Test 319 checks proper raw mode data with non-chunked gzip
transfer-encoded server data.
Test 326 checks raw mode with chunked server data.
Bug: #2303Closes#2308
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
If CURL_DOES_CONVERSION is enabled, uploaded LFs are mapped to CRLFs,
giving a result that is different from what is expected.
This commit avoids using CURLOPT_TRANSFERTEXT and directly encodes data
to upload in ascii.
Bug: https://github.com/curl/curl/pull/1872
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
vtls.c:multissl_init() might do a curl_free() call so strip that out to
make this work with more builds. We just want to verify that
memorytracking works so skipping one line is no harm.
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
- When zlib version is < 1.2.0.4, process gzip trailer before considering
extra data as an error.
- Inflate with Z_BLOCK instead of Z_SYNC_FLUSH to maximize correct data
and minimize corrupt data output.
- Do not try to restart deflate decompression in raw mode if output has
started or if the leading data is not available anymore.
- New test 232 checks inflating raw-deflated content.
Closes#2068
This reverts commit 9ffad8eb13.
It was actually added rather recently in 8e8afa82cb due to a crash
that would otherwise happen in the RTSP code. As I don't think we've
fixed that behavior yet, we better keep this work-around until we have
fixed it better.
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
That data is only ever used by the CURLOPT_INTERLEAVEFUNCTION callback
and that option isn't set or used by the curl tool!
Updates the 9 tests that verify --libcurl
Closes#2167
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
For pop3/imap/smtp, added test 891 to somewhat verify the pop3
case.
For this, I enhanced the pingpong test server to be able to send back
responses with LF-only instead of always using CRLF.
Closes#2150
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Host names like "127.0.0.1 moo" would otherwise be accepted by some
getaddrinfo() implementations.
Updated test 1034 and 1035 accordingly.
Fixes#2073Closes#2092
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
By properly keeping track of the last entry in the list of URLs/uploads
to handle, curl now avoids many meaningless traverses of the list which
speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K
URLs).
Added test 1291, to verify that it doesn't take ages - but we don't have
any detection of "too slow" command in the test suite.
Reported-by: arainchik on github
Fixes#1959Closes#2052
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
This reverts commit f3e03f6c0a.
Caused memory leaks in the fuzzer, needs to be done differently.
Disable test 1553 for now too, as it causes memory leaks without this
commit!
When imap_done() got called before a connection is setup, it would try
to "finish up" and dereffed a NULL pointer.
Test case 1553 managed to reproduce. I had to actually use a host name
to try to resolve to slow it down, as using the normal local server IP
will make libcurl get a connection in the first curl_multi_perform()
loop and then the bug doesn't trigger.
Fixes#1953
Assisted-by: Max Dymond
... fixes a memory leak with at least IMAP when remove_handle is never
called and the transfer is abruptly just abandoned early.
Test 1552 added to verify
Detected by OSS-fuzz
Assisted-by: Max Dymond
Closes#1954
... a single double quote could leave the entry path buffer without a zero
terminating byte. CVE-2017-1000254
Test 1152 added to verify.
Reported-by: Max Dymond
Bug: https://curl.haxx.se/docs/adv_20171004.html
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
... as the test cases themselves do that and it makes it easier to add
crazy test cases.
Test 800 updated to use user name + password that need quoting.
Test 856 updated to trigger an auth fail differently.
Ref: #1902
... instead of truncating them.
There's no fixed limit for acceptable cookie names in RFC 6265, but the
entire cookie is said to be less than 4096 bytes (section 6.1). This is
also what browsers seem to implement.
We now allow max 5000 bytes cookie header. Max 4095 bytes length per
cookie name and value. Name + value together may not exceed 4096 bytes.
Added test 1151 to verify
Bug: https://curl.haxx.se/mail/lib-2017-09/0062.html
Reported-by: Kevin Smith
Closes#1894
The stub implementation is pre-loaded using LD_PRELOAD
and emulates common gssapi uses (only builds if curl is
initially built with gssapi support).
The initial tests are currently disabled for debug builds
as LD_PRELOAD is not used then.
Ref: https://github.com/curl/curl/pull/1687
Now that the form API is deprecated and not used anymore in curl tool,
a lot of its features left untested. Test 650 attempts to check all these
features not tested elsewhere.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
Additional mime-specific tests.
Existing tests updated to reflect small differences (Expect: 100-continue,
data size change due to empty lines, etc).
Option -F headers= keyword added to tests.
test1135 disabled until the entry point order change is resolved.
New example smtp-mime.
Examples postit2 and multi-post converted from form API to mime API.
Let's add a compile time safe API to select an SSL backend. This
function needs to be called *before* curl_global_init(), and can be
called only once.
Side note: we do not explicitly test that it is called before
curl_global_init(), but we do verify that it is not called multiple times
(even implicitly).
If SSL is used before the function was called, it will use whatever the
CURL_SSL_BACKEND environment variable says (or default to the first
available SSL backend), and if a subsequent call to
curl_global_sslset() disagrees with the previous choice, it will fail
with CURLSSLSET_TOO_LATE.
The function also accepts an "avail" parameter to point to a (read-only)
NULL-terminated list of available backends. This comes in real handy if
an application wants to let the user choose between whatever SSL backends
the currently available libcurl has to offer: simply call
curl_global_sslset(-1, NULL, &avail);
which will return CURLSSLSET_UNKNOWN_BACKEND and populate the avail
variable to point to the relevant information to present to the user.
Just like with the HTTP/2 push functions, we have to add the function
declaration of curl_global_sslset() function to the header file
*multi.h* because VMS and OS/400 require a stable order of functions
declared in include/curl/*.h (where the header files are sorted
alphabetically). This looks a bit funny, but it cannot be helped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fixes
$ valgrind --leak-check=full ~/install-curl-git/bin/curl tftp://localhost/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaz
==9752== Memcheck, a memory error detector
==9752== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==9752== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright info
==9752== Command: /home/even/install-curl-git/bin/curl tftp://localhost/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaz
==9752==
curl: (71) TFTP file name too long
==9752==
==9752== HEAP SUMMARY:
==9752== 505 bytes in 1 blocks are definitely lost in loss record 11 of 11
==9752== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==9752== by 0x4E61CED: Curl_urldecode (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E75868: tftp_state_machine (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E761B6: tftp_do (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E711B6: multi_runsingle (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E71D00: curl_multi_perform (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x4E6950D: curl_easy_perform (in /home/even/install-curl-git/lib/libcurl.so.4.4.0)
==9752== by 0x40E0B7: operate_do (in /home/even/install-curl-git/bin/curl)
==9752== by 0x40E849: operate (in /home/even/install-curl-git/bin/curl)
==9752== by 0x402693: main (in /home/even/install-curl-git/bin/curl)
Fixes https://oss-fuzz.com/v2/testcase-detail/5232311106797568
Credit to OSS Fuzz
Closes#1808
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
