@ -87,15 +87,15 @@ puts (
" sent to stdout to be in text mode for win32 systems. \n "
" \n "
" -c/--continue \n "
" Continue/Resume a previous file transfer. This \n "
" instructs curl to continue appending data on the fil e\n "
" where it was previously left, possibly because of a \n "
" broken connection to the server. There must be a named \n "
" physical file to append to for this to work. Note: \n "
" Upload resume is depening on a command named SIZE not \n "
" always present in all ftp servers! Upload resume is for \n "
" FTP only. HTTP resume is only possible with HTTP/1.1 \n "
" o r later servers.\n "
" Deprecated. Use '-C -' instead. Continue/Resume a pre \n "
" vious file transfer. This instructs curl to continue\n "
" appending data on the file where it was previously\n "
" left, possibly because of a broken connection to the\n "
" server. There must be a named physical file to append\n "
" to for this to work. Note: Upload resume is depening\n "
" on a command named SIZE not always present in all ftp\n "
" servers! Upload resume is for FTP only. HTTP resume is\n "
" o nly possible with HTTP/1.1 o r later servers.\n "
" \n "
" -C/--continue-at <offset> \n "
" Continue/Resume a previous file transfer at the given \n "
@ -214,20 +214,34 @@ puts (
" (HTTP) Include the HTTP-header in the output. The HTTP- \n "
" header includes things like server-name, date of the \n "
" document, HTTP-version and more... \n "
" --interface <name> \n "
" Perform an operation using a specified interface. You \n "
" can enter interface name, IP address or host name. An \n "
" example could look like: \n "
" \n "
" curl --interface eth0:1 http://www.netscape.com/ \n "
" \n "
" -I/--head \n "
" (HTTP/FTP) Fetch the HTTP-header only! HTTP-servers \n "
" feature the command HEAD which this uses to get nothing \n "
" but the header of a document. When used on a FTP file, \n "
" curl displays the file size only. \n "
" \n "
" --krb4 <level> \n "
" (FTP) Enable kerberos4 authentication and use. The \n "
) ;
puts (
" level must be entered and should be one of 'clear', \n "
" 'safe', 'confidential' or 'private'. Should you use a \n "
" level that is not one of these, 'private' will instead \n "
" be used. \n "
" \n "
" -K/--config <config file> \n "
" Specify which config file to read curl arguments from. \n "
" The config file is a text file in which command line \n "
" arguments can be written which then will be used as if \n "
" they were written on the actual command line. If the \n "
" first column of a config line is a '#' character, the \n "
) ;
puts (
" rest of the line will be treated as a comment. \n "
" \n "
" Specify the filename as '-' to make curl read the file \n "
@ -302,6 +316,15 @@ puts (
" we get. (Only the file part of the remote file is used, \n "
" the path is cut off.) \n "
" \n "
" -p/--proxytunnel \n "
" When an HTTP proxy is used, this option will cause non- \n "
" HTTP protocols to attempt to tunnel through the proxy \n "
" instead of merely using it to do HTTP-like operations. \n "
" The tunnel approach is made with the HTTP proxy CONNECT \n "
" request and requires that the proxy allows direct con \n "
" nect to the remote port number curl wants to tunnel \n "
" through to. \n "
" \n "
" -P/--ftpport <address> \n "
" (FTP) Reverses the initiator/listener roles when con \n "
" necting with ftp. This switch makes Curl use the PORT \n "
@ -320,6 +343,7 @@ puts (
" \n "
" - (any single-letter string) to make it pick \n "
" the machine's default \n "
" \n "
" -q If used as the first parameter on the command line, the \n "
" $HOME/.curlrc file will not be read and used as a con \n "
" fig file. \n "
@ -347,8 +371,8 @@ puts (
" \n "
" -500 specifies the last 500 bytes \n "
" \n "
" 9500 specifies the bytes from offset 9500 and for \n "
" ward\n "
" 9500 specifies the bytes from offset 9500 and\n "
" for ward\n "
" \n "
" 0-0,-1 specifies the first and last byte only(*)(H) \n "
" \n "
@ -372,146 +396,147 @@ puts (
" -s/--silent \n "
" Silent mode. Don't show progress meter or error mes \n "
" sages. Makes Curl mute. \n "
" \n "
" -S/--show-error \n "
" When used with -s it makes curl show error message if \n "
" it fails. \n "
" \n "
