixing things very nicely, it does make the SOCKS5 proxy
connection slightly better as it now acknowledges the timeout for connection
and it no longer segfaults in the case when SOCKS requires authentication
and you did not specify username:password.
send the whole request at once, even though the Expect: header was disabled
by the application. An effect of this change is also that small (< 1024
bytes) POSTs are now always sent without Expect: header since we deem it
more costly to bother about that than the risk that we send the data in
vain.
CURLOPT_NOBODY is set true. PREQUOTE is then run roughly at the same place
in the command sequence as it would have run if there would've been a
transfer.
we did wrong and patched it: When nodes were removed from the splay tree,
and we didn't properly remove it from the splay tree when an easy handle was
removed from a multi stack and thus we could wrongly leave a node in the
splay tree pointing to (bad) memory.
the crash was that libcurl internally was a bit confused about who owned the
DNS cache at all times so if you created an easy handle that uses a shared
DNS cache and added that to a multi handle it would crash. Now we keep more
careful internal track of exactly what kind of DNS cache each easy handle
uses: None, Private (allocated for and used only by this single handle),
Shared (points to a cache held by a shared object), Global (points to the
global cache) or Multi (points to the cache within the multi handle that is
automatically shared between all easy handles that are added with private
caches).
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
autotools project, which optionally (default=yes) uses libcurl on a system
without a (usable) libcurl installation, but not specifying
`--without-libcurl', configure determines correctly that no libcurl is
available, however, the LIBCURL variable gets expanded to `LIBCURL = -lcurl'
in the resulting Makefiles.
David Shaw fixed the flaw.
multi stack and that easy handle had already been used to do one or more
easy interface transfers, as then the code threw away the previously used
DNS cache without properly freeing it.
(http://curl.haxx.se/bug/view.cgi?id=1481217), with follow-ups by Michele Bini
and David Byron. libcurl previously wrongly used GetLastError() on windows to
get error details after socket-related function calls, when it really should
use WSAGetLastError() instead.
When changing to this, the former function Curl_ourerrno() is now instead
called Curl_sockerrno() as it is necessary to only use it to get errno from
socket-related functions as otherwise it won't work as intended on Windows.
(http://curl.haxx.se/bug/view.cgi?id=1480821) He found and identified a
problem with how libcurl dealt with GnuTLS and a case where gnutls returned
GNUTLS_E_AGAIN indicating it would block. It would then return an unexpected
return code, making Curl_ssl_send() confuse the upper layer - causing random
28 bytes trash data to get inserted in the transfered stream.
The proper fix was to make the Curl_gtls_send() function return the proper
return codes that the callers would expect. The Curl_ossl_send() function
already did this.
(http://curl.haxx.se/mail/lib-2006-02/0154.html) by adding the NTLM hash
function in addition to the LM one and making some other adjustments in the
order the different parts of the data block are sent in the Type-2 reply.
Inspiration for this work was taken from the Firefox NTLM implementation.
I edited the existing 21(!) NTLM test cases to run fine with these news. Due
to the fact that we now properly include the host name in the Type-2 message
the test cases now only compare parts of that chunk.
--enable-debug, as then curl used free() on memory allocated both with
normal malloc() and with libcurl-provided functions, when the latter MUST be
freed with curl_free() in debug builds.
with the multi interface and multi-part formposts. The fix from February
22nd could make the Curl_done() function get called twice on the same
connection and it was not designed for that and thus tried to call free() on
an already freed memory area!
callback" error message so I've now made the setting of that callback not be
as critical as before. The function is only used for additional loggging/
trace anyway so a failure just means slightly less data. It should still be
able to proceed and connect fine to the server.
(http://curl.haxx.se/bug/view.cgi?id=1431750) helped me identify and fix two
different but related bugs:
1) Removing an easy handle from a multi handle before the transfer is done
could leave a connection in the connection cache for that handle that is
in a state that isn't suitable for re-use. A subsequent re-use could then
read from a NULL pointer and segfault.
2) When an easy handle was removed from the multi handle, there could be an
outstanding c-ares DNS name resolve request. When the response arrived,
it caused havoc since the connection struct it "belonged" to could've
been freed already.
Now Curl_done() is called when an easy handle is removed from a multi handle
pre-maturely (that is, before the transfer was complteted). Curl_done() also
makes sure to cancel all (if any) outstanding c-ares requests.
type to the already provided type CURLPROXY_SOCKS4.
I added a --socks4 option that works like the current --socks5 option but
instead use the socks4 protocol.
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
with re-used FTP connections. If the second request on the same connection was
set not to fetch a "body", libcurl could get confused and consider it an
attempt to use a dead connection and would go acting mighty strange.
curl tool with --local-port. Plain and simply set the range of ports to bind
the local end of connections to. Implemented on to popular demand.
Not extensively tested. Please let me know how it works.
connection setup as a follow-redirect. It turns out 1) this fails when a FTP
connection is re-setup and 2) it does make the max-redirs counter behave
wrong. This fix was not verified since the reporter vanished, but I believe
this is the right fix nonetheless.
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
into a counter, and thus you can now do multiple curl_global_init() and you
are then supposed to do the same amount of calls to curl_global_cleanup().
Bryan also updated the docs accordingly.
given subdirs, libcurl would still "remember" the full path as if it is the
current directory libcurl is in so that the next curl_easy_perform() would
get really confused if it tried the same path again - as it would not issue
any CWD commands at all, assuming it is already in the "proper" dir.
