The internal buffer in infof() is limited to 2048 bytes of payload plus
an additional byte for NULL termination. Servers with very long error
messages can however cause truncation of the string, which currently
isn't very clear, and leads to badly formatted output.
This appends a "...\n" (or just "..." in case the format didn't with a
newline char) marker to the end of the string to clearly show
that it has been truncated.
Also include a unittest covering infof() to try and catch any bugs
introduced in this quite important function.
Closes#3216
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
When not actually following the redirect and the target URL is only
stored for later retrieval, curl always accepted "non-supported"
schemes. This was a regression from 46e164069d.
Reported-by: Brad King
Fixes#3210Closes#3215
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
To make it only send one DoH request and avoid the race condition that
could lead to the requests getting sent in reversed order and thus
making it hard to compare in the test case.
Fixes#3107Closes#3108
The value in question is coming directly from `gnutls-serv`, so it cannot
be modified freely.
Reported-by: Marcel Raad
Ref: 6ae6b2a533 (commitcomment-30621004)
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
In order for this API to fully work for libcurl itself, it now offers a
CURLU_GUESS_SCHEME flag that makes it "guess" scheme based on the host
name prefix just like libcurl always did. If there's no known prefix, it
will guess "http://".
Separately, it relaxes the check of the host name so that IDN host names
can be passed in as well.
Both these changes are necessary for libcurl itself to use this API.
Assisted-by: Daniel Gustafsson
Closes#3018
The previous test certificates contained RSA keys of only 1024 bits.
However, RSA claims that 1024-bit RSA keys are likely to become
crackable some time before 2010. The NIST recommends at least 2048-bit
keys for RSA for now.
Better use full 2048 also for testing.
Closes#2973
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
... and add "MAILINDEX".
As described in #2789, this is a suggested solution. Changing UID=xx to
actually get mail with UID xx and add "MAILINDEX" to get a mail with a
special index in the mail box (old behavior). So MAILINDEX=1 gives the
first non deleted mail in the mail box.
Fixes#2789Closes#2815
Transparently. The related curl_multi_setopt() options all still returns
OK when pipelining is selected.
To re-enable the support, the single line change in lib/multi.c needs to
be reverted.
See docs/DEPRECATE.md
Closes#2705
According to RFC6265 section 5.4, cookies with equal path lengths
SHOULD be sorted by creation-time (earlier first). This adds a
creation-time record to the cookie struct in order to make cookie
sorting more deterministic. The creation-time is defined as the
order of the cookies in the jar, the first cookie read fro the
jar being the oldest. The creation-time is thus not serialized
into the jar. Also remove the strcmp() matching in the sorting as
there is no lexicographic ordering in RFC6265. Existing tests are
updated to match.
Closes#2524
All these tests failed on Windows because something like
sftp://%HOSTIP:%SSHPORT%PWD/
expanded to
sftp://127.0.0.1:1234c:/msys64/home/bla/curl
and then curl complained about the port number ending with a letter.
Use the original POSIX path instead of the Windows path created in
checksystem to fix this.
Closes https://github.com/curl/curl/pull/2920
Since GOPHER support was added in curl `?' character was automatically
translated to `%09' (`\t').
However, this behaviour does not seems documented in RFC 4266 and for
search selectors it is documented to directly use `%09' in the URL.
Apart that several gopher servers in the current gopherspace have CGI
support where `?' is used as part of the selector and translating it to
`%09' often leads to surprising results.
Closes#2910
Modifying the locale with environment variables doesn't work for native
Windows applications. Just disable the test in this case if the decimal
separator is something different than a point. Use a precheck with a
small C program to achieve that.
Closes https://github.com/curl/curl/pull/2786
... simply because this is usually a sign of the user having omitted the
file name and the next option is instead "eaten" by the parser as a file
name.
Add test1268 to verify
Closes#2885
Deal with tiny "HTTP/0.9" (header-less) responses by checking the
status-line early, even before a full "HTTP/" is received to allow
detecting 0.9 properly.
Test 1266 and 1267 added to verify.
Fixes#2420Closes#2872
Turns out that since we're using the native fnmatch function now when
available, and they simply disagree on a huge number of test patterns
that make it hard to test this function like this...
Fixes#2825
Otherwise, LF line endings are converted to CRLF on Windows,
but no conversion is done for the reply, so the test case fails.
