HTTP auth "accidentally" worked before this cleanup since the code would
always overwrite the connection credentials with the credentials from
the most recent transfer and since HTTP auth is typically done first
thing, this has not been an issue. It was still wrong and subject to
possible race conditions or future breakage if the sequence of functions
would change.
The data.set.str[] strings MUST remain unmodified exactly as set by the
user, and the credentials to use internally are instead set/updated in
state.aptr.*
Added test 675 to verify different credentials used in two requests done
over a reused HTTP connection, which previously behaved wrongly.
Fixes#6542Closes#6545
Rename it to 'httpwant' and make a cloned field in the state struct as
well for run-time updates.
Also: refuse non-supported HTTP versions. Verified with test 129.
Closes#6585
and rename it from 'ftp_list_only' since it is also used for SSH and
POP3. The state is updated internally for 'type=D' FTP URLs.
Added test case 1570 to verify.
Closes#6578
... and make sure the code never updates 'set.prefer_ascii' as it breaks
handle reuse which should use the setting as the user specified it.
Added test 1569 to verify: it first makes an FTP transfer with ';type=A'
and then another without type on the same handle and the second should
then use binary. Previously, curl failed this.
Closes#6578
- Deduplicate the logic used by write-out and write-out json.
Rather than have separate writeLong, writeString, etc, logic for
each of write-out and write-out json instead have respective shared
functions that can output either format and a 'use_json' parameter to
indicate whether it is json that is output.
This will make it easier to maintain. Rather than have to go through
two sets of logic now we only have to go through one.
- Support write-out %{errormsg} and %{exitcode} in json.
- Clarify in the doc that %{exitcode} is the exit code of the transfer.
Prior to this change it just said "The numerical exitcode" which
implies it's the exit code of the tool, and it's not necessarily that.
Closes https://github.com/curl/curl/pull/6544
This is useful for tests containing HTML inside of <data> sections.
For <img> tags it's not uncommon to be longer than the previous
limit of 79 bytes.
An example of a previously problem-causing tag is:
<img src="http://config.privoxy.org/send-banner?type=auto" border="0" title="Killed-http://www.privoxy.org/images/privoxy.png-by-size" width="88" height="31">
which is needed for a Privoxy test for the banners-by-size filter.
Previously it caused server failures like:
12:29:05.786961 ====> Client connect
12:29:05.787116 accept_connection 3 returned 4
12:29:05.787194 accept_connection 3 returned 0
12:29:05.787285 Read 119 bytes
12:29:05.787345 Process 119 bytes request
12:29:05.787407 Got request: GET /banners-by-size/9 HTTP/1.1
12:29:05.787464 Requested test number 9 part 0
12:29:05.787686 getpart() failed with error: -2
12:29:05.787744 - request found to be complete (9)
12:29:05.787912 getpart() failed with error: -2
12:29:05.788048 Wrote request (119 bytes) input to log/server.input
12:29:05.788157 Send response test9 section <data>
12:29:05.788443 getpart() failed with error: -2
12:29:05.788498 instructed to close connection after server-reply
12:29:05.788550 ====> Client disconnect 0
12:29:05.871448 exit_signal_handler: 15
12:29:05.871714 signalled to die
12:29:05.872040 ========> IPv4 sws (port 21108 pid: 51758) exits with signal (15)
runtests.pl has lots of internal variables one might want to
change in certain situations, but adding a dedicated option
for every single one of them isn't practical.
Usage:
./runtests.pl -o TESTDIR=$privoxy_curl_test_dir -o HOSTIP=10.0.0.1 ...
- show the summarized test result in the last line of the report
- do not use $_ after mapping it to a named variable
Doing that makes the code harder to follow.
- log the restraints sorted by the number of their occurrences
- fix language when logging restraints that only occured once
- let runhttpserver() use $TESTDIR instead of $srcdir
... so it works if a non-default $TESTDIR is being used.
It can contain additional restraints for test numbers,
keywords and tools.
The idea is to let third parties like the Privoxy project
distribute an exclude file with their tarballs that specifies
which curl tests are not expected to work when using Privoxy
as a proxy, without having to fork the whole curl test suite.
The syntax could be changed to be extendable and maybe
more closely reflect the "curl test" syntax. Currently
it's a bunch of lines like these:
test:$TESTNUMBER:Reason why this test with number $TESTNUMBER should be skipped
keyword:$KEYWORD:Reason why tests whose keywords contain the $KEYWORD should be skipped
tool:$TOOL:Reason why tests with tools that contain $TOOL should be skipped
To specify multiple $TESTNUMBERs, $KEYWORDs and $TOOLs
on a single line, split them with commas.
