Moved the error constant switch to curl_sspi.c and added two new helper
functions to curl_sspi.[ch] which either return the constant or a fully
translated message representing the SSPI security status.
Updated socks_sspi.c and curl_schannel.c to use the new functions.
Windows 2000 Professional: Schannel returns SEC_E_OK instead
of SEC_I_CONTEXT_EXPIRED. If the length of the output buffer
is zero and the first byte of the encrypted packet is 0x15,
the application can safely assume that the message was a
close_notify message and change the return value to
SEC_I_CONTEXT_EXPIRED.
Connection shutdown does not mean that there is no data to read
Correctly handle incomplete message and ask curl to re-read
Fixed buffer for decrypted being to small
Re-structured read condition to be more effective
Removed obsolete verbose messages
Changed memory reduction method to keep a minimum buffer of size 4096
Fixed warning: dereferencing pointer does break strict-aliasing rules
by using a union instead of separate pointer variables.
Internal union sockaddr_u could probably be moved to generic header.
Thanks to Paul Howarth for the hint about using unions for this.
Important for winbuild: Separate declaration of sockaddr_u pointer.
The pointer variable *sock cannot be declared and initialized right
after the union declaration. Therefore it has to be a separate statement.
Since Curl_pgrsDone() itself calls Curl_pgrsUpdate() which may return an
abort instruction or similar we need to return that info back and
subsequently properly handle return codes from Curl_pgrsDone() where
used.
(Spotted by a Coverity scan)
Previously it would use a 256 byte buffer and thus cut off very long
subject names. The limit is now upped to the receive buffer size, 16K.
Bug: http://curl.haxx.se/bug/view.cgi?id=3533045
Reported by: Anthony G. Basile
Re-factored the smtp_state_*_resp() functions to 1) Match the constants
that were refactored in commit 00fddba672, 2) To be more readable and
3) To match their counterparties in pop3.c.
Corrected lines longer than 78 characters.
Removed unnecessary braces in smtp_state_helo_resp().
Introduced some comments in data sending functions.
Tidied up comments to match changes made in pop3.c.
Corrected lines longer than 78 characters.
Changed POP3_AUTH_FINAL to POP3_AUTH to match SMTP code now that the
AUTH command is no longer sent on its own.
Introduced some comments in data sending functions.
Another attempt at trying to rational code and comment style.
Added a service type parameter to Curl_sasl_create_digest_md5_message()
to allow the function to be used by different services rather than being
hard coded to "smtp".
Not all SASL enabled POP3 servers support the AUTH command on its own
when trying to detect the supported mechanisms. As such changed the
mechanism detection to use the CAPA command instead.
Because pop3_endofresp() is called for each line of data yet is not
passed the line and line length, so we have to use the data pointed to
by pp->linestart_resp which contains the whole packet, the mechanisms
were being detected in one call yet the function would be called for
each line of data.
Using curl with verbose mode enabled would show that one line of data
would be received in response to the AUTH command, before the AUTH
<mechanism> command was sent to the server and then the next few lines
of the original AUTH command would be displayed before the response from
the AUTH <mechanism> command. This would then cause problems when
parsing the CRAM-MD5 challenge data as extra data was contained in the
buffer.
Changed the parsing so that each line is checked for the mechanisms
and the function returns FALSE until the whole of the AUTH response has
been processed.
Previously it wasn't possible to connect to POP3 and not specify the
user name as a CURLE_ACCESS_DENIED error would be returned. This error
occurred because USER would be sent to the server with a blank user name
if no mailbox user was specified as the server would reply with -ERR.
This wasn't a problem prior to the 7.26.0 release but with the
introduction of custom commands the user and/or application developer
might want to issue a CAPA command without having to log in as a
specific mailbox user.
Additionally this fix won't send the newly introduced AUTH command if no
user name is specified.
Rather than encoding the password message itself the
smtp_state_authpasswd_resp() function now delegates the work to the same
function that smtp_state_authlogin_resp() and smtp_authenticate() use
when constructing the encoded user name.
In preparation for moving to the SASL module re-factored the
smtp_auth_login_user() function to smtp_auth_login() so that it can be
used for both user names and passwords as sending both of these under
the login authentication mechanism is the same.
The POP3 protocol doesn't really have the concept of error codes and
uses +, +OK and -ERR in response to commands to indicate continue,
success and error.
The AUTH command is one of those commands that requires multiple pieces
of data to be sent to the server where the server will respond with + as
part of the handshaking. This meant changing the values before
continuing with the next stage of adding authentication support.
Changed the order of the state machine to match the order of actual
events.
Reworked some comments and function parameter positioning that I missed
the other day.
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
Moved EOB definition into header file.
Switched the logic around in pop3_endofresp() to allow for the
introduction of auth-mechanism detection.
Repositioned second and third function variables where they will fit
within the 78 character line limit.
Tidied up some comments.
Move the SMTP_AUTH constants into a separate header file in
preparation for adding SASL based authentication to POP3 as the two
protocols will need to share them.
Due to the result code being reset to CURLE_OK when smtp_dophase_done()
was called, postdata would incorrectly be sent to the server when the
MAIL FROM or RCPT command was rejected.
As such, libcurl would return the wrong result code from performing the
operation and additionally set CURLINFO_RESPONSE_CODE to be that
returned by the postdata command.
