All boolean options (such as -O, -I, -v etc), both short and long versions,
now always switch on/enable the option named. Using the same option multiple
times thus make no difference. To switch off one of those options, you need
to use the long version of the option and type --no-OPTION. Like to disable
verbose mode you use --no-verbose!
- Added --remote-name-all to curl, which if used changes the default for all
given URLs to be dealt with as if -O is used. So if you want to disable that
for a specific URL after --remote-name-all has been used, you muse use -o -
or --no-remote-name.
--keepalive-time to curl to set the keepalive probe interval. I also took
the opportunity to rename the recently added no-keep-alive option to
no-keepalive to keep a consistent naming and to avoid getting two dashes in
these option names. Eric also provided an update to the man page for the new
option.
spanking new CURLOPT_SEEKFUNCTION simply to take advantage of the improved
performance for the upload resume cases where you want to upload the last
few bytes of a very large file. To implement this decently, I had to switch
the client code for uploading from fopen()/fread() to plain open()/read() so
that we can use lseek() to do >32bit seeks (as fseek() doesn't allow that)
on systems that offer support for that.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.
The default SOCKS5 proxy is again back to sending the IP address to the
proxy. The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
is an inofficial PROXY4 variant that sends the hostname to the proxy instead
of the resolved address (which is already supported by SOCKS5). --socks4a is
the curl command line option for it and CURLOPT_PROXYTYPE can now be set to
CURLPROXY_SOCKS4A as well.
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 and the curl tool --hostpubmd5. They both make
the SCP or SFTP connection verify the remote host's md5 checksum of the public
key before doing a connect, to reduce the risk of a man-in-the-middle attack.
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
(http://curl.haxx.se/bug/view.cgi?id=1740263). Adam discovered that when
getting a large amount of URLs with curl, they were fetched slower and
slower... which turned out to be because the --libcurl data collecting which
wrongly always was enabled, but no longer is...
pointed out that the warnf() function in the curl tool didn't properly deal
with the cases when excessively long words were used in the string to chop
up.
by letting configure check for setmode and ifdef on HAVE_SETMODE. NOTE: non-
configure platforms that havve setmode() needs their hard-coded config.h files
fixed. I fixed the src/config-win32.h.
part of the official libcurl API http://curl.haxx.se/lxr/source/lib/README.curlx
The documented way of using them would be to use timeval.c as a source code file.
The above described method works very well when statically linking libcurl and
apps, curl tool, but has several drawbacks when you build a true shared
libcurl (i.e. Name space clash at linkage stage as functions are defined more
than once. Windows makefiles are not capable of handling this system of
source-level sharing)
So...
Now curlutil.h and curlutil.c define and implement cutil_tvnow and cutil_tvdiff
which replace curlx_tvnow and curlx_tvdiff for the curl tool. Doing this we
avoid the above described problems.
to the debug callback.
- Shmulik Regev added CURLOPT_HTTP_CONTENT_DECODING and
CURLOPT_HTTP_TRANSFER_DECODING that if set to zero will disable libcurl's
internal decoding of content or transfer encoded content. This may be
preferable in cases where you use libcurl for proxy purposes or similar. The
command line tool got a --raw option to disable both at once.
ordinary curl command line, and you will get a libcurl-using source code
written to the file that does the equivalent operation of what your command
line operation does!
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it
will make libcurl shutdown SSL/TLS after the authentication is done on a
FTP-SSL operation.
could very well cause a negate number get passed in and thus cause reading
outside of the array usually used for this purpose.
We avoid this by using the uppercase macro versions introduced just now that
does some extra crazy typecasts to avoid byte codes > 127 to cause negative
int values.
to the CURLOPT_DEBUGFUNCTION callback has been fixed (it was erroneously
included as part of the header). A message was also added to the
command line tool to show when data is being sent, enabled when
--verbose is used.
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
--enable-debug, as then curl used free() on memory allocated both with
normal malloc() and with libcurl-provided functions, when the latter MUST be
freed with curl_free() in debug builds.
type to the already provided type CURLPROXY_SOCKS4.
I added a --socks4 option that works like the current --socks5 option but
instead use the socks4 protocol.
curl tool with --local-port. Plain and simply set the range of ports to bind
the local end of connections to. Implemented on to popular demand.
Not extensively tested. Please let me know how it works.
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(http://curl.haxx.se/bug/view.cgi?id=1337723) that curl could not upload
binary data from stdin on Windows if the data contained control-Z (hex 1a)
since that is treated as end-of-file when read in text mode. Gisle Vanem
pointed out the fix, and I made both -T and --data-binary take advantage of
it.
in the man page, curl would send an invalid HTTP Range: header. The correct
way would be to use "-r [number]-" or even "-r -[number]". Starting now,
curl will warn if this is discovered, and automatically append a dash to the
range before passing it to libcurl.
glibc versions, and with this patch applied it no longer shows up to me. The
problem was indeed a flaw that made curl use a file handle already closed.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
fails to open/read files etc to help users diagnose why it doesn't do what
you'd expect it to. Converted lots of old messages to use the new generic
function I wrote for this purpose.
--trace, --trace-ascii and --verbose output. I also made the '>' display
separate each line on the linefeed so that HTTP requests etc look nicer in the
-v output.
