If a URL is given with a zero-length host name, like in "http://:80" or
just ":80", `fix_hostname()` will index the host name pointer with a -1
offset (as it blindly assumes a non-zero length) and both read and
assign that address.
CVE-2015-3144
Bug: http://curl.haxx.se/docs/adv_20150422D.html
Reported-by: Hanno Böck
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
The following functions return immediately if a null pointer was passed.
* Curl_cookie_cleanup
* curl_formfree
It is therefore not needed that a function caller repeats a corresponding check.
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
When checking for a connection to re-use, a proxy-using request must
check for and use a proxy connection and not one based on the host
name!
Added test 1421 to verify
Bug: http://curl.haxx.se/bug/view.cgi?id=1492
SSL_CTX_load_verify_locations by default (and if given non-Null
parameters) searches the CAfile first and falls back to CApath. This
allows for CAfile to be a basis (e.g. installed by the package manager)
and CApath to be a user configured directory.
This wasn't reflected by the previous configure constraint which this
patch fixes.
Bug: https://github.com/bagder/curl/pull/139
This option can be used to enable/disable certificate status verification using
the "Certificate Status Request" TLS extension defined in RFC6066 section 8.
This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the
certificate status verification fails, and the Curl_ssl_cert_status_request()
function, used to check whether the SSL backend supports the status_request
extension.
There was a confusion between these: this commit tries to disambiguate them.
- Scope can be computed from the address itself.
- Scope id is scope dependent: it is currently defined as 1-based local
interface index for link-local scoped addresses, and as a site index(?) for
(obsolete) site-local addresses. Linux only supports it for link-local
addresses.
The URL parser properly parses a scope id as an interface index, but stores it
in a field named "scope": confusion. The field has been renamed into "scope_id".
Curl_if2ip() used the scope id as it was a scope. This caused failures
to bind to an interface.
Scope is now computed from the addresses and Curl_if2ip() matches them.
If redundantly specified in the URL, scope id is check for mismatch with
the interface index.
This commit should fix SF bug #1451.
This fixes the test 506 torture test. The internal cookie API really
ought to be improved to separate cookie parsing errors (which may be
ignored) with OOM errors (which should be fatal).
As Windows based autoconf builds don't yet define USE_WIN32_CRYPTO
either explicitly through --enable-win32-cypto or automatically on
_WIN32 based platforms, subsequent builds broke with the following
error message:
"Can't compile NTLM support without a crypto library."
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and
cryptography weren't disabled, and either a supporting cryptography
library or Windows SSPI was being compiled against.
This means it was not possible to build libcurl without HTTP support
and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather
than introduce a new SASL pre-processor definition, removed the HTTP
prerequisite just like USE_SPNEGO and USE_KRB5.
Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP
as it is only available to HTTP at present.
This bug dates back to August 2011 when I started to add support for
NTLM to SMTP.
When duplicating a handle, the data to post was duplicated using
strdup() when it could be binary and contain zeroes and it was not even
zero terminated! This caused read out of bounds crashes/segfaults.
Since the lib/strdup.c file no longer is easily shared with the curl
tool with this change, it now uses its own version instead.
Bug: http://curl.haxx.se/docs/adv_20141105.html
CVE: CVE-2014-3707
Reported-By: Symeon Paraschoudis
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
Coverity CID 1202836. If the proxy environment variable returned an empty
string, it would be leaked. While an empty string is not really a proxy, other
logic in this function already allows a blank string to be returned so allow
that here to avoid the leak.
This was done to make sure NTLM state that is bound to a connection
doesn't survive and gets used for the subsequent request - but
disconnects can also be done to for example make room in the connection
cache and thus that connection is not strictly related to the easy
handle's current operation.
The http authentication state is still kept in the easy handle since all
http auth _except_ NTLM is connection independent and thus survive over
multiple connections.
Bug: http://curl.haxx.se/mail/lib-2014-08/0148.html
Reported-by: Paras S
Problem: if CURLOPT_FORBID_REUSE is set, requests using NTLM failed
since NTLM requires multiple requests that re-use the same connection
for the authentication to work
Solution: Ignore the forbid reuse flag in case the NTLM authentication
handshake is in progress, according to the NTLM state flag.