Closes https://github.com/curl/curl/pull/2776
When the application just started the transfer and then stops it while
the name resolve in the background thread hasn't completed, we need to
wait for the resolve to complete and then cleanup data accordingly.
Enabled test 1553 again and added test 1590 to also check when the host
name resolves successfully.
Detected by OSS-fuzz.
Closes#1968
This avoids appending error data to already existing good data.
Test 92 is updated to match this change.
New test 1156 checks all combinations of --range/--resume, --fail,
Content-Range header and http status code 200/416.
Fixes#1163
Reported-By: Ithubg on github
Closes#2578
The feature is only enabled if the output is believed to be a tty.
-J: There's some minor differences and improvements in -J handling, as
now J should work with -i and it actually creates a file first using the
initial name and then *renames* that to the one found in
Content-Disposition (if any).
-i: only shows headers for HTTP transfers now (as documented).
Previously it would also show for pieces of the transfer that were HTTP
(for example when doing FTP over a HTTP proxy).
-i: now shows trailers as well. Previously they were not shown at all.
--libcurl: the CURLOPT_HEADER is no longer set, as the header output is
now done in the header callback.
RFC 6265 section 4.2.1 does not set restrictions on cookie names.
This is a follow-up to commit 7f7fcd0.
Also explicitly check proper syntax of cookie name/value pair.
New test 1155 checks that cookie names are not reserved words.
Reported-By: anshnd at github
Fixes#2564Closes#2566
... and make test 1026 rely on that feature so that --disable-manual
builds don't cause test failures.
Reported-by: Max Dymond and Anders Roxell
Fixes#2533Closes#2540
- Move verify_certificate functionality in schannel.c into a new
file called schannel_verify.c. Additionally, some structure defintions
from schannel.c have been moved to schannel.h to allow them to be
used in schannel_verify.c.
- Make verify_certificate functionality for Schannel available on
all versions of Windows instead of just Windows CE. verify_certificate
will be invoked on Windows CE or when the user specifies
CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER.
- In verify_certificate, create a custom certificate chain engine that
exclusively trusts the certificate store backed by the CURLOPT_CAINFO
file.
- doc updates of --cacert/CAINFO support for schannel
- Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString
when available. This implements a TODO in schannel.c to improve
handling of multiple SANs in a certificate. In particular, all SANs
will now be searched instead of just the first name.
- Update tool_operate.c to not search for the curl-ca-bundle.crt file
when using Schannel to maintain backward compatibility. Previously,
any curl-ca-bundle.crt file found in that search would have been
ignored by Schannel. But, with CAINFO support, the file found by
that search would have been used as the certificate store and
could cause issues for any users that have curl-ca-bundle.crt in
the search path.
- Update url.c to not set the build time CURL_CA_BUNDLE if the selected
SSL backend is Schannel. We allow setting CA location for schannel
only when explicitly specified by the user via CURLOPT_CAINFO /
--cacert.
- Add new test cases 3000 and 3001. These test cases check that the first
and last SAN, respectively, matches the connection hostname. New test
certificates have been added for these cases. For 3000, the certificate
prefix is Server-localhost-firstSAN and for 3001, the certificate
prefix is Server-localhost-secondSAN.
- Remove TODO 15.2 (Add support for custom server certificate
validation), this commit addresses it.
Closes https://github.com/curl/curl/pull/1325
curl 7.57.0 and up interpret this according to Appendix E.3.2 of RFC
8089 but then returns an error saying this is unimplemented. This is
actually a regression in behavior on both Windows and Unix.
Before curl 7.57.0 this URL was treated as a path of "//foo/bar" and
then passed to the relevant OS API. This means that the behavior of this
case is actually OS dependent.
The Unix path resolution rules say that the OS must handle swallowing
the extra "/" and so this path is the same as "/foo/bar"
The Windows path resolution rules say that this is a UNC path and
automatically handles the SMB access for the program. So curl on Windows
was already doing Appendix E.3.2 without any special code in curl.
Regression
Closes#2438
This fixes a segfault occurring when a name of the (invalid) form "domain..tld"
is processed.
test46 updated to cover this case.
Follow-up to commit c990ead.
