Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
In commit c834213ad5 we re-used some obsolete error codes, and here are
two defines that makes sure existing source codes that happen to use any
of these deprecated ones will still compile.
As usual, define CURL_NO_OLDIES to avoid getting these "precaution
defines".
1- Two new error codes are introduced.
CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of
FTP server connected.
CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts.
Neither of these errors are considered fatal and control connection
remains OK because it could just be a firewall blocking server to
connect to the client.
2- One new setopt option was introduced.
CURLOPT_ACCEPTTIMEOUT_MS
It sets the maximum amount of time FTP client is going to wait for a
server to connect. Internal default accept timeout is 60 seconds.
When working with the Android Standalone Toolchain the compiler defines
this macro:
/path/to/arm-linux-androideabi-gcc -E -dM - < /dev/null \
| grep -i android
#define __ANDROID__ 1
We really need to check both ANDROID and __ANDROID__ since I've observed
that:
* if you use Android.mk file(s) and the 'ndk-build' script (aka vanilla
way), ANDROID is predefined (see -DANDROID extra C flag),
* if you use the Android Standalone Toolchain, then __ANDROID__ is
predefined as stated by the compiler
There might be situations where a user would want to unset this option.
Avoid forcing him/her to cast the NULL argument to (char *) in order to
get past the compile time typecheck.
Don't even declare the struct members for disabled features
Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface
when trying to set a sharing option that has been disabled (or not
enabled) in the library.
Allow (*curl_write_callback) write callbacks to return
CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions
inside the callback itself.
Allow compilation of libcurl and curl using BSD-style lwIP on Win32.
In order to compile libcurl and curl with this support it is necessary
to edit files lib/config-win32.h and src/config-win32.h and uncomment
a line to make definition of preprocessor symbol USE_LWIPSOCK visible.
Afterwards you can compile as usual.
In order to use compiled library with BSD-style lwIP TCP/IP stack in
your program it is mandatory that you include lwIP header file <lwip/opt.h>
before including <curl/curl.h> or <curl/multi.h>
Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.ziphttp://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
Have fun!
Introduced the initial setup to allow closesocket callbacks by making
sure sclose() is only ever called from one place in the libcurl source
and still run all test cases fine.
Made the public headers checksrc compliant
Removed types.h (it's been unused since April 2004)
Made the root makefile do make in include by default as well, so that
TAGS and the checksrc will work better.
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
Encoding in HTTP requests (if built zlib enabled). I also renamed
CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
around) to reduce the confusion when we have to encoding options for
HTTP.
--tr-encoding is now the new command line option for curl to request
this, and thus I updated the test cases accordingly.
Stop the abuse of CURLE_FAILED_INIT as return code for things not being
init related by introducing two new return codes:
CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
several years. It is used for returning error when something is
attempted to be used but the feature/option was not enabled or
explictitly disabled at build-time. Getting this error mostly means that
libcurl needs to be rebuilt.
CURLE_FAILED_INIT is now saved and used strictly for init
failures. Getting this problem means something went seriously wrong,
like a resource shortage or similar.
CURLE_UNKNOWN_OPTION is the option formerly known as
CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
separately defined to be removed in a very distant future). This error
code is meant to be used to return when an option is given to libcurl
that isn't known. This problem would mostly indicate a problem in the
program that uses libcurl.
Introducing a few CURL_SOCKOPT* defines for conveniance. The new
CURL_SOCKOPT_ALREADY_CONNECTED signals to libcurl that the socket is to
be treated as already connected and thus it will skip the connect()
call.
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
was only being raised when an internal error occurred while allocating
or setting the GnuTLS SRP client credentials struct. For TLS
authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
appropriate; its error string already includes "passwords" as a possible
cause. Having a separate TLS auth error code might also cause people to
think that a TLS auth failure means the wrong username or password was
entered, when it could also be a sign of a man-in-the-middle attack.
This is a meta symbol. OR this value together with a single specific
auth value to force libcurl to probe for un-restricted auth and if not,
only that single auth algorithm is acceptable.
For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
first probe for what method to use, but yet only consider Digest to be
acceptable.
Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
libcurl explicitly use Digest right away and not do any probing.
