If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
This change introduces new alternatives for the existing six
curl_easy_getinfo() options that return sizes or speeds as doubles. The
new versions are named like the old ones but with an appended '_T':
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T
CURLINFO_CONTENT_LENGTH_UPLOAD_T
CURLINFO_SIZE_DOWNLOAD_T
CURLINFO_SIZE_UPLOAD_T
CURLINFO_SPEED_DOWNLOAD_T
CURLINFO_SPEED_UPLOAD_T
Closes#1511
The list was freed incorrectly since the llist refactor of
cbae73e1dd. Added test 1550 to verify that it works and avoid future
regressions.
Reported-by: Pascal Terjan
Fixes#1584Closes#1585
... the previous code would reset the header length wrongly (since
5113ad0424). This makes test 1060 reliable again.
Also: make sws send even smaller chunks of data to increase the
likeliness of this happening.
- No longer allow partial downloads of certdata.
Prior to this change partial downloads were (erroneously?) allowed since
only the server code was checked to be 200.
Bug: https://github.com/curl/curl/pull/1577
Reported-by: Matteo B.
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes#1505
When this define was set, libcurl would check the environment variable
named CURL_CA_BUNDLE at run-time and use that CA cert bundle. This
feature was only defined by the watcom and m32 makefiles and caused
inconsistent behaviours among libcurls built on different platforms.
The curl tool does already feature its own similar logic and the library
does not really need it, and it isn't documented libcurl behavior. So
this change removes it.
Ref: #1538
This gives us accurate precision and it allows us to avoid storing "no
time" for systems with too low timer resolution as we then bump the time
up to 1 microsecond. Should fix test 573 on windows.
Remove the now unused curlx_tvdiff_secs() function.
Maintains the external getinfo() API with using doubles.
Fixes#1531
With the introduction of expire IDs and the fact that existing timers
can be removed now and thus never expire, the concept with adding a
"latest" timer is not working anymore as it risks to not expire at all.
So, to be certain the timers actually are in line and will expire, the
plain Curl_expire() needs to be used. The _latest() function was added
as a sort of shortcut in the past that's quite simply not necessary
anymore.
Follow-up to 31b39c40cf
Reported-by: Paul Harris
Closes#1555
mk-lib1521.pl generates a test program (lib1521.c) that calls
curl_easy_setopt() for every known option with a few typical values to
make sure they work (ignoring the return codes).
Some small changes were necessary to avoid asserts and NULL accesses
when doing this.
The perl script needs to be manually rerun when we add new options.
Closes#1543
This fixes the following warning with CURL_DISABLE_CRYPTO_AUTH,
as seen in the autobuilds:
curl_sasl.c:417:9: warning: unused variable 'serverdata'
[-Wunused-variable]
cyassl/ssl.h needs the macros from cyassl/options.h, so define them
before including cyassl/ssl.h the first time, which happens in
urldata.h.
This broke the build on Ubuntu Xenial, which comes with WolfSSL 3.4.8
and therefore redefines the symbols from cyassl/options.h instead of
including the header.
Closes https://github.com/curl/curl/pull/1536
... with a strlen() if no size was set, and do this in the pretransfer
function so that the info is set early. Otherwise, the default strlen()
done on the POSTFIELDS data never sets state.infilesize.
Reported-by: Vincas Razma
Bug: #1294
* LDAP: using ldap_bind_s on Windows with methods(BASIC/DIGEST/NTLM/AUTONEG)
* ldap: updated per build options handling
* ldap: fixed logic for auth selection
Fixed a syntax error with setting cache variables (The type and
docstring were missing), resulting in build errors. Quoted the
CURL_CA_PATH and CURL_CA_BUNDLE otherwise the path was written without
quotes in C code, resulting in build errors.
Closes#1503
Signed-off-by: Akhil <akhil.kedia@samsung.com>
.... caused by a typo in the last commit (fixing issue #1504):
memdebug.c: In function ‘curl_fclose’:
memdebug.c:444:3: error: implicit declaration of function
‘DEBUGDEBUGASSERT’ [-Werror=implicit-function-declaration]
Some code (e.g. Curl_fillreadbuffer) assumes that this buffer is not
exceedingly tiny and will break if it is. This same check is already
done at run time in the CURLOPT_BUFFERSIZE option.
The function IsPipeliningPossible() would return TRUE if either
pipelining OR HTTP/2 were possible on a connection, which would lead to
it returning TRUE even for POSTs on HTTP/1 connections.
