It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes#4544Closes#4557
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Prior to this change:
The check if an extra wait is necessary was based not on the
number of extra fds but on the pointer.
If a non-null pointer was given in extra_fds, but extra_nfds
was zero, then the wait was skipped even though poll was not
called.
Closes https://github.com/curl/curl/pull/4610
Since 59041f0, a new timer might be set in multi_done() so the clearing
of the timers need to happen afterwards!
Reported-by: Max Kellermann
Fixes#4575Closes#4583
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
Curl_disconnect bails out if conn->easyq is not empty, detach_connection
needs to be called first to remove the current easy from the queue.
Fixes#4144Closes#4151
- The transfer hashes weren't using the correct keys so removing entries
failed.
- Simplified the iteration logic over transfers sharing the same socket and
they now simply are set to expire and thus get handled in the "regular"
timer loop instead.
Reported-by: Tom van der Woerdt
Fixes#4012Closes#4014
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes#3961Fixes#3986Fixes#3995Fixes#4004Closes#3997
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes#3994Closes#4001
An inner loop within the singlesocket() function wrongly re-used the
variable for the outer loop which then could cause an infinite
loop. Change to using a separate variable!
Reported-by: Eric Wu
Fixes#3970Closes#3973
They need to be removed from the socket hash linked list with more care.
When sh_delentry() is called to remove a sockethash entry, remove all
individual transfers from the list first. To enable this, each Curl_easy struct
now stores a pointer to the sockethash entry to know how to remove itself.
Reported-by: Tom van der Woerdt and Kunal Ekawde
Fixes#3952Fixes#3904Closes#3953
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
With transfers being queued up, we only move one at a a time back to the
CONNECT state but now we mark moved transfers so that when a moved
transfer is confirmed "successful" (it connected) it will trigger the
move of another pending transfer. Previously, it would otherwise wait
until the transfer was done before doing this. This makes queued up
pending transfers get processed (much) faster.
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
Fixes#3745Closes#3746
The following snippet
```
int main()
{
CURL* hCurlHandle = curl_easy_init();
curl_easy_setopt(hCurlHandle, CURLOPT_URL, "http://example.com");
curl_easy_setopt(hCurlHandle, CURLOPT_PROXY, "1");
curl_easy_perform(hCurlHandle);
curl_easy_cleanup(hCurlHandle);
return 0;
}
```
triggers the following Valgrind warning
```
==4125== Invalid read of size 8
==4125== at 0x4E7D1EE: Curl_llist_remove (llist.c:97)
==4125== by 0x4E7EF5C: detach_connnection (multi.c:798)
==4125== by 0x4E80545: multi_runsingle (multi.c:1451)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Address 0x9b3d1d0 is 1,120 bytes inside a block of size 1,600 free'd
==4125== at 0x4C2ECF0: free (vg_replace_malloc.c:530)
==4125== by 0x4E62C36: conn_free (url.c:756)
==4125== by 0x4E62D34: Curl_disconnect (url.c:818)
==4125== by 0x4E48DF9: Curl_once_resolved (hostip.c:1097)
==4125== by 0x4E8052D: multi_runsingle (multi.c:1446)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Block was alloc'd at
==4125== at 0x4C2F988: calloc (vg_replace_malloc.c:711)
==4125== by 0x4E6438E: allocate_conn (url.c:1654)
==4125== by 0x4E685B4: create_conn (url.c:3496)
==4125== by 0x4E6968F: Curl_connect (url.c:4023)
==4125== by 0x4E802E7: multi_runsingle (multi.c:1368)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
```
This has been bisected to commit 2f44e94
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14109
Credit to OSS Fuzz
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
This code was once used for the non multi-interface using code path, but
ever since easy_perform was turned into a wrapper around the multi
interface, this code path never runs.
Closes#3666
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
Failing to do so would make the CURLINFO_TOTAL_TIME timeout to not get
updated correctly and could end up getting reported to the application
completely wrong (way too small).
Reported-by: accountantM on github
Fixes#3602Closes#3605
The variable wasn't properly reset within the loop and thus could remain
set for sockets that hadn't been set before and miss notifying the app.
This is a follow-up to 4c35574 (shipped in curl 7.64.0)
Reported-by: buzo-ffm on github
Detected-by: Jan Alexander Steffens
Fixes#3585Closes#3589
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Fixes#3436Closes#3448
Problem 1
After LOTS of scratching my head, I eventually realized that even when doing
10 uploads in parallel, sometimes the socket callback to the application that
tells it what to wait for on the socket, looked like it would reflect the
status of just the single transfer that just changed state.
Digging into the code revealed that this was indeed the truth. When multiple
transfers are using the same connection, the application did not correctly get
the *combined* flags for all transfers which then could make it switch to READ
(only) when in fact most transfers wanted to get told when the socket was
WRITEABLE.
Problem 1b
A separate but related regression had also been introduced by me when I
cleared connection/transfer association better a while ago, as now the logic
couldn't find the connection and see if that was marked as used by more
transfers and then it would also prematurely remove the socket from the socket
hash table even in times other transfers were still using it!