Fixed known bug #77.
The URL is not a property of the connection so it should not be freed in
the connection disconnect but in the Curl_close() that frees the easy
handle.
Bug: http://curl.haxx.se/mail/lib-2014-08/0148.html
Reported-by: Paras S
Bringing back the old functionality that was mistakenly removed when the
connection cache was remade. When creating a new connection, all the
existing ones are checked and those that are known to be dead get
disconnected for real and removed from the connection cache. It helps
the cache from holding on to very many stale connections and aids in
keeping down the number of system sockets in wait states.
Help-by: Jonatan Vela <jonatan.vela@ergon.ch>
Bug: http://curl.haxx.se/mail/lib-2014-06/0189.html
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
When an error has been detected, skip the final forced call to the
progress callback by making sure to pass the current return code
variable in the Curl_done() call in the CURLM_STATE_DONE state.
This avoids the "extra" callback that could occur even if you returned
error from the progress callback.
Bug: http://curl.haxx.se/mail/lib-2014-06/0062.html
Reported by: Jonathan Cardoso Machado
The static connection counter caused a race condition. Moving the
connection id counter into conncache solves it, as well as simplifying
the related logic.
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
Depending on compiler line 3505 could generate the following warning or
error:
* warning: ISO C90 forbids mixed declarations and code
* A declaration cannot appear after an executable statement in a block
* error C2275: 'size_t' : illegal use of this type as an expression
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
In addition to FTP, other connection based protocols such as IMAP, POP3,
SMTP, SCP, SFTP and LDAP require a new connection when different log-in
credentials are specified. Fixed the detection logic to include these
other protocols.
Bug: http://curl.haxx.se/docs/adv_20140326A.html
Port number zero is perfectly allowed to connect to. I moved to storing
the remote port number in an int so that -1 means undefined and 0-65535
can be used for legitimate port numbers.
When allowing NTLM, the re-use connection logic was too focused on
finding an existing NTLM connection to use and didn't properly allow
re-use of other ones. This made the logic not re-use perfectly re-usable
connections.
Added test case 1418 and 1419 to verify.
Regression brought in 8ae35102c (curl 7.35.0)
Reported-by: Jeff King
Bug: http://thread.gmane.org/gmane.comp.version-control.git/242213
Make sure that the special NTLM magic we do is for HTTP+NTLM only since
that's where the authenticated connection is a weird non-standard
paradigm.
Regression brought in 8ae35102c (curl 7.35.0)
Bug: http://curl.haxx.se/mail/lib-2014-02/0100.html
Reported-by: Dan Fandrich
when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.
TODO: honor this option with GnuTLS and OpenSSL
Removed some of the infof() calls that were added with the recent
pipeline improvements but they're not useful to the vast majority of
readers and the pipelining seems to fundamentaly work - the debugging
outputs can easily be added there if debugging these functions is needed
again.
When the requested authentication bitmask includes NTLM, we cannot
re-use a connection for another username/password as we then risk
re-using NTLM (connection-based auth).
This has the unfortunate downside that if you include NTLM as a possible
auth, you cannot re-use connections for other usernames/passwords even
if NTLM doesn't end up the auth type used.
Reported-by: Paras S
Patched-by: Paras S
Bug: http://curl.haxx.se/mail/lib-2014-01/0046.html
Following commit 0aafd77fa4, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
Rather than set the authentication options as part of the login details
specified in the URL, or via the older CURLOPT_USERPWD option, added a
new libcurl option to allow the login options to be set separately.
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
This is a regression since the switch to always-multi internally
c43127414d.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
Otherwise, the FTP protocol would unnecessarily hang 60 seconds if
aborted in the CURLOPT_HEADERFUNCTION callback.
Reported by: Tomas Mlcoch
Bug: https://bugzilla.redhat.com/1005686
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
option CURLOPT_XOAUTH2_BEARER for authentication using RFC6749 "OAuth
2.0 Authorization Framework".
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
libcurl quietly truncates usernames, passwords, and options from
before an '@' sign in a URL to 255 (= MAX_CURL_PASSWORD_LENGTH - 1)
characters to fit in fixed-size buffers on the stack. Allocate a
buffer large enough to fit the parsed fields on the fly instead to
support longer passwords.