CURLOPT_RESOLVE is a new option that sends along a curl_slist with
name:port:address sets that will populate the DNS cache with entries so
that request can be "fooled" to use another host than what otherwise
would've been used. Previously we've encouraged the use of Host: for
that when dealing with HTTP, but this new feature has the added bonus
that it allows the name from the URL to be used for TLS SNI and server
certificate name checks as well.
This is a first change. Surely more will follow to make it decent.
I added all OBJECTPOINT curl_easy_setopt() options from 178 to 202. Left
to add: the five FUNCTIONPOINT (callbacks) options added since:
SSH_KEYFUNCTION
INTERLEAVEFUNCTION
CHUNK_BGN_FUNCTION
CHUNK_END_FUNCTION
FNMATCH_FUNCTION
command is a special "hack" used by the drftpd server, but even though it is
a custom extension I've deemed it fine to add to libcurl since this server
seems to survive and people keep using it and want libcurl to support
it. The new libcurl option is named CURLOPT_FTP_USE_PRET, and it is also
usable from the curl tool with --ftp-pret. Using this option on a server
that doesn't support this command will make libcurl fail.
the define CURL_MAX_HTTP_HEADER which is even exposed in the public header
file to allow for users to fairly easy rebuild libcurl with a modified
limit. The rationale for a fixed limit is that libcurl is realloc()ing a
buffer to be able to put a full header into it, so that it can call the
header callback with the entire header, but that also risk getting it into
trouble if a server by mistake or willingly sends a header that is more or
less without an end. The limit is set to 100K.
Fix OS400 makefile for tests to use the new Makefile.inc in libtest
Update the OS400 wrappers and RPG binding according to the current CVS source state
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
Chen pointed out how curl couldn't upload with resume when reading from a
pipe.
This ended up with the introduction of a new return code for the
CURLOPT_SEEKFUNCTION callback that basically says that the seek failed but
that libcurl may try to resolve the situation anyway. In our case this means
libcurl will attempt to instead read that much data from the stream instead
of seeking and that way curl can now upload with resume when data is read
from a stream!
non-configured libcurl. In this case curl_off_t data type was gated
to the off_t data type which depends on the _FILE_OFFSET_BITS. This
configuration is exactly the unwanted configuration for our curl_off_t
data type which must not depend on such setting. This breaks ABI for
libcurl libraries built with Sun compilers which were built without
having run the configure script with _FILE_OFFSET_BITS different than
64 and using the ILP32 data model.
(http://curl.haxx.se/docs/adv_20090303.html also known as CVE-2009-0037) in
which previous libcurl versions (by design) can be tricked to access an
arbitrary local/different file instead of a remote one when
CURLOPT_FOLLOWLOCATION is enabled. This flaw is now fixed in this release
together this the addition of two new setopt options for controlling this
new behavior:
o CURLOPT_REDIR_PROTOCOLS controls what protocols libcurl is allowed to
follow to when CURLOPT_FOLLOWLOCATION is enabled. By default, this option
excludes the FILE and SCP protocols and thus you nee to explicitly allow
them in your app if you really want that behavior.
o CURLOPT_PROTOCOLS controls what protocol(s) libcurl is allowed to fetch
using the primary URL option. This is useful if you want to allow a user or
other outsiders control what URL to pass to libcurl and yet not allow all
protocols libcurl may have been built to support.
plain FTP connections, and it will then allow MKD to fail once and retry the
CWD afterwards. This is especially useful if you're doing many simultanoes
connections against the same server and they all have this option enabled,
as then CWD may first fail but then another connection does MKD before this
connection and thus MKD fails but trying CWD works! The numbers can
(should?) now be set with the convenience enums now called
CURLFTP_CREATE_DIR and CURLFTP_CREATE_DIR_RETRY.
Tests has proven that if you're making an application that uploads a set of
files to an ftp server, you will get a noticable gain in speed if you're
using multiple connections and this option will be then be very useful.
the condition in the previous request was unmet. This is typically a time
condition set with CURLOPT_TIMECONDITION and was previously not possible to
reliably figure out. From bug report #2565128
(http://curl.haxx.se/bug/view.cgi?id=2565128)
version 1.1 instead of 1.0 like before. This change also introduces the new
proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.
I updated all test cases cases that use CONNECT and I tried to do some using
--proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
these.