Ref: https://github.com/curl/curl/pull/2440
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Test 319 checks proper raw mode data with non-chunked gzip
transfer-encoded server data.
Test 326 checks raw mode with chunked server data.
Bug: #2303Closes#2308
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
If CURL_DOES_CONVERSION is enabled, uploaded LFs are mapped to CRLFs,
giving a result that is different from what is expected.
This commit avoids using CURLOPT_TRANSFERTEXT and directly encodes data
to upload in ascii.
Bug: https://github.com/curl/curl/pull/1872
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
vtls.c:multissl_init() might do a curl_free() call so strip that out to
make this work with more builds. We just want to verify that
memorytracking works so skipping one line is no harm.
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
- When zlib version is < 1.2.0.4, process gzip trailer before considering
extra data as an error.
- Inflate with Z_BLOCK instead of Z_SYNC_FLUSH to maximize correct data
and minimize corrupt data output.
- Do not try to restart deflate decompression in raw mode if output has
started or if the leading data is not available anymore.
- New test 232 checks inflating raw-deflated content.
Closes#2068
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
For pop3/imap/smtp, added test 891 to somewhat verify the pop3
case.
For this, I enhanced the pingpong test server to be able to send back
responses with LF-only instead of always using CRLF.
Closes#2150
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Host names like "127.0.0.1 moo" would otherwise be accepted by some
getaddrinfo() implementations.
Updated test 1034 and 1035 accordingly.
Fixes#2073Closes#2092
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
This reverts commit f3e03f6c0a.
Caused memory leaks in the fuzzer, needs to be done differently.
Disable test 1553 for now too, as it causes memory leaks without this
commit!
When imap_done() got called before a connection is setup, it would try
to "finish up" and dereffed a NULL pointer.
Test case 1553 managed to reproduce. I had to actually use a host name
to try to resolve to slow it down, as using the normal local server IP
will make libcurl get a connection in the first curl_multi_perform()
loop and then the bug doesn't trigger.
Fixes#1953
Assisted-by: Max Dymond
... fixes a memory leak with at least IMAP when remove_handle is never
called and the transfer is abruptly just abandoned early.
Test 1552 added to verify
Detected by OSS-fuzz
Assisted-by: Max Dymond
Closes#1954
... a single double quote could leave the entry path buffer without a zero
terminating byte. CVE-2017-1000254
Test 1152 added to verify.
Reported-by: Max Dymond
Bug: https://curl.haxx.se/docs/adv_20171004.html
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
... as the test cases themselves do that and it makes it easier to add
crazy test cases.
Test 800 updated to use user name + password that need quoting.
Test 856 updated to trigger an auth fail differently.
Ref: #1902
... instead of truncating them.
There's no fixed limit for acceptable cookie names in RFC 6265, but the
entire cookie is said to be less than 4096 bytes (section 6.1). This is
also what browsers seem to implement.
We now allow max 5000 bytes cookie header. Max 4095 bytes length per
cookie name and value. Name + value together may not exceed 4096 bytes.
Added test 1151 to verify
Bug: https://curl.haxx.se/mail/lib-2017-09/0062.html
Reported-by: Kevin Smith
Closes#1894
The stub implementation is pre-loaded using LD_PRELOAD
and emulates common gssapi uses (only builds if curl is
initially built with gssapi support).
The initial tests are currently disabled for debug builds
as LD_PRELOAD is not used then.
Ref: https://github.com/curl/curl/pull/1687
Now that the form API is deprecated and not used anymore in curl tool,
a lot of its features left untested. Test 650 attempts to check all these
features not tested elsewhere.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
Additional mime-specific tests.
Existing tests updated to reflect small differences (Expect: 100-continue,
data size change due to empty lines, etc).
Option -F headers= keyword added to tests.
test1135 disabled until the entry point order change is resolved.
New example smtp-mime.
Examples postit2 and multi-post converted from form API to mime API.
Let's add a compile time safe API to select an SSL backend. This
function needs to be called *before* curl_global_init(), and can be
called only once.
Side note: we do not explicitly test that it is called before
curl_global_init(), but we do verify that it is not called multiple times
(even implicitly).
If SSL is used before the function was called, it will use whatever the
CURL_SSL_BACKEND environment variable says (or default to the first
available SSL backend), and if a subsequent call to
curl_global_sslset() disagrees with the previous choice, it will fail
with CURLSSLSET_TOO_LATE.