It now returns a bitmask so that the caller can differentiate which kind
the connection allows.
Fixes#1481Closes#1483
Reported-by: stootill at github
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
When the random seed is purposely made predictable for testing purposes
by using the CURL_ENTROPY environment variable, process that data in an
endian agnostic way so the the initial random seed is the same
regardless of endianness.
- Change Curl_rand to write to a char array instead of int array.
- Add Curl_rand_hex to write random hex characters to a buffer.
Fixes#1315Closes#1468
Co-authored-by: Daniel Stenberg
Reported-by: Michael Kaufmann
SEND_QUAL_ARG2 had to be set, but was never used. Use it in swrite to
avoid warnings about casting away low-level const.
Closes https://github.com/curl/curl/pull/1464
Fix the following warnings when building the tests by using the correct
types:
cast from 'const char *' to 'void *' drops const qualifier
[-Wcast-qual]
implicit conversion changes signedness [-Wsign-conversion]
Previous TODO wanting to write in chunks. We should support writing more
at once since some TELNET servers may respond immediately upon first
byte written such as WHOIS servers.
Closes#1389
Prior to this change it was possible for libcurl to be built with both
Windows' native IDN lib (normaliz) and libidn2 enabled. It appears that
doesn't offer any benefit --and could cause a bug-- since libcurl's IDN
handling is written to use either one but not both.
Bug: https://github.com/curl/curl/issues/1441#issuecomment-297689856
Reported-by: Gisle Vanem
This fixes the following clang warnings:
http2.c:184:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2' [-Werror,-Wmissing-variable-declarations]
http2.c:204:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2_ssl'
[-Werror,-Wmissing-variable-declarations]
clang complains:
curl_rtmp.c:61:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmp' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:81:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpt' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:101:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpe' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:121:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpte' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:141:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmps' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:161:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpts' [-Werror,-Wmissing-variable-declarations]
Fix this by including the header file.
This fixes the following clang warnings:
macro is not used [-Wunused-macros]
will never be executed [-Wunreachable-code]
Closes https://github.com/curl/curl/pull/1448
get_protocol_family() is not defined static even though there is a
static local forward declaration. Let's simply make the definition match
it's declaration.
Bug: https://curl.haxx.se/mail/lib-2017-04/0127.html
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.
Reviewed-by: Kai Engert
Closes#1414
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.
Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
- Track when the cached encrypted data contains only a partial record
that can't be decrypted without more data (SEC_E_INCOMPLETE_MESSAGE).
- Change Curl_schannel_data_pending to return false in such a case.
Other SSL libraries have pending data functions that behave similarly.
Ref: https://github.com/curl/curl/pull/1387
Closes https://github.com/curl/curl/pull/1392
`if(nfds || extra_nfds) {` is followed by `malloc(nfds * ...)`.
If `extra_fs` could be non-zero when `nfds` was zero, then we have
`malloc(0)` which is allowed to return `NULL`. But, malloc returning
NULL can be confusing. In this code, the next line would treat the NULL
as an allocation failure.
It turns out, if `nfds` is zero then `extra_nfds` must also be zero.
The final value of `nfds` includes `extra_nfds`. So the test for
`extra_nfds` is redundant. It can only confuse the reader.
Closes#1439
With -Og, GCC complains:
easy.c:628:7: error: ‘mcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:208:9: note: ‘tok_buf’ was declared here
../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:566:15: note: ‘tok_buf’ was declared here
Fix this by initializing the variables.
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)
Also removed return codes since the llist functions can't fail now.
Test 1300 updated accordingly.
Closes#1435
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
This fixes 3 warnings issued by MinGW:
1. PR_ImportTCPSocket actually has a paramter of type PROsfd instead of
PRInt32, which is 64 bits on Windows. Fixed this by including the
corresponding header file instead of redeclaring the function, which is
supported even though it is in the private include folder. [1]
2. In 64-bit mode, size_t is 64 bits while CK_ULONG is 32 bits, so an explicit
narrowing cast is needed.
3. Curl_timeleft returns time_t instead of long since commit
21aa32d30d.
[1] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSPR/Reference/PR_ImportTCPSocket
Closes https://github.com/curl/curl/pull/1393
ERR_error_string with NULL parameter is not thread-safe. The library
writes the string into some static buffer. Two threads doing this at
once may clobber each other and run into problems. Switch to
ERR_error_string_n which avoids this problem and is explicitly
bounds-checked.