After this change, there are no more uses of MAX_CURL_OPTIONS_LENGTH
left, so stop defining that constant while at it. The hardcoded max
username and password length constants, on the other hand, are still
used in HTTP proxy credential handling (which this patch doesn't
touch).
Reported-by: Colby Ranger
Instead of nesting "if(success)" blocks and leaving the reader in
suspense about what happens in the !success case, deal with failure
cases early, usually with a simple goto to clean up and return from
the function.
No functional change intended. The main effect is to decrease the
indentation of this function slightly.
libcurl truncates usernames, passwords, and options set with
curl_easy_setopt to 255 (= MAX_CURL_PASSWORD_LENGTH - 1) characters.
This doesn't affect the return value from curl_easy_setopt(), so from
the caller's point of view, there is no sign anything strange has
happened, except that authentication fails.
For example:
# Prepare a long (300-char) password.
s=0123456789; s=$s$s$s$s$s$s$s$s$s$s; s=$s$s$s;
# Start a server.
nc -l -p 8888 | tee out & pid=$!
# Tell curl to pass the password to the server.
curl --user me:$s http://localhost:8888 & sleep 1; kill $pid
# Extract the password.
userpass=$(
awk '/Authorization: Basic/ {print $3}' <out |
tr -d '\r' |
base64 -d
)
password=${userpass#me:}
echo ${#password}
Expected result: 300
Actual result: 255
The fix is simple: allocate appropriately sized buffers on the heap
instead of trying to squeeze the provided values into fixed-size
on-stack buffers.
Bug: http://bugs.debian.org/719856
Reported-by: Colby Ranger
libcurl truncates usernames and passwords it reads from .netrc to
LOGINSIZE and PASSWORDSIZE (64) characters without any indication to
the user, to ensure the values returned from Curl_parsenetrc fit in a
caller-provided buffer.
Fix the interface by passing back dynamically allocated buffers
allocated to fit the user's input. The parser still relies on a
256-character buffer to read each line, though.
So now you can include an ~246-character password in your .netrc,
instead of the previous limit of 63 characters.
Reported-by: Colby Ranger
Instead of remembering before each "return" statement which temporary
allocations, if any, need to be freed, take care to set pointers to
NULL when no longer needed and use a goto to a common block to exit
the function and free all temporaries.
No functional change intended. Currently the only temporary buffer in
this function is "proxy" which is already correctly freed when
appropriate, but there will be more soon.
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function
and CURLOPT_PROGRESSFUNCTION is considered deprecated.
This new callback uses pure 'curl_off_t' arguments to pass on full
resolution sizes. It otherwise retains the same characteristics: the
same call rate, the same meanings for the arguments and the return code
is used the same way.
The progressfunc.c example is updated to show how to use the new
callback for newer libcurls while supporting the older one if built with
an older libcurl or even built with a newer libcurl while running with
an older.
RFC3986 details how a path part passed in as part of a URI should be
"cleaned" from dot sequences before getting used. The described
algorithm is now implemented in lib/dotdot.c with the accompanied test
case in test 1395.
Bug: http://curl.haxx.se/bug/view.cgi?id=1200
Reported-by: Alex Vinnik
When performing COOKIELIST operations the cookie lock needs to be taken
for the cases where the cookies are shared among multiple handles!
Verified by Benjamin Gilbert's updated test 506
Bug: http://curl.haxx.se/bug/view.cgi?id=1215
Reported-by: Benjamin Gilbert
... in order to prevent an artificial timeout event based on stale
speed-check data from a previous network transfer. This commit fixes
a regression caused by 9dd85bced5.
Bug: https://bugzilla.redhat.com/906031
Fixed an issue in parse_proxy(), introduced in commit 11332577b3,
where an empty username or password (For example: http://:@example.com)
would cause a crash.
There is no need to perform separate clearing of data if a NULL option
pointer is passed in. Instead this operation can be performed by simply
not calling parse_login_details() and letting the rest of the code do
the work.
setstropt_userpwd() was calling setstropt() in commit fddb7b44a7 to
set each of the login details which would duplicate the strings and
subsequently cause a memory leak.