The function also accepts an "avail" parameter to point to a (read-only)
NULL-terminated list of available backends. This comes in real handy if
an application wants to let the user choose between whatever SSL backends
the currently available libcurl has to offer: simply call
curl_global_sslset(-1, NULL, &avail);
which will return CURLSSLSET_UNKNOWN_BACKEND and populate the avail
variable to point to the relevant information to present to the user.
Just like with the HTTP/2 push functions, we have to add the function
declaration of curl_global_sslset() function to the header file
*multi.h* because VMS and OS/400 require a stable order of functions
declared in include/curl/*.h (where the header files are sorted
alphabetically). This looks a bit funny, but it cannot be helped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fixes
$ valgrind --leak-check=full ~/install-curl-git/bin/curl tftp://localhost/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaz
==9752== Memcheck, a memory error detector
==9752== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==9752== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright info
==9752== Command: /home/even/install-curl-git/bin/curl tftp://localhost/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaz
==9752==
curl: (71) TFTP file name too long
==9752==
==9752== HEAP SUMMARY:
==9752== 505 bytes in 1 blocks are definitely lost in loss record 11 of 11
==9752== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==9752== by 0x4E61CED: Curl_urldecode (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E75868: tftp_state_machine (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E761B6: tftp_do (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E711B6: multi_runsingle (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E71D00: curl_multi_perform (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E6950D: curl_easy_perform (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x40E0B7: operate_do (in /home/even/install-curl-git/bin/curl)
==9752== by 0x40E849: operate (in /home/even/install-curl-git/bin/curl)
==9752== by 0x402693: main (in /home/even/install-curl-git/bin/curl)
Fixes https://oss-fuzz.com/v2/testcase-detail/5232311106797568
Credit to OSS Fuzz
Closes#1808
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
... since CURLOPT_URL should follow the same rules as other options:
they remain set until changed or cleared.
Added test 1551 to verify.
Fixes#1631Closes#1632
Reported-by: Pavel Rochnyak
Prevent `Curl_pgrsTime` from modifying `t_starttransfer` when invoked
with `TIMER_STARTTRANSFER` more than once during a single request.
When a redirect occurs, this is considered a new request and
`t_starttransfer` can be updated to reflect the `t_starttransfer` time
of the redirect request.
Closes#1616
Bug: https://github.com/curl/curl/pull/1602#issuecomment-310267370
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
The list was freed incorrectly since the llist refactor of
cbae73e1dd. Added test 1550 to verify that it works and avoid future
regressions.
Reported-by: Pascal Terjan
Fixes#1584Closes#1585
... unless "--output -" is used. Binary detection is done by simply
checking for a binary zero in early data.
Added test 1425 1426 to verify.
Closes#1512
Both these tests run the same underlying test code: libntlmconnect.c -
this test code made some assumptions about socket ordering when it used
curl_easy_fdset() and when we changed timing or got accidental changes
in libcurl the tests would fail.
The tests verify that the different transfers keep using the same
connections, which I now instead made sure by adding the number of bytes
each transfer gets and then verifies that they always get the same
amount as when these tests worked.
Closes#1576
mk-lib1521.pl generates a test program (lib1521.c) that calls
curl_easy_setopt() for every known option with a few typical values to
make sure they work (ignoring the return codes).
Some small changes were necessary to avoid asserts and NULL accesses
when doing this.
The perl script needs to be manually rerun when we add new options.
Closes#1543
Also removed a TODO suggesting caching the precheck results. Tests
showed this would save about 0.1 sec on the total test run time on a
relatively modern system, an unnoticeable gain at the cost of longer and
more complicated code. There would also be a danger that a cached test
result would be inappropriately returned, such as when other test
dependencies (like environment variables) are different or when the
precheck causes side effects (like filesystem changes).
@MarcelRaad noted that `test1399` causes infinite loop on MinGW.
Looking into this, seems like it is related to how Windows handles
CRLF. See https://github.com/curl/curl/commit/9e093f by @mback2k.
Removing `test1399` as it's identical to `test1326` then with such a
fix.
Test 1399 was broughy by commit 862b02f894Closes#1478
Include the test number in the names of files written out by tests to
reduce the chance of accidental duplication and to make it more clear
which test is associated with which file.
