CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
RFC3986 details how a path part passed in as part of a URI should be
"cleaned" from dot sequences before getting used. The described
algorithm is now implemented in lib/dotdot.c with the accompanied test
case in test 1395.
Bug: http://curl.haxx.se/bug/view.cgi?id=1200
Reported-by: Alex Vinnik
When sending the HTTP Authorization: header for digest, the user name
needs to be escaped if it contains a double-quote or backslash.
Test 1229 was added to verify
Reported and fixed by: Nach M. S
Bug: http://curl.haxx.se/bug/view.cgi?id=1230
I found a bug which cURL sends cookies to the path not to aim at.
For example:
- cURL sends a request to http://example.fake/hoge/
- server returns cookie which with path=/hoge;
the point is there is NOT the '/' end of path string.
- cURL sends a request to http://example.fake/hogege/ with the cookie.
The reason for this old "feature" is because that behavior is what is
described in the original netscape cookie spec:
http://curl.haxx.se/rfc/cookie_spec.html
The current cookie spec (RFC6265) clarifies the situation:
http://tools.ietf.org/html/rfc6265#section-5.2.4
When connecting back to an FTP server after having sent PASV/EPSV,
libcurl sometimes didn't use the proxy properly even though the proxy
was used for the initial connect.
The function wrongly checked for the CURLOPT_PROXY variable to be set,
which made it act wrongly if the proxy information was set with an
environment variable.
Added test case 711 to verify (based on 707 which uses --socks5). Also
added test712 to verify another variation of setting the proxy: with
--proxy socks5://
Bug: http://curl.haxx.se/bug/view.cgi?id=1218
Reported-by: Zekun Ni
...instead of the 220 we otherwise expect.
Made the ftpserver.pl support sending a custom "welcome" and then
created test 1219 to verify this fix with such a 230 welcome.
Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html
Reported by: Anders Havn
Accessing a file with an absolute path in the root dir but with no
directory specified was not handled correctly. This fix comes with four
new test cases that verify it.
Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html
Reported by: Sam Deane
... and make 1216 also verify it with a file input
These tests verify commit 3604fde3d3c9b0d, the fix for the "cookie
domain tailmatch" vulnerability. See
http://curl.haxx.se/docs/adv_20130412.html
Previously it only compared credentials if the requested needle
connection wasn't using a proxy. This caused NTLM authentication
failures when using proxies as the authentication code wasn't send on
the connection where the challenge arrived.
Added test 1215 to verify: NTLM server authentication through a proxy
(This is a modified copy of test 67)
Modified sws to support and use custom CONNECT responses instead of the
previously naive hard-coded version. Made the HTTP test server able to
extract test case number from the host name in a CONNECT request by
finding the number after the last dot. It makes 'machine.moo.123' use
test case 123.
Adapted a larger amount of tests to the new <connect> style.
Bug: http://curl.haxx.se/bug/view.cgi?id=1204
Reported by: Martin Jansen
These verfy that the 'memory tracking' subsystem is actually doing its
job when using curl tool (#96), a test in libtest (#558) and also a unit
test (#1330), in order to prevent regressions in this functionallity.
curl has been accepting URLs using slightly wrong syntax for a long
time, such as when completely missing as slash "http://example.org" or
missing a slash when a query part is given
"http://example.org?q=foobar".
curl would translate these into a legitimate HTTP request to servers,
although as was shown in bug #1206 it was not adjusted properly in the
cases where a HTTP proxy was used.
Test 1213 and 1214 were added to the test suite to verify this fix.
The test HTTP server was adjusted to allow us to specify test number in
the host name only without using any slashes in a given URL.
Bug: http://curl.haxx.se/bug/view.cgi?id=1206
Reported by: ScottJi
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
The majority of lines, that specify a test file for inclusion, end with
a tab character before the slash whilst some end with a space. Corrected
those that end with a space to end with a tab character as well.
Continued segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Continued segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
Started segregating the email protocol tests, into their own protocol
based ranges, in preparation of adding more e-mail related tests to the
test suite.
This bug report properly identified that when doing SMTP and aborting
the transfer with a callback, it must be considered aborted prematurely
by the code to avoid QUIT etc to be attempted as that would cause a
hang.
The new test case 1507 verifies this behavior.
Reported by: Patricia Muscalu
Bug: http://curl.haxx.se/bug/view.cgi?id=1184
When a connection is no longer used, it is kept in the cache. If the
cache is full, the oldest idle connection is closed. If no connection is
idle, the current one is closed instead.
- document the double-quote and backslash need be escaped if quoting.
- libcurl formdata escape double-quote in filename by backslash.
- curl formparse can parse filename both contains '"' and ',' or ';'.
- curl now can uploading file with ',' or ';' in filename.
Bug: http://curl.haxx.se/bug/view.cgi?id=1171
lib/objnames.inc provides definition of curl_10char_object_name() shell
function. The intended purpose of this function is to transliterate a
(*.c) source file name that may be longer than 10 characters, or not,
into a string with at most 10 characters which may be used as an OS/400
object name.
Test case 1221 does unit testng of this function and also verifies
that it is possible to generate distinct short object names for all
curl and libcurl *.c source file names.
lib/objnames-test.sh is the shell script used for test case 1221.
tests/runtests.pl modified to accept shell script test cases.
More details inside lib/objnames.inc and lib/objnames-test.sh