In addition to parsing the optional login options from the URL, added
support for parsing them from CURLOPT_USERPWD, to allow the following
supported command line:
--user username:password;options
Added bounds checking when searching for the separator characters within
the login string as this string may not be NULL terminated (For example
it is the login part of a URL). We do this in preference to allocating a
new string to copy the login details into which could then be passed to
parse_login_details() for performance reasons.
As well as parsing the username and password from the URL, added support
for parsing the optional options part from the login details, to allow
the following supported URL format:
schema://username:password;options@example.com/path?q=foobar
This will only be used by IMAP, POP3 and SMTP at present but any
protocol that may be given login options in the URL will be able to
add support for them.
Previously it only compared credentials if the requested needle
connection wasn't using a proxy. This caused NTLM authentication
failures when using proxies as the authentication code wasn't send on
the connection where the challenge arrived.
Added test 1215 to verify: NTLM server authentication through a proxy
(This is a modified copy of test 67)
At some point recently we lost the default value for the easy handle's
connection cache, and this change puts it back to 5 - which is the
former default value and it is documented in the curl_easy_setopt.3 man
page.
curl has been accepting URLs using slightly wrong syntax for a long
time, such as when completely missing as slash "http://example.org" or
missing a slash when a query part is given
"http://example.org?q=foobar".
curl would translate these into a legitimate HTTP request to servers,
although as was shown in bug #1206 it was not adjusted properly in the
cases where a HTTP proxy was used.
Test 1213 and 1214 were added to the test suite to verify this fix.
The test HTTP server was adjusted to allow us to specify test number in
the host name only without using any slashes in a given URL.
Bug: http://curl.haxx.se/bug/view.cgi?id=1206
Reported by: ScottJi
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
Always interprets the pointer passed with the CURLOPT_WRITEDATA or
CURLOPT_READDATA options of curl_easy_setopt() as a void pointer in
order to avoid problems in environments where FILE and void pointers
have non-trivial conversion.
This bug report properly identified that when doing SMTP and aborting
the transfer with a callback, it must be considered aborted prematurely
by the code to avoid QUIT etc to be attempted as that would cause a
hang.
The new test case 1507 verifies this behavior.
Reported by: Patricia Muscalu
Bug: http://curl.haxx.se/bug/view.cgi?id=1184
When a connection is no longer used, it is kept in the cache. If the
cache is full, the oldest idle connection is closed. If no connection is
idle, the current one is closed instead.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
Fixes initial proxy response being processed by the tunneled protocol
handler instead of the HTTP wrapper handler. This issue would trigger
upon delayed CONNECT response from the proxy.
Additionally fixes a multi interface code-path in which connections
would not time out properly.
This does not fix known bug #39.
URL: http://curl.haxx.se/mail/lib-2013-01/0191.html
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
A bundle is a list of all persistent connections to the same host.
The connection cache consists of a hash of bundles, with the
hostname as the key.
The benefits may not be obvious, but they are two:
1) Faster search for connections to reuse, since the hash
lookup only finds connections to the host in question.
2) It lays out the groundworks for an upcoming patch,
which will introduce multiple HTTP pipelines.
This patch also removes the awkward list of "closure handles",
which were needed to send QUIT commands to the FTP server
when closing a connection.
Now we allocate a separate closure handle and use that
one to close all connections.
This has been tested in a live system for a few weeks, and of
course passes the test suite.
The existing logic only cut off the fragment from the separate 'path'
buffer which is used when sending HTTP to hosts. The buffer that held
the full URL used for proxies were not dealt with. It is now.
Test case 5 was updated to use a fragment on a URL over a proxy.
Bug: http://curl.haxx.se/bug/view.cgi?id=3579813
After a research team wrote a document[1] that found several live source
codes out there in the wild that misused the CURLOPT_SSL_VERIFYHOST
option thinking it was a boolean, this change now bans 1 as a value and
will make libcurl return error for it.
1 was never a sensible value to use in production but was introduced
back in the days to help debugging. It was always documented clearly
this way.
1 was never supported by all SSL backends in libcurl, so this cleanup
makes the treatment of it unified.
The report's list of mistakes for this option were all PHP code and
while there's a binding layer between libcurl and PHP, the PHP team has
decided that they have an as thin layer as possible on top of libcurl so
they will not alter or specifically filter a 'TRUE' value for this
particular option. I sympathize with that position.
