When the application just started the transfer and then stops it while
the name resolve in the background thread hasn't completed, we need to
wait for the resolve to complete and then cleanup data accordingly.
Enabled test 1553 again and added test 1590 to also check when the host
name resolves successfully.
Detected by OSS-fuzz.
Closes#1968
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
Since 467da3af0, lib1521.c is generated instead of checked in. According
to the commit message, the intention was to remove it from the tarball
as well. However, it is still present when running make dist. To remove
it, add it to nodist_lib1521_SOURCES. This also means there is no need
for the manually added dist-rule in the Makefile.
Also update CMakelists.txt to handle the fact that we now may have
nodist_SOURCES.
If configure detects fnmatch to be available, use that instead of our
custom one for FTP wildcard pattern matching. For standard compliance,
to reduce our footprint and to use already well tested and well
exercised code.
A POSIX fnmatch behaves slightly different than the internal function
for a few test patterns currently and the macOS one yet slightly
different. Test case 1307 is adjusted for these differences.
Closes#2626
A non-escaped bracket ([) is for a character group - as documented. It
will *not* match an individual bracket anymore. Test case 1307 updated
accordingly to match.
Problem detected by OSS-Fuzz, although this fix is probably not a final
fix for the notorious timeout issues.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8525Closes#2614
This avoids appending error data to already existing good data.
Test 92 is updated to match this change.
New test 1156 checks all combinations of --range/--resume, --fail,
Content-Range header and http status code 200/416.
Fixes#1163
Reported-By: Ithubg on github
Closes#2578
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
The previous limit of 5 can still end up in situation that takes a very
long time and consumes a lot of CPU.
If there is still a rare use case for this, a user can provide their own
fnmatch callback for a version that allows a larger set of wildcards.
This commit was triggered by yet another OSS-Fuzz timeout due to this.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8369Closes#2587
Provide a set of new timers that return the time intervals using integer
number of microseconds instead of floats.
The new info names are as following:
CURLINFO_APPCONNECT_TIME_T
CURLINFO_CONNECT_TIME_T
CURLINFO_NAMELOOKUP_TIME_T
CURLINFO_PRETRANSFER_TIME_T
CURLINFO_REDIRECT_TIME_T
CURLINFO_STARTTRANSFER_TIME_T
CURLINFO_TOTAL_TIME_T
Closes#2495
RFC 6265 section 4.2.1 does not set restrictions on cookie names.
This is a follow-up to commit 7f7fcd0.
Also explicitly check proper syntax of cookie name/value pair.
New test 1155 checks that cookie names are not reserved words.
Reported-By: anshnd at github
Fixes#2564Closes#2566
... and make test 1026 rely on that feature so that --disable-manual
builds don't cause test failures.
Reported-by: Max Dymond and Anders Roxell
Fixes#2533Closes#2540
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
unit1309 and vtls/gtls: error: arithmetic on a null pointer treated as a
cast from integer to pointer is a GNU extension
Reported-by: Rikard Falkeborn
Fixes#2466Closes#2468
curl 7.57.0 and up interpret this according to Appendix E.3.2 of RFC
8089 but then returns an error saying this is unimplemented. This is
actually a regression in behavior on both Windows and Unix.
Before curl 7.57.0 this URL was treated as a path of "//foo/bar" and
then passed to the relevant OS API. This means that the behavior of this
case is actually OS dependent.
The Unix path resolution rules say that the OS must handle swallowing
the extra "/" and so this path is the same as "/foo/bar"
The Windows path resolution rules say that this is a UNC path and
automatically handles the SMB access for the program. So curl on Windows
was already doing Appendix E.3.2 without any special code in curl.
Regression
Closes#2438
This fixes a segfault occurring when a name of the (invalid) form "domain..tld"
is processed.
test46 updated to cover this case.
Follow-up to commit c990ead.
Ref: https://github.com/curl/curl/pull/2440
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
Detected by Coverity Analysis:
Error: IDENTIFIER_TYPO:
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:229: identifier_typo: Using "SuportedMech" appears to be a typo:
* Identifier "SuportedMech" is only known to be referenced here, or in copies of this code.
