If the first name server is not available, the multi interface does
not invoke the socket_cb when the DNS request to the first name server
timesout. Ensure that the list of sockets are always updated after
calling Curl_resolver_is_resolved.
This bug can be reproduced if Curl is complied with --enable_ares and
your code uses the multi socket interfaces and the
CURLMOPT_SOCKETFUNCTION option. To test try:
iptables -I INPUT \
-s $(sed -n -e '/name/{s/.* //p;q}' /etc/resolv.conf)/32 \
-j REJECT
and then run a program which uses the multi-interface.
This extends the fix from commit d7934b8bd4
When the multi state is changed within the multi_runsingle from DOING to
DO_MORE, we didn't immediately start the FTP state machine again. That
then left the FTP state in FTP_STOP. When curl_multi_fdset() was
subsequently called, the ftp_domore_getsock() function would return the
wrong fd info.
Reported by: Gokhan Sengun
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
Prevent modification of easy handle being added with curl_multi_add_handle()
unless this function actually suceeds.
Run Curl_posttransfer() to allow restoring of SIGPIPE handler when
Curl_connect() fails early in multi_runsingle().
When the progress function returns to cancel the request, we must mark
the connection to get closed and it must do to the DONE state.
do_init() must be called as early as possible so that state variables
for new connections are reset early. We could otherwise see that the old
values were still there when a connection was to be disconnected very
early and it would make it behave wrongly.
Bug: http://curl.haxx.se/mail/lib-2011-10/0006.html
Reported by: Vladimir Grishchenko
If a socket is larger than FD_SETSIZE, avoid using FD_SET() on the
platforms where this is possible.
Bug: http://curl.haxx.se/bug/view.cgi?id=3413274
Reported by: Tim Starling
Just internal stuff...
Curl_safefree is now a macro defined in memdebug.h instead of a function
prototyped in url.h and implemented in url.c, so inclusion of url.h is no
longer required in order to simply use Curl_safefree.
Provide definition of macro WHILE_FALSE in setup_once.h in order to allow
other macros such as DEBUGF and DEBUGASSERT, and code using it, to compile
without 'conditional expression is constant' warnings.
The WHILE_FALSE stuff fixes 150+ MSVC compiler warnings.
When connecting to a socks or similar proxy we do the proxy handshake at
once when we know the TCP connect is completed and we only consider the
"connection" complete after the proxy handshake. This fixes test 564
which is now no longer considered disabled.
Reported by: Dmitri Shubin
Bug: http://curl.haxx.se/mail/lib-2011-04/0127.html
asyn-ares.c and asyn-thread.c are two separate backends that implement
the same (internal) async resolver API for libcurl to use. Backend is
specified at build time.
The internal resolver API is defined in asyn.h for asynch resolvers.
Within multi_socket when conn is used as a shorthand, data could be
changed and multi_runsingle could modify the connectdata struct to deal
with. This bug has not been included in a public release.
Using 'conn' like that turned out to be ugly. This change is a partial
revert of commit f1c6cd42f4.
Reported by: Miroslav Spousta
Bug: http://curl.haxx.se/bug/view.cgi?id=3265485
The protocol handler struct got a 'flags' field for special information
and characteristics of the given protocol.
This now enables us to move away central protocol information such as
CLOSEACTION and DUALCHANNEL from single defines in a central place, out
to each protocol's definition. It also made us stop abusing the protocol
field for other info than the protocol, and we could start cleaning up
other protocol-specific things by adding flags bits to set in the
handler struct.
The "protocol" field connectdata struct was removed as well and the code
now refers directly to the conn->handler->protocol field instead. To
make things work properly, the code now always store a conn->given
pointer that points out the original handler struct so that the code can
learn details from the original protocol even if conn->handler is
modified along the way - for example when switching to go over a HTTP
proxy.
Some protocols have to call the underlying functions without regard to
what exact state the socket signals. For example even if the socket says
"readable", the send function might need to be called while uploading,
or vice versa. This is the case for libssh2 based protocols: SCP and
SFTP and we now introduce a define to set those protocols and we make
the multi interface code aware of this concept.