" -t/--upload \n "
" Transfer the stdin data to the specified file. Curl \n "
" will read everything from stdin until EOF and store \n "
" with the supplied name. If this is used on a http(s) \n "
" server, the PUT command will be used. \n "
" Deprecated. Use '-T -' instead. Transfer the stdin \n "
" data to the specified file. Curl will read everything \n "
" from stdin until EOF and store with the supplied name. \n "
" If this is used on a http(s) server, the PUT command \n "
" will be used. \n "
" \n "
" -T/--upload-file <file> \n "
" Like -t, but this transfers the specified local file.\n "
" If there is no file part in the specified URL, Curl\n "
" Like -t, but this transfers the specified local file.\n "
" If there is no file part in the specified URL, Curl\n "
" will append the local file name. NOTE that you must use \n "
" a trailing / on the last directory to really prove to\n "
" a trailing / on the last directory to really prove to\n "
" Curl that there is no file name or curl will think that \n "
" your last directory name is the remote file name to\n "
" use. That will most likely cause the upload operation\n "
" to fail. If this is used on a http(s) server, the PUT\n "
" your last directory name is the remote file name to\n "
" use. That will most likely cause the upload operation\n "
" to fail. If this is used on a http(s) server, the PUT\n "
" command will be used. \n "
" \n "
" -u/--user <user:password> \n "
" Specify user and password to use when fetching. See\n "
" README.curl for detailed examples of how to use this.\n "
" If no password is specified, curl will ask for it\n "
" Specify user and password to use when fetching. See\n "
" README.curl for detailed examples of how to use this.\n "
" If no password is specified, curl will ask for it\n "
" interactively. \n "
" \n "
" -U/--proxy-user <user:password> \n "
" Specify user and password to use for Proxy authentica \n "
" Specify user and password to use for Proxy authentica \n "
" tion. If no password is specified, curl will ask for it \n "
" interactively. \n "
" \n "
" -v/--verbose \n "
" Makes the fetching more verbose/talkative. Mostly\n "
" usable for debugging. Lines starting with '>' means\n "
" Makes the fetching more verbose/talkative. Mostly\n "
" usable for debugging. Lines starting with '>' means\n "
" data sent by curl, '<' means data received by curl that \n "
" is hidden in normal cases and lines starting with '*'\n "
" is hidden in normal cases and lines starting with '*'\n "
" means additional info provided by curl. \n "
" \n "
" -V/--version \n "
" Displays the full version of curl, libcurl and other\n "
" Displays the full version of curl, libcurl and other\n "
" 3rd party libraries linked with the executable. \n "
" \n "
" -w/--write-out <format> \n "
" Defines what to display after a completed and success \n "
" ful operation. The format is a string that may contain\n "
" plain text mixed with any number of variables. The\n "
" Defines what to display after a completed and success \n "
" ful operation. The format is a string that may contain\n "
" plain text mixed with any number of variables. The\n "
" string can be specified as \" string \" , to get read from a \n "
" particular file you specify it \" @filename \" and to tell\n "
" particular file you specify it \" @filename \" and to tell\n "
" curl to read the format from stdin you write \" @- \" . \n "
" \n "
" The variables present in the output format will be\n "
" s ubs tituted by the value or text that curl thinks fit,\n "
" as described below. All variables are specified like\n "
" %{variable_name} and to output a normal % you just\n "
" write them like %%. You can output a newline by using\n "
" The variables present in the output format will be sub \n "
" s tituted by the value or text that curl thinks fit, as \n "
" described below. All variables are specified like\n "
" %{variable_name} and to output a normal % you just\n "
" write them like %%. You can output a newline by using\n "
" \\ n, a carrige return with \\ r and a tab space with \\ t. \n "
" \n "
" NOTE: The %-letter is a special letter in the\n "
" win32-environment, where all occurrences of % must be\n "
