This fixes the error: 'for' loop initial declaration used outside C99
mode by declaring the loop increment variable in the beginning of the
block instead of inside the for loop.
Fixes#5254
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
FTP, IMAP, POP3, SMTP and their IPv6 versions are now all on dynamic
ports
Test 842-845 are unfortunately a bit hard to move over to this concept
right now and require "default port" still...
The runtests script now always performs variable replacement on the
entire test source file before the test gets executed, and saves the
updated version in a temporary file (log/test[num]) so that all test
case readers/servers can use that version (if present) and thus enjoy
the powers of test case variable substitution.
This is necessary to allow complete port number freedom.
Test 309 is updated to work with a non-fixed port number thanks to this.
Since the Windows versions of both programs would write Windows
PIDs to their pidfiles which we cannot handle, we need to use
our known perl.exe Cygwin/msys PID together with exec() in order
to tie the spawned processes to the existance of our perl.exe
The perl.exe that is executing secureserver.pl and sshserver.pl
has a Cygwin/msys PID, because it is started inside Cygwin/msys.
Related to #5188
- Ignore intermediate progress updates.
- Support locales that use a character other than period as decimal
separator (eg 100,0%).
test1148 checks that the progress finishes at 100% and has the right
bar width. Prior to this change the test assumed that the only progress
reported for such a quick transfer was 100%, however in rare instances
(like in the CI where transfer time can slow considerably) there may be
intermediate updates. For example, below is stderrlog1148 from a failed
CI run with explicit \r and \n added (it is one line; broken up so that
it's easier to understand).
\r
\r################################## 48.3%
\r######################################################################## 100.0%
\n
Closes https://github.com/curl/curl/pull/5194
With this bit set, my mac successfully resolves "ip6-localhost" when in
fact there is no such host known to my machine! That in turn made test
241 wrongly execute and fail.
Closes#5202
test1294: "split request" being when the entire request isn't sent in
the first go, and the remainder is sent in the PERFORM state. A GET
request is otherwise not sending anything during PERFORM.
test1295: same kind of split but with POST
Closes#5197
This change inverse the order of processing for the --etag-compare and
--etag-save option to process first --etag-compare. This in turn allows
to use the same file name to compare and save an etag.
The original behavior of not failing if the etag file does not exists is
conserved.
Fixes#5179Closes#5180
Replace the incomplete workaround regarding FD_CLOSE
only signalling once by instead doing a pre-check with
standard select and storing the result for later use.
select keeps triggering on closed sockets on Windows while
WSAEventSelect fires only once with data still available.
By doing the pre-check we do not run in a deadlock
due to waiting forever for another FD_CLOSE event.
Fix race-condition of waiting threads finishing while events are
already being processed which lead to invalid or skipped events.
Use mutex to check for one event at a time or do post-processing.
In addition to mutex-based locking use specific event as signal.
Closes#5156
Load long values correctly (e.g. for http_code).
Use curl_off_t (not long) for:
- size_download (CURLINFO_SIZE_DOWNLOAD_T)
- size_upload (CURLINFO_SIZE_UPLOAD_T)
The unit for these values is bytes/second, not microseconds:
- speed_download (CURLINFO_SPEED_DOWNLOAD_T)
- speed_upload (CURLINFO_SPEED_UPLOAD_T)
Fixes#5131Closes#5152
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
- send more data to make problems more obvious
- don't start the data with minus, it makes diffs harder to read
- skip the headers in the stdout comparison
- save to a file name to also verify 'filename_effective'
Ref: #5131
Update smbserver.py and negtelnetserver.py to be compatible with
Python 3 while staying backwards-compatible to support Python 2.
Fix string encoding and handling of echoed and transferred data.
Tested with both Python 2.7.17 and Python 3.7.7
Reported-by: Daniel Stenberg
Assisted-by: Kamil Dudka
Reviewed-by: Marcel Raad
Fixes#5104Closes#5110
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
Makes curl_easy_getinfo() of "variable" numerical content instead return
the number set in the env variable `CURL_TIME`.