They basically offer the same thing the NO_PROXY environment variable only
offered previously: list a set of host names that shall not use the proxy
even if one is specified.
there are servers "out there" that relies on the client doing this broken
Digest authentication. Apache even comes with an option to work with such
broken clients.
The difference is only for URLs that contain a query-part (a '?'-letter and
text to the right of it).
libcurl now supports this quirk, and you enable it by setting the
CURLAUTH_DIGEST_IE bit in the bitmask you pass to the CURLOPT_HTTPAUTH or
CURLOPT_PROXYAUTH options. They are thus individually controlled to server
and proxy.
make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding
these new options is that they have no problems with the colon separator
that the CURLOPT_PROXYUSERPWD option does.
curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of
deprecates the good old CURLOPT_USERPWD since they allow applications to set
the user name and password independently and perhaps more importantly allow
both to contain colon(s) which CURLOPT_USERPWD doesn't fully support.
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
don't define CURL_NO_OLDIES). This option allows you to now also change the
libcurl behavior for a HTTP response 302 after a POST to not use GET in the
subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
patch somewhat before commit. The curl tool got a matching --post302
option. Test case 1076 was added to verify this.
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS
or FTPS), libcurl will gather lots of server certificate info and that info
can then get extracted by a client after the request has completed with
curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing
helped me test and smoothen out this feature.
Unfortunately, this feature currently only works with libcurl built to use
OpenSSL.
This feature was sponsored by networking4all.com - thanks!
the names of the curl_off_t formatting string directives now become
CURL_FORMAT_CURL_OFF_T and CURL_FORMAT_CURL_OFF_TU.
CURL_FMT_OFF_T -> CURL_FORMAT_CURL_OFF_T
CURL_FMT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
Remove the use of an internal name for the curl_off_t formatting string directives
and use the common one available from the inside and outside of the library.
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
parser to allow numerical IPv6-addresses to be specified with the scope
given, as per RFC4007 - with a percent letter that itself needs to be URL
escaped. For example, for an address of fe80::1234%1 the HTTP URL is:
"http://[fe80::1234%251]/"
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
curl_easy_getinfo. It returns a pointer to a string with the most recently
used IP address. Modified test case 500 to also verify this feature. The
implementing of this feature was sponsored by Lenny Rachitsky at NeuStar.
_ Updated packages/OS400/curl.inc.in with new definitions.
_ New connect/bind/sendto/recvfrom wrappers to support AF_UNIX sockets.
_ Include files line length shortened below 100 chars.
_ Const parameter in lib/qssl.[ch].
_ Typos in packages/OS400/initscript.sh.
and receive data over a connection previously setup with curl_easy_perform()
and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to
show how they can be used.
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
introduce the new CURLINFO_REDIRECT_URL option that lets applications
extract the URL libcurl would've redirected to if it had been told to. This
then enables the application to continue to that URL as it thinks is
suitable, without having to re-implement the magic of creating the new URL
from the Location: header etc. Test 1029 verifies it.
application to provide data for a multipart with the read callback. Note
that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the
stream option is used. This feature is verified by the new test case
554. This feature was sponsored by Xponaut.
does nothing with them, just to make sure libcurl users always use three
arguments to this function. Due to its use of ... for the third argument, it
is otherwise hard to detect abuse.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.
The default SOCKS5 proxy is again back to sending the IP address to the
proxy. The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
made it an unsigned int. The type was only used in the curl_sockaddr struct
definition (only used by the curl_opensocket_callback). On all platforms I
could find information about, socklen_t is 32 unsigned bits large so I don't
think this will break the API or ABI. The main reason for this change is of
course for all the platforms that don't have a socklen_t definition in their
headers to build fine again. Providing our own configure magic and custom
definition of socklen_t on those systems proved to work but was a lot of
cruft, code and extra magic needed - when this very small change of type seems
harmless and still solves the missing socklen_t problem.
is an inofficial PROXY4 variant that sends the hostname to the proxy instead
of the resolved address (which is already supported by SOCKS5). --socks4a is
the curl command line option for it and CURLOPT_PROXYTYPE can now be set to
CURLPROXY_SOCKS4A as well.
the appending of the "type=" thing on FTP URLs when they are passed to a
HTTP proxy. Some proxies just don't like that appending (which is done
unconditionally in 7.17.1), and some proxies treat binary/ascii transfers
better with the appending done!
out a problem in curl.h when building C++ apps with MSVC. To fix it, the
inclusion of header files in curl.h is moved outside of the C++ extern "C"
linkage block.
