Currently CMake cannot detect Brotli support. This adds detection of the
libraries and associated header files. It also adds this to the
generated config.
Closes#2392
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
When a transfer is requested to get done and it is put in the pending
queue when limited by number of connections, total or per-host, libcurl
would previously very aggressively retry *ALL* pending transfers to get
them transferring. That was very time consuming.
By reducing the aggressiveness in how pending are being retried, we
waste MUCH less time on putting transfers back into pending again.
Some test cases got a factor 30(!) speed improvement with this change.
Reported-by: Cyril B
Fixes#2369Closes#2383
Especially unpausing a transfer might have to move the socket back to the
"currently used sockets" hash to get monitored. Otherwise it would never get
any more data and get stuck. Easily triggered with pausing using the
multi_socket API.
Reported-by: Philip Prindeville
Bug: https://curl.haxx.se/mail/lib-2018-03/0048.htmlFixes#2393Closes#2391
Due to very frequent updates of the rate limit "window", it could
attempt to rate limit within the same milliseconds and that then made
the calculations wrong, leading to it not behaving correctly on very
fast transfers.
This new logic updates the rate limit "window" to be no shorter than the
last three seconds and only updating the timestamps for this when
switching between the states TOOFAST/PERFORM.
Reported-by: 刘佩东
Fixes#2386Closes#2388
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
gss_seal/gss_unseal have been deprecated in favor of
gss_wrap/gss_unwrap with GSS-API v2 from January 1997 [1]. The first
version of "The Kerberos Version 5 GSS-API Mechanism" [2] from June
1996 already says "GSS_Wrap() (formerly GSS_Seal())" and
"GSS_Unwrap() (formerly GSS_Unseal())".
Use the nondeprecated functions to avoid deprecation warnings.
[1] https://tools.ietf.org/html/rfc2078
[2] https://tools.ietf.org/html/rfc1964
Closes https://github.com/curl/curl/pull/2356
On MinGW and Cygwin, GCC and clang have been complaining about macro
redefinitions since 4272a0b0fc. Fix this
by undefining the macros before redefining them as suggested in
https://github.com/curl/curl/pull/2269.
Suggested-by: Daniel Stenberg
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Previously, it would only check for max length if the existing alloc
buffer was to small to fit it, which often would make the header still
get used.
Reported-by: Guido Berhoerster
Bug: https://curl.haxx.se/mail/lib-2018-02/0056.htmlCloses#2315
The list of state names (used in debug builds) was out of sync in
relation to the list of states (used in all builds).
I now added an assert to make sure the sizes of the two lists match, to
aid in detecting this mistake better in the future.
Regression since c92d2e14cf, shipped in 7.58.0.
Reported-by: Somnath Kundu
Fixes#2312Closes#2313
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
Some servers return a "content-encoding" header with a non-standard
"none" value.
Add "none" as an alias to "identity" as a work-around, to avoid
unrecognised content encoding type errors.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
Closes https://github.com/curl/curl/pull/2298
Windows 10.0.17061 SDK introduces support for Unix Domain Sockets.
Added the necessary include file to curl_addrinfo.c.
Note: The SDK (which is considered beta) has to be installed, VS 2017
project file has to be re-targeted for Windows 10.0.17061 and #define
enabled in config-win32.h.
When peer verification is disabled, calling
SSL_CTX_load_verify_locations is not necessary. Only call it when
verification is enabled to save resources and increase performance.
Closes#2290
Reduce code duplication by making Curl_mime_contenttype available and
used by the formdata function. This also makes the formdata function
recognize a set of more file extensions by default.
PR #2280 brought this to my attention.
Closes#2282
Whenever an expected pattern syntax rule cannot be matched, the
character starting the rule loses its special meaning and the parsing
is resumed:
- backslash at the end of pattern string matches itself.
- Error in [:keyword:] results in set containing :\[dekorwy.
Unit test 1307 updated for this new situation.
Closes#2273
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
In case an identity didn't match[0], the state machine would fail in
state SSH_AUTH_AGENT instead of progressing to the next identity in
ssh-agent. As a result, ssh-agent authentication only worked if the
identity required happened to be the first added to ssh-agent.
This was introduced as part of commit c4eb10e2f0, which
stated that the "else" statement was required to prevent getting stuck
in state SSH_AUTH_AGENT. Given the state machine's logic and libssh2's
interface I couldn't see how this could happen or reproduce it and I
also couldn't find a more detailed description of the problem which
would explain a test case to reproduce the problem this was supposed to
fix.
[0] libssh2_agent_userauth returning LIBSSH2_ERROR_AUTHENTICATION_FAILED
Closes#2248
Follow-up to 84fcaa2e7. libressl does not have the API even if it says it is
late OpenSSL version...
Fixes#2246Closes#2247
Reported-by: jungle-boogie on github
1. don't use "ULL" suffix since unsupported in older MSVC
2. use curl_off_t instead of custom long long ifdefs
3. make get_posix_time() not do unaligned data access
Fixes#2211Closes#2240
Reported-by: Chester Liu
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Prior to this change the stored byte count of each trailer was
miscalculated and 1 less than required. It appears any trailer
after the first that was passed to Curl_client_write would be truncated
or corrupted as well as the size. Potentially the size of some
subsequent trailer could be erroneously extracted from the contents of
that trailer, and since that size is used by client write an
out-of-bounds read could occur and cause a crash or be otherwise
processed by client write.
The bug appears to have been born in 0761a51 (precedes 7.49.0).
Closes https://github.com/curl/curl/pull/2231
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