" NOTE: The %-letter is a special letter in the\n "
" win32-environment, where all occurrences of % must be\n "
" doubled when using this option. \n "
" \n "
" Available variables are at this point: \n "
" \n "
" url_effective The URL that was fetched last. This is\n "
" url_effective The URL that was fetched last. This is\n "
" mostly meaningful if you've told curl to \n "
" follow location: headers. \n "
" \n "
" http_code The numerical code that was found in the \n "
) ;
puts (
" last retrieved HTTP(S) page. \n "
" \n "
" time_total The total time, in seconds, that the\n "
" full operation lasted. The time will be\n "
" time_total The total time, in seconds, that the\n "
" full operation lasted. The time will be\n "
" displayed with millisecond resolution. \n "
" \n "
" time_namelookup \n "
" The time, in seconds, it took from the\n "
" start until the name resolving was com \n "
" The time, in seconds, it took from the\n "
" start until the name resolving was com \n "
" pleted. \n "
" \n "
" time_connect The time, in seconds, it took from the \n "
" start until the connect to the remote \n "
" time_connect The time, in seconds, it took from the \n "
" start until the connect to the remote \n "
" host (or proxy) was completed. \n "
" \n "
" time_pretransfer \n "
" The time, in seconds, it took from the\n "
" start until the file transfer is just\n "
" about to begin. This includes all pre-\n "
" transfer commands and negotiations that\n "
" are specific to the particular proto \n "
" The time, in seconds, it took from the\n "
" start until the file transfer is just\n "
" about to begin. This includes all pre-\n "
" transfer commands and negotiations that\n "
" are specific to the particular proto \n "
" col(s) involved. \n "
) ;
puts (
" \n "
" size_download The total amount of bytes that were\n "
" size_download The total amount of bytes that were \n "
" downloaded. \n "
" \n "
" size_upload The total amount of bytes that were\n "
" size_upload The total amount of bytes that were\n "
" uploaded. \n "
" \n "
" speed_download The average download speed that curl\n "
" speed_download The average download speed that curl\n "
" measured for the complete download. \n "
" \n "
" speed_upload The average upload speed that curl mea \n "
" speed_upload The average upload speed that curl mea \n "
" sured for the complete download. \n "
" \n "
" -x/--proxy <proxyhost[:port]> \n "
" Use specified proxy. If the port number is not speci \n "
" Use specified proxy. If the port number is not speci \n "
" fied, it is assumed at port 1080. \n "
" \n "
" -X/--request <command> \n "
" (HTTP) Specifies a custom request to use when communi \n "
" cating with the HTTP server. The specified request\n "
" (HTTP) Specifies a custom request to use when communi \n "
" cating with the HTTP server. The specified request\n "
" will be used instead of the standard GET. Read the HTTP \n "
" 1.1 specification for details and explanations. \n "
" \n "
" (FTP) Specifies a custom FTP command to use instead of\n "
" (FTP) Specifies a custom FTP command to use instead of\n "
" LIST when doing file lists with ftp. \n "
" \n "
" -y/--speed-time <time> \n "
" If a download is slower than speed-limit bytes per sec \n "
" ond during a speed-time period, the download gets\n "
" ond during a speed-time period, the download gets\n "
" aborted. If speed-time is used, the default speed-limit \n "
" will be 1 unless set with -y. \n "
" \n "
" -Y/--speed-limit <speed> \n "
" If a download is slower than this given speed, in bytes \n "
" per second, for speed-time seconds it gets aborted.\n "
" per second, for speed-time seconds it gets aborted.\n "
" speed-time is set with -Y and is 30 if not set. \n "
" \n "
" -z/--time-cond <date expression> \n "
" (HTTP) Request to get a file that has been modified\n "
" later than the given time and date, or one that has\n "
" (HTTP) Request to get a file that has been modified\n "
" later than the given time and date, or one that has\n "
" been modified before that time. The date expression can \n "
" be all sorts of date strings or if it doesn't match any \n "
" internal ones, it tries to get the time from a given\n "
" file name instead! See the GNU date(1) or curl_get \n "
