#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at http://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# $Id$
###########################################################################
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.57)
dnl We don't know the version number "staticly" so we use a dash here
AC_INIT(curl, [-], [a suitable curl mailing list => http://curl.haxx.se/mail/])
dnl configure script copyright
AC_COPYRIGHT([Copyright (c) 1998 - 2005 Daniel Stenberg, <daniel@haxx.se>
This configure script may be copied, distributed and modified under the
terms of the curl license; see COPYING for more details])
AC_CONFIG_SRCDIR([lib/urldata.h])
AM_CONFIG_HEADER(lib/config.h src/config.h)
AM_MAINTAINER_MODE
dnl SED is needed by some of the tools
AC_PATH_PROG( SED, sed, sed-was-not-found-by-configure,
$PATH:/usr/bin:/usr/local/bin)
AC_SUBST(SED)
if test "x$SED" = "xsed-was-not-found-by-configure"; then
AC_MSG_WARN([sed was not found, this may ruin your chances to build fine])
fi
dnl AR is used by libtool, and try the odd Solaris path too
dnl we use AC_CHECK_TOOL since this should make a library for the target
dnl platform
AC_CHECK_TOOL(AR, ar,
ar-was-not-found-by-configure,
$PATH:/usr/bin:/usr/local/bin:/usr/ccs/bin)
AC_SUBST(AR)
if test "x$AR" = "xar-was-not-found-by-configure"; then
AC_MSG_WARN([ar was not found, this may ruin your chances to build fine])
fi
dnl figure out the libcurl version
VERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
AM_INIT_AUTOMAKE(curl,$VERSION)
AC_MSG_CHECKING([curl version])
AC_MSG_RESULT($VERSION)
dnl
dnl we extract the numerical version for curl-config only
VERSIONNUM=`$SED -ne 's/^#define LIBCURL_VERSION_NUM 0x\(.*\)/\1/p' ${srcdir}/include/curl/curlver.h`
AC_SUBST(VERSIONNUM)
dnl Solaris pkgadd support definitions
PKGADD_PKG="HAXXcurl"
PKGADD_NAME="cURL - a client that groks URLs"
PKGADD_VENDOR="curl.haxx.se"
AC_SUBST(PKGADD_PKG)
AC_SUBST(PKGADD_NAME)
AC_SUBST(PKGADD_VENDOR)
dnl
dnl initialize all the info variables
curl_ssl_msg="no (--with-ssl / --with-gnutls)"
curl_zlib_msg="no (--with-zlib)"
curl_krb4_msg="no (--with-krb4*)"
curl_gss_msg="no (--with-gssapi)"
curl_spnego_msg="no (--with-spnego)"
curl_ares_msg="no (--enable-ares)"
curl_ipv6_msg="no (--enable-ipv6)"
curl_idn_msg="no (--with-libidn)"
curl_manual_msg="no (--enable-manual)"
curl_verbose_msg="enabled (--disable-verbose)"
curl_sspi_msg="no (--enable-sspi)"
dnl
dnl Detect the canonical host and target build environment
dnl
AC_CANONICAL_HOST
dnl Get system canonical name
AC_DEFINE_UNQUOTED(OS, "${host}", [cpu-machine-OS])
dnl Check for AIX weirdos
AC_AIX
dnl Checks for programs.
AC_PROG_CC
dnl check for how to do large files
AC_SYS_LARGEFILE
dnl check for cygwin stuff
AC_LIBTOOL_WIN32_DLL
dnl libtool setup
AC_PROG_LIBTOOL
AC_MSG_CHECKING([if we need -no-undefined])
case $host in
*-*-cygwin | *-*-mingw* | *-*-pw32*)
need_no_undefined=yes
;;
*)
need_no_undefined=no
;;
esac
AC_MSG_RESULT($need_no_undefined)
AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
AC_MSG_CHECKING([if we need -mimpure-text])
mimpure=no
case $host in
*-*-solaris2*)
if test "$GCC" = "yes"; then
mimpure="yes"
fi
;;
*)
;;
esac
AC_MSG_RESULT($mimpure)
AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
case $host in
*-*-mingw*)
AC_DEFINE(BUILDING_LIBCURL, 1, [when building libcurl itself])
AC_MSG_RESULT(yes)
AC_MSG_CHECKING([if we need CURL_STATICLIB])
if test "X$enable_shared" = "Xno"
then
AC_DEFINE(CURL_STATICLIB, 1, [when not building a shared library])
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
;;
*)
AC_MSG_RESULT(no)
;;
esac
dnl The install stuff has already been taken care of by the automake stuff
dnl AC_PROG_INSTALL
AC_PROG_MAKE_SET
dnl **********************************************************************
dnl Make sure that our checks for headers windows.h winsock.h winsock2.h
dnl and ws2tcpip.h take precedence over any other further checks which
dnl could be done later using AC_CHECK_HEADER or AC_CHECK_HEADERS for
dnl this specific header files. And do them before its results are used.
