Previously it was checked for in configure/cmake, but that would then
leave other build systems built without engine support.
While engine support probably existed prior to 1.0.1, I decided to play
safe. If someone experience a problem with this, we can widen the
version check.
Fixes#2641Closes#2644
* enable it in `src/Makefile.m32`
* enable it in `winbuild/MakefileBuild.vc` if a custom manifest is
_not_ enabled via the existing `EMBED_MANIFEST` option
* enable it for all Windows CMake builds (also disable the built-in
minimal manifest, added by CMake by default.)
For other build systems, add the `-DCURL_EMBED_MANIFEST` option to
the list of RC (Resource Compiler) flags to enable the manifest
included in `src/curl.rc`. This may require to disable whatever
automatic or other means in which way another manifest is added to
`curl.exe`.
Notice that Borland C doesn't support this method due to a
long-pending resource compiler bug. Watcom C may also not handle
it correctly when the `-zm` `wrc` option is used (this option may
be unnecessary though) and regardless of options in certain earlier
revisions of the 2.0 beta version.
Closes https://github.com/curl/curl/pull/1221
Fixes https://github.com/curl/curl/issues/2591
- Move the CURL_WERROR option processing after the configuration checks
to avoid failures in case of warnings during the configuration checks.
This is a partial fix for #2358
Currently CMake cannot detect Brotli support. This adds detection of the
libraries and associated header files. It also adds this to the
generated config.
Closes#2392
Ensure HAVE_SETMODE is set to 1 on OSes that have setmode. Without this,
curl will corrupt binary files when writing them to stdout on Windows.
Closes https://github.com/curl/curl/pull/2067
The config files define curl and libcurl targets as imported targets
CURL::curl and CURL::libcurl. For backward compatibility with CMake-
provided find-module the CURL_INCLUDE_DIRS and CURL_LIBRARIES are
also set.
Closes#1879
When using CURL_WERROR in MSVC builds, the debug flags were overridden
by the release flags and /WX got added twice in debug mode.
Closes https://github.com/curl/curl/pull/1715
The MSVC warning level defaults to 3 in CMake. Change it to 4, which is
consistent with the Visual Studio and NMake builds. Disable level 4
warning C4127 for the library and additionally C4306 for the test
servers to get a clean CURL_WERROR build as that warning is raised in
some macros in older Visual Studio versions.
Ref: https://github.com/curl/curl/pull/1667#issuecomment-314082794
Closes https://github.com/curl/curl/pull/1711
Previously, one had to set MBEDTLS_INCLUDE_DIR to make CMake find the
headers, but the system complained that mbed TLS wasn't found due to
MBEDTLS_INCLUDE_DIRS (note the trailing s) was not set. This commit
attempts to fix that.
Closes https://github.com/curl/curl/pull/1541
Fixed a syntax error with setting cache variables (The type and
docstring were missing), resulting in build errors. Quoted the
CURL_CA_PATH and CURL_CA_BUNDLE otherwise the path was written without
quotes in C code, resulting in build errors.
Closes#1503
Signed-off-by: Akhil <akhil.kedia@samsung.com>
Also make Perl mandatory to allow building the docs.
While CMakeLists.txt could probably read the list of manual pages from
Makefile.am, actually putting those in CMakeLists.txt is cleaner so that
is what is done here.
Fixes#1230
Ref: https://github.com/curl/curl/pull/1288
- Change the encoding of the regex temp placeholder token to UTF-8.
Prior to this change the file contained special chars in a different
encoding than ASCII or UTF-8 making text editors and Python complain
when reading the file.
Closes https://github.com/curl/curl/pull/1271
Closes https://github.com/curl/curl/pull/1275
Define _WINSOCKAPI_ blank rather than to 1 in order to match the value
used by Microsoft's winsock header files.
Closes https://github.com/curl/curl/pull/1195
The OpenSSL function CRYTPO_cleanup_all_ex_data() cannot be called
multiple times without crashing - and other libs might call it! We
basically cannot call it without risking a crash. The function is a
no-op since OpenSSL 1.1.0.
Not calling this function only risks a small memory leak with OpenSSL <
1.1.0.
Bug: https://curl.haxx.se/mail/lib-2016-09/0045.html
Reported-by: Todd Short
The `curl-config --static-libs` command should not output paths like
-l/usr/lib/libssl.so, instead print the absolute path without `-l`.
This also removes the confusing message "Static linking is broken" which
was printed because curl-config --static-libs was disfunctional even
though the static libcurl.a library works properly.
Fixes https://github.com/curl/curl/issues/841
Detect support for compiler symbol visibility flags and apply those
according to CURL_HIDDEN_SYMBOLS option.
It should work true to the autotools build except it tries to unhide
symbols on Windows when requested and prints warning if it fails.
Ref: https://github.com/curl/curl/issues/981#issuecomment-242665951
Reported-by: Daniel Stenberg
All compilers used by cmake in Windows should support large files.