This is useful to change the behaviour of the script without
having to modify the file itself, for example to use a custom
compareparts() function that ignores header differences that
are expected to occur when an external proxy is being used.
Such differences are proxy-specific and thus the modifications
should be maintained together with the proxy.
... that should be used when executing the tests.
The assumption is that the proxy is an HTTP proxy.
This option should be used together with -L to provide
a customized compareparts() version that knows which
proxy-specific header differences should be ignored.
This option doesn't work for all test types yet.
missing CRs and modified %hostip
lib556/test556: use a real HTTP version to make test reuse more convenient
make sure the weekday in Date headers matches the date
test61: replace stray "^M" (5e 4d) at the end of a cookie with a '^M' (0d)
Gets the test working with external proxies like Privoxy again.
Closes#6463
... as we ignore it anyway because servers don't report the correct size
and proftpd even blatantly returns a 550.
Updates a set of tests accordingly.
Reported-by: awesomenode on github
Fixes#6564Closes#6565
- Add support services without region and service prefixes in
the URL endpoint (ex. Min.IO, GCP, Yandex Cloud, Mail.Ru Cloud Solutions, etc)
by providing region and service parameters via aws-sigv4 option.
- Add [:region[:service]] suffix to aws-sigv4 option;
- Fix memory allocation errors.
- Refactor memory management.
- Use Curl_http_method instead() STRING_CUSTOMREQUEST.
- Refactor canonical headers generating.
- Remove repeated sha256_to_hex() usage.
- Add some docs fixes.
- Add some codestyle fixes.
- Add overloaded strndup() for debug - curl_dbg_strndup().
- Update tests.
Closes#6524
- Pass the very long request header via file instead of command line.
Prior to this change the 49k very long request header string was passed
via command line and on Windows that is too long so it was truncated and
the test would fail (specifically msys CI).
Closes https://github.com/curl/curl/pull/6516
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... and as a practical side-effect, make sure that the
Curl_easyopts_check() function is asserted in debug builds, which we
want to detect mismatches between the options list in easyoptions.c and
the options in curl.h
Found-by: Gisle Vanem
Bug: 08e8455ddd (commitcomment-45991815)Closes#6461
... so that a function can first use MIMEPOST and then set it to NULL to
reset it back to a blank POST.
Added test 584 to verify the fix.
Reported-by: Christoph M. Becker
Fixes#6455Closes#6456
... so that Retry-After and other meta-content can still be used.
Added 1634 to verify. Adjusted test 194 and 281 since --fail now also
includes the header-terminating CRLF in the output before it exits.
Fixes#6408Closes#6409
... to make build tools/valgrind warn if no curl_global_cleanup is
called.
This is conditionally only done for debug builds with the env variable
CURL_GLOBAL_INIT set.
Closes#6410
When doing HTTP authentication and a port number set with CURLOPT_PORT,
the code would previously have the URL's port number override as if it
had been a redirect to an absolute URL.
Added test 1568 to verify.
Reported-by: UrsusArctos on github
Fixes#6397Closes#6400
We currently use both spellings the british "behaviour" and the american
"behavior". However "behavior" is more used in the project so I think
it's worth dropping the british name.
Closes#6395
Extend the syntax of CURLOPT_RESOLVE strings: allow using a '+' prefix
(similar to the existing '-' prefix for removing entries) to add
DNS cache entries that will time out just like entries that are added
by libcurl itself.
Append " (non-permanent)" to info log message in case a non-permanent
entry is added.
Adjust relevant comments to reflect the new behavior.
Adjust documentation.
Extend unit1607 to test the new functionality.
Closes#6294
This option sets the (octal) mode to use for the remote file when one is
created, using the SFTP, SCP or FILE protocols. When not set, the
default is 0644.
Closes#6244
Use -v as the first option to enable verbose mode which will show source
input, extracted symbol and line info. For example:
Source: ./../include/curl/typecheck-gcc.h
Symbol: curlcheck_socket_info(info)
Line #423: #define curlcheck_socket_info(info) \
Ref: https://curl.se/mail/lib-2020-12/0084.html
Closes https://github.com/curl/curl/pull/6349
When the initial request isn't possible to send in its entirety, the
remainder of request would be delivered to the debug callback as data
and would wrongly be counted internally as body-bytes sent.
Extended test 1295 to verify.
Closes#6328
... to make tests run differently or expect different results depending
on what features that are present or not in curl.
Bonus: initial minor 'Hyper' awareness but nothing is using that yet
Closes#6304
The command line tool also independently sets --ftp-skip-pasv-ip by
default.
Ten test cases updated to adapt the modified --libcurl output.
