... as that counter is subsequently used to detect if nothing was
returned from the peer. This made curl return CURLE_OK when it should
have returned CURLE_GOT_NOTHING.
Fixes#5992
Reported-by: Tom van der Woerdt
Closes#5994
Fixed two return code mixups. CURLE_UNKNOWN_OPTION is saved for when the
option is, yeah, not known. Clarified this in the setopt man page too.
Closes#5993
These two files were always tightly connected and it was hard to
understand what went into which. This also allows us to make the
ftpsend() function static (moved from ftp.c).
Removed security.c
Renamed curl_sec.h to krb5.h
Closes#5987
By avoiding an unnecessary error check and the temp use of the tm
struct, the time2epoch conversion function gets a little bit faster.
When repeating test 517, the updated version is perhaps 1% faster (on
one particular build on one particular architecture).
Closes#5985
If the received PASV response doesn't match the expected pattern, we
could end up reading uninitialized integers for IP address and port
number.
Issue pointed out by muse.dev
Closes#5972
Also skip pre-checking sockets to set timeout_ms to 0
after the first socket has been detected to be ready.
Reviewed-by: rcombs on github
Reviewed-by: Daniel Stenberg
Follow up to #5886
Since the struct is quite large (1 long and 10 ints) we
declare it once at the beginning of the function instead
of multiple times inside loops to avoid stack movements.
Reviewed-by: Viktor Szakats
Reviewed-by: Daniel Stenberg
Closes#5886
This is primarily interesting for cases where CURLOPT_NOBODY is set as
previously curl would not return an error for this case.
MDTM getting 550 now also returns this error (it returned
CURLE_FTP_COULDNT_RETR_FILE before) in order to unify return codes for
missing files across protocols and specific FTP commands.
libcurl already returns error on a 550 as a MDTM response (when
CURLOPT_FILETIME is set). If CURLOPT_NOBODY is not set, an error would
happen subsequently anyway since the RETR command would fail.
Add test 1913 and 1914 to verify. Updated several tests accordingly due
to the updated SIZE behavior.
Reported-by: Tomas Berger
Fixes#5953Closes#5957
... when continuing a transfer from a FETCH response.
When the size of the file was small enough that the entirety of the
transfer happens in a single go and schannel buffers holds the entire
data. However, it wasn't completely read in Curl_pp_readresp since a
line break was found before that could happen. So, by the time we are in
imap_state_fetch_resp - there's data in buffers that needs to be read
via Curl_read but nothing to read from the socket. After we setup a
transfer (Curl_setup_transfer), curl just waits on the socket state to
change - which doesn't happen since no new data ever comes.
Closes#5961
Previously there were several locations that called
nghttp2_session_mem_recv and handled responses slightly differently.
Those have been converted to call the existing
h2_process_pending_input() function.
Moved the end-of-session check to h2_process_pending_input() since the
only place the end-of-session state can change is after nghttp2
processes additional input frames.
This will likely fix the fuzzing error. While I don't have a root cause
the out-of-bounds read seems like a use after free, so moving the
nghttp2_session_check_request_allowed() call to a location with a
guaranteed nghttp2 session seems reasonable.
Also updated a few nghttp2 callsites to include error messages and added
a few additional error checks.
Closes#5648
configure --enable-debug now enables -Wassign-enum with clang,
identifying several enum "abuses" also fixed.
Reported-by: Gisle Vanem
Bug: 879007f811 (commitcomment-42087553)Closes#5929
If the error reason from the lib is
SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED, libcurl will return
CURLE_PEER_FAILED_VERIFICATION and not CURLE_SSL_CONNECT_ERROR.
This unifies the libcurl return code and makes libressl run test 313
(CRL testing) fine.
Closes#5934
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
The code section that is OpenSSL 3+ specific now uses the same logic as
is used in the version < 3 section. It caused a compiler error without
it.
Closes#5907
Drop dynamic loading of ws2_32.dll and instead rely on the
imported version which is now required to be at least 2.2.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Reviewed-by: Viktor Szakats
Closes#5854
IPv6, telnet and now also the multi API require WinSock
version 2 which is available starting with Windows 95.
Therefore we think it is time to drop support for version 1.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Reviewed-by: Viktor Szakats
Follow up to #5634Closes#5854
The poll emulation via select already consumes POLLRDNORM,
POLLWRNORM and POLLRDBAND as input events. Therefore it
should also return them as output events if signaled.
Also fix indentation in input event handling block.
Assisted-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Replaces #5852Closes#5883
`USE_WINDOWS_SSPI` without `USE_WIN32_CRYPTO` but with any other DES
backend is fine, but was excluded before.
This also fixes test 1013 as the condition for SMB support in
configure.ac didn't match the condition in the source code. Now it
does.
Fixes https://github.com/curl/curl/issues/1262
Closes https://github.com/curl/curl/pull/5771
poll and select already return -1 on error according to POSIX,
so there is no need to perform a <0 to -1 conversion in code.
Also we can just use one check with <= 0 on the return code.
Assisted-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5852Closes#5880
Learn from the way Cygwin handles and maps the WinSock events
to simulate correct and complete poll and select behaviour
according to Richard W. Stevens Network Programming book.
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Follow up to #5634Closes#5867
Setting a timeout to INT_MAX could cause an immediate error to get
returned as timeout because of an overflow when different values of
'now' were used.
This is primarily fixed by having Curl_pgrsTime() return the "now" when
TIMER_STARTSINGLE is set so that the parent function will continue using
that time.
