1
0
mirror of https://github.com/moparisthebest/curl synced 2024-12-21 23:58:49 -05:00
Commit Graph

9281 Commits

Author SHA1 Message Date
Dan Fandrich
07fd7871b3 schannel: return a more specific error code for SEC_E_UNTRUSTED_ROOT 2017-05-04 18:19:33 +02:00
Marcel Raad
a51ca050fc
curl_setup_once: use SEND_QUAL_ARG2 for swrite
SEND_QUAL_ARG2 had to be set, but was never used. Use it in swrite to
avoid warnings about casting away low-level const.

Closes https://github.com/curl/curl/pull/1464
2017-05-04 09:23:00 +02:00
Marcel Raad
cee39aa3be
lib: fix compiler warnings
Fix the following warnings when building the tests by using the correct
types:
cast from 'const char *' to 'void *' drops const qualifier
[-Wcast-qual]
implicit conversion changes signedness [-Wsign-conversion]
2017-05-03 20:11:13 +02:00
Richard Hsu
862b02f894 Telnet: Write full buffer instead of byte-by-byte
Previous TODO wanting to write in chunks. We should support writing more
at once since some TELNET servers may respond immediately upon first
byte written such as WHOIS servers.

Closes #1389
2017-05-02 23:23:39 +02:00
Dan Fandrich
6943085b50 gtls: fixed a lingering BUFSIZE reference 2017-05-02 09:14:26 +02:00
Daniel Stenberg
eab6732fde ssh: fix compiler warning from e40e9d7f0d 2017-05-02 08:32:04 +02:00
Daniel Stenberg
4858c451ee url: let CURLOPT_BUFFERSIZE realloc to smaller sizes too
Closes #1449
2017-05-02 00:04:52 +02:00
Daniel Stenberg
e3ed5cb380 BUFSIZE: rename to READBUFFER_*, make separate MASTERBUF_SIZE 2017-05-01 22:55:29 +02:00
Daniel Stenberg
799c7048dc openssl: use local stack for temp storage 2017-05-01 22:55:29 +02:00
Daniel Stenberg
7ee52c25f3 sendf: remove use of BUFSIZE from debug data conversions
The buffer can have other sizes.
2017-05-01 22:55:29 +02:00
Daniel Stenberg
e40e9d7f0d buffer: use data->set.buffer_size instead of BUFSIZE
... to properly use the dynamically set buffer size!
2017-05-01 22:55:29 +02:00
Daniel Stenberg
c79f4908d4 krb5: use private buffer for temp string, not receive buffer 2017-05-01 22:55:29 +02:00
Daniel Stenberg
89cf6f38d2 upload: UPLOAD_BUFSIZE is now for the upload buffer 2017-05-01 22:55:29 +02:00
Daniel Stenberg
0cab3a394a http-proxy: use a dedicated CONNECT response buffer
To make it suitably independent of the receive buffer and its flexible
size.
2017-05-01 22:55:29 +02:00
Daniel Stenberg
40a074f255 transfer: fix minor buffer_size mistake 2017-05-01 22:55:29 +02:00
Daniel Stenberg
f2fadf490f failf: use private buffer, don't clobber receive buffer 2017-05-01 22:55:29 +02:00
Daniel Stenberg
b8191e975f pingpong: use the set buffer size 2017-05-01 22:55:29 +02:00
Daniel Stenberg
504eafff86 http2: use the correct set buffer size 2017-05-01 22:55:29 +02:00
Daniel Stenberg
87eb8d5b30 http: don't clobber the receive buffer for timecond 2017-05-01 22:55:29 +02:00
Daniel Stenberg
f535f4f5fc buffer_size: make sure it always has the correct size
Removes the need for CURL_BUFSIZE
2017-05-01 22:55:29 +02:00
Daniel Stenberg
7c312f84ea file: use private buffer for C-L output
... instead of clobbering the download buffer.
2017-05-01 22:55:29 +02:00
Daniel Stenberg
c2ddc12d60 CURLOPT_BUFFERSIZE: 1024 bytes is now the minimum size
The buffer is needed to receive FTP, HTTP CONNECT responses etc so
already at this size things risk breaking and smaller is certainly not
wise.
2017-05-01 22:55:29 +02:00
Daniel Stenberg
349789e645 ftp: use private buffer for temp storage, not receive buffer 2017-05-01 22:55:29 +02:00
Daniel Stenberg
94460878cc http: use private user:password output buffer
Don't clobber the receive buffer.
2017-05-01 22:55:29 +02:00
Jay Satiro
499a7288fe curl_setup: Ensure no more than one IDN lib is enabled
Prior to this change it was possible for libcurl to be built with both
Windows' native IDN lib (normaliz) and libidn2 enabled. It appears that
doesn't offer any benefit --and could cause a bug-- since libcurl's IDN
handling is written to use either one but not both.