Bug: https://curl.se/docs/CVE-2020-8284.html
CVE-2020-8284
Reported-by: Varnavas Papaioannou
... as it makes the URL parser accept "very-long-hostname://" as a valid
host name and we don't want that. The parser now only accepts a blank
(no digits) after the colon if the URL starts with a scheme.
Reported-by: d4d on hackerone
Closes#6283
Backporting the Python 3 implementation of setStream
to ClosingFileHandler as a fallback within Python 2.
Reported-by: Jay Satiro
Fixes#6259Closes#6270
Commit c353207 removed the closing right after do_tftp
which covered the case of abort. This handles that case.
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Follow up to #6209Closes#6234
Make sure uploaded file is no longer locked after the
transfer while waiting for the final ACK to be handled.
Assisted-by: Daniel Stenberg
Bug: #6058Closes#6209
Make sure the log file is not locked once a test has
finished and align with the behavior of our logmsg.
Rename curl_test_data.py to be a general util.py.
Format and sort Python imports with isort/VSCode.
Bug: #6058Closes#6206
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
- Add regex that strips http/2 server header name to those http/2 tests
that don't already have it.
- Improve that regex in all http/2 tests.
Tests 358 and 359 were failing for me before this change on a system
that uses an older version of nghttpx which includes its version number
in the server header.
Closes https://github.com/curl/curl/pull/6139
... to make sure such tests are run with valgrind. Suppress the zstd
valgrind warnings we get with version 1.3.3 on Ubuntu 18.04 (for debug
and non-debug builds).
Closes#6105
... and remove the objnames scripts they tested. They're not used for
anything anymore so testing them serves no purpose!
Reported-by: Marc Hörsken
Fixes#6080Closes#6081
Update appveyor.yml to set env variable TFLAGS and run tests
Remove curly braces due to CMake error (${TFLAGS} -> $TFLAGS)
Move testdeps build to build step (per review comments)
Reviewed-by: Marc Hörsken
Closes#6066Fixes#6052
Avoid using our own, potentially installed, curl for
the test reporting APIs in case it is broken.
Reviewed-by: Daniel Stenberg
Preparation for #6049Closes#6063
... and use this new keywords in all the test files larger than 50K to reduce
their sizes and make them a lot easier to read and understand.
Closes#6040
Added test 348 to verify. Added a 'STOR' command to the test FTP
server to enable test 348. Documented the command in FILEFORMAT.md
Reported-by: Duncan Wilcox
Fixes#6016Closes#6017
When using HTTPS proxy, SSL is used but not in the view of the FTP
protocol handler itself so separate the connection's use of SSL from the
FTP control connection's sue.
Reported-by: Mingtao Yang
Fixes#5523Closes#6006
This is primarily interesting for cases where CURLOPT_NOBODY is set as
previously curl would not return an error for this case.
MDTM getting 550 now also returns this error (it returned
CURLE_FTP_COULDNT_RETR_FILE before) in order to unify return codes for
missing files across protocols and specific FTP commands.
libcurl already returns error on a 550 as a MDTM response (when
CURLOPT_FILETIME is set). If CURLOPT_NOBODY is not set, an error would
happen subsequently anyway since the RETR command would fail.
Add test 1913 and 1914 to verify. Updated several tests accordingly due
to the updated SIZE behavior.
Reported-by: Tomas Berger
Fixes#5953Closes#5957
configure --enable-debug now enables -Wassign-enum with clang,
identifying several enum "abuses" also fixed.
Reported-by: Gisle Vanem
Bug: 879007f811 (commitcomment-42087553)Closes#5929
To ease identification of tests the test number is added to
the test case title in order to have it on the Azure DevOps
Analytics pages and reports which currently do not show it.
Bump test case revision to make Azure DevOps update titles.
Closes#5927
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
A shared connection cache is not thread-safe is a known issue. Stop
testing this until we believe this issue is addressed. Reduces
occasional test failures we don't care about.
The test code in lib1541.c is left in git to allow us to restore it when
we get to fix this.
Closes#5922
Remove the tests 530, 584, 1900, 1901, 1902, 1903 and 2033. They were
previously disabled.
The Pipelining code was removed from curl in commit 2f44e94efb,
April 2019.
Closes#5921
IPv6, telnet and now also the multi API require WinSock
version 2 which is available starting with Windows 95.
Therefore we think it is time to drop support for version 1.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Reviewed-by: Viktor Szakats
Follow up to #5634Closes#5854
Since we already use the base64 package since a while back, we can just
as well switch to that here too.
It also happens to use the exact same function name, which otherwise
causes a run-time warning.
Reported-by: Marc Hörsken
Fixes#5885Closes#5887
Learn from the way Cygwin handles and maps the WinSock events
to simulate correct and complete poll and select behaviour
according to Richard W. Stevens Network Programming book.
Follow up to #5867Closes#5879