" internal ones, it tries to get the time from a given\n "
" file name instead! See the GNU date(1) or curl_get \n "
" date(3) man pages for date expression details. \n "
" \n "
" Start the date expression with a dash (-) to make it\n "
" request for a document that is older than the given\n "
" Start the date expression with a dash (-) to make it\n "
" request for a document that is older than the given\n "
" date/time, default is a document that is newer than the \n "
" specified date/time. \n "
" \n "
@ -524,15 +549,15 @@ puts (
" ing with a remote SSL server. \n "
" \n "
" -#/--progress-bar \n "
" Make curl display progress information as a progress\n "
" Make curl display progress information as a progress\n "
" bar instead of the default statistics. \n "
" \n "
" --crlf \n "
" (FTP) Convert LF to CRLF in upload. Useful for MVS\n "
" (FTP) Convert LF to CRLF in upload. Useful for MVS\n "
" (OS/390). \n "
" \n "
" --stderr <file> \n "
" Redirect all writes to stderr to the specified file\n "
" Redirect all writes to stderr to the specified file\n "
" instead. If the file name is a plain '-', it is instead \n "
" written to stdout. This option has no point when you're \n "
" using a shell with decent redirecting capabilities. \n "
@ -555,7 +580,7 @@ puts (
" Sets proxy server to use for GOPHER. \n "
" \n "
" ALL_PROXY [protocol://]<host>[:port] \n "
" Sets proxy server to use if no protocol-specific proxy\n "
" Sets proxy server to use if no protocol-specific proxy\n "
" is set. \n "
" \n "
" NO_PROXY <comma-separated list of hosts> \n "
@ -563,12 +588,12 @@ puts (
" If set to a asterisk '*' only, it matches all hosts. \n "
" \n "
" COLUMNS <integer> \n "
" The width of the terminal. This variable only affects\n "
" The width of the terminal. This variable only affects\n "
" curl when the --progress-bar option is used. \n "
" \n "
" EXIT CODES \n "
" There exists a bunch of different error codes and their cor \n "
" responding error messages that may appear during bad condi \n "
" responding error messages that may appear during bad condi \n "
" tions. At the time of this writing, the exit codes are: \n "
" \n "
" 1 Unsupported protocol. This build of curl has no support \n "
@ -578,40 +603,40 @@ puts (
" \n "
" 3 URL malformat. The syntax was not correct. \n "
" \n "
" 4 URL user malformatted. The user-part of the URL syntax\n "
" 4 URL user malformatted. The user-part of the URL syntax\n "
" was not correct. \n "
" 5 Couldn't resolve proxy. The given proxy host could not \n "
" \n "
" 5 Couldn't resolve proxy. The given proxy host could not \n "
" be resolved. \n "
" \n "
" 6 Couldn't resolve host. The given remote host was not\n "
" 6 Couldn't resolve host. The given remote host was not\n "
" resolved. \n "
" \n "
" 7 Failed to connect to host. \n "
" \n "
" 8 FTP weird server reply. The server sent data curl\n "
" 8 FTP weird server reply. The server sent data curl\n "
" couldn't parse. \n "
" \n "
" 9 FTP access denied. The server denied login. \n "
" \n "
" 10 FTP user/password incorrect. Either one or both were\n "
" 10 FTP user/password incorrect. Either one or both were\n "
" not accepted by the server. \n "
" \n "
" 11 FTP weird PASS reply. Curl couldn't parse the reply\n "
" 11 FTP weird PASS reply. Curl couldn't parse the reply\n "
" sent to the PASS request. \n "
" \n "
" 12 FTP weird USER reply. Curl couldn't parse the reply\n "
" 12 FTP weird USER reply. Curl couldn't parse the reply\n "
" sent to the USER request. \n "
" \n "
" 13 FTP weird PASV reply, Curl couldn't parse the reply\n "
" 13 FTP weird PASV reply, Curl couldn't parse the reply\n "
" sent to the PASV request. \n "
" \n "
" 14 FTP weird 227 formay. Curl couldn't parse the 227-line\n "
" 14 FTP weird 227 formay. Curl couldn't parse the 227-line\n "
" the server sent. \n "
" \n "
" 15 FTP can't get host. Couldn't resolve the host IP we got \n "
" in the 227-line. \n "
" \n "
" 16 FTP can't reconnect. Couldn't connect to the host we\n "
" 16 FTP can't reconnect. Couldn't connect to the host we\n "
" got in the 227-line. \n "
" \n "
" 17 FTP couldn't set binary. Couldn't change transfer \n "
@ -621,51 +646,51 @@ puts (
" \n "
