Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... to make build tools/valgrind warn if no curl_global_cleanup is
called.
This is conditionally only done for debug builds with the env variable
CURL_GLOBAL_INIT set.
Closes#6410
Paused transfers should not be stopped due to slow speed even when
CURLOPT_LOW_SPEED_LIMIT is set. Additionally, the slow speed timer is
now reset when the transfer is unpaused - as otherwise it would easily
just trigger immediately after unpausing.
Reported-by: Harry Sintonen
Fixes#6358Closes#6359
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
Now that all functions in select.[ch] take timediff_t instead
of the limited int or long, we can remove type conversions
and related preprocessor checks to silence compiler warnings.
Avoiding conversions from time_t was already done in 842f73de.
Based upon #5262
Supersedes #5214, #5220 and #5221
Follow up to #5343 and #5479Closes#5490
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
- Ignore CURLE_NOT_BUILT_IN errors returned by c-ares functions in
curl_easy_duphandle.
Prior to this change if c-ares was used as the resolver backend and
either it was too old or libcurl was built without IPv6 support then
some of our resolver functions could return CURLE_NOT_BUILT_IN to
curl_easy_duphandle causing it to fail.
Caused by c8f086b which shipped in 7.69.1.
Reported-by: Karl Chen
Fixes https://github.com/curl/curl/issues/5097
Closes https://github.com/curl/curl/pull/5100
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
With c-ares the dns parameters lives in ares_channel. Store them in the
curl handle and set them again in easy_duphandle.
Regression introduced in #3228 (6765e6d), shipped in curl 7.63.0.
Fixes#4893Closes#5020
Signed-off-by: Ernst Sjöstrand <ernst.sjostrand@verisure.com>
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
... since the socket might not actually be readable anymore when for
example the data is already buffered in the TLS layer.
Fixes#4966
Reported-by: Anders Berg
Closes#5000
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes#4939Closes#4940
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
- Removed from global_init since it isn't thread-safe. The symbol will
still remain to not break compiles, it just won't have any effect going
forward.
- make the internals NOT loop on EINTR (the opposite from previously).
It only risks returning from the select/poll/wait functions early, and that
should be risk-free.
Closes#4840
... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes#4636Closes#4653
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
- In curl_easy_reset attempt to resize the receive buffer to its default
size. If realloc fails then continue using the previous size.
Prior to this change curl_easy_reset did not properly handle resetting
the receive buffer (data->state.buffer). It reset the variable holding
its size (data->set.buffer_size) to the default size (READBUFFER_SIZE)
but then did not actually resize the buffer. If a user resized the
buffer by using CURLOPT_BUFFERSIZE to set the size smaller than the
default, later called curl_easy_reset and attempted to reuse the handle
then a heap overflow would very likely occur during that handle's next
transfer.
Reported-by: Felix Hädicke
Fixes https://github.com/curl/curl/issues/4143
Closes https://github.com/curl/curl/pull/4145