Fix 1
Make sure that each socket stored in the socket hash has a "combined" action
field of what to ask the application to wait for, that is potentially the ORed
action of multiple parallel transfers. And remove that socket hash entry only
if there are no transfers left using it.
Problem 2
The socket hash entry stored an association to a single transfer using that
socket - and when curl_multi_socket_action() was called to tell libcurl about
activities on that specific socket only that transfer was "handled".
This was WRONG, as a single socket/connection can be used by numerous parallel
transfers and not necessarily a single one.
Fix 2
We now store a list of handles in the socket hashtable entry and when libcurl
is told there's traffic for a particular socket, it now iterates over all
known transfers using that single socket.
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
Do not assume/store assocation between a given easy handle and the
connection if it can be avoided.
Long-term, the 'conn->data' pointer should probably be removed as it is a
little too error-prone. Still used very widely though.
Reported-by: masbug on github
Fixes#3391Closes#3400
The time_t type is unsigned on some systems and these variables are used
to hold return values from functions that return timediff_t
already. timediff_t is always a signed type.
Closes#3363
This is a companion patch to cbea2fd2c (NTLM: force the connection to
HTTP/1.1, 2018-12-06): with NTLM, we can switch to HTTP/1.1
preemptively. However, with other (Negotiate) authentication it is not
clear to this developer whether there is a way to make it work with
HTTP/2, so let's try HTTP/2 first and fall back in case we encounter the
error HTTP_1_1_REQUIRED.
Note: we will still keep the NTLM workaround, as it avoids an extra
round trip.
Daniel Stenberg helped a lot with this patch, in particular by
suggesting to introduce the Curl_h2_http_1_1_error() function.
Closes#3349
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
curl_multi_wait() was erroneously used from within
curl_easy_perform(). It could lead to it believing there was no socket
to wait for and then instead sleep for a while instead of monitoring the
socket and then miss acting on that activity as swiftly as it should
(causing an up to 1000 ms delay).
Reported-by: Antoni Villalonga
Fixes#3305Closes#3306Closes#3308
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
Curl_follow() no longer frees the string. Make sure it happens in the
caller function, like we normally handle allocations.
This bug was introduced with the use of the URL API internally, it has
never been in a release version
Reported-by: Dario Weißer
Closes#3149
Transparently. The related curl_multi_setopt() options all still returns
OK when pipelining is selected.
To re-enable the support, the single line change in lib/multi.c needs to
be reverted.
See docs/DEPRECATE.md
Closes#2705
It was previously erroneously skipped in some situations.
libtest/libntlmconnect.c wrongly depended on wrong behavior (that it
would get a zero timeout) when no handles are "running" in a multi
handle. That behavior is no longer present with this fix. Now libcurl
will always return a -1 timeout when all handles are completed.
Closes#2733
When the application just started the transfer and then stops it while
the name resolve in the background thread hasn't completed, we need to
wait for the resolve to complete and then cleanup data accordingly.
Enabled test 1553 again and added test 1590 to also check when the host
name resolves successfully.
Detected by OSS-fuzz.
Closes#1968
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
... it might call infof() with a NULL first argument that isn't harmful
but makes it not do anything. The infof() line is not very useful
anymore, it has served it purpose. Good riddance!
Fixes#2627
The latest psl is cached in the multi or share handle. It is refreshed
before use after 72 hours.
New share lock CURL_LOCK_DATA_PSL controls the psl cache sharing.
If the latest psl is not available, the builtin psl is used.
Reported-by: Yaakov Selkowitz
Fixes#2553Closes#2601
This extends the INDENTATION case to also handle 'else' statements
and require proper indentation on the following line. Also fixes the
offending cases found in the codebase.
Closes#2532
When receiving REFUSED_STREAM, mark the connection for close and retry
streams accordingly on another/fresh connection.
Reported-by: Terry Wu
Fixes#2416Fixes#1618Closes#2510
When a transfer is requested to get done and it is put in the pending
queue when limited by number of connections, total or per-host, libcurl
would previously very aggressively retry *ALL* pending transfers to get
them transferring. That was very time consuming.
By reducing the aggressiveness in how pending are being retried, we
waste MUCH less time on putting transfers back into pending again.
Some test cases got a factor 30(!) speed improvement with this change.
Reported-by: Cyril B
Fixes#2369Closes#2383
Especially unpausing a transfer might have to move the socket back to the
"currently used sockets" hash to get monitored. Otherwise it would never get
any more data and get stuck. Easily triggered with pausing using the
multi_socket API.
Reported-by: Philip Prindeville
Bug: https://curl.haxx.se/mail/lib-2018-03/0048.htmlFixes#2393Closes#2391
Due to very frequent updates of the rate limit "window", it could
attempt to rate limit within the same milliseconds and that then made
the calculations wrong, leading to it not behaving correctly on very
fast transfers.
This new logic updates the rate limit "window" to be no shorter than the
last three seconds and only updating the timestamps for this when
switching between the states TOOFAST/PERFORM.
Reported-by: 刘佩东
Fixes#2386Closes#2388
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
returning 'time_t' is problematic when that type is unsigned and we
return values less than zero to signal "already expired", used in
several places in the code.
Closes#2021
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