Makes curl_version() of "variable" textual content. This guarantees a
stable version string which can be tested against. Environment variable
`CURL_VERSION` defines the content.
Assisted-by: Mathias Gumz
The test uses SRP to "a server not supporting it" but modern stunnel
versions will silently accept it and remain happy. The test is therefore
faulty.
I haven't figured out how to make stunnel explicitly reject SRP-using
connects.
Reported-by: Marc Hörsken
Fixes#5105Closes#5113
Users of the SMB tests will have to install impacket manually.
Reasoning: our in-tree version of impacket was quite outdated
and only compatible with Python 2 which is already end-of-life.
Upgrading to Python 3 and a compatible impacket version would
require to import additional Python-only and CPython-extension
dependencies. This would have hindered portability enormously.
Closes#5094
When extracting a <section> <part> and there's no </part> before
</section>, this now outputs an error and returns a wrong string to
make users spot the mistake.
Ref: #5070Closes#5071
Even though the existing code can be fixed to run on Python 3, the
tests will fail due to the Unicode transition the protocol is invalid.
Follow up to ee63837Closes#5085
Recent gcc warns when byte count of strncpy() equals the destination
buffer size. Since the destination buffer is previously cleared and
the source string is always shorter, reducing the byte count by one
silents the warning without affecting the result.
Closes#5059
When using maximum code optimization level (-O3), valgrind wrongly
detects uses of uninitialized values in strcmp().
Preset buffers with all zeroes to avoid that.
This test does A LOT of *wakeup() calls and then calls curl_multi_poll()
twice. The first *poll() is then expected to return early and the second
not - as the first is supposed to drain the socketpair pipe.
It turns out however that when given "excessive" amounts of writes to
the pipe, some operating systems (the Solaris based are known) will
return EAGAIN before the pipe is drained, which in our test case causes
the second *poll() call to also abort early.
This change attempts to avoid the OS-specific behaviors in the test by
reducing the amount of wakeup calls from 1234567 to 10.
Reported-by: Andy Fiddaman
Fixes#5037Closes#5058
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860Closes#4833
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 667 checks mimepost using single-byte read callback with encoder.
New test 668 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes#4860
Reported-by: RuurdBeerstra on github
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes#4826
Reported-by: MrdUkk on github
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes#4939Closes#4940
It is still possible to override the executable to run during the test,
using the <tool> tag, but this patch removes the requirement that the
tag must be present for unit tests.
It also removes the possibility of human error when existing test cases
are used as the basis for new tests, as recently witnessed in 81c37124.
Reviewed-by: Daniel Stenberg
Closes#4976
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes#4949Closes#4964
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
Support the SMTPUTF8 extension when sending mailbox information in the
MAIL command (FROM and AUTH parameters). Non-ASCII domain names will
be ACE encoded, if IDN is supported, whilst non-ASCII characters in
the local address part are passed to the server.
Reported-by: ygthien on github
Fixes#4828
The dot character between the host and the tld was not being escaped,
which meant it specified a match of 'any' character rather than an
explicit dot separator.
Additionally removed the dot character from the host name as it allowed
the following to be specified as a valid address in our test cases:
<bad@example......com>
Both are typos from 98f7ca7 and 8880f84 :(
I can't remember whether my intention was to allow sub-domains to be
specified in the host or not with these additional dots, but by placing
it outside of the host means it can only be specified once per domain
and by placing a + after the new grouping support for sub-domains is
kept.
Closes#4912
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
RFC 7616 section 3.4 (The Authorization Header Field) states that "For
historical reasons, a sender MUST NOT generate the quoted string syntax
for the following parameters: algorithm, qop, and nc". This removes the
quoting for the algorithm parameter.
Reviewed-by: Steve Holme
Closes#4890
... as this is already done much earlier in the URL parser.
Also add test case 894 that verifies that pop3 with an encodedd CR in
the user name is rejected.
Closes#4887
In the "scheme-less" parsing case, we need to strip off credentials
first before we guess scheme based on the host name!