Bug: http://curl.haxx.se/mail/lib-2012-05/0108.html
Reported by: Gokhan Sengun
In nettle/md5.h, md5_init and md5_update are defined as macros to
nettle_md5_init and nettle_md5_update respectively. This causes
error when using MD5_params.md5_init and md5_update. This patch
renames these members as md5_init_func and md5_update_func to
avoid name conflict. For completeness, MD5_params.md5_final was
also renamed as md5_final_func.
The changes in curl_ntlm_core.c is conversion error and fixed by
casting to proper type.
A dot character at the beginning of a line would not be escaped to a
double dot as required by RFC-2821, instead it would be deleted by the
mail server. Please see section 4.5.2 of the RFC for more information.
Note: This fix also simplifies the detection of repeated CRLF.CRLF
combinations, such as CRLF.CRLF.CRLF, a little rather than having to
advance the eob counter to 2.
Roman Mamedov spotted (in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126) that curl would
not complain when given a URL with an IPv6 numerical address without
brackets. It would simply cut off the last ":[hex]" part and thus not
work correctly.
That's a URL using an illegal syntax and now libcurl will instead return
a clear error code and error message detailing the error.
The above mentioned bug report claims this to be a regression but
libcurl does not guarantee functionality when given URLs that aren't
following the URL spec (RFC3986 mostly). I consider the fact that it
used to handle this differently a mere coincidence.
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
Commit 9109cdec11 brought this regression (shipped since 7.24.0).
The singleipconnect() function must not return an error if Curl_socket()
returns an error. It should then simply return OK and pass a SOCKET_BAD
back simply because that is how the user of this function expects it to
work and something else is not fine.
Reported by: Blaise Potard
Bug: http://curl.haxx.se/bug/view.cgi?id=3516508
Include stdbool.h only when it is available and configure is capable of
detecting a proper 'bool' data type when the header is included.
Compilation fix for old or unpatched versions of XL C compiler.
Report: http://curl.haxx.se/mail/archive-2012-04/0022.html
NSS_InitContext() was introduced in NSS 3.12.5 and helps to prevent
collisions on NSS initialization/shutdown with other libraries.
Bug: https://bugzilla.redhat.com/738456
configure script now provides conditional definitions for Makefile.am
that result in CURL_HIDDEN_SYMBOLS being defined by resulting makefiles
when appropriate.
Additionally, configure script option for symbol hiding control is now
named --enable-symbol-hiding --disable-symbol-hiding. While still valid,
old option name --enable-hidden-symbols --disable-hidden-symbols will
be deprecated in some future release.
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
Curl_socket returns CURLE_COULDNT_CONNECT when the opensocket callback
returns CURL_SOCKET_BAD. Previous return value CURLE_FAILED_INIT
conveys incorrect information to the user.
Reworked the command sending from two specific LIST and RETR command
functions into a single command based function as well as the two
associated response handlers into a generic command handler.
If an empty string is passed to CURLOPT_SSH_PUBLIC_KEYFILE, libcurl will
pass no public key to libssh2 which then tries to compute it from the
private key. This is known to work when libssh2 1.4.0+ is linked against
OpenSSL.
This change replaces RFC 2818 based hostname check in OpenSSL build with
RFC 6125 [1] based one.
The hostname check in RFC 2818 is ambiguous and each project implements
it in the their own way and they are slightly different. I check curl,
gnutls, Firefox and Chrome and they are all different.
I don't think there is a bug in current implementation of hostname
check. But it is not as strict as the modern browsers do. Currently,
curl allows multiple wildcard character '*' and it matches '.'. (as
described in the comment in ssluse.c).
Firefox implementation is also based on RFC 2818 but it only allows at
most one wildcard character and it must be in the left-most label in the
pattern and the wildcard must not be followed by any character in the
label.[2] Chromium implementation is based on RFC 6125 as my patch does.
Firefox and Chromium both require wildcard in the left-most label in the
presented identifier.
This patch is more strict than the current implementation, so there may
be some cases where old curl works but new one does not. But at the same
time I think it is good practice to follow the modern browsers do and
follow the newer RFC.
[1] http://tools.ietf.org/html/rfc6125#section-6.4.3
[2] https://bugzilla.mozilla.org/show_bug.cgi?id=159483
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
It is now possible to calculate the md5 sum as the stream of buffers
becomes known where as previously it was only possible to calculate the
md5 sum of a pre-prepared buffer.
This feature allows the user to specify and use additional POP3
commands such as UIDL and DELE via libcurl's CURLOPT_CUSTOMREQUEST or
curl's -X command line option.
Simplified the code to remove the need for a separate "LIST <msg id>"
command handler and state machine and instead use the LIST command
handler for both operations.
Moved the server greeting response handling code from the statemach_act
functions to separate response functions. This makes the code simpler
to follow and provides consistency with the other responses that are
handled here.
The commit e650dbde86 that stripped off [brackets] from ipv6-only host
headers for the sake of cookie parsing wrongly incremented the host
pointer which would cause a bad free() call later on.
The refactoring of HTTP CONNECT handling in commit 41b0237834 that
made it protocol independent broke it for the multi interface. This fix
now introduce a better state handling and moved some logic to the
http_proxy.c source file.
Reported by: Yang Tse
Bug: http://curl.haxx.se/mail/lib-2012-03/0162.html