Windows does not allow setting the locale with environment variables (as
the test attempted to do), so the test failed when run with a user
locale that has a comma as radixchar. Changed the test to call
setlocale() explicitly to ensure that a known working locale is set even
on Windows.
Previous TODO wanting to write in chunks. We should support writing more
at once since some TELNET servers may respond immediately upon first
byte written such as WHOIS servers.
Closes#1389
Test command 'time curl http://localhost/80GB -so /dev/null' on a Debian
Linux.
Before (middle performing run out 9):
real 0m28.078s
user 0m11.240s
sys 0m12.876s
After (middle performing run out 9)
real 0m26.356s (93.9%)
user 0m5.324s (47.4%)
sys 0m8.368s (65.0%)
Also, doing SFTP over a 200 millsecond latency link is now about 6 times
faster.
Closes#1446
This checks the new behavior of Curl_splaygetbest, so that the smallest
node not larger than the key is removed, and FIFO behavior is kept even
when there are multiple nodes with the same key.
Closes#1358
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes#1373
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
Depend on the known behaviour of URLs for nonexistent files rather than
the undefined behaviour of URLs for directories (which fails on Windows).
The test isn't about file: URLs at all, so the URL used doesn't really
matter.
If a % ended the statement, the string's trailing NUL would be skipped
and memory past the end of the buffer would be accessed and potentially
displayed as part of the --write-out output. Added tests 1440 and 1441
to check for this kind of condition.
Reported-by: Brian Carpenter
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
Test 1903 is doing HTTP pipelining, and that is a timing and ordering
sensitive operation and this fails far too often on the Travis CI
leading to people more or less ignoring test failures there. Not good.
The end of pipelning is probably coming sooner rather than later
anyway...
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
The character set in POSIX is set by the locale defined by (in
decreasing order of precedence) the LC_ALL, LC_CTYPE and LANG
environment variables (CHARSET was used by libidn but not libidn2).
LC_ALL is cleared to ensure that LC_CTYPE takes effect, but LC_ALL is
not used to set the locale to ensure that other parts of the locale
aren't overridden. Since there doesn't seem to be a cross-platform way
of specifying a UTF-8 locale, and not all systems may support UTF-8, a
<precheck> is used to skip the test if UTF-8 can't be verified to be
available. Test 1035 was also converted to UTF-8 for consistency, as
the actual character set used there is irrelevant to the test.
This patch uses a different UTF-8 locale than the last attempt, namely
en_US.UTF-8. This one has been verified on 7 different Linux and BSD
distributions and is more complete and usable than the locale UTF-8 (on
at least some systems).
This reverts commit ecd1d020ab.
That commit caused test failures on my Debian Linux machine for all
changed test cases. We need to reconsider how that should get done.
Character set in POSIX is set by the locale defined (in decreasing order
of precedence) by the LC_ALL, LC_CTYPE and LANG environment variables (I
believe CHARSET is only historic). LC_ALL is cleared to ensure that
LC_CTYPE takes effect, but LC_ALL is not used to set the locale to
ensure that other parts of the locale aren't overriden, if set. Since
there doesn't seem to be a cross-platform way of specifying a UTF-8
locale, and not all systems may support UTF-8, a <precheck> is used
(where relevant) to skip the test if UTF-8 isn't in use. Test 1035 was
also converted to UTF-8 for consistency, as the actual character set
used there is irrelevant to the test.
- on the first invocation: keep security context returned by
InitializeSecurityContext()
- on subsequent invocations: use MakeSignature() instead of
InitializeSecurityContext() to generate HTTP digest response
Bug: https://github.com/curl/curl/issues/870
Reported-by: Andreas Roth
Closes https://github.com/curl/curl/pull/1251
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
This repairs cookies for localhost.
Non-PSL builds will now only accept "localhost" without dots, while PSL
builds okeys everything not listed as PSL.
Added test 1258 to verify.
This was a regression brought in a76825a5ef
Under condition using http_proxy env var, noproxy list was the
combination of --noproxy option and NO_PROXY env var previously. Since
this commit, --noproxy option overrides NO_PROXY environment variable
even if use http_proxy env var.
Closes#1140
The combination of --noproxy option and http_proxy env var works well
both for proxied hosts and non-proxied hosts.