[1] = http://daniel.haxx.se/blog/2012/10/25/libcurl-claimed-to-be-dangerous/
When given a string as 'srp' it didn't work, but required 'SRP'.
Starting now, the check disregards casing.
Bug: http://curl.haxx.se/bug/view.cgi?id=3578418
Reported by: Jeff Connelly
Selected socks proxy in Google's Chrome browser. Resulting in the
following environment variables:
NO_PROXY=localhost,127.0.0.0/8
ALL_PROXY=socks://localhost:1080/
all_proxy=socks://localhost:1080/
no_proxy=localhost,127.0.0.0/8
... and libcurl didn't treat 'socks://' as socks but instead picked HTTP
proxy.
Reported by: Scott Bailey
Bug: http://curl.haxx.se/bug/view.cgi?id=3566860
I suspect this is a regression introduced in commit 207cf150, included
since 7.24.0.
Avoid showing '(nil)' as hostname in verbose output by making sure the
hostname fixup function is called early enough to set the pointers that
are used for this. The name data is set again for each request even for
re-used connections to handle multiple hostnames over the same
connection (like with proxy) or that the casing etc of the host name is
changed between requests (which has proven to be important at least once
in the past).
Test1011 was modified to use a redirect with a re-used a connection
since it then showed the bug and now lo longer does. There's currently
no easy way to have the test suite detect 'nil' texts in verbose ouputs
so no tests will detect if this problem gets reintroduced.
Bug: http://curl.haxx.se/mail/lib-2012-07/0111.html
Reported by: Gisle Vanem
Since Curl_pgrsDone() itself calls Curl_pgrsUpdate() which may return an
abort instruction or similar we need to return that info back and
subsequently properly handle return codes from Curl_pgrsDone() where
used.
(Spotted by a Coverity scan)
Roman Mamedov spotted (in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126) that curl would
not complain when given a URL with an IPv6 numerical address without
brackets. It would simply cut off the last ":[hex]" part and thus not
work correctly.
That's a URL using an illegal syntax and now libcurl will instead return
a clear error code and error message detailing the error.
The above mentioned bug report claims this to be a regression but
libcurl does not guarantee functionality when given URLs that aren't
following the URL spec (RFC3986 mostly). I consider the fact that it
used to handle this differently a mere coincidence.
The refactoring of HTTP CONNECT handling in commit 41b0237834 that
made it protocol independent broke it for the multi interface. This fix
now introduce a better state handling and moved some logic to the
http_proxy.c source file.
Reported by: Yang Tse
Bug: http://curl.haxx.se/mail/lib-2012-03/0162.html
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
... by making sure that the string is always freed after the invoke as
parse_proxy will always copy the data and this way there's a single
free() instead of multiple ones.
The proxy parser function strips off trailing slashes off the proxy name
which could lead to a mistaken zero length proxy name which would be
treated as no proxy at all by subsequent functions!
This is now detected and an error is returned. Verified by the new test
1329.
Reported by: Chandrakant Bagul
Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly
clear it.
Verified with the new test 598
Bug: http://curl.haxx.se/bug/view.cgi?id=3481551
Reported by: Michael Day
Using a URL with embedded user name and password didn't work if the host
was given as a numerical IPv6 string, like ftp://user:password@[::1]/
Reported by: Brandon Wang
Bug: http://curl.haxx.se/mail/archive-2012-01/0047.html
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
In the recent do_more fix the new logic was mistakenly checking the
pointer instead of what it points to.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
CURLOPT_RESOLVE populates the DNS cache with entries that are marked as
eternally in use. Those entries need to be taken care of when the cache
is killed off.
Bug: http://curl.haxx.se/bug/view.cgi?id=3463121
Reported by: "tw84452852"
Backpedaled out the funny double-change of state in the multi state
machine by adding a new argument to the do_more() function to signal
completion. This way it can remain in the DO_MORE state properly until
done. Long term, the entire DO_MORE logic should be moved into the FTP
code and be hidden from the multi code as the logic is only used for
FTP.