* Identifier "SupportedMech" is referenced elsewhere at least 4 times.
curl-7.58.0/tests/python_dependencies/impacket/smbserver.py:2651: identifier_use: Example 1: Using identifier "SupportedMech".
curl-7.58.0/tests/python_dependencies/impacket/smbserver.py:2308: identifier_use: Example 2: Using identifier "SupportedMech".
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:252: identifier_use: Example 3: Using identifier "SupportedMech" (2 total uses in this function).
curl-7.58.0/tests/python_dependencies/impacket/spnego.py:229: remediation: Should identifier "SuportedMech" be replaced by "SupportedMech"?
Closes#2379
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Test 319 checks proper raw mode data with non-chunked gzip
transfer-encoded server data.
Test 326 checks raw mode with chunked server data.
Bug: #2303Closes#2308
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
Whenever an expected pattern syntax rule cannot be matched, the
character starting the rule loses its special meaning and the parsing
is resumed:
- backslash at the end of pattern string matches itself.
- Error in [:keyword:] results in set containing :\[dekorwy.
Unit test 1307 updated for this new situation.
Closes#2273
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
If CURL_DOES_CONVERSION is enabled, uploaded LFs are mapped to CRLFs,
giving a result that is different from what is expected.
This commit avoids using CURLOPT_TRANSFERTEXT and directly encodes data
to upload in ascii.
Bug: https://github.com/curl/curl/pull/1872
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
Get screen width from the environment variable COLUMNS first, if set. If
not, use ioctl(). If nether works, assume 79.
Closes#2242
The "refresh" is for the -# output when no total transfer size is
known. It will now only use a single updated line even for this case:
The "-=O=-" ship moves when data is transferred. The four flying
"hashes" move (on a sine wave) on each refresh, independent of data.
vtls.c:multissl_init() might do a curl_free() call so strip that out to
make this work with more builds. We just want to verify that
memorytracking works so skipping one line is no harm.
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
- When zlib version is < 1.2.0.4, process gzip trailer before considering
extra data as an error.
- Inflate with Z_BLOCK instead of Z_SYNC_FLUSH to maximize correct data
and minimize corrupt data output.
- Do not try to restart deflate decompression in raw mode if output has
started or if the leading data is not available anymore.
- New test 232 checks inflating raw-deflated content.
Closes#2068
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
For pop3/imap/smtp, added test 891 to somewhat verify the pop3
case.
For this, I enhanced the pingpong test server to be able to send back
responses with LF-only instead of always using CRLF.
Closes#2150
This SFTP test fails with libssh back-end due to failure to verify
the peer. Disable peer verification in the test as there seems to
be the intention of the test.
Note that the libssh back-end automatically verifies the peer's
host using the default known_hosts file.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Host names like "127.0.0.1 moo" would otherwise be accepted by some
getaddrinfo() implementations.
Updated test 1034 and 1035 accordingly.
Fixes#2073Closes#2092
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
... which is valid according to documentation. Regression since
f121575c0b.
Verified now in test 501.
Reported-by: cbartl on github
Fixes#2038Closes#2039
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
This reverts commit f3e03f6c0a.
Caused memory leaks in the fuzzer, needs to be done differently.
Disable test 1553 for now too, as it causes memory leaks without this
commit!
When imap_done() got called before a connection is setup, it would try
to "finish up" and dereffed a NULL pointer.
Test case 1553 managed to reproduce. I had to actually use a host name
to try to resolve to slow it down, as using the normal local server IP
will make libcurl get a connection in the first curl_multi_perform()
loop and then the bug doesn't trigger.
Fixes#1953
Assisted-by: Max Dymond
... fixes a memory leak with at least IMAP when remove_handle is never
called and the transfer is abruptly just abandoned early.
Test 1552 added to verify
Detected by OSS-fuzz
Assisted-by: Max Dymond
Closes#1954
... a single double quote could leave the entry path buffer without a zero
terminating byte. CVE-2017-1000254
Test 1152 added to verify.
Reported-by: Max Dymond
Bug: https://curl.haxx.se/docs/adv_20171004.html