Also clean up some remnants of OpenSSL 0.9.5 around here. A number of
comments (fixed buffer size, explaining that ERR_error_string_n was
added in a particular version) date to when ossl_strerror tried to
support pre-ERR_error_string_n OpenSSLs.
Closes#1424
ssl_session_init was only introduced in version 1.3.8, the penultimate
version. The function only contains a memset, so replace it with that.
Suggested-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1401
The POSIX standard location is <poll.h>. Using <sys/poll.h> results in
warning spam when using the musl standard library.
Closes https://github.com/curl/curl/pull/1406
... because they may include an intermediate certificate for a client
certificate and the intermediate certificate needs to be presented to
the server, no matter if we verify the peer or not.
Reported-by: thraidh
Closes#851
When UNICODE is not defined, the Curl_convert_UTF8_to_tchar macro maps
directly to its argument. As it is declared as a pointer to const and
InitializeSecurityContext expects a pointer to non-const, both MSVC and MinGW
issue a warning about implicitly casting away the const. Fix this by declaring
the variables as pointers to non-const.
Closes https://github.com/curl/curl/pull/1394
Previously, periods of fast speed between periods of slow speed would
not count and could still erroneously trigger a timeout.
Reported-by: Paul Harris
Fixes#1345Closes#1390
Multi handles repeatedly invert the queue of pending easy handles when
used with CURLMOPT_MAX_TOTAL_CONNECTIONS. This is caused by a multistep
process involving Curl_splaygetbest and violates the FIFO property of
the multi handle.
This patch fixes this issue by redefining the "best" node in the
context of timeouts as the "smallest not larger than now", and
implementing the necessary data structure modifications to do this
effectively, namely:
- splay nodes with the same key are now stored in a doubly-linked
circular list instead of a non-circular one to enable O(1)
insertion to the tail of the list
- Curl_splayinsert inserts nodes with the same key to the tail of
the same list
- in case of multiple nodes with the same key, the one on the head of
the list gets selected
- Don't free postponed data on a connection that will be reused since
doing so can cause data loss when pipelining.
Only Windows builds are affected by this.
Closes https://github.com/curl/curl/issues/1380
Safe to silence warning adding time delta of poll, which can trigger on
Windows since sizeof time_t > sizeof long.
warning C4244: '+=' : conversion from 'time_t' to 'long', possible loss
of data
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes#1373
telnet.c(1427,21): warning: comparison of constant 268435456 with
expression of type 'CURLcode' is always false
telnet.c(1433,21): warning: comparison of constant 268435457 with
expression of type 'CURLcode' is always false
Reviewed-by: Jay Satiro
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/issues/1225#issuecomment-290340890Closes#1374
'left' is used as time_t but declared as long.
MinGW complains:
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
Changed the declaration to time_t.
At least under Windows, there is no SIZEOF_LONG, so it evaluates to 0 even
though sizeof(int) == sizeof(long). This should probably have been
CURL_SIZEOF_LONG, but the type of timeout_ms changed from long to time_t
anyway.
This triggered MSVC warning C4668 about implicitly replacing undefined
macros with '0'.
Closes https://github.com/curl/curl/pull/1362
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes#1354Closes#1357
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
- If SSL_get_error is called but no extended error detail is available
then show that SSL_ERROR_* as a string.
Prior to this change there was some inconsistency in that case: the
SSL_ERROR_* code may or may not have been shown, or may have been shown
as unknown even if it was known.
Ref: https://github.com/curl/curl/issues/1300
Closes https://github.com/curl/curl/pull/1348
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
This flag is meant for the current request based on authentication
state, once the request is done we can clear the flag.
Also change auth.multi to auth.multipass for better readability.
Fixes https://github.com/curl/curl/issues/1095
Closes https://github.com/curl/curl/pull/1326
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Michael Kaufmann
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
This fixes assertion error which occurs when redirect is done with 0
length body via HTTP/2, and the easy handle is reused, but new
connection is established due to hostname change:
curl: http2.c:1572: ssize_t http2_recv(struct connectdata *,
int, char *, size_t, CURLcode *):
Assertion `httpc->drain_total >= data->state.drain' failed.
To fix this bug, ensure that http2_handle_stream is called.
Fixes#1286Closes#1302
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
Mark intended fallthroughs with /* FALLTHROUGH */ so that gcc will know
it's expected and won't warn on [-Wimplicit-fallthrough=].
Closes https://github.com/curl/curl/pull/1297
In DarwinSSL the SSLSetPeerDomainName function is used to enable both
sending SNI and verifying the host. When host verification is disabled
the function cannot be called, therefore SNI is disabled as well.