However, when combining NO_PROXY env var with --proxy option,
non-proxied hosts are not reachable while proxied host is OK.
This patch allows us to access non-proxied hosts even if using NO_PROXY
env var with --proxy option.
Follow-up to 3463408.
Prior to 3463408 file:// hostnames were silently stripped.
Prior to this commit it did not work when a schemeless url was used with
file as the default protocol.
Ref: https://curl.haxx.se/mail/lib-2016-11/0081.html
Closes https://github.com/curl/curl/pull/1124
Also fix for drive letters:
- Support --proto-default file c:/foo/bar.txt
- Support file://c:/foo/bar.txt
- Fail when a file:// drive letter is detected and not MSDOS/Windows.
Bug: https://github.com/curl/curl/issues/1187
Reported-by: Anatol Belski
Assisted-by: Anatol Belski
Follow-up to 82245ea: Fix the example program sendrecv.c (handle
CURLE_AGAIN, handle incomplete send). Improve the documentation
for curl_easy_recv() and curl_easy_send().
Reviewed-by: Frank Meier
Assisted-by: Jay Satiro
See https://github.com/curl/curl/pull/1134
A server MUST NOT send any Transfer-Encoding or Content-Length header
fields in a 2xx (Successful) response to CONNECT. (RFC 7231 section
4.3.6)
Also fixes the three test cases that did this.
If a port number in a "connect-to" entry does not match, skip this
entry instead of connecting to port 0.
If a port number in a "connect-to" entry matches, use this entry
and look no further.
Reported-by: Jay Satiro
Assisted-by: Jay Satiro, Daniel Stenberg
Closes#1148
We're mostly saying just "curl" in lower case these days so here's a big
cleanup to adapt to this reality. A few instances are left as the
project could still formally be considered called cURL.
- Call Curl_initinfo on init and duphandle.
Prior to this change the statistical and informational variables were
simply zeroed by calloc on easy init and duphandle. While zero is the
correct default value for almost all info variables, there is one where
it isn't (filetime initializes to -1).
Bug: https://github.com/curl/curl/issues/1103
Reported-by: Neal Poole
Cokie with the same domain but different tailmatching property are now
considered different and do not replace each other. If header contains
following lines then two cookies will be set: Set-Cookie: foo=bar;
domain=.foo.com; expires=Thu Mar 3 GMT 8:56:27 2033 Set-Cookie: foo=baz;
domain=foo.com; expires=Thu Mar 3 GMT 8:56:27 2033
This matches Chrome, Opera, Safari, and Firefox behavior. When sending
stored tokens to foo.com Chrome, Opera, Firefox store send them in the
stored order, while Safari pre-sort the cookies.
Closes#1050
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
.. and add that --proto-redir and CURLOPT_REDIR_PROTOCOLS do not
override protocols denied by --proto and CURLOPT_PROTOCOLS.
- Add a test to enforce: --proto deny must override --proto-redir allow
Closes https://github.com/curl/curl/pull/1031
... like when a HTTP/0.9 response comes back without any headers at all
and just a body this now prevents that body from being sent to the
callback etc.
Adapted test 1144 to verify.
Fixes#973
Assisted-by: Ray Satiro
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
This fixes tests that were added after 113f04e664 as the tests would
fail otherwise.
We bring back "Proxy-Connection: Keep-Alive" now unconditionally to fix
regressions with old and stupid proxies, but we could possibly switch to
using it only for CONNECT or only for NTLM in a future if we want to
gradually reduce it.
Fixes#954
Reported-by: János Fekete
The HTTP/2 tests brought with commit bf05606ef1 were using the internal
name 'http2' for the HTTP/2 server, while in fact that name was already
used for the second instance of the HTTP server. This made tests using
the second instance (like test 2050) fail after a HTTP/2 test had run.
The server is now known as HTTP/2 internally and within the <server>
section in test cases. 1700, 1701 and 1702 were updated accordingly.
It requires that 'nghttpx' is in the PATH, and it will run the tests
using nghttpx as a front-end proxy in front of the standard HTTP/1 test
server. This uses HTTP/2 over plain TCP.
If you like me have nghttpx installed in a custom path, you can run test 1700
like this:
$ PATH=$PATH:$HOME/build-nghttp2/bin/ ./runtests.pl 1700
Mostly in order to support broken web sites that redirect to broken URLs
that are accepted by browsers.
