- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
Fixed two return code mixups. CURLE_UNKNOWN_OPTION is saved for when the
option is, yeah, not known. Clarified this in the setopt man page too.
Closes#5993
Since HTTPS is "the new normal", this update changes a lot of man page
examples to use https://example.com instead of the previous "http://..."
Closes#5969
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes#3653Closes#3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed#3653Closes#3790
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes#3350
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes#2435
Reported-by: zzq1015 on github
Closes#2607
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
Daniel Stenberg