something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.
To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
(http://curl.haxx.se/bug/view.cgi?id=1561470) that is said to crash when an
FTP upload fails with the multi interface. It did not, but I made a failed
upload still assume the control connection to be fine.
send the whole request at once, even though the Expect: header was disabled
by the application. An effect of this change is also that small (< 1024
bytes) POSTs are now always sent without Expect: header since we deem it
more costly to bother about that than the risk that we send the data in
vain.
2 - store the time it took to verify it and allow that time to be used as
%FTPTIME[23] in command lines to allow us to adjust better to slow hosts
since test 190 failed on my slow solaris machine just because it hadn't
gotten time to run all the way the test assumed all machines would reach
before the time-out elapsed.
(http://curl.haxx.se/mail/lib-2006-02/0154.html) by adding the NTLM hash
function in addition to the LM one and making some other adjustments in the
order the different parts of the data block are sent in the Type-2 reply.
Inspiration for this work was taken from the Firefox NTLM implementation.
I edited the existing 21(!) NTLM test cases to run fine with these news. Due
to the fact that we now properly include the host name in the Type-2 message
the test cases now only compare parts of that chunk.
even after EPSV returned a positive response code, if libcurl failed to
connect to the port number the EPSV response said. Obviously some people are
going through protocol-sensitive firewalls (or similar) that don't understand
EPSV and then they don't allow the second connection unless PASV was
used. This also called for a minor fix of test case 238.
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
with CURLOPT_PROXY can use a http:// prefix and user + password. The user
and password fields are now also URL decoded properly.
Test case 264 added to verify.
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
A) Normal non-proxy HTTP:
- no more "Pragma: no-cache" (this only makes sense to proxies)
B) Non-CONNECT HTTP request over proxy:
- "Pragma: no-cache" is used (like before)
- "Proxy-Connection: Keep-alive" (for older style 1.0-proxies)
C) CONNECT HTTP request over proxy:
- "Host: [name]:[port]"
- "Proxy-Connection: Keep-alive"
.netrc, and when following a Location: the subsequent requests didn't properly
use the auth as found in the netrc file. Added test case 257 to verify my fix.
level stuff. The FTP server communicates with sockfilt using perl's open2().
This enables easier IPv6 support and hopefully FTP-SSL support in the future.
Added four test cases for FTP-ipv6.
also affecting NTLM and Negotiate.) It turned out that if the server responded
with 100 Continue before the initial 401 response, libcurl didn't take care of
the response properly. Test case 245 and 246 added to verify this.
function was fixed to use the proper proxy authentication when multiple ones
were added as accepted. test 239 and test 243 were added to repeat the
problems and verify the fixes.
on a host with a buggy resolver that strips all but the bottom 8 bits of
each octet. The resolved address in this case (192.0.2.127) is guaranteed
never to belong to a real host (see RFC3330).
file got a Last-Modified: header written to the data stream, corrupting the
actual data. This was because some conditions from the previous FTP code was
not properly brought into the new FTP code. I fixed and I added test case 520
to verify. (This bug was introduced in 7.13.1)
on the remote side. This then converts the operation to an ordinary STOR
upload. This was requested/pointed out by Ignacio Vazquez-Abrams.
It also proved (and I fixed) a bug in the newly rewritten ftp code (and
present in the 7.13.1 release) when trying to resume an upload and the servers
returns an error to the SIZE command. libcurl then loops and sends SIZE
commands infinitely.
requested data from a host and then followed a redirect to another
host. libcurl then didn't use the proxy-auth properly in the second request,
due to the host-only check for original host name wrongly being extended to
the proxy auth as well. Added test case 233 to verify the flaw and that the
fix removed the problem.
present in RFC959... so now (lib)curl supports it as well. --ftp-account and
CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an account
string after PASS have been sent away. The client responds with "ACCT [account
string]".) Added test case 228 and 229 to verify the functionality. Updated
the test FTP server to support ACCT somewhat.
contains %0a or %0d in the user, password or CWD parts. (A future fix would
include doing it for %00 as well - see KNOWN_BUGS for details.) Test case 225
and 226 were added to verify this
If EPSV, EPRT or LPRT is tried and doesn't work, it will not be retried on
the same server again even if a following request is made using a persistent
connection.
If a second request is made to a server, requesting a file from the same
directory as the previous request operated on, libcurl will no longer make
that long series of CWD commands just to end up on the same spot. Note that
this is only for *exactly* the same dir. There is still room for improvements
to optimize the CWD-sending when the dirs are only slightly different.
Added test 210, 211 and 212 to verify these changes. Had to improve the
test script too and added a new primitive to the test file format.
file that was already completely downloaded caused an error, while it
doesn't if you don't use --fail! I added test case 194 to verify the fix.
Grrr. CURLOPT_FAILONERROR is now added to the list stuff to remove in
libcurl v8 due to all the kludges needed to support it.