CURLOPT_OPENSOCKETDATA to set a callback that allows an application to replace
the socket() call used by libcurl. It basically allows the app to change
address, protocol or whatever of the socket. (I also did some whitespace
indent/cleanups in lib/url.c which kind of hides some of these changes, sorry
for mixing those in.)
CURLE_PEER_FAILED_VERIFICATION (standard CURL_NO_OLDIES style), and made this
return code get used by the previous SSH MD5 fingerprint check in case it
fails.
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 and the curl tool --hostpubmd5. They both make
the SCP or SFTP connection verify the remote host's md5 checksum of the public
key before doing a connect, to reduce the risk of a man-in-the-middle attack.
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
and allow reuse by multiple protocols. Several unused error codes were
removed. In all cases, macros were added to preserve source (and binary)
compatibility with the old names. These macros are subject to removal at
a future date, but probably not before 2009. An application can be
tested to see if it is using any obsolete code by compiling it with the
CURL_NO_OLDIES macro defined.
Documented some newer error codes in libcurl-error(3)
passed to it with curl_easy_setopt()! Previously it has always just refered
to the data, forcing the user to keep the data around until libcurl is done
with it. That is now history and libcurl will instead clone the given
strings and keep private copies.
and CURLOPT_NEW_DIRECTORY_PERMS. These control the premissions for files
and directories created on the remote server. CURLOPT_NEW_FILE_PERMS
defaults to 0644 and CURLOPT_NEW_DIRECTORY_PERMS defaults to 0755
because I just made SCP uploads return this value if the file size of
the upload file isn't given with CURLOPT_INFILESIZE*. Docs updated to
reflect this news, and a define for the old name was added to the public
header file.
function that deprecates the curl_multi_socket() function. Using the new
function the application tell libcurl what action that was found in the
socket that it passes in. This gives a significant performance boost as it
allows libcurl to avoid a call to poll()/select() for every call to
curl_multi_socket*().
to the debug callback.
- Shmulik Regev added CURLOPT_HTTP_CONTENT_DECODING and
CURLOPT_HTTP_TRANSFER_DECODING that if set to zero will disable libcurl's
internal decoding of content or transfer encoded content. This may be
preferable in cases where you use libcurl for proxy purposes or similar. The
command line tool got a --raw option to disable both at once.
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the
timeouts with millisecond resolution instead. The only restriction to that
is the alarm() (sometimes) used to abort name resolves as that uses full
seconds. I fixed the FTP response timeout part of the patch.
Internally we now count and keep the timeouts in milliseconds but it also
means we multiply set timeouts with 1000. The effect of this is that no
timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which
equals 24.86 days. We probably couldn't before either since the code did
*1000 on the timeout values on several places already.
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it
will make libcurl shutdown SSL/TLS after the authentication is done on a
FTP-SSL operation.
and while doing so it became apparent that the current timeout system for
the socket API really was a bit awkward since it become quite some work to
be sure we have the correct timeout set.
Jeff then provided the new CURLMOPT_TIMERFUNCTION that is yet another
callback the app can set to get to know when the general timeout time
changes and thus for an application like hiperfifo.c it makes everything a
lot easier and nicer. There's a CURLMOPT_TIMERDATA option too of course in
good old libcurl tradition.
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
-fvisibility=hidden on gcc >= 4.0. This reduces the size of the libcurl
binary and speeds up dynamic linking by hiding all the internal symbols from
the symbol table.
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
curl tool with --local-port. Plain and simply set the range of ports to bind
the local end of connections to. Implemented on to popular demand.
Not extensively tested. Please let me know how it works.
reported, the define is used by the configure script and is assumed to use
the 0xYYXXZZ format. This made "curl-config --vernum" fail in the 7.15.0
release version.
from the command line tool with --ignore-content-length. This will make it
easier to download files from Apache 1.x (and similar) servers that are
still having problems serving files larger than 2 or 4 GB. When this option
is enabled, curl will simply have to wait for the server to close the
connection to signal end of transfer. I wrote test case 269 that runs a
simple test that this works.
Andrei Cipu