Depend on the known behaviour of URLs for nonexistent files rather than
the undefined behaviour of URLs for directories (which fails on Windows).
The test isn't about file: URLs at all, so the URL used doesn't really
matter.
If a % ended the statement, the string's trailing NUL would be skipped
and memory past the end of the buffer would be accessed and potentially
displayed as part of the --write-out output. Added tests 1440 and 1441
to check for this kind of condition.
Reported-by: Brian Carpenter
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
Test 1903 is doing HTTP pipelining, and that is a timing and ordering
sensitive operation and this fails far too often on the Travis CI
leading to people more or less ignoring test failures there. Not good.
The end of pipelning is probably coming sooner rather than later
anyway...
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
This is likely to be the case when building from a tar ball release
package which includes a prebuilt man page. In that case, test the
packaged man page instead. This only makes a difference when building
out-of-tree (in-tree, the location in both cases is identical).
The character set in POSIX is set by the locale defined by (in
decreasing order of precedence) the LC_ALL, LC_CTYPE and LANG
environment variables (CHARSET was used by libidn but not libidn2).
LC_ALL is cleared to ensure that LC_CTYPE takes effect, but LC_ALL is
not used to set the locale to ensure that other parts of the locale
aren't overridden. Since there doesn't seem to be a cross-platform way
of specifying a UTF-8 locale, and not all systems may support UTF-8, a
<precheck> is used to skip the test if UTF-8 can't be verified to be
available. Test 1035 was also converted to UTF-8 for consistency, as
the actual character set used there is irrelevant to the test.
This patch uses a different UTF-8 locale than the last attempt, namely
en_US.UTF-8. This one has been verified on 7 different Linux and BSD
distributions and is more complete and usable than the locale UTF-8 (on
at least some systems).
This reverts commit ecd1d020ab.
That commit caused test failures on my Debian Linux machine for all
changed test cases. We need to reconsider how that should get done.
Character set in POSIX is set by the locale defined (in decreasing order
of precedence) by the LC_ALL, LC_CTYPE and LANG environment variables (I
believe CHARSET is only historic). LC_ALL is cleared to ensure that
LC_CTYPE takes effect, but LC_ALL is not used to set the locale to
ensure that other parts of the locale aren't overriden, if set. Since
there doesn't seem to be a cross-platform way of specifying a UTF-8
locale, and not all systems may support UTF-8, a <precheck> is used
(where relevant) to skip the test if UTF-8 isn't in use. Test 1035 was
also converted to UTF-8 for consistency, as the actual character set
used there is irrelevant to the test.
- on the first invocation: keep security context returned by
InitializeSecurityContext()
- on subsequent invocations: use MakeSignature() instead of
InitializeSecurityContext() to generate HTTP digest response
Bug: https://github.com/curl/curl/issues/870
Reported-by: Andreas Roth
Closes https://github.com/curl/curl/pull/1251
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
- While negotiating auth during PUT/POST if a user-specified
Content-Length header is set send 'Content-Length: 0'.
This is what we do already in HTTPREQ_POST_FORM and what we did in the
HTTPREQ_POST case (regression since afd288b).
Prior to this change no Content-Length header would be sent in such a
case.
Bug: https://curl.haxx.se/mail/lib-2017-02/0006.html
Reported-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/1242
This repairs cookies for localhost.
Non-PSL builds will now only accept "localhost" without dots, while PSL
builds okeys everything not listed as PSL.
Added test 1258 to verify.
This was a regression brought in a76825a5ef
Under condition using http_proxy env var, noproxy list was the
combination of --noproxy option and NO_PROXY env var previously. Since
this commit, --noproxy option overrides NO_PROXY environment variable
even if use http_proxy env var.
Closes#1140
The combination of --noproxy option and http_proxy env var works well
both for proxied hosts and non-proxied hosts.
However, when combining NO_PROXY env var with --proxy option,
non-proxied hosts are not reachable while proxied host is OK.
This patch allows us to access non-proxied hosts even if using NO_PROXY
env var with --proxy option.
Follow-up to 3463408.
Prior to 3463408 file:// hostnames were silently stripped.
Prior to this commit it did not work when a schemeless url was used with
file as the default protocol.
Ref: https://curl.haxx.se/mail/lib-2016-11/0081.html
Closes https://github.com/curl/curl/pull/1124
Also fix for drive letters:
- Support --proto-default file c:/foo/bar.txt
- Support file://c:/foo/bar.txt
- Fail when a file:// drive letter is detected and not MSDOS/Windows.
Bug: https://github.com/curl/curl/issues/1187
Reported-by: Anatol Belski
Assisted-by: Anatol Belski
Follow-up to 82245ea: Fix the example program sendrecv.c (handle
CURLE_AGAIN, handle incomplete send). Improve the documentation
for curl_easy_recv() and curl_easy_send().
Reviewed-by: Frank Meier
Assisted-by: Jay Satiro
See https://github.com/curl/curl/pull/1134
A server MUST NOT send any Transfer-Encoding or Content-Length header
fields in a 2xx (Successful) response to CONNECT. (RFC 7231 section
4.3.6)
Also fixes the three test cases that did this.
If a port number in a "connect-to" entry does not match, skip this
entry instead of connecting to port 0.
If a port number in a "connect-to" entry matches, use this entry
and look no further.
