Renamed copy_header_value() to Curl_copy_header_value() as this
function is now non static.
Simplified proxy flag in Curl_http_input_auth() when calling
sub-functions.
Removed unnecessary white space removal when using negotiate as it had
been missed in commit cdccb42267.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
A bundle is a list of all persistent connections to the same host.
The connection cache consists of a hash of bundles, with the
hostname as the key.
The benefits may not be obvious, but they are two:
1) Faster search for connections to reuse, since the hash
lookup only finds connections to the host in question.
2) It lays out the groundworks for an upcoming patch,
which will introduce multiple HTTP pipelines.
This patch also removes the awkward list of "closure handles",
which were needed to send QUIT commands to the FTP server
when closing a connection.
Now we allocate a separate closure handle and use that
one to close all connections.
This has been tested in a live system for a few weeks, and of
course passes the test suite.
.. that are sent when auth-negotiating before a chunked
upload or when setting the 'Transfer-Encoding: chunked'
header and intentionally sending no content.
Adjust test565 and test1333 accordingly.
The logic previously checked for a started NTLM negotiation only for
host and not also with proxy, leading to problems doing POSTs over a
proxy NTLM that are larger than 2000 bytes. Now it includes proxy in the
check.
Bug: http://curl.haxx.se/bug/view.cgi?id=3582321
Reported by: John Suprock
Previously the curl_multi interface would freeze if darwinssl was
enabled and at least one of the handles tried to connect to a Web site
using HTTPS. Removed the "wouldblock" state darwinssl was using because
I figured out a solution for our "would block but in which direction?"
dilemma.
A HEAD response has no body length and gets the headers like the
corresponding GET would so it should not get closed after the response
based on the same rules. This mistake caused connections that did HEAD
to get closed too often without a valid reason.
Bug: http://curl.haxx.se/bug/view.cgi?id=3542731
Reported by: Eelco Dolstra
The function https_getsock was only implemented properly when USE_SSLEAY
or USE_GNUTLS is defined, but it is also necessary for USE_SCHANNEL.
The problem occurs when Curl_read_plain or Curl_write_plain returns
CURLE_AGAIN. In that case CURL_OK is returned to the multi-interface an
the used socket is set to state CURL_POLL_REMOVE and the easy-state is
set to CURLM_STATE_PROTOCONNECT. This is fine, because later the socket
should be set to CURL_POLL_IN or CURL_POLL_OUT via multi_getsock. That's
where https_getsock is called and doesn't return any sockets.
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Test case 1333 is added to verify.
Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html
Reported by: Arnaud Compan
The commit e650dbde86 that stripped off [brackets] from ipv6-only host
headers for the sake of cookie parsing wrongly incremented the host
pointer which would cause a bad free() call later on.
The refactoring of HTTP CONNECT handling in commit 41b0237834 that
made it protocol independent broke it for the multi interface. This fix
now introduce a better state handling and moved some logic to the
http_proxy.c source file.
Reported by: Yang Tse
Bug: http://curl.haxx.se/mail/lib-2012-03/0162.html
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
If a proxy offers several Authentication schemes where NTLM and
Negotiate are offered by the proxy and you tell libcurl not to use the
Negotiate scheme then the request never returns when the proxy answers
with its HTTP 407 reply.
It is reproducible by the following steps:
- Use a proxy that offers NTLM and Negotiate ( CURLOPT_PROXY and
CURLOPT_PROXYPORT )
- Tell libcurl NOT to use Negotiate CURL_EASY_SETOPT(CURLOPT_PROXYAUTH,
CURLAUTH_BASIC | CURLAUTH_DIGEST | CURLAUTH_NTLM )
- Start the request
The call to CURL_EASY_PERFORM never returns. If you switch on debug
logging you can see that libcurl issues a new request As soon as it
received the 407 reply. Instead it should return and set the response
code to 407.
Bug: http://curl.haxx.se/mail/lib-2011-10/0323.html
After a PORT has been issued, and the multi handle would switch to the
CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would
return the wrong fdset to wait for when curl_multi_fdset() is
called. The code would blindly assume that it was waiting for a connect
of the second connection, while that isn't true immediately after the
PORT command.
Also, the function multi.c:domore_getsock() was highly FTP-centric and
therefore ugly to keep in protocol-agnostic code. I solved this problem
by introducing a new function pointer in the Curl_handler struct called
domore_getsock() which is only called during the DOMORE state for
protocols that set that pointer.
The new ftp.c:ftp_domore_getsock() function now returns fdset info about
the control connection's command/response handling while such a state is
in use, and goes over to waiting for a writable second connection first
once the commands are done.
The original problem could be seen by running test 525 and checking the
time stamps in the FTP server log. I can verify that this fix at least
fixes this problem.
Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html
Reported by: Gokhan Sengun
The fix is pretty much the one Nick Zitzmann provided, just edited to do
the right indent levels and with test case 1204 added to verify the fix.
Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html
Reported by: Nick Zitzmann
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb
Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb
Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED
Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE
Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE
Static function wb_ntlm_close renamed to ntlm_wb_cleanup
Static function wb_ntlm_initiate renamed to ntlm_wb_init
Static function wb_ntlm_response renamed to ntlm_wb_response
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
Previous interfaces for these libcurl internal functions did not allow to tell
apart a legitimate zero size result from an error condition. These functions
now return a CURLcode indicating function success or otherwise specific error.
Output size is returned using a pointer argument.
All usage of these two functions, and others closely related, has been adapted
to the new interfaces. Relative error and OOM handling adapted or added where
missing. Unit test 1302 also adapted.
Daniel Stenberg