Browsers are typically even more leniant than this as the WHATWG URL
spec they should allow an _infinite_ amount. I tested 8000 slashes with
Firefox and it just worked.
Added test case 1141, 1142 and 1143 to verify the new parser.
Closes#791
Prior to this change a width arg could be erroneously output, and also
width and precision args could not be used together without crashing.
"%0*d%s", 2, 9, "foo"
Before: "092"
After: "09foo"
"%*.*s", 5, 2, "foo"
Before: crash
After: " fo"
Test 557 is updated to verify this and more
It does open up a miniscule risk that one of the other protocols that
libcurl could use would send back a Content-Disposition header and then
curl would act on it even if not HTTP.
A future mitigation for this risk would be to allow the callback to ask
libcurl which protocol is being used.
Verified with test 1312
Closes#760
While being debated (in #716) and a violation of RFC 7230 section 5.4,
this test verifies that the existing functionality works as intended. It
strips the dot from the host name and uses the host without dot
throughout the internals.
... for checking ability to receive full HTTP response when POST request
is used with slow read callback function.
This test checks for bug #657 and verifies the work-around from
72d5e144fb.
Closes#720
RFC 6265 section 4.1.1 spells out that the first name/value pair in the
header is the actual cookie name and content, while the following are
the parameters.
libcurl previously had a more liberal approach which causes significant
problems when introducing new cookie parameters, like the suggested new
cookie priority draft.
The previous logic read all n/v pairs from left-to-right and the first
name used that wassn't a known parameter name would be used as the
cookie name, thus accepting "Set-Cookie: Max-Age=2; person=daniel" to be
a cookie named 'person' while an RFC 6265 compliant parser should
consider that to be a cookie named 'Max-Age' with an (unknown) parameter
'person'.
Fixes#709
- Add tests.
- Add an example to CURLOPT_TFTP_NO_OPTIONS.3.
- Add --tftp-no-options to expose CURLOPT_TFTP_NO_OPTIONS.
Bug: https://github.com/curl/curl/issues/481
It turns out Firefox and Chrome both allow spaces in cookie names and
there are sites out there using that.
Turned out the code meant to strip off trailing space from cookie names
didn't work. Fixed now.
Test case 8 modified to verify both these changes.
Closes#639
- Add unit test 1604 to test the sanitize_file_name function.
- Use -DCURL_STATICLIB when building libcurltool for unit testing.
- Better detection of reserved DOS device names.
- New flags to modify sanitize behavior:
SANITIZE_ALLOW_COLONS: Allow colons
SANITIZE_ALLOW_PATH: Allow path separators and colons
SANITIZE_ALLOW_RESERVED: Allow reserved device names
SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename
- Restore sanitization of banned characters from user-specified outfile.
Prior to this commit sanitization of a user-specified outfile was
temporarily disabled in 2b6dadc because there was no way to allow path
separators and colons through while replacing other banned characters.
Now in such a case we call the sanitize function with
SANITIZE_ALLOW_PATH which allows path separators and colons to pass
through.
Closes https://github.com/curl/curl/issues/624
Reported-by: Octavio Schroeder
Before this patch, if a URL does not start with the protocol
name/scheme, effective URLs would be prefixed with upper-case protocol
names/schemes. This behavior might not be expected by library users or
end users.
For example, if `CURLOPT_DEFAULT_PROTOCOL` is set to "https". And the
URL is "hostname/path". The effective URL would be
"HTTPS://hostname/path" instead of "https://hostname/path".
After this patch, effective URLs would be prefixed with a lower-case
protocol name/scheme.
Closes#597
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
The request needs to be read and send in binary mode in order to use
CRLF instead of LF. Adding --upload-file - causes curl to read stdin
in binary mode.
Make this the default for the curl tool (if built with HTTP/2 powers
enabled) unless a specific HTTP version is requested on the command
line.
This should allow more users to get HTTP/2 powers without having to
change anything.
Tests 842, 843, 844, 845, 887, 888, 889, 890, 946, 947, 948 and 949 fail
if a custom port number is specified via the -b option of runtests.pl.
Suggested by: Kamil Dudka
Bug: http://curl.haxx.se/mail/lib-2015-12/0003.html
