moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-18 07:25:14 -05:00
Code Issues Releases Wiki Activity
f3ce38739f
curl/tests/data/test2033

125 lines
2.5 KiB
Plaintext
Raw Normal View History

Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
<testcase>
<info>
<keywords>
HTTP
HTTP GET
HTTP Basic auth
HTTP NTLM auth
pipelining
test2033: this went flaky again Suspicion: when we enabled the threaded resolver by default.
2017-08-11 17:53:47 -04:00
flaky
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
</keywords>
</info>
# Server-side
<reply>
<!-- Basic auth -->
<data100>
testsuite: changed HTTP and RTSP header line-endings to CRLF According to RFC 2616 and RFC 2326 individual protocol elements, like headers and except the actual content, are terminated by using CRLF. Therefore the test data files for these protocols need to contain mixed line-endings if the actual protocol elements use CRLF while the file uses LF.
2014-01-31 18:52:08 -05:00
HTTP/1.1 401 Need Basic or NTLM auth
Server: Microsoft-IIS/5.0
Content-Type: text/html; charset=iso-8859-1
Content-Length: 29
WWW-Authenticate: NTLM
WWW-Authenticate: Basic realm="testrealm"
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
This is a bad password page!
</data100>
tests: fixed a typo in some comments
2017-03-04 06:50:30 -05:00
<!-- NTLM auth -->
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
<data200>
testsuite: changed HTTP and RTSP header line-endings to CRLF According to RFC 2616 and RFC 2326 individual protocol elements, like headers and except the actual content, are terminated by using CRLF. Therefore the test data files for these protocols need to contain mixed line-endings if the actual protocol elements use CRLF while the file uses LF.
2014-01-31 18:52:08 -05:00
HTTP/1.1 401 Need Basic or NTLM auth (2)
Server: Microsoft-IIS/5.0
Content-Type: text/html; charset=iso-8859-1
Content-Length: 27
WWW-Authenticate: NTLM
WWW-Authenticate: Basic realm="testrealm"
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
This is not the real page!
</data200>
<data1201>
testsuite: changed HTTP and RTSP header line-endings to CRLF According to RFC 2616 and RFC 2326 individual protocol elements, like headers and except the actual content, are terminated by using CRLF. Therefore the test data files for these protocols need to contain mixed line-endings if the actual protocol elements use CRLF while the file uses LF.
2014-01-31 18:52:08 -05:00
HTTP/1.1 401 NTLM intermediate (2)
Server: Microsoft-IIS/5.0
Content-Type: text/html; charset=iso-8859-1
Content-Length: 33
WWW-Authenticate: NTLM TlRMTVNTUAACAAAACAAIADAAAAAGggEAq6U1NAWaJCIAAAAAAAAAAAAAAAA4AAAATlRMTUF1dGg=
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
This is still not the real page!
</data1201>
<data1202>
testsuite: changed HTTP and RTSP header line-endings to CRLF According to RFC 2616 and RFC 2326 individual protocol elements, like headers and except the actual content, are terminated by using CRLF. Therefore the test data files for these protocols need to contain mixed line-endings if the actual protocol elements use CRLF while the file uses LF.
2014-01-31 18:52:08 -05:00
HTTP/1.1 200 Things are fine in server land
Server: Microsoft-IIS/5.0
Content-Type: text/html; charset=iso-8859-1
Content-Length: 32
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
Finally, this is the real page!
</data1202>
<datacheck>
tests: stabilize test 2032 and 2033 Both these tests run the same underlying test code: libntlmconnect.c - this test code made some assumptions about socket ordering when it used curl_easy_fdset() and when we changed timing or got accidental changes in libcurl the tests would fail. The tests verify that the different transfers keep using the same connections, which I now instead made sure by adding the number of bytes each transfer gets and then verifies that they always get the same amount as when these tests worked. Closes #1576
2017-06-15 17:47:42 -04:00
Data connection 0: 228
Data connection 1: 228
Data connection 2: 402
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
</datacheck>
</reply>
# Client-side
<client>
test2033: requires NTLM support
2013-06-12 04:34:10 -04:00
<features>
NTLM
tests: Disabled NTLM tests when running with SSPI enabled
2013-12-28 15:22:22 -05:00
!SSPI
test2033: requires NTLM support
2013-06-12 04:34:10 -04:00
</features>
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
<server>
http
</server>
<tool>
lib2033
</tool>
<name>
NTLM connection mapping, pipelining enabled
</name>
<setenv>
# we force our own host name, in order to make the test machine independent
CURL_GETHOSTNAME=curlhost
# we try to use the LD_PRELOAD hack, if not a debug build
LD_PRELOAD=%PWD/libtest/.libs/libhostname.so
</setenv>
<command>
http://%HOSTIP:%HTTPPORT/2032
</command>
<precheck>
chkhostname curlhost
</precheck>
</client>
# Verify data after the test has been "shot"
<verify>
<strip>
^User-Agent:.*
</strip>
<protocol>
GET /20320100 HTTP/1.1
tests 2032, 2033: Don't hardcode port in expected output
2013-08-15 04:55:44 -04:00
Host: 127.0.0.1:%HTTPPORT
test203[0-3]: Expect the Host header to be the first header Required for the tests to work after a5d994941c2b.
2015-03-12 11:06:11 -04:00
Authorization: Basic dGVzdHVzZXI6dGVzdHBhc3M=
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
Accept: */*
GET /20320100 HTTP/1.1
tests 2032, 2033: Don't hardcode port in expected output
2013-08-15 04:55:44 -04:00
Host: 127.0.0.1:%HTTPPORT
test203[0-3]: Expect the Host header to be the first header Required for the tests to work after a5d994941c2b.
2015-03-12 11:06:11 -04:00
Authorization: Basic dGVzdHVzZXI6dGVzdHBhc3M=
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
Accept: */*
GET /20320200 HTTP/1.1
tests 2032, 2033: Don't hardcode port in expected output
2013-08-15 04:55:44 -04:00
Host: 127.0.0.1:%HTTPPORT
test203[0-3]: Expect the Host header to be the first header Required for the tests to work after a5d994941c2b.
2015-03-12 11:06:11 -04:00
Authorization: NTLM TlRMTVNTUAABAAAABoIIAAAAAAAAAAAAAAAAAAAAAAA=
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
Accept: */*
GET /20320200 HTTP/1.1
tests 2032, 2033: Don't hardcode port in expected output
2013-08-15 04:55:44 -04:00
Host: 127.0.0.1:%HTTPPORT
test203[0-3]: Expect the Host header to be the first header Required for the tests to work after a5d994941c2b.
2015-03-12 11:06:11 -04:00
Authorization: NTLM TlRMTVNTUAADAAAAGAAYAEAAAAAYABgAWAAAAAAAAABwAAAACAAIAHAAAAAIAAgAeAAAAAAAAAAAAAAABoIBAI+/Fp9IERAQ74OsdNPbBpg7o8CVwLSO4DtFyIcZHUMKVktWIu92s2892OVpd2JzqnRlc3R1c2VyY3VybGhvc3Q=
Multiple pipelines and limiting the number of connections. Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-15 05:50:45 -05:00
Accept: */*
</protocol>
</verify>
</testcase>
Reference in New Issue Copy Permalink