Closes https://github.com/curl/curl/pull/1240
If size_t is 32 bits, MSVC warns:
warning C4310: cast truncates constant value
The warning is harmless as CURL_MASK_SCOFFT gets
truncated to the maximum value of size_t.
If the compile-time CURL_CA_BUNDLE location is defined use it as the
default value for the proxy CA bundle location, which is the same as
what we already do for the regular CA bundle location.
Ref: https://github.com/curl/curl/pull/1257
- Change CURLOPT_PROXY_CAPATH to return CURLE_NOT_BUILT_IN if the option
is not supported, which is the same as what we already do for
CURLOPT_CAPATH.
- Change the curl tool to handle CURLOPT_PROXY_CAPATH error
CURLE_NOT_BUILT_IN as a warning instead of as an error, which is the
same as what we already do for CURLOPT_CAPATH.
- Fix CAPATH docs to show that CURLE_NOT_BUILT_IN is returned when the
respective CAPATH option is not supported by the SSL library.
Ref: https://github.com/curl/curl/pull/1257
The CURLOPT_SSL_VERIFYSTATUS option was not properly handled by libcurl
and thus even if the status couldn't be verified, the connection would
be allowed and the user would not be told about the failed verification.
Regression since cb4e2be7c6
CVE-2017-2629
Bug: https://curl.haxx.se/docs/adv_20170222.html
Reported-by: Marcus Hoffmann
- on the first invocation: keep security context returned by
InitializeSecurityContext()
- on subsequent invocations: use MakeSignature() instead of
InitializeSecurityContext() to generate HTTP digest response
Bug: https://github.com/curl/curl/issues/870
Reported-by: Andreas Roth
Closes https://github.com/curl/curl/pull/1251
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
Builds with axTLS 2.1.2. This then also breaks compatibility with axTLS
< 2.1.0 (the older API)
... and fix the session_id mixup brought in 04b4ee549Fixes#1220
If the NSS code was in the middle of a non-blocking handshake and it
was asked to finish the handshake in blocking mode, it unexpectedly
continued in the non-blocking mode, which caused a FTPS connection
over CONNECT to fail with "(81) Socket not ready for send/recv".
Bug: https://bugzilla.redhat.com/1420327
When removing an easy handler from a multi before it completed its
transfer, and it had pushed streams, it would segfault due to the pushed
counted not being cleared.
Fixed-by: zelinchen@users.noreply.github.comFixes#1249
Using sftp to delete a file with CURLOPT_NOBODY set with a reused
connection would fail as curl expected to get some data. Thus it would
retry the command again which fails as the file has already been
deleted.
Fixes#1243
The information extracted from the server certificates in step 3 is only
used when in verbose mode, and there is no error handling or validation
performed as that has already been done. Only run the certificate
information extraction when in verbose mode and libcurl was built with
verbose strings.
Closes https://github.com/curl/curl/pull/1246
- Remove the SNI disabled when host verification disabled message
since that is incorrect.
- Show a message for legacy versions of Windows <= XP that connections
may fail since those versions of WinSSL lack SNI, algorithms, etc.
Bug: https://github.com/curl/curl/pull/1240
SSL_CTX_add_extra_chain_cert takes ownership of the given certificate
while, despite the similar name, SSL_CTX_add_client_CA does not. Thus
it's best to call SSL_CTX_add_client_CA before
SSL_CTX_add_extra_chain_cert, while the code still has ownership of the
argument.
Closes https://github.com/curl/curl/pull/1236
This repairs cookies for localhost.
Non-PSL builds will now only accept "localhost" without dots, while PSL
builds okeys everything not listed as PSL.
Added test 1258 to verify.
This was a regression brought in a76825a5ef
Replace use of fixed macro BUFSIZE to define the size of the receive
buffer. Reappropriate CURLOPT_BUFFERSIZE to include enlarging receive
buffer size. Upon setting, resize buffer if larger than the current
default size up to a MAX_BUFSIZE (512KB). This can benefit protocols
like SFTP.
Closes#1222
Regression since 1d4202ad, which moved the buffer into a more narrow
scope, but the data in that buffer was used outside of that more narrow
scope.
Reported-by: Dan Fandrich
Bug: https://curl.haxx.se/mail/lib-2017-01/0093.html
curl_addrinfo.c:519:20: error: conversion to ‘curl_socklen_t {aka
unsigned int}’ from ‘long unsigned int’ may alter its value
[-Werror=conversion]
Follow-up to 1d786faee1
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
