The default target should only build libcurl and curl. Add a dedicated
'testdeps' target which will be used later when running tests. Note that
unittests are currently broken in CMake and already excluded.
Closes#5368
The tftpd server may still be busy if the total timeout of
25 seconds has not been reached or no sread error was received
during or after the execution of the timeout test 1238.
Once the next TFTP test comes around (eg. 1242 or 1243),
those will fail because the tftpd server is still waiting
on data from curl due to the UDP protocol being stateless
and having no connection close. On Linux this error may not
happen, because ICMP errors generated due to a swrite error
can also be returned async on the next sread call instead.
Therefore we will now just kill the tftpd server after test
1238 to make sure that the following tests are not affected.
This enables us to no longer ignore tests 1242, 1243, 2002
and 2003 on the CI platforms CirrusCI and AppVeyor.
Assisted-by: Peter Wu
Closes#5364
setjmp.h should only be included if HAVE_SETJMP_H is defined.
Add additional log statements to see wether reads and writes
are blocking or finishing before an alarm signal is received.
Assisted-by: Peter Wu
Part of #5364
OpenSSH for Windows shows group and other/world permissions as *,
because those concepts do not exist on Windows. It also does not
show the current or parent directory, so we just ignore those.
Reviewed-by: Daniel Stenberg
Closes#5328
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
Remove many one second sleeps that were done *after* each newly started
test server already has been verified. They should not have any purpose
there.
Closes#5323
This makes sure that select_ws behaves similar to real select
which stops waiting on a signal handler being triggered.
This makes it possible to gracefully stop sockfilt.exe on
Windows with taskkill /IM sockfilt.exe (without /F force flag).
Reviewed-by: Jay Satiro
Part of #5260
This commit adds a global exit event to the test servers that
Windows-specific wait routines can use to get triggered if the
program was signaled to be terminated, eg. select_ws in sockfilt.c
The exit event will be managed by the signal handling code and is
set to not reset automatically to support multiple wait routines.
Reviewed-by: Jay Satiro
Closes#5260
Use raise to trigger signal handler instead of calling it
directly and causing potential unexpected control flow.
Reviewed-by: Jay Satiro
Part of #5260
OpenSSH for Windows requires paths in the format of /C:/
instead of the pseudo-POSIX paths /cygdrive/c/ or just /c/
Reviewed-by: Daniel Stenberg
Closes#5298
Several tests referred to specific server ports even when the test
didn't actually use that server or specify that it's needed. In such
cases, the test harness substitutes the text "[not running]" as the port
number which causes many such tests to fail due to the inability to
parse the URL. These tests are changed to use %NOLISTENPORT which will
always be substituted correctly.
More connection cache accesses are protected by locks.
CONNCACHE_* is a beter prefix for the connection cache lock macros.
Curl_attach_connnection: now called as soon as there's a connection
struct available and before the connection is added to the connection
cache.
Curl_disconnect: now assumes that the connection is already removed from
the connection cache.
Ref: #4915Closes#5009
As stunnel is an external tool and it has no specific option to export
the actually used port number when asked to listen to 0, runtests
instead iterates over ten randomly picked high number ports and sticks
to the first one stunnel can listen to.
Closes#5267
These were commented out in e9dd099870 when Makefile.inc was included
instead. 11 years have passed since then and the commented code is of
course very outdated. Remove it to avoid confusion.
Closes#5311
Since the http2 test server is a mere proxy that needs to know about the
dynamic port the HTTP server is using, it too needs to get restarted
when the http server is killed.
A regression caused by 80d6515.
Fixes#5289Closes#5291
Prior to this change if there was a 303 reply to a PUT request then
the subsequent request to respond to that redirect would also be a PUT.
It was determined that was most likely incorrect based on the language
of the RFCs. Basically 303 means "see other" resource, which implies it
is most likely not the same resource, therefore we should not try to PUT
to that different resource.
Refer to the discussions in #5237 and #5248 for more information.
Fixes https://github.com/curl/curl/issues/5237
Closes https://github.com/curl/curl/pull/5248
The purpose with this variable is to provide a port number that is
reasonably likely to not have a listener on the local host so that tests
can try connect failures against it. It uses port 47 - "reserved"
according to IANA.
Updated six tests to use it instead of the previous different ports.
Assisted-by: Emil Engler
Closes#5270
This fixes the error: 'for' loop initial declaration used outside C99
mode by declaring the loop increment variable in the beginning of the
block instead of inside the for loop.
Fixes#5254
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
FTP, IMAP, POP3, SMTP and their IPv6 versions are now all on dynamic
ports
Test 842-845 are unfortunately a bit hard to move over to this concept
right now and require "default port" still...
The runtests script now always performs variable replacement on the
entire test source file before the test gets executed, and saves the
updated version in a temporary file (log/test[num]) so that all test
case readers/servers can use that version (if present) and thus enjoy
the powers of test case variable substitution.
This is necessary to allow complete port number freedom.
Test 309 is updated to work with a non-fixed port number thanks to this.
Since the Windows versions of both programs would write Windows
PIDs to their pidfiles which we cannot handle, we need to use
our known perl.exe Cygwin/msys PID together with exec() in order
to tie the spawned processes to the existance of our perl.exe
The perl.exe that is executing secureserver.pl and sshserver.pl
has a Cygwin/msys PID, because it is started inside Cygwin/msys.
Related to #5188
- Ignore intermediate progress updates.
- Support locales that use a character other than period as decimal
separator (eg 100,0%).
test1148 checks that the progress finishes at 100% and has the right
bar width. Prior to this change the test assumed that the only progress
reported for such a quick transfer was 100%, however in rare instances
(like in the CI where transfer time can slow considerably) there may be
intermediate updates. For example, below is stderrlog1148 from a failed
CI run with explicit \r and \n added (it is one line; broken up so that
it's easier to understand).
\r
\r################################## 48.3%
\r######################################################################## 100.0%
\n
Closes https://github.com/curl/curl/pull/5194
With this bit set, my mac successfully resolves "ip6-localhost" when in
fact there is no such host known to my machine! That in turn made test
241 wrongly execute and fail.
Closes#5202
test1294: "split request" being when the entire request isn't sent in
the first go, and the remainder is sent in the PERFORM state. A GET
request is otherwise not sending anything during PERFORM.
test1295: same kind of split but with POST
Closes#5197
This change inverse the order of processing for the --etag-compare and
--etag-save option to process first --etag-compare. This in turn allows
to use the same file name to compare and save an etag.
The original behavior of not failing if the etag file does not exists is
conserved.
Fixes#5179Closes#5180
Replace the incomplete workaround regarding FD_CLOSE
only signalling once by instead doing a pre-check with
standard select and storing the result for later use.
select keeps triggering on closed sockets on Windows while
WSAEventSelect fires only once with data still available.
By doing the pre-check we do not run in a deadlock
due to waiting forever for another FD_CLOSE event.
Fix race-condition of waiting threads finishing while events are
already being processed which lead to invalid or skipped events.
Use mutex to check for one event at a time or do post-processing.
In addition to mutex-based locking use specific event as signal.
Closes#5156
Load long values correctly (e.g. for http_code).
Use curl_off_t (not long) for:
- size_download (CURLINFO_SIZE_DOWNLOAD_T)
- size_upload (CURLINFO_SIZE_UPLOAD_T)
The unit for these values is bytes/second, not microseconds:
- speed_download (CURLINFO_SPEED_DOWNLOAD_T)
- speed_upload (CURLINFO_SPEED_UPLOAD_T)
Fixes#5131Closes#5152
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