dnl **********************************************************************
CURL_CHECK_HEADER_WINDOWS
CURL_CHECK_HEADER_WINSOCK
CURL_CHECK_HEADER_WINSOCK2
CURL_CHECK_HEADER_WS2TCPIP
dnl ************************************************************
dnl switch off particular protocols
dnl
AC_MSG_CHECKING([whether to support http])
AC_ARG_ENABLE(http,
AC_HELP_STRING([--enable-http],[Enable HTTP support])
AC_HELP_STRING([--disable-http],[Disable HTTP support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_HTTP, 1, [to disable HTTP])
AC_MSG_WARN([disable HTTP disables FTP over proxy])
AC_SUBST(CURL_DISABLE_HTTP, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support ftp])
AC_ARG_ENABLE(ftp,
AC_HELP_STRING([--enable-ftp],[Enable FTP support])
AC_HELP_STRING([--disable-ftp],[Disable FTP support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_FTP, 1, [to disable FTP])
AC_SUBST(CURL_DISABLE_FTP, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support file])
AC_ARG_ENABLE(file,
AC_HELP_STRING([--enable-file],[Enable FILE support])
AC_HELP_STRING([--disable-file],[Disable FILE support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_FILE, 1, [to disable FILE])
AC_SUBST(CURL_DISABLE_FILE, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support ldap])
AC_ARG_ENABLE(ldap,
AC_HELP_STRING([--enable-ldap],[Enable LDAP support])
AC_HELP_STRING([--disable-ldap],[Disable LDAP support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
AC_SUBST(CURL_DISABLE_LDAP, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support dict])
AC_ARG_ENABLE(dict,
AC_HELP_STRING([--enable-dict],[Enable DICT support])
AC_HELP_STRING([--disable-dict],[Disable DICT support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_DICT, 1, [to disable DICT])
AC_SUBST(CURL_DISABLE_DICT, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support telnet])
AC_ARG_ENABLE(telnet,
AC_HELP_STRING([--enable-telnet],[Enable TELNET support])
AC_HELP_STRING([--disable-telnet],[Disable TELNET support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_TELNET, 1, [to disable TELNET])
AC_SUBST(CURL_DISABLE_TELNET, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
AC_MSG_CHECKING([whether to support tftp])
AC_ARG_ENABLE(tftp,
AC_HELP_STRING([--enable-tftp],[Enable TFTP support])
AC_HELP_STRING([--disable-tftp],[Disable TFTP support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_TFTP, 1, [to disable TFTP])
AC_SUBST(CURL_DISABLE_TFTP, [1])
;;
*) AC_MSG_RESULT(yes)
;;
esac ],
AC_MSG_RESULT(yes)
)
dnl **********************************************************************
dnl Check for built-in manual
dnl **********************************************************************
AC_MSG_CHECKING([whether to provide built-in manual])
AC_ARG_ENABLE(manual,
AC_HELP_STRING([--enable-manual],[Enable built-in manual])
AC_HELP_STRING([--disable-manual],[Disable built-in manual]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
;;
*) AC_MSG_RESULT(yes)
USE_MANUAL="1"
;;
esac ],
AC_MSG_RESULT(yes)
USE_MANUAL="1"
)
dnl The actual use of the USE_MANUAL variable is done much later in this
dnl script to allow other actions to disable it as well.
dnl **********************************************************************
dnl Checks for libraries.
dnl **********************************************************************
dnl gethostbyname without lib or in the nsl lib?
AC_CHECK_FUNC(gethostbyname,
[HAVE_GETHOSTBYNAME="1"
],
[ AC_CHECK_LIB(nsl, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
LIBS="$LIBS -lnsl"
])
])
if test "$HAVE_GETHOSTBYNAME" != "1"
then
dnl gethostbyname in the socket lib?
