This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
target called 'filecheck' so that if you run 'make filecheck' in this directory
it'll check if the local files are also mentioned in the Makefile.am so that
they are properly included in release archives!
function do wrong on all input bytes that are >= 0x80 (decimal 128) due to a
signed / unsigned mistake in the code. I fixed it and added test case 543 to
verify.
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
- Bug report #1792649 (http://curl.haxx.se/bug/view.cgi?id=1792649) pointed
out a problem with doing an empty upload over FTP on a re-used connection.
I added test case 541 to reproduce it and to verify the fix.
- I noticed while writing test 541 that the FTP code wrongly did a CWD on the
second transfer as it didn't store and remember the "" path from the
previous transfer so it would instead CWD to the entry path as stored. This
worked, but did a superfluous command. Thus, test case 541 now also verifies
this fix.
out that libcurl didn't deal with large responses from server commands, when
the single response was consisting of multiple lines but of a total size of
16KB or more. Dan Fandrich improved the ftp test script and provided test
case 1006 to repeat the problem, and I fixed the code to make sure this new
test case runs fine.
out that libcurl didn't deal with very long (>16K) FTP server response lines
properly. Starting now, libcurl will chop them off (thus the client app will
not get the full line) but survive and deal with them fine otherwise. Test
case 1003 was added to verify this.
(http://curl.haxx.se/bug/view.cgi?id=1776235) about ftp requests with NOBODY
on a directory would do a "SIZE (null)" request. This is now fixed and test
case 1000 was added to verify.
after 7.16.2. This is much due to the different treatment file:// gets
internally, but now I added test 231 to make it less likely to happen again
without us noticing!
supports only ftps:// URLs with --ftp-ssl-control specified, which
implicitly encrypts the control channel but not the data channels. That
allows stunnel to be used with an unmodified ftp server in exactly the
same way that the test https server is set up.
Added test case 400 as a basic FTPS test.
something went wrong like it got a bad response code back from the server,
libcurl would leak memory. Added test case 538 to verify the fix.
I also noted that the connection would get cached in that case, which
doesn't make sense since it cannot be re-use when the authentication has
failed. I fixed that issue too at the same time, and also that the path
would be "remembered" in vain for cases where the connection was about to
get closed.
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
case when 401 or 407 are returned, *IF* no auth credentials have been given.
The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401
and 407 cases when auth credentials is given, but we've now covered this
somewhat more.
You might get some amounts of headers transferred before this situation is
detected, like for when a "100-continue" is received as a response to a
POST/PUT and a 401 or 407 is received immediately afterwards.
Added test 281 to verify this change.
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
(http://curl.haxx.se/bug/view.cgi?id=1561470) that is said to crash when an
FTP upload fails with the multi interface. It did not, but I made a failed
upload still assume the control connection to be fine.
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
never happen in a sane world, libcurl previously got into an infinite loop
when this occurred. Dave added test 273 to verify this.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
with CURLOPT_PROXY can use a http:// prefix and user + password. The user
and password fields are now also URL decoded properly.
Test case 264 added to verify.
address was not possible to use. It is now, but requires it written
RFC2732-style, within brackets - which incidently is how you enter numerical
IPv6 addresses in URLs. Test case 263 added to verify.
binary zeroes within the headers. They confused libcurl to do wrong so the
downloaded headers become incomplete. The fix is now verified with test case
262.
.netrc, and when following a Location: the subsequent requests didn't properly
use the auth as found in the netrc file. Added test case 257 to verify my fix.
level stuff. The FTP server communicates with sockfilt using perl's open2().
This enables easier IPv6 support and hopefully FTP-SSL support in the future.
Added four test cases for FTP-ipv6.
also affecting NTLM and Negotiate.) It turned out that if the server responded
with 100 Continue before the initial 401 response, libcurl didn't take care of
the response properly. Test case 245 and 246 added to verify this.
function was fixed to use the proper proxy authentication when multiple ones
were added as accepted. test 239 and test 243 were added to repeat the
problems and verify the fixes.
file got a Last-Modified: header written to the data stream, corrupting the
actual data. This was because some conditions from the previous FTP code was
not properly brought into the new FTP code. I fixed and I added test case 520
to verify. (This bug was introduced in 7.13.1)
on the remote side. This then converts the operation to an ordinary STOR
upload. This was requested/pointed out by Ignacio Vazquez-Abrams.
It also proved (and I fixed) a bug in the newly rewritten ftp code (and
present in the 7.13.1 release) when trying to resume an upload and the servers
returns an error to the SIZE command. libcurl then loops and sends SIZE
commands infinitely.
requested data from a host and then followed a redirect to another
host. libcurl then didn't use the proxy-auth properly in the second request,
due to the host-only check for original host name wrongly being extended to
the proxy auth as well. Added test case 233 to verify the flaw and that the
fix removed the problem.
present in RFC959... so now (lib)curl supports it as well. --ftp-account and
CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an account
string after PASS have been sent away. The client responds with "ACCT [account
string]".) Added test case 228 and 229 to verify the functionality. Updated
the test FTP server to support ACCT somewhat.
contains %0a or %0d in the user, password or CWD parts. (A future fix would
include doing it for %00 as well - see KNOWN_BUGS for details.) Test case 225
and 226 were added to verify this
If EPSV, EPRT or LPRT is tried and doesn't work, it will not be retried on
the same server again even if a following request is made using a persistent
connection.
If a second request is made to a server, requesting a file from the same
directory as the previous request operated on, libcurl will no longer make
that long series of CWD commands just to end up on the same spot. Note that
this is only for *exactly* the same dir. There is still room for improvements
to optimize the CWD-sending when the dirs are only slightly different.
Added test 210, 211 and 212 to verify these changes. Had to improve the
test script too and added a new primitive to the test file format.
file that was already completely downloaded caused an error, while it
doesn't if you don't use --fail! I added test case 194 to verify the fix.
Grrr. CURLOPT_FAILONERROR is now added to the list stuff to remove in
libcurl v8 due to all the kludges needed to support it.
CURLOPT_FOLLOWLOCATION, libcurl reported error if a redirect happened even if
the new URL would provide the resumed file. Test case 188 added to verify the
fix (together with existing test 99).
replacement, curl only replaced the Host: header on the initial request
and didn't replace it on the following ones. This resulted in requests with
two Host: headers.
Now, curl checks if the location is on the same host as the initial request
and then continues to replace the Host: header. And when it moves to another
host, it doesn't replace the Host: header but it also doesn't make the
second Host: header get used in the request.
This change is verified by the two new test cases 184 and 185.