This is another fix to make test 582 run properly.
After a request times out, the connection wasn't properly closed and
prevented to get re-used, so subsequent transfers could still mistakenly
get to use the previously aborted connection.
When failing to connect the protocol during the CURLM_STATE_PROTOCONNECT
state, Curl_done() has to be called with the premature flag set TRUE as
for the pingpong protocols this can be important.
When Curl_done() is called with premature == TRUE, it needs to call
Curl_disconnect() with its 'dead_connection' argument set to TRUE as
well so that any protocol handler's disconnect function won't attempt to
use the (control) connection for anything.
This problem caused the pingpong protocols to fail to disconnect when
STARTTLS failed.
Reported by: Alona Rossen
Bug: http://curl.haxx.se/mail/lib-2011-02/0195.html
The code in the toofast state needs to first recalculate the values
before it uses them again since it may have been a while since it last
did it when it reaches this point.
The info about pipe status and expire cleared are clearly debug-related
and not anything mere mortals will or should care about so they are now
ifdef'ed DEBUGBUILD
The generic timeout code must not check easy handles that are already
completed. Going to completed (again) within there risked decreasing the
number of alive handles again and thus it could go negative.
This regression bug was added in 7.21.2 in commit ca10e28f06
It helps to prevent a hangup with some FTP servers in case idle session
timeout has exceeded. But it may be useful also for other protocols
that send any quit message on disconnect. Currently used by FTP, POP3,
IMAP and SMTP.
The functions Curl_disconnect() and Curl_done() are both used within the
scope of a single request so they cannot be allowed to use
Curl_expire(... 0) to kill all timeouts as there are some timeouts that
are set before a request that are supposed to remain until the request
is done.
The timeouts are now instead cleared at curl_easy_cleanup() and when the
multi state machine changes a handle to the complete state.
Add a timeout check for handles in the state machine so that they will
timeout in all states disregarding what actions that may or may not
happen.
Fixed a bug in socket_action introduced recently when looping over timed
out handles: it wouldn't assign the 'data' variable and thus it wouldn't
properly take care of handles.
In the update_timer function, the code now checks if the timeout has
been removed and then it tells the application. Previously it would
always let the remaining timeout(s) just linger to expire later on.
Each easy handle has a list of timeouts, so as soon as the main timeout
for a handle expires, we must make sure to get the next entry from the
list and re-add the handle to the splay tree.
This was attempted previously but was done poorly in my commit
232ad6549a.
I fell over this bug report that mentioned that libcurl could wrongly
send more than one complete messages at the end of a transfer. Reading
the code confirmed this, so I've added a new multi state to make it not
happen. The mentioned bug report was made by Brad Jorsch but is (oddly
enough) filed in Debian's bug tracker for the "wmweather+" tool.
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593390
When detecting that the send or recv speed, the multi interface changes
state to TOOFAST and previously there was no timeout set that would
force a recheck but it would rely on the application to somehow call
libcurl anyway. This now sets a timeout for a suitable future time to
check again if the average transfer speed is then below the threshold
again.
Curl_expire() is now expanded to hold a list of timeouts for each easy
handle. Only the closest in time will be the one used as the primary
timeout for the handle and will be used for the splay tree (which sorts
and lists all handles within the multi handle).
When the main timeout has triggered/expired, the next timeout in time
that is kept in the list will be moved to the main timeout position and
used as the key to splay with. This way, all timeouts that are set with
Curl_expire() internally will end up as a proper timeout. Previously any
Curl_expire() that set a _later_ timeout than what was already set was
just silently ignored and thus missed.
Setting Curl_expire() with timeout 0 (zero) will cancel all previously
added timeouts.
Corrects known bug #62.
Instead of looping over all attached easy handles, this now keeps a list
of messages in the multi handle. It allows curl_multi_info_read() to
perform O(1) no matter how many easy handles that are handled. This is
of importance since this function may be polled very frequently by apps
using the multi interface.
The struct used for storing the message for a completed transfer is now
no longer allocated separatly but is kept within the main struct kept
for each easy handle so that we avoid one malloc (and the subsequent
free).