AC_CHECK_LIB(socket, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
LIBS="$LIBS -lsocket"
])
fi
dnl At least one system has been identified to require BOTH nsl and socket
dnl libs at the same time to link properly.
if test "$HAVE_GETHOSTBYNAME" != "1"
then
AC_MSG_CHECKING([for gethostbyname with both nsl and socket libs])
my_ac_save_LIBS=$LIBS
LIBS="-lnsl -lsocket $LIBS"
AC_TRY_LINK( ,
[gethostbyname();],
[ dnl found it!
HAVE_GETHOSTBYNAME="1"
AC_MSG_RESULT([yes])],
[ dnl failed!
AC_MSG_RESULT([no])
dnl restore LIBS
LIBS=$my_ac_save_LIBS]
)
fi
if test "$HAVE_GETHOSTBYNAME" != "1"
then
dnl This is for Msys/Mingw
AC_MSG_CHECKING([for gethostbyname in ws2_32])
my_ac_save_LIBS=$LIBS
LIBS="-lws2_32 $LIBS"
AC_TRY_LINK([#include <winsock2.h>],
[gethostbyname("www.dummysite.com");],
[ dnl worked!
ws2="yes"
AC_MSG_RESULT([yes])
HAVE_GETHOSTBYNAME="1"],
[ dnl failed, restore LIBS
LIBS=$my_ac_save_LIBS
AC_MSG_RESULT(no)]
)
fi
if test "$HAVE_GETHOSTBYNAME" != "1"
then
dnl gethostbyname in the net lib - for BeOS
AC_CHECK_LIB(net, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
LIBS="$LIBS -lnet"
])
fi
if test "$HAVE_GETHOSTBYNAME" = "1"; then
AC_DEFINE(HAVE_GETHOSTBYNAME, 1, [If you have gethostbyname])
else
AC_MSG_ERROR([couldn't find libraries for gethostbyname()])
fi
dnl resolve lib?
AC_CHECK_FUNC(strcasecmp, , [ AC_CHECK_LIB(resolve, strcasecmp) ])
if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
AC_CHECK_LIB(resolve, strcasecmp,
[LIBS="-lresolve $LIBS"],
,
-lnsl)
fi
dnl socket lib?
AC_CHECK_FUNC(connect, , [ AC_CHECK_LIB(socket, connect) ])
dnl dl lib?
AC_CHECK_FUNC(dlclose, , [ AC_CHECK_LIB(dl, dlopen) ])
AC_MSG_CHECKING([whether to use libgcc])
AC_ARG_ENABLE(libgcc,
AC_HELP_STRING([--enable-libgcc],[use libgcc when linking]),
[ case "$enableval" in
yes)
LIBS="$LIBS -lgcc"
AC_MSG_RESULT(yes)
;;
*) AC_MSG_RESULT(no)
;;
esac ],
AC_MSG_RESULT(no)
)
dnl **********************************************************************
dnl Check for the name of dynamic OpenLDAP libraries
dnl **********************************************************************
LDAPLIBNAME=""
AC_ARG_WITH(ldap-lib,
AC_HELP_STRING([--with-ldap-lib=libname],[Specify name of dynamic ldap lib file]),
[LDAPLIBNAME="$withval"])
LBERLIBNAME=""
AC_ARG_WITH(lber-lib,
AC_HELP_STRING([--with-lber-lib=libname],[Specify name of dynamic lber lib file]),
[LBERLIBNAME="$withval"])
if test x$CURL_DISABLE_LDAP != x1 ; then
if test -z "$LDAPLIBNAME" ; then
case $host in
*-*-cygwin | *-*-mingw* | *-*-pw32*)
dnl Windows uses a single and unique OpenLDAP DLL name
LDAPLIBNAME="wldap32.dll"
LBERLIBNAME="no"
;;
esac
fi
if test "$LDAPLIBNAME" ; then
AC_DEFINE_UNQUOTED(DL_LDAP_FILE, "$LDAPLIBNAME")
AC_MSG_CHECKING([name of dynamic library ldap])
AC_MSG_RESULT($LDAPLIBNAME)
else
dnl Try to find the right ldap library name for this system
CURL_DLLIB_NAME(DL_LDAP_FILE, ldap)
fi
if test "$LBERLIBNAME" ; then
dnl If name is "no" then don't define this variable at all
dnl (it's only needed if libldap.so's dependencies are broken).