- Add test SIZEOF_OFF_T
- Remove outdated test SIZEOF_CURL_OFF_T
- Turn on USE_WIN32_LARGE_FILES in Windows
- Check for 'Largefile' during the features output
CMake build now using BUILD_TESTING=ON/OFF (default is OFF) to build
tests and enabling CTest integration. Options BUILD_CURL_TESTS and
BUILD_DASHBOARD_REPORTS was removed.
Closes#882
Reviewed-by: Brad King
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
Set CMAKE_REQUIRED_DEFINITIONS to include definitions needed to get
the winsock2 API from windows.h. Simplify the order of checks to
avoid extra conditions.
Use check_include_file instead of check_include_file_concat to look
for OpenSSL headers. They do not need to participate in a sequence
of dependent system headers. Also they may cause winsock.h to be
included before ws2tcpip.h, causing the latter to not be detected
in the sequence.
Reviewed-by: Brad King <brad.king@kitware.com>
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Fix detection of the AsynchDNS feature which not just depends on
pthreads support, but also on whether USE_POSIX_THREADS is set or not.
Caught by test 1014.
This patch adds a new ENABLE_THREADED_RESOLVER option (corresponding to
--enable-threaded-resolver of autotools) which also needs a check for
HAVE_PTHREAD_H.
For symmetry with autotools, CURL_USE_ARES is renamed to ENABLE_ARES
(--enable-ares). Checks that test for the availability actually use
USE_ARES instead as that is the result of whether a-res is available or
not (in practice this does not matter as CARES is marked as required
package, but nevertheless it is better to write the intent).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Otherwise Curl_gethostname always fails. Windows has gethostname
since Vista according to
http://msdn.microsoft.com/en-us/library/ms738527%28VS.85%29.aspx, but
accordings to byte_bucket's VC 2005 documentation, it is available even
in Windows 95. (possibly after installing a Platform SDK, the
Windows Server 2003 SP1 Platform SDK should be sufficient).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
autotools does not use features.h nor _BSD_SOURCE. As this macro
triggers warnings since glibc 2.20, remove it. It should not have
functional differences.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Initial work to generate a pkg-config and curl-config script. Static
linking (`curl-config --static-libs` and `pkg-config --shared --libs
libcurl`) is broken and therefore disabled.
CONFIGURE_OPTIONS does not make sense for CMake, use an empty string
for now.
At least `curl-config --features` and `curl-config --protocols` work
which is needed by runtests.pl.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
This matches the behavior from autotools. The auxiliary major, minor
and patch components are not needed anymore and therefore removed.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
For compatibility with autoconf, it will be used later for curl-config
and pkg-config. Not all features and or protocols can be enabled as
these are missing additional checks (see new TODOs).
SUPPORT_PROTOCOLS is partially scripted (grep for SUPPORT_PROTOCOLS=)
and manually verified/modified. SUPPORT_FEATURES is manually added.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
ENABLE_IPV6 depends on HAVE_GETADDRINFO or you will get a
Curl_getaddrinfo_ex error. Enable IPv6 by default, disabling it if
struct sockaddr_in6 is not found in netinet/in.h.
Note that HAVE_GETADDRINFO_THREADSAFE is still not set as it needs more
platform checks even though POSIX requires a thread-safe getaddrinfo.
Verified on Arch Linux x86_64 with glibc 2.20-2 and Linux 3.16-rc7.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Rather than always outputting an empty manual page for the '-M' option,
generate a full manual page as done by autotools. For simplicity in
CMake, always generate the gzipped page as it will not be used anyway
when zlib is not available.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
It tries hard to recognise SDK's on different platforms. On windows MIT
Kerberos installs SDK with other things and puts path into registry.
Heimdal have separate zip archive. On linux pkg-config is tried, then
krb5-config script and finally old-style libs and headers detection.
Command line args:
* CMAKE_USE_GSSAPI - enables GSSAPI detection
* GSS_ROOT_DIR - if set, should point to the root of GSSAPI installation
(the one with include and lib directories)
There is no need for such function. Include_directories propagate by
themselves and having a function with one simple link statement makes
little sense.
OpenLDAP might have been build with OpenSSL. Checking for OpenLDAP first
may result in undefined symbols. Of course, the found OpenSSL libraries
must also be linked whenever OpenLDAP is.
At this point I can build libcurl with OpenSSL, OpenLDAP and LibSSH2.
Supported protocols are at least:
HTTP, HTTPS, FTP, SFTP, TFTP, LDAP, LDAPS, POP3, SMTP
(those are the ones we have regression tests for
in our product's testsuite)
CMake 2.6 is already a bit old. Many bugs have been fixed since
its release. We use 2.8 in our company and we have no intention
of polluting our environment with old software, so 2.6 would
not be tested. This shouldn't be a problem since all one need
to build CMake from source is C and C++ compiler.