" 19 FTP couldn't RETR file. The RETR command failed. \n "
" \n "
" 20 FTP write error. The transfer was reported bad by the\n "
" 20 FTP write error. The transfer was reported bad by the\n "
" server. \n "
" \n "
" 21 FTP quote error. A quote command returned error from\n "
" 21 FTP quote error. A quote command returned error from\n "
" the server. \n "
" \n "
" 22 HTTP not found. The requested page was not found. This\n "
" 22 HTTP not found. The requested page was not found. This\n "
" return code only appears if --fail is used. \n "
" \n "
" 23 Write error. Curl couldn't write data to a local\n "
" 23 Write error. Curl couldn't write data to a local\n "
" filesystem or similar. \n "
" \n "
" 24 Malformat user. User name badly specified. \n "
" \n "
" 25 FTP couldn't STOR file. The server denied the STOR\n "
" 25 FTP couldn't STOR file. The server denied the STOR\n "
" operation. \n "
" \n "
" 26 Read error. Various reading problems. \n "
" \n "
" 27 Out of memory. A memory allocation request failed. \n "
" \n "
" 28 Operation timeout. The specified time-out period was\n "
" 28 Operation timeout. The specified time-out period was\n "
" reached according to the conditions. \n "
" \n "
" 29 FTP couldn't set ASCII. The server returned an unknown\n "
" 29 FTP couldn't set ASCII. The server returned an unknown\n "
" reply. \n "
" \n "
" 30 FTP PORT failed. The PORT command failed. \n "
" \n "
" 31 FTP couldn't use REST. The REST command failed. \n "
" \n "
" 32 FTP couldn't use SIZE. The SIZE command failed. The\n "
" command is an extension to the original FTP spec RFC\n "
" 32 FTP couldn't use SIZE. The SIZE command failed. The\n "
" command is an extension to the original FTP spec RFC\n "
" 959. \n "
" \n "
" 33 HTTP range error. The range \" command \" didn't work. \n "
" \n "
" 34 HTTP post error. Internal post-request generation\n "
" 34 HTTP post error. Internal post-request generation\n "
" error. \n "
" \n "
" 35 SSL connect error. The SSL handshaking failed. \n "
" \n "
" 36 FTP bad download resume. Couldn't continue an earlier\n "
" 36 FTP bad download resume. Couldn't continue an earlier\n "
" aborted download. \n "
" \n "
" 37 FILE couldn't read file. Failed to open the file. Per \n "
" 37 FILE couldn't read file. Failed to open the file. Per \n "
" missions? \n "
" \n "
" 38 LDAP cannot bind. LDAP bind operation failed. \n "
@ -674,15 +699,16 @@ puts (
" \n "
" 40 Library not found. The LDAP library was not found. \n "
" \n "
" 41 Function not found. A required LDAP function was not\n "
" 41 Function not found. A required LDAP function was not\n "
" found. \n "
" \n "
" XX There will appear more error codes here in future\n "
" releases. The existing ones are meant to never change.\n "
" XX There will appear more error codes here in future\n "
" releases. The existing ones are meant to never change.\n "
" \n "
" BUGS \n "
" If you do find any (or have other suggestions), mail Daniel\n "
" If you do find any (or have other suggestions), mail Daniel\n "
" Stenberg <Daniel.Stenberg@haxx.se>. \n "
" \n "
" AUTHORS / CONTRIBUTORS \n "
" - Daniel Stenberg <Daniel.Stenberg@haxx.se> \n "
" - Rafael Sagula <sagula@inf.ufrgs.br> \n "
@ -722,6 +748,8 @@ puts (
" - Paul Marquis <pmarquis@iname.com> \n "
" - Ellis Pritchard <ellis@citria.com> \n "
" - Damien Adant <dams@usa.net> \n "
) ;
puts (
" - Chris <cbayliss@csc.come> \n "
" - Marco G. Salvagno <mgs@whiz.cjb.net> \n "
" - Paul Marquis <pmarquis@iname.com> \n "
@ -733,6 +761,10 @@ puts (
" - Fred Noz <FNoz@siac.com> \n "
" - Caolan McNamara <caolan@csn.ul.ie> \n "
" - Albert Chin-A-Young <china@thewrittenword.com> \n "
" - Stephen Kick <skick@epicrealm.com> \n "
" - Martin Hedenfalk <mhe@stacken.kth.se> \n "
" - Richard Prescott \n "
" \n "
" WWW \n "
" http://curl.haxx.se \n "
" \n "
@ -762,8 +794,6 @@ puts (
" Get a gopher document from funet's gopher server: \n "
" \n "
" curl gopher://gopher.funet.fi \n "
) ;
puts (
" \n "
" Get a web page from a server using port 8000: \n "
" \n "
@ -885,9 +915,11 @@ puts (
" \n "
" curl -T localfile -a ftp://ftp.upload.com/remotefile \n "
" \n "
" NOTE: Curl does not support ftp upload through a proxy! The reason for this \n "