Reported-by: Ionuț-Francisc Oancea
Fixes#5583Closes#5847
USE_TLS_SRP will be true if *any* selected TLS backend can use SRP
HAVE_OPENSSL_SRP is defined when OpenSSL can use it
HAVE_GNUTLS_SRP is defined when GnuTLS can use it
Clarify in the curl_verison_info docs that CURL_VERSION_TLSAUTH_SRP is
set if at least one of the supported backends offers SRP.
Reported-by: Stefan Strogin
Fixes#5865Closes#5870
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
The get_cert_location function allocates memory only on success.
Previously get_cert_location was able to allocate memory and return
error. It wasn't obvious and in this case the memory wasn't
released.
Fixes#5855Closes#5860
Check readiness of all sockets before waiting on them
to avoid locking in case the one-time event FD_WRITE
was already consumed by a previous wait operation.
More information about WinSock network events:
https://docs.microsoft.com/en-us/windows/win32/api/
winsock2/nf-winsock2-wsaeventselect#return-value
Closes#5634
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
A previous version of this patch failed to account for how in WinSock,
FD_WRITE is set only once when writing becomes possible and not again
until after a send has failed due to the buffer filling. This contrasts
to how FD_READ and FD_OOB continue to be set until the conditions they
refer to no longer apply. This meant that if a user wrote some data to
a socket, but not enough data to completely fill its send buffer, then
waited on that socket to become writable, we'd erroneously stall until
their configured timeout rather than returning immediately.
This version of the patch addresses that issue by checking each socket
we're waiting on to become writable with select() before the wait, and
zeroing the timeout if it's already writable.
Assisted-by: Marc Hörsken
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Tested-by: Gergely Nagy
Tested-by: Rasmus Melchior Jacobsen
Tested-by: Tomas Berger
Replaces #5397
Reverts #5632Closes#5634
Change Curl_socket_check to use select-fallback in Curl_poll
instead of implementing it in Curl_socket_check and Curl_poll.
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5262 and #5492Closes#5707
This commit changes Curl_socket_check to use POLLPRI to
check for connect failure on the write socket, because
POLLPRI maps to fds_err. This is in line with select(2).
The select-based socket check correctly checks for connect
failures by adding the write socket also to fds_err.
The poll-based implementation (which internally can itself
fallback to select again) did not previously check for
connect failure by using POLLPRI with the write socket.
See the follow up commit to this for more information.
This commit makes sure connect failures can be detected
and handled if HAVE_POLL_FINE is defined, eg. on msys2-devel.
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Replaces #5509
Prepares #5707
The buffer only exists during transfer and then we shouldn't change the
size (the setopt is not documented to work then).
Reported-by: Harry Sintonen
Closes#5842
Failures clearly returned from a (SOCKS) proxy now causes this return
code. Previously the situation was not very clear as what would be
returned and when.
In addition: when this error code is returned, an application can use
CURLINFO_PROXY_ERROR to query libcurl for the detailed error, which then
returns a value from the new 'CURLproxycode' enum.
Closes#5770
... not newline separated from the previous line. This makes it output
asterisk prefixed properly like other verbose putput!
Reported-by: jmdavitt on github
Fixes#5826Closes#5827
This flag was applied to the connection struct that is released on
retry. These changes move the retry counter into Curl_easy struct that
lives across retries and retains the new connection.
Reported-by: Cherish98 on github
Fixes#5794Closes#5800
The debug output used ssherr instead of sftperr which not only outputs
the wrong error code but also casues a warning on Windows.
Follow-up to 7370b4e39f
Reported-by: Gisle Vanem
Bug: 7370b4e39f (r41334700)Closes#5799
The shutdown function is for downgrading a connection from TLS to plain,
and this is not requested here.
Have ssl_close reset the TLS connection state.
This partially reverts commit f002c850d9
Reported-by: Rasmus Melchior Jacobsen
Reported-by: Denis Goleshchikhin
Fixes#5797
The previous h2 trailer fix in 54a2b63 was wrong and caused a
regression: it cannot deal with trailers immediately when read since
they may be read off the connection by the wrong 'data' owner.
This change reverts the logic back to gathering all trailers into a
single buffer, like before 54a2b63.
Reported-by: Tadej Vengust
Fixes#5663Closes#5769
Classic mingw and 10y+ old versions of mingw-w64 don't ship with
Windows headers having the typedef necessary for Unix Sockets
support, so try detecting these environments to disable this
feature.
Ref: cf6afc5717/
Reviewed-by: Daniel Stenberg
Fixes#5674Closes#5758
Previously any connect-only connections in a multi handle would be kept
alive until the multi handle was closed. Since these connections cannot
be re-used, they can be marked for closure when the associated easy
handle is removed from the multi handle.
Closes#5749
They're not thread-safe so they should not be used in libcurl code.
Explictly enabled when deemed necessary and in examples and tests
Reviewed-by: Nicolas Sterchele
Closes#5732
Previously a file that isn't user-readable but is user-writable would
not be properly avoided and would get overwritten.
Reported-by: BrumBrum on hackerone
Assisted-by: Jay Satiro
Bug: https://hackerone.com/reports/926638Closes#5731
Since 09b9fc900 (multi: remove 'Curl_one_easy' struct, phase 1,
2013-08-02), the easy handle list is not circular but ends with
->next pointing to NULL.
Reported-by: Masaya Suzuki <masayasuzuki@google.com>
Closes#5737
Unsetting CURLOPT_NOBODY with 0L when doing HTTP has no documented
action but before 7.71.0 that used to switch back to GET and with this
change (assuming the method is still set to HEAD) this behavior is
brought back.
Reported-by: causal-agent on github
Fixes#5725Closes#5728