Starting now, a failed CWD command sets a flag that prevents the path to be
"remembered" after returning.
http://www.greenend.org.uk/rjk/2001/06/poll.html and further tests by Eugene
Kotlyarov, we now know that cygwin's poll returns only POLLHUP on remote
connection closure so we check for that case (too) and re-enable poll for
cygwin builds.
version of libcurl with different Windows versions. Current version of
libcurl imports SSPI functions from secur32.dll. However, under Windows NT
4.0 these functions are located in security.dll, under Windows 9x - in
secur32.dll and Windows 2000 and XP contains both these DLLs (security.dll
just forwards calls to secur32.dll).
Dmitry's patch loads proper library dynamically depending on Windows
version. Function InitSecurityInterface() is used to obtain pointers to all
of SSPI function in one structure.
: ----------------------------------------------------------------------
The LDAP code in libcurl can't handle LDAP servers of LDAPv3 nor binary
attributes in LDAP objects. So, I made a quick patch to address these
problems.
The solution is simple: if we connect to an LDAP server, first try LDAPv3
(which is the preferred protocol as of now) and then fall back to LDAPv2.
In case of binary attributes, we first convert them to base64, just like the
openldap client does. It uses ldap_get_values_len() instead of
ldap_get_values() to be able to retrieve binary attributes correctly. I
defined the necessary LDAP macros in lib/ldap.c to be able to compile
libcurl without the presence of libldap
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(http://curl.haxx.se/bug/view.cgi?id=1337723) that curl could not upload
binary data from stdin on Windows if the data contained control-Z (hex 1a)
since that is treated as end-of-file when read in text mode. Gisle Vanem
pointed out the fix, and I made both -T and --data-binary take advantage of
it.
in the man page, curl would send an invalid HTTP Range: header. The correct
way would be to use "-r [number]-" or even "-r -[number]". Starting now,
curl will warn if this is discovered, and automatically append a dash to the
range before passing it to libcurl.
#1334338 (http://curl.haxx.se/bug/view.cgi?id=1334338). When reading an SSL
stream from a server and the server requests a "rehandshake", the current
code simply returns this as an error. I have no good way to test this, but
I've added a crude attempt of dealing with this situation slightly better -
it makes a blocking handshake if this happens. Done like this because fixing
this the "proper" way (that would handshake asynchronously) will require
quite some work and I really need a good way to test this to do such a
change.
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
reported, the define is used by the configure script and is assumed to use
the 0xYYXXZZ format. This made "curl-config --vernum" fail in the 7.15.0
release version.
(http://curl.haxx.se/bug/view.cgi?id=1299181) that identified a silly problem
with Content-Range: headers with the 'bytes' keyword written in a different
case than all lowercase! It would cause a segfault!
for Windows, that could lead to an Access Violation when the multi interface
was used due to an issue with how the resolver thread was and was not
terminated.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
that made curl run fine in his end. The key was to make sure we do the
SSL/TLS negotiation immediately after the TCP connect is done and not after
a few other commands have been sent like we did previously. I don't consider
this change necessary to obey the standards, I think this server is pickier
than what the specs allow it to be, but I can't see how this modified
libcurl code can add any problems to those who are interpreting the
standards more liberally.
CURLOPT_COOKIEFILE), add a cookie (with CURLOPT_COOKIELIST), tell it to
write the result to a given cookie jar and then never actually call
curl_easy_perform() - the given file(s) to read was never read but the
output file was written and thus it caused a "funny" result.
- While doing some tests for the bug above, I noticed that Firefox generates
large numbers (for the expire time) in the cookies.txt file and libcurl
didn't treat them properly. Now it does.
zone name of a daylight savings time was used. For example, PDT vs PDS. This
flaw was introduced with the new date parser (11 sep 2004 - 7.12.2).
Fortunately, no web server or cookie string etc should be using such time
zone names thus limiting the effect of this bug.
HTTP proxy if an FTP URL was given. libcurl now properly switches to pure HTTP
internally when an HTTP proxy is used, even for FTP URLs. The problem would
also occur with other multi-pass auth methods.
seems the Windows (MSVC) libc time functions may return data one hour off if
TZ is not set and automatic DST adjustment is enabled. This made
curl_getdate() return wrong value, and it also concerned internal cookie
expirations etc.
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
1) findtool does look per tool in PATH and think ./perl is the perl
executable, while is just a local directory (I have . in the PATH)
2) I got several warning for head -1 deprecated in favour of head -n 1
3) ares directory is missing some file (missing is missing :-) ) because
automake and friends is not run.
(Let's hope number 2 doesn't break somewhere "out there", if so we can always
search/replace that back.)
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
times, like on my HP-UX 10.20 tests. And then lib/strerror.c badly assumed
the glibc version if the posix define wasn't set (since it _had_ found a
strerror_r).
least it should no longer cause a compiler error. However, it does not have
AI_NUMERICHOST so we cannot getaddrinfo() any numerical addresses with it (we
use that for FTP PORT/EPRT)! So, I modified the configure check that checks if
the getaddrinfo() is working, to use AI_NUMERICHOST since then it'll fail on
AIX 4.3 and it will automatically build with IPv6 support disabled.
--trace, --trace-ascii and --verbose output. I also made the '>' display
separate each line on the linefeed so that HTTP requests etc look nicer in the
-v output.