Bug: https://github.com/curl/curl/issues/1441#issuecomment-297689856
Reported-by: Gisle Vanem
2017-05-01 14:48:34 -04:00
Marcel Raad
dc9e4859bb
http2: declare TU-local variables static
This fixes the following clang warnings:

http2.c:184:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2' [-Werror,-Wmissing-variable-declarations]
http2.c:204:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2_ssl'
[-Werror,-Wmissing-variable-declarations]
2017-04-30 22:33:33 +02:00
Marcel Raad
65c6caacae
curl_rtmp: fix missing-variable-declarations warnings
clang complains:

curl_rtmp.c:61:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmp' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:81:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpt' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:101:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpe' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:121:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpte' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:141:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmps' [-Werror,-Wmissing-variable-declarations]
curl_rtmp.c:161:27: error: no previous extern declaration for non-static variable 'Curl_handler_rtmpts' [-Werror,-Wmissing-variable-declarations]

Fix this by including the header file.
2017-04-29 19:17:51 +02:00
Dan Fandrich
12e7a8c3d6 url: fixed a memory leak on OOM while setting CURLOPT_BUFFERSIZE 2017-04-29 18:52:51 +02:00
Dan Fandrich
63503a969f http-proxy: removed unused argument in CURL_DISABLE_PROXY case
Missed in commit 55c3c02e
2017-04-27 11:42:04 +02:00
Marcel Raad
b851421642
lib: remove unused code
This fixes the following clang warnings:
macro is not used [-Wunused-macros]
will never be executed [-Wunreachable-code]

Closes https://github.com/curl/curl/pull/1448
2017-04-26 10:01:53 +02:00
Daniel Stenberg
55c3c02e59 http-proxy: remove unused argument from Curl_proxyCONNECT() 2017-04-26 00:34:22 +02:00
Martin Kepplinger
fb67c977b9 url: declare get_protocol_family() static
get_protocol_family() is not defined static even though there is a
static local forward declaration. Let's simply make the definition match
it's declaration.

Bug: https://curl.haxx.se/mail/lib-2017-04/0127.html
2017-04-26 00:02:51 +02:00
Kamil Dudka
e3e8d0204b nss: load libnssckbi.so if no other trust is specified
The module contains a more comprehensive set of trust information than
supported by nss-pem, because libnssckbi.so also includes information
about distrusted certificates.

Reviewed-by: Kai Engert
Closes #1414
2017-04-25 13:24:24 +02:00
Kamil Dudka
fab3d1ec65 nss: factorize out nss_{un,}load_module to separate fncs
No change of behavior is intended by this commit.
2017-04-25 13:22:37 +02:00
Kamil Dudka
c8ea86f377 nss: do not leak PKCS #11 slot while loading a key
It could prevent nss-pem from being unloaded later on.

Bug: https://bugzilla.redhat.com/1444860
2017-04-25 13:22:33 +02:00
Daniel Stenberg
e698b82287 transfer: remove 'uploadbuf' pointer and cleanup readwrite_upload()
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.

Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
2017-04-25 10:55:35 +02:00
Marcel Raad
93567071b7
if2ip: fix -Wcast-align warning
Follow-up to 119037325d, which fixed the
warning in the HAVE_GETIFADDRS block, but not in the
HAVE_IOCTL_SIOCGIFADDR block.
2017-04-25 09:19:59 +02:00
Kamil Dudka
c8ac0b6a7f nss: adapt to the new Curl_llist API
This commit fixes compilation failure caused by
cbae73e1dd.
2017-04-24 17:50:27 +02:00
Daniel Stenberg
d87bd46cbf llist: fix a comment after cbae73e1dd
Pointed-it-by: Kevin Ji
URL: cbae73e1dd (commitcomment-21872622)
2017-04-24 00:54:04 +02:00
Jay Satiro
6b39f9c87e schannel: Don't treat encrypted partial record as pending data
- Track when the cached encrypted data contains only a partial record
  that can't be decrypted without more data (SEC_E_INCOMPLETE_MESSAGE).

