This change adds experimental Metalink support to curl.
To enable Metalink support, run configure with --with-libmetalink.
To feed Metalink file to curl, use --metalink option like this:
$ curl -O --metalink foo.metalink
We use libmetalink to parse Metalink files.
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
Explicit conversion to 'long' of curl_easy_setopt() third argument for options
CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are
docummented to be used.
By comparing if a different "progress point" is reached or not since the
previous update, the progress function callback for this now avoids many
superfluous screen updates. This has the nice side-effect that it fixes
a problem that causes a second progress meter line.
The second line output happened because when we use the -# progress
meter, we force a newline output after the transfer in the main loop in
curl, but when libcurl calls the progress callback from
curl_easy_cleanup() it would then output the progress display
again. Possibly the naive newline output is wrong but this optimization
was suitable anyway...
Reported by: Daniel Theron
Bug: http://curl.haxx.se/bug/view.cgi?id=3517418
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
By modifying the parameter list for ourWriteOut() and passing the
OutStruct that collects data in tool_operate, we get access to the
remote name that we're writing to. Shell scripters should find this
useful when used in conjuntion with the --remote-header-name option.
This patch improves the output of curl's --libcurl option by
generating code which builds curl_httppost and curl_slist lists, and
uses symbolic names for enum and flag values. Variants of the
my_setopt macro in tool_setopt.h are added in order to pass extra type
information to the code-generation step in tool_setopt.c.
If curl is configured with --disable-libcurl-option then the macros
call curl_easy_setopt directly.
Fix the str2num() function to not check if the input string starts with a
digit, since strtol() supports numbers prepended with '-' (and '+') too.
This makes the --max-redirs option work as documented.
This new option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols. It uses the new libcurl option
CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via
the sockopt callback. If --keepalive-time is used, apply the value to
CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
Test case 1315 was added to verify this functionality. When passing in
multiple files to a single -F, the parser would get all confused if one
of the specified files had a custom type= assigned.
Reported by: Colin Hogben
Skip a floating point addition operation when integral part of time difference
is zero. This avoids potential floating point addition rounding problems while
preserving decimal part value.
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
The progress bar output function would blindly use the terminal width
without bounds checking. When using a very wide terminal that caused a
buffer overflow and segfault.
We now limit the max bar with to 255 columns, and I simplified the code
to avoid an extra snprintf and buffer.
Bug: http://curl.haxx.se/bug/view.cgi?id=3435710
Reported by: Alexey Zakhlestin
As commit 5850cc4808 clarifies, libcurl can deliver header lines that
are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that
size. The curl tool has check (when built debug-enabled) that made the
wrong checks and this new test 1205 verifies that larger headers work.
Previously we required that -S/--show-error was used _after_
-s/--silent. This was slightly confusing since we strive to make
arguments as position independent as possible.
Now, you can use them in any order and the result should still be the
same.
Bug: http://curl.haxx.se/bug/view.cgi?id=3424286
Reported by: Andreas Olsson
Maximum amount of data a header callback is supposed to get in
a single call from libcurl is limited by the lowest value of
CURL_MAX_WRITE_SIZE and CURL_MAX_HTTP_HEADER.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
When we use binary posts and regular ones intermixed on a single command
line, we cannot do strlen() etc on the data to figure out the length
(when inserting '&' and more). We must therefore keep track of the post
data length. Then we also end up setting the libcurl option with the
known size, so that we don't risk that libcurl will do strlen() on the
data.
This has the minor side-effect that --libcurl source codes now always
will use CURLOPT_POSTFIELDSIZE but I don't consider that terribly
damaging.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413181
Reported by: Taneli Vhkangas
Reorder handling of fields to match same order as the one given by current
definition order of 'Configurable' struct fields. Fields currently not handled
marked for further inspection.
Re-enabling MemoryTracking capability on 'src' subdirectory files and torture
tests have uncovered many issues which were going unnoticed in curl tool. So
here we go fixing some of them. Others still remain and should be addressed
ASAP, given that curl tool is used in our test harness also for test server
start verification purposes. There are even non-socket file descriptor leaks.
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
As a bonus, this lets our MemoryTracking subsystem track zlib operations.
And also fixes a shortcut some zlib 1.2.x versions took using malloc()
instead of calloc(), which would trigger memory debuggers warnings on
memory being used without having been initialized.
Follow-up to commit 5eb2396cd as that wasn't complete.
At times HEADERFUNCTION+HEADERDATA was set only to have only HEADERDATA
set in the subsequent loop which could cause a NULL to get sent as
userdata to 'header_callback' which wasn't made to handle that.
Now HEADERFUNCTION is explicitly set to NULL if it isn't set to the
callback.
Using this option with an argument being set to one of
none/policy/always instructs libcurl how to deal with GSS
credentials. Or rather how it tells the server that delegation is fine
or not.
Allow configure builds to generate src/config-win32.h
Skip checksrc on src/config-win32.h contents already checked at lib/config-win32.h
Allow multiple -W in checksrc.pl
Allow compilation of libcurl and curl using BSD-style lwIP on Win32.
In order to compile libcurl and curl with this support it is necessary
to edit files lib/config-win32.h and src/config-win32.h and uncomment
a line to make definition of preprocessor symbol USE_LWIPSOCK visible.
Afterwards you can compile as usual.
In order to use compiled library with BSD-style lwIP TCP/IP stack in
your program it is mandatory that you include lwIP header file <lwip/opt.h>
before including <curl/curl.h> or <curl/multi.h>
Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.ziphttp://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
Have fun!
Content-disposition headers can provide file names with semicolons which
previously would be cut off at that point.
Added test case 1311 and 1312 to verify -J.
Bug: http://curl.haxx.se/bug/view.cgi?id=3375603
Reported by: Peter Hjalmarsson
First, the -J/--remote-header-name was wrongly sorted in the --help
output as pointed out in bug report #3349271.
Then, I changed the format of the texts to follow the man page better in
that it now uses "-A, --long" intead of "-A/--long". I also made all
additional arguments get written as in "-A, --long FILENAME" instead of
the previous "<filename>" style.
Reported by: Herve Amblard
Bug: http://curl.haxx.se/bug/view.cgi?id=3349271
Improved library search by check_function_exists_concat() macro:
it does not revert the list of libraries any more.
Improved OpenSSL library search: first find zlib, then search for
openssl libraries that may depend on zlib.
For Unix: openssl libraries can now be detected in nonstandard
locations. Supply CMAKE_LIBRARY_PATH to CMake on command line.
Added installation capability (very basic one yet).
The make target checksrc now works in the root makefile and in both the
src and lib directories.
It is also run automatically on "all" if configure --enable-debug was
used.
For now we directly import the Idn* symbols with the linker;
an upcoming release of OWC will have these added to the import
lib normaliz.lib, and prototypes are added to winnnls.h.
It is now possible to use any combination of features without
having to 1st add makefile targets to the main makefile. The
main makefile now passes the 'mingw32-feat1-feat2' as var CFG,
and the ./[lib|src]/Makefile.m32 parses the CFG var to determine
the features to be enabled.