Assisted-by: Jay Satiro
Fixes#4856Closes#4857
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
- Add new error code CURLE_QUIC_CONNECT_ERROR for QUIC connection
errors.
Prior to this change CURLE_FAILED_INIT was used, but that was not
correct.
Closes https://github.com/curl/curl/pull/4754
When using randomized features of runtests (-R and --shallow) it is
useful to have a fixed random seed to make sure for example extra
commits in a branch or a rebase won't change the seed that would make
repeated runs work differently.
As it is also useful to change seed sometimes, the default seed is now
determined based on the current month (and first line curl -V
output). When the month changes, so will the random seed.
The specific seed is also shown in the standard test suite top header
and it can be set explictly with the new --seed=[num] option so that the
exact order of a previous run can be achieved.
Closes#4734
It was removed for output containing ' =' via `s/ =.*//`. With classic
MinGW, this made lines with `free()` end with CRLF, but lines with e.g.
`malloc()` end with only LF. The tests expect LF only.
Closes https://github.com/curl/curl/pull/4788
Previously it would end up with an uninitialized memory buffer that
would lead to a crash or junk getting output.
Added test 1271 to verify.
Reported-by: Brian Carpenter
Closes#4786
Prior to this change the swsbounce check in service_connection could
fail because prevtestno and prevpartno were not set, which would cause
the wrong response data to be sent to some tests and cause them to fail.
Ref: https://github.com/curl/curl/pull/4717#issuecomment-570240785
Prior to this change tests that required NTLM feature did not require
SSL feature.
There are pending changes to cmake builds that will allow enabling NTLM
in non-SSL builds in Windows. In that case the NTLM auth strings created
are different from what is expected by the NTLM tests and they fail:
"The issue with NTLM is that previous non-SSL builds would not enable
NTLM and so the NTLM tests would be skipped."
Assisted-by: marc-groundctl@users.noreply.github.com
Ref: https://github.com/curl/curl/pull/4717#issuecomment-566218729
Closes https://github.com/curl/curl/pull/4768
Even if the initial request line wasn't found. With the fix to 1455, the
test number is now detected correctly.
(Problem found when running tests in random order.)
Closes#4744
On my current Debian Unstable with libidn2 2.2.0, I get an error if
LC_ALL is set to blank. Then curl errors out with:
curl: (3) Failed to convert www.åäö.se to ACE; could not convert string to UTF-8
Closes#4738
Fixup the test to instead not compare the port number. It sometimes
caused problems like this:
"curl: (45) bind failed with errno 98: Address already in use"
Closes#4733
When set, shallow mode limits runtests -t to make no more than NUM fails
per test case. If more are found, it will randomly discard entries until
the number is right. The random seed can also be set.
This is particularly useful when running MANY tests as then most torture
failures will already fail the same functions over and over and make the
total operation painfully tedious.
Closes#4699
This enables the use of Windows Subsystem for Linux (WSL) to run the
testsuite against Windows binaries while using Linux servers.
This commit introduces the following environment variables:
- CURL_TEST_EXE_EXT: set the executable extension for all components
- CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only
- CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only
Later testcurl.pl could be adjusted to make use of those variables.
- CURL_TEST_EXE_EXT_SRV: set it for the test servers only
(This is one of several commits to support use of WSL for the tests.)
Closes https://github.com/curl/curl/pull/3899
Keys created on Windows Subsystem for Linux (WSL) require it for some
reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
Bash in Windows Subsystem for Linux (WSL) requires it for some reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes#4544Closes#4557
Also, use `CURLRES_IPV6` only for actual DNS resolution, not for IPv6
address support. This makes it possible to connect to IPv6 literals by
setting `ENABLE_IPV6` even without `getaddrinfo` support. It also fixes
the CMake build when using the synchronous resolver without
`getaddrinfo` support.