" is simply that proxies are seldomly configured to allow this and that no \n "
" author has supplied code that makes it possible! \n "
" Curl also supports ftp upload through a proxy, but only if the proxy is \n "
" configured to allow that kind of tunneling. If it does, you can run curl in \n "
" a fashion similar to: \n "
" \n "
" curl --proxytunnel -x proxy:port -T localfile ftp.upload.com \n "
" \n "
" HTTP \n "
" \n "
@ -1031,6 +1063,8 @@ puts (
" A HTTP request has the option to include information about the browser \n "
" that generated the request. Curl allows it to be specified on the command \n "
" line. It is especially useful to fool or trick stupid servers or CGI \n "
) ;
puts (
" scripts that only accept certain browsers. \n "
" \n "
" Example: \n "
@ -1058,8 +1092,6 @@ puts (
" headers that looks like 'Set-Cookie: <data>' where the data part then \n "
" typically contains a set of NAME=VALUE pairs (separated by semicolons ';' \n "
" like \" NAME1=VALUE1; NAME2=VALUE2; \" ). The server can also specify for what \n "
) ;
puts (
" path the \" cookie \" should be used for (by specifying \" path=value \" ), when the \n "
" cookie should expire ( \" expire=DATE \" ), for what domain to use it \n "
" ( \" domain=NAME \" ) and if it should be used on secure connections only \n "
@ -1228,13 +1260,14 @@ puts (
" connect to the client on the given (as parameters to the PORT command) IP \n "
" number and port. \n "
" \n "
" The -P flag to curl allows for different options. Your machine may have\n "
" The -P flag to curl supports a few different options. Your machine may have\n "
" several IP-addresses and/or network interfaces and curl allows you to select \n "
" which of them to use. Default address can also be used: \n "
" \n "
" curl -P - ftp.download.com \n "
" \n "
" Download with PORT but use the IP address of our 'le0' interface: \n "
" Download with PORT but use the IP address of our 'le0' interface (this does \n "
" not work on windows): \n "
" \n "
" curl -P le0 ftp.download.com \n "
" \n "
@ -1242,6 +1275,16 @@ puts (
" \n "
" curl -P 192.168.0.10 ftp.download.com \n "
" \n "
" NETWORK INTERFACE \n "
" \n "
" Get a web page from a server using a specified port for the interface: \n "
" \n "
" curl --interface eth0:1 http://www.netscape.com/ \n "
" \n "
" or \n "
" \n "
" curl --interface 192.168.1.10 http://www.netscape.com/ \n "
" \n "
" HTTPS \n "
" \n "
" Secure HTTP requires SSL libraries to be installed and used when curl is \n "
@ -1281,6 +1324,8 @@ puts (
" curl -2 https://secure.site.com/ \n "
" \n "
" Otherwise, curl will first attempt to use v3 and then v2. \n "
) ;
puts (
" \n "
" To use OpenSSL to convert your favourite browser's certificate into a PEM \n "
" formatted one that curl can use, do something like this (assuming netscape, \n "
@ -1328,8 +1373,6 @@ puts (
" TIME CONDITIONS \n "
" \n "
" HTTP allows a client to specify a time condition for the document it \n "
) ;
puts (
" requests. It is If-Modified-Since or If-Unmodified-Since. Curl allow you to \n "
" specify them with the -z/--time-cond flag. \n "
" \n "
@ -1439,13 +1482,26 @@ puts (
" \n "
" curl -w 'We downloaded %{size_download} bytes \\ n' www.download.com \n "
" \n "
" KERBEROS4 FTP TRANSFER \n "
" \n "
" Curl supports kerberos4 for FTP transfers. You need the kerberos package \n "
" installed and used at curl build time for it to be used. \n "
" \n "
" First, get the krb-ticket the normal way, like with the kauth tool. Then use \n "
" curl in way similar to: \n "
" \n "
" curl --krb4 private ftp://krb4site.com -u username:fakepwd \n "
" \n "
" There's no use for a password on the -u switch, but a blank one will make \n "
" curl ask for one and you already entered the real password to kauth. \n "
" \n "
" MAILING LIST \n "
" \n "
" We have an open mailing list to discuss curl, its development and things \n "
" relevant to this. \n "
" \n "
" To subscribe, mail curl-request@contactor.se with \" subscribe <your email \n "
" address> \" in the body. \n "
" To subscribe, mail curl-request@contactor.se with \" subscribe < fill in your\n "
" email address>\" in the body. \n "
" \n "
" To post to the list, mail curl@contactor.se. \n "
" \n "
Daniel Stenberg