(http://curl.haxx.se/bug/view.cgi?id=1603712) which is about connections
getting cut off prematurely when --limit-rate is used. While I found no such
problems in my tests nor in my reading of the code, I found that the
--limit-rate code was severly flawed (since it was moved into the lib, since
7.15.5) when used with the easy interface and it didn't work as documented so
I reworked it somewhat and now it works for my tests.
passing a curl_off_t argument to the Curl_read_rewind() function which takes
an size_t argument. Curl_read_rewind() also had debug code left in it and it
was put in a different source file with no good reason when only used from
one single spot.
header in a third, not suppported by libcurl, format and we agreed that we
could make the parser more forgiving to accept all the three found
variations.
responded with a single status line and no headers nor body. Starting now, a
HTTP response on a persistent connection (i.e not set to be closed after the
response has been taken care of) must have Content-Length or chunked
encoding set, or libcurl will simply assume that there is no body.
To my horror I learned that we had no less than 57(!) test cases that did bad
HTTP responses like this, and even the test http server (sws) responded badly
when queried by the test system if it is the test system. So although the
actual fix for the problem was tiny, going through all the newly failing test
cases got really painful and boring.
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
could very well cause a negate number get passed in and thus cause reading
outside of the array usually used for this purpose.
We avoid this by using the uppercase macro versions introduced just now that
does some extra crazy typecasts to avoid byte codes > 127 to cause negative
int values.
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
with re-used FTP connections. If the second request on the same connection was
set not to fetch a "body", libcurl could get confused and consider it an
attempt to use a dead connection and would go acting mighty strange.
connection setup as a follow-redirect. It turns out 1) this fails when a FTP
connection is re-setup and 2) it does make the max-redirs counter behave
wrong. This fix was not verified since the reporter vanished, but I believe
this is the right fix nonetheless.
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(http://curl.haxx.se/bug/view.cgi?id=1299181) that identified a silly problem
with Content-Range: headers with the 'bytes' keyword written in a different
case than all lowercase! It would cause a segfault!
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
CURLOPT_COOKIEFILE), add a cookie (with CURLOPT_COOKIELIST), tell it to
write the result to a given cookie jar and then never actually call
curl_easy_perform() - the given file(s) to read was never read but the
output file was written and thus it caused a "funny" result.
- While doing some tests for the bug above, I noticed that Firefox generates
large numbers (for the expire time) in the cookies.txt file and libcurl
didn't treat them properly. Now it does.
site responds with bad HTTP response that doesn't contain any header at all,
only a response body, and the write callback returns 0 to abort the
transfer, it didn't have any real effect but the write callback would be
called once more anyway.
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
internally, with code provided by sslgen.c. All SSL-layer-specific code is
then written in ssluse.c (for OpenSSL) and gtls.c (for GnuTLS).
As far as possible, internals should not need to know what SSL layer that is
in use. Building with GnuTLS currently makes two test cases fail.
TODO.gnutls contains a few known outstanding issues for the GnuTLS support.
GnuTLS support is enabled with configure --with-gnutls
that picks NTLM. Thanks to David Byron letting me test NTLM against his
servers, I could quickly repeat and fix the problem. It turned out to be:
When libcurl POSTs without knowing/using an authentication and it gets back a
list of types from which it picks NTLM, it needs to either continue sending
its data if it keeps the connection alive, or not send the data but close the
connection. Then do the first step in the NTLM auth. libcurl didn't send the
data nor close the connection but simply read the response-body and then sent
the first negotiation step. Which then failed miserably of course. The fixed
version forces a connection if there is more than 2000 bytes left to send.
operation to the caller. Disconnecting has the disadvantage that the conn
pointer gets completely invalidated and this is not handled on lots of places
in the code.
gets closed just after the request has been sent failed and did not re-issue
a request on a fresh reconnect like the easy interface did. Now it does!
(define CURL_MULTIEASY, run test case 160)
using a custom Host: header and curl fails to send a request on a re-used
persistent connection and thus creates a new connection and resends it. It
then sent two Host: headers. Cyrill's analysis was posted here:
http://curl.haxx.se/mail/archive-2005-01/0022.html
libcurl without cookie support. This is mainly useful if you want to build a
minimalistic libcurl with no cookies support at all. Like for embedded
systems or similar.
file that was already completely downloaded caused an error, while it
doesn't if you don't use --fail! I added test case 194 to verify the fix.
Grrr. CURLOPT_FAILONERROR is now added to the list stuff to remove in
libcurl v8 due to all the kludges needed to support it.
CURLOPT_FOLLOWLOCATION, libcurl reported error if a redirect happened even if
the new URL would provide the resumed file. Test case 188 added to verify the
fix (together with existing test 99).
all things up to work with encoded host names internally, as well as keeping
'display names' to show in debug messages. IDN resolves work for me now using
ipv6, ipv4 and ares resolving. Even cookies on IDN sites seem to do right.
stuff added a few weeks ago. Turns out that if you specify --proxy-ntlm and
communicate with a proxy that requires basic authentication, the proxy
properly returns a 407, but the failure detection code doesn't realize it
should give up, so curl returns with exit code 0. Test case 162 verifies
this.
160 shows.
We got no data and we attempted to re-use a connection. This might happen if
the connection was left alive when we were done using it before, but that was
closed when we wanted to read from it again. Bad luck. Retry the same request
on a fresh connect!
Deleted the sockerror variable again, it serves no purpose anymore.
a range of a document beyond its size, caused libcurl to "hang" until the
server closed the connection and then it returned error 18.
This is bad. This way, we don't return any error at all, which isn't nice
either, as we need to alert the app somehow that the request range was out
of size.
we might not get a body when we get a 401 with a set of WWW-Authenticate:
headers. This fixes the problem Kevin Roth detected in 7.10.8-pre4 and pre5.
Verified by test case 91.
CURLOPT_SSL_CTX_FUNCTION to set a callback that gets called with the
OpenSSL's ssl_ctx pointer passed in and allow a callback to act on it. If
anything but CURLE_OK is returned, that will also be returned by libcurl
all the way back. If this function changes the CURLOPT_URL, libcurl will
detect this and instead go use the new URL.
CURLOPT_SSL_CTX_DATA is a pointer you set to get passed to the callback set
with CURLOPT_SSL_CTX_FUNCTION.
function, as this could easily end up looping for a very long time (more or
less until the whole transfer was done) and no library-using app would want
that.
Found thanks to a report by Kyle Sallee.
header is used, we must wait for a 100-code (or timeout), before we send the
data. The timeout is merely 1000 ms at this point. We may have reason to set
a longer timeout in the future.
regular transfer process. This required some new tweaks, like for example
we need to be able to tell the tranfer loop to not chunky-encode uploads
while we're transferring the rest of the request...