- Change Curl_schannel_data_pending to return false in such a case.

Other SSL libraries have pending data functions that behave similarly.

Ref: https://github.com/curl/curl/pull/1387

Closes https://github.com/curl/curl/pull/1392
2017-04-22 22:39:40 -04:00
Alan Jenkins
be299a4dba multi: clarify condition in curl_multi_wait
`if(nfds || extra_nfds) {` is followed by `malloc(nfds * ...)`.

If `extra_fs` could be non-zero when `nfds` was zero, then we have
`malloc(0)` which is allowed to return `NULL`. But, malloc returning
NULL can be confusing. In this code, the next line would treat the NULL
as an allocation failure.

It turns out, if `nfds` is zero then `extra_nfds` must also be zero.
The final value of `nfds` includes `extra_nfds`.  So the test for
`extra_nfds` is redundant.  It can only confuse the reader.

Closes #1439
2017-04-22 22:35:46 +02:00
Marcel Raad
4a8cf6c404
lib: fix maybe-uninitialized warnings
With -Og, GCC complains:

easy.c:628:7: error: ‘mcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:208:9: note: ‘tok_buf’ was declared here

../lib/strcase.h:35:29: error: ‘tok_buf’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
vauth/digest.c:566:15: note: ‘tok_buf’ was declared here

Fix this by initializing the variables.
2017-04-22 22:12:37 +02:00
Dan Fandrich
f761da76f6 gnutls: removed some code when --disable-verbose is configured
This reduces the binary size and fixes a compile warning.
2017-04-22 12:20:25 +02:00
Daniel Stenberg
cbae73e1dd llist: no longer uses malloc
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)

Also removed return codes since the llist functions can't fail now.

Test 1300 updated accordingly.

Closes #1435
2017-04-22 11:25:27 +02:00
Dan Fandrich
5f830eaba0 mbedtls: enable NTLM (& SMB) even if MD4 support is unavailable
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
2017-04-21 22:42:14 +02:00
Daniel Stenberg
da2af5c04d openssl: fix memory leak in servercert
... when failing to get the server certificate.
2017-04-20 15:46:03 +02:00
Marcel Raad
a4ff8a1a0e
nss: fix MinGW compiler warnings
This fixes 3 warnings issued by MinGW:
1. PR_ImportTCPSocket actually has a paramter of type PROsfd instead of
PRInt32, which is 64 bits on Windows. Fixed this by including the
corresponding header file instead of redeclaring the function, which is
supported even though it is in the private include folder. [1]
2. In 64-bit mode, size_t is 64 bits while CK_ULONG is 32 bits, so an explicit
narrowing cast is needed.
3. Curl_timeleft returns time_t instead of long since commit
21aa32d30d.

[1] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSPR/Reference/PR_ImportTCPSocket

Closes https://github.com/curl/curl/pull/1393
2017-04-18 16:38:04 +02:00
Jay Satiro
33cfcfd9f0 TLS: Fix switching off SSL session id when client cert is used
Move the sessionid flag to ssl_primary_config so that ssl and proxy_ssl
will each have their own sessionid flag.

Regression since HTTPS-Proxy support was added in cb4e2be. Prior to that
this issue had been fixed in 247d890, CVE-2016-5419.

Bug: https://github.com/curl/curl/issues/1341
Reported-by: lijian996@users.noreply.github.com

The new incarnation of this bug is called CVE-2017-7468 and is documented
here: https://curl.haxx.se/docs/adv_20170419.html
2017-04-18 07:56:34 +02:00
David Benjamin
997504ea50 openssl: don't try to print nonexistant peer private keys
X.509 certificates carry public keys, not private keys. Fields
corresponding to the private half of the key will always be NULL.

Closes #1425
2017-04-17 23:22:51 +02:00
David Benjamin
1c92b5b609 openssl: fix thread-safety bugs in error-handling
ERR_error_string with NULL parameter is not thread-safe. The library
writes the string into some static buffer. Two threads doing this at
once may clobber each other and run into problems. Switch to
ERR_error_string_n which avoids this problem and is explicitly
bounds-checked.

Also clean up some remnants of OpenSSL 0.9.5 around here. A number of
comments (fixed buffer size, explaining that ERR_error_string_n was
added in a particular version) date to when ossl_strerror tried to
support pre-ERR_error_string_n OpenSSLs.

Closes #1424
2017-04-17 23:20:30 +02:00