Closes https://github.com/curl/curl/pull/4662
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Improved estimation of expected_len and updated related comments;
increased strictness of QNAME-encoding, adding error detection for empty
labels and names longer than the overall limit; avoided treating DNAME
as unexpected;
updated unit test 1655 with more thorough set of proofs and tests
Closes#4598
Regression from e59371a493 (7.67.0)
Added test 490, 491 and 492 to verify the functionality.
Reported-by: Kamil Dudka
Reported-by: Anderson Sasaki
Fixes#4588Closes#4591
The disable-scan script used in test 1165 is extended to also verify
that the docs cover all used defines and all defines offered by
configure.
Reported-by: SLDiggie on github
Fixes#4545Closes#4587
Classic MinGW / MSYS 1 doesn't support `MSYS2_ARG_CONV_EXCL`, so this
test unnecessarily failed when using `file:/` instead of `file:///`.
Closes https://github.com/curl/curl/pull/4554
- Use FORMAT_MESSAGE_IGNORE_INSERTS to ignore format specifiers in
Windows error strings.
Since we are not in control of the error code we don't know what
information may be needed by the error string's format specifiers.
Prior to this change Windows API error strings which contain specifiers
(think specifiers like similar to printf specifiers) would not be shown.
The FormatMessage Windows API call which turns a Windows error code into
a string could fail and set error ERROR_INVALID_PARAMETER if that error
string contained a format specifier. FormatMessage expects a va_list for
the specifiers, unless inserts are ignored in which case no substitution
is attempted.
Ref: https://devblogs.microsoft.com/oldnewthing/20071128-00/?p=24353
The URL parser function can't reject a bad IPv6 address properly when
curl was built without IPv6 support.
Reported-by: Marcel Raad
Fixes#4556Closes#4572
This way, we always have exactly one slash after the host name, making
the tests pass when curl is compiled with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4512
The MSYS system on Windows can run the test suite for curl built with
any toolset. When built with the MSYS GCC, curl uses Unix line endings,
while it uses Windows line endings when built with the MinGW GCC, and
`^O` reports 'msys' in both cases. Use the curl executable itself to
determine the line endings instead, which reports 'x86_64-pc-msys' when
built with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4506
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
This should again enable crazy-large download ranges of the style
[1-10000000] that otherwise easily ran out of memory starting in 7.66.0
when this new handle allocating scheme was introduced.
Reported-by: Peter Sumatra
Fixes#4393Closes#4438
The 'share object' only sets the storage area for cookies. The "cookie
engine" still needs to be enabled or activated using the normal cookie
options.
This caused the curl command line tool to accidentally use cookies
without having been told to, since curl switched to using shared cookies
in 7.66.0.
Test 1166 verifies
Updated test 506
Fixes#4429Closes#4434
The parser would check for a query part before fragment, which caused it
to do wrong when the fragment contains a question mark.
Extended test 1560 to verify.
Reported-by: Alex Konev
Fixes#4412Closes#4413
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes#4349
Added unit test case 1655 to verify.
Close#4352
the code correctly finds the flaws in the old code,
if one temporarily restores doh.c to the old version.
This is a protocol violation but apparently there are legacy proprietary
servers doing this.
Added test 336 and 337 to verify.
Reported-by: Philippe Marguinaud
Closes#4339
It needs to parse correctly. Otherwise it could be tricked into letting
through a-f using host names that libcurl would then resolve. Like
'[ab.be]'.
Reported-by: Thomas Vegas
Closes#4315
This allows the function to figure out if a unix domain socket has a
file name or not associated with it! When a socket is created with
socketpair(), as done in the fuzzer testing, the path struct member is
uninitialized and must not be accessed.
Bug: https://crbug.com/oss-fuzz/16699Closes#4283
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes#4254Closes#4255
When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes#4228Closes#4229
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes#4201
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to grandparent commit which added the tests.
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
Allow pretty much anything to be part of the ALPN identifier. In
particular minus, which is used for "h3-20" (in-progress HTTP/3
versions) etc.
Updated test 356.
Closes#4182
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c60355323.
Add regression tests 2077 and 2078 to cover this.
Fixes#3992Closes#4171
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes#4166
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes#4138
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes#3804