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
Regression introduced in 7.23.0 with commit 9dd85bce. The function in
which the PRETRANSFER time stamp was recorded was moved in time causing
it be stored very quickly after the start timestamp. On most systems
shorter than 1 millisecond and thus it wouldn't even show with -w
"%{time_pretransfer}" using the command line tool.
Bug: http://curl.haxx.se/mail/archive-2011-12/0022.html
Reported by: Toni Moreno
Fixed the connection reuse detection in ConnectionExists() when
comparing a new connection that is non-SSL based against that of a SSL
based connection that has become so by being upgraded via TLS.
This is a regression since who knows when. When spotting that a HTTP
proxy is used we must not uncondititionally enable the HTTP protocol
since if we do tunneling through the proxy we're still using the target
protocol.
Reported by: Naveen Chandran
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the
protocol will get the "query part" of the URL cut off before the data is
handled by the protocol-specific code. This makes libcurl adhere to
RFC3986 section 2.2.
Test 1220 is added to verify a file:// URL with query-part.
Regression: commit b998d95b (shipped first in release 7.22.0) made the
condition always equal false that should reset the TIMER_CONNECT timer
and call the Curl_verboseconnect() function.
Reported by: "Captain Basil"
Bug: http://curl.haxx.se/mail/archive-2011-11/0035.html
Now called 'use_ssl' instead, which better matches the current CURLOPT
name and since the option is used for all pingpong protocols (at least)
it makes sense to not use 'ftp' in the name.
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
When the progress function returns to cancel the request, we must mark
the connection to get closed and it must do to the DONE state.
do_init() must be called as early as possible so that state variables
for new connections are reset early. We could otherwise see that the old
values were still there when a connection was to be disconnected very
early and it would make it behave wrongly.
Bug: http://curl.haxx.se/mail/lib-2011-10/0006.html
Reported by: Vladimir Grishchenko
Just internal stuff...
Curl_safefree is now a macro defined in memdebug.h instead of a function
prototyped in url.h and implemented in url.c, so inclusion of url.h is no
longer required in order to simply use Curl_safefree.
Provide definition of macro WHILE_FALSE in setup_once.h in order to allow
other macros such as DEBUGF and DEBUGASSERT, and code using it, to compile
without 'conditional expression is constant' warnings.
The WHILE_FALSE stuff fixes 150+ MSVC compiler warnings.
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
When using the multi interface, a SOCKS proxy, and a connection that
wouldn't immediately consider itself connected (which my Linux tests do
by default), libcurl would be tricked into doing _two_ connects to the
SOCKS proxy when it setup the data connection and then of course the
second attempt would fail miserably and cause error.
This problem is a regression that was introduced by commit
4a42e5cdaa that was introduced in the 7.21.7 release.
Bug: http://curl.haxx.se/mail/lib-2011-08/0199.html
Reported by: Fabian Keil
A proxy could be marked 'httpproxy' wrongly before if set with an
environment variable or with the CURLOPT_PROXY option with a socks*://
prefix or similar.
Added test 710 to verify
Bug: http://curl.haxx.se/mail/lib-2011-07/0194.html
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE
for Samba's winbind daemon ntlm_auth helper code implementation and filename.
Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature
availability implementation independent.
For test harness, prefix NTLM_AUTH environment vars with CURL_
Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
When closing a connection, the speedchecker's timestamp is now deleted
so that it cannot accidentally be used by a fresh connection on the same
handle when examining the transfer speed.
Bug: https://bugzilla.redhat.com/679709
When switching to HTTP because a HTTP proxy is being used, the existing
handler is now checked if it already is "compatible". This allows the https
handler remain while other non-http handlers will be redirected.
Bug: http://curl.haxx.se/mail/lib-2011-05/0214.html
Reported by: Jerome Robert
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
The protocol handler's flags field now can set that the protocol
requires a password, so that the set_userpass function doesn't have to
have the specific knowledge of which protocols that do.
Made several functions static
Made one function defined to nothing when RTSP is disabled to avoid
the #ifdefs in code.
Removed explicit rtsp.h includes
Using 'socks5h' as proxy protocol will make it a
CURLPROXY_SOCKS5_HOSTNAME proxy which is SOCKS5 and asking the proxy to
resolve host names. I found no "standard" protocol name for this.