Reported-by: Jay Satiro
Assisted-by: Jay Satiro, Daniel Stenberg
Closes#1148
We're mostly saying just "curl" in lower case these days so here's a big
cleanup to adapt to this reality. A few instances are left as the
project could still formally be considered called cURL.
- Call Curl_initinfo on init and duphandle.
Prior to this change the statistical and informational variables were
simply zeroed by calloc on easy init and duphandle. While zero is the
correct default value for almost all info variables, there is one where
it isn't (filetime initializes to -1).
Bug: https://github.com/curl/curl/issues/1103
Reported-by: Neal Poole
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
Cokie with the same domain but different tailmatching property are now
considered different and do not replace each other. If header contains
following lines then two cookies will be set: Set-Cookie: foo=bar;
domain=.foo.com; expires=Thu Mar 3 GMT 8:56:27 2033 Set-Cookie: foo=baz;
domain=foo.com; expires=Thu Mar 3 GMT 8:56:27 2033
This matches Chrome, Opera, Safari, and Firefox behavior. When sending
stored tokens to foo.com Chrome, Opera, Firefox store send them in the
stored order, while Safari pre-sort the cookies.
Closes#1050
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether
sending the request body shall be completed when the server responds
early with an error status code.
This is suitable for manual NTLM authentication.
Reviewed-by: Jay Satiro
Closes https://github.com/curl/curl/pull/904
.. and add that --proto-redir and CURLOPT_REDIR_PROTOCOLS do not
override protocols denied by --proto and CURLOPT_PROTOCOLS.
- Add a test to enforce: --proto deny must override --proto-redir allow
Closes https://github.com/curl/curl/pull/1031
... like when a HTTP/0.9 response comes back without any headers at all
and just a body this now prevents that body from being sent to the
callback etc.
Adapted test 1144 to verify.
Fixes#973
Assisted-by: Ray Satiro
This only excludes building unit tests from default build ( 'all' Make
target or "Build Solution" in VisualStudio). The projects and Make
targets will still be generated and shown in supporting IDEs.
Fixes https://github.com/curl/curl/issues/981
Reported-by: Randy Armstrong
Closes https://github.com/curl/curl/pull/990
Detect support for compiler symbol visibility flags and apply those
according to CURL_HIDDEN_SYMBOLS option.
It should work true to the autotools build except it tries to unhide
symbols on Windows when requested and prints warning if it fails.
Ref: https://github.com/curl/curl/issues/981#issuecomment-242665951
Reported-by: Daniel Stenberg
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as
more of a generic "failed to parse" introduce an alias without FTP in
the name.
Closes https://github.com/curl/curl/pull/975
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
This fixes tests that were added after 113f04e664 as the tests would
fail otherwise.
We bring back "Proxy-Connection: Keep-Alive" now unconditionally to fix
regressions with old and stupid proxies, but we could possibly switch to
using it only for CONNECT or only for NTLM in a future if we want to
gradually reduce it.
Fixes#954
Reported-by: János Fekete
CMake build now using BUILD_TESTING=ON/OFF (default is OFF) to build
tests and enabling CTest integration. Options BUILD_CURL_TESTS and
BUILD_DASHBOARD_REPORTS was removed.
Closes#882
Reviewed-by: Brad King
The HTTP/2 tests brought with commit bf05606ef1 were using the internal
name 'http2' for the HTTP/2 server, while in fact that name was already
used for the second instance of the HTTP server. This made tests using
the second instance (like test 2050) fail after a HTTP/2 test had run.
The server is now known as HTTP/2 internally and within the <server>
section in test cases. 1700, 1701 and 1702 were updated accordingly.
It requires that 'nghttpx' is in the PATH, and it will run the tests
using nghttpx as a front-end proxy in front of the standard HTTP/1 test
server. This uses HTTP/2 over plain TCP.
If you like me have nghttpx installed in a custom path, you can run test 1700
like this:
$ PATH=$PATH:$HOME/build-nghttp2/bin/ ./runtests.pl 1700
Mostly in order to support broken web sites that redirect to broken URLs
that are accepted by browsers.
Browsers are typically even more leniant than this as the WHATWG URL
spec they should allow an _infinite_ amount. I tested 8000 slashes with
Firefox and it just worked.
Added test case 1141, 1142 and 1143 to verify the new parser.
Closes#791
Prior to this change a width arg could be erroneously output, and also
width and precision args could not be used together without crashing.
"%0*d%s", 2, 9, "foo"
Before: "092"
After: "09foo"
"%*.*s", 5, 2, "foo"
Before: crash
After: " fo"
Test 557 is updated to verify this and more
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
It does open up a miniscule risk that one of the other protocols that
libcurl could use would send back a Content-Disposition header and then
curl would act on it even if not HTTP.
A future mitigation for this risk would be to allow the callback to ask
libcurl which protocol is being used.
Verified with test 1312
Closes#760
This script now also scans src/tool_getparam.c, docs/curl.1 and
src/tool_help.c and will warn if any of them lists a command line option
not mentioned in one of the other places.
While being debated (in #716) and a violation of RFC 7230 section 5.4,
this test verifies that the existing functionality works as intended. It
strips the dot from the host name and uses the host without dot
throughout the internals.
... for checking ability to receive full HTTP response when POST request
is used with slow read callback function.
This test checks for bug #657 and verifies the work-around from
72d5e144fb.
Closes#720