if test "$LBERLIBNAME" != "no" ; then
AC_DEFINE_UNQUOTED(DL_LBER_FILE, "$LBERLIBNAME")
fi
AC_MSG_CHECKING([name of dynamic library lber])
AC_MSG_RESULT($LBERLIBNAME)
else
dnl Try to find the right lber library name for this system
CURL_DLLIB_NAME(DL_LBER_FILE, lber)
fi
fi
dnl **********************************************************************
dnl Check for the presence of the winmm library.
dnl **********************************************************************
AC_MSG_CHECKING([for timeGetTime in winmm])
my_ac_save_LIBS=$LIBS
LIBS="-lwinmm $LIBS"
AC_TRY_LINK([#include <windef.h>
#include <mmsystem.h>
],
[timeGetTime();],
[ dnl worked!
AC_MSG_RESULT([yes])
],
[ dnl failed, restore LIBS
LIBS=$my_ac_save_LIBS
AC_MSG_RESULT(no)]
)
dnl **********************************************************************
dnl Checks for IPv6
dnl **********************************************************************
AC_MSG_CHECKING([whether to enable ipv6])
AC_ARG_ENABLE(ipv6,
AC_HELP_STRING([--enable-ipv6],[Enable ipv6 (with ipv4) support])
AC_HELP_STRING([--disable-ipv6],[Disable ipv6 support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
ipv6=no
;;
*) AC_MSG_RESULT(yes)
ipv6=yes
;;
esac ],
AC_TRY_RUN([ /* is AF_INET6 available? */
#include <sys/types.h>
#include <sys/socket.h>
main()
{
if (socket(AF_INET6, SOCK_STREAM, 0) < 0)
exit(1);
else
exit(0);
}
],
AC_MSG_RESULT(yes)
ipv6=yes,
AC_MSG_RESULT(no)
ipv6=no,
AC_MSG_RESULT(no)
ipv6=no
))
if test "$ipv6" = "yes"; then
curl_ipv6_msg="enabled"
CURL_CHECK_WORKING_GETADDRINFO
CURL_CHECK_NI_WITHSCOPEID
fi
dnl **********************************************************************
dnl Check how non-blocking sockets are set
dnl **********************************************************************
AC_ARG_ENABLE(nonblocking,
AC_HELP_STRING([--enable-nonblocking],[Enable detecting how to do it])
AC_HELP_STRING([--disable-nonblocking],[Disable non-blocking socket detection]),
[
if test "$enableval" = "no" ; then
AC_MSG_WARN([non-blocking sockets disabled])
AC_DEFINE(HAVE_DISABLED_NONBLOCKING, 1,
[to disable NON-BLOCKING connections])
else
CURL_CHECK_NONBLOCKING_SOCKET
fi
],
[
CURL_CHECK_NONBLOCKING_SOCKET
])
dnl **********************************************************************
dnl Check if the operating system allows programs to write to their own argv[]
dnl **********************************************************************
AC_MSG_CHECKING([if argv can be written to])
AC_CACHE_VAL(curl_cv_writable_argv, [
AC_RUN_IFELSE([[
int main(int argc, char ** argv) {
argv[0][0] = ' ';
return (argv[0][0] == ' ')?0:1;
}
]],
curl_cv_writable_argv=yes,
curl_cv_writable_argv=no,
curl_cv_writable_argv=cross)
])
case $curl_cv_writable_argv in
yes)
AC_DEFINE(HAVE_WRITABLE_ARGV, 1, [Define this symbol if your OS supports changing the contents of argv])
AC_MSG_RESULT(yes)
;;
no)
AC_MSG_RESULT(no)
;;
*)
AC_MSG_RESULT(no)
AC_MSG_WARN([the previous check could not be made default was used])
;;
esac
dnl **********************************************************************
dnl Check for the presence of Kerberos4 libraries and headers
dnl **********************************************************************
AC_ARG_WITH(krb4-includes,
AC_HELP_STRING([--with-krb4-includes=DIR],
[Specify location of kerberos4 headers]),[
CPPFLAGS="$CPPFLAGS -I$withval"
KRB4INC="$withval"
want_krb4=yes
])
AC_ARG_WITH(krb4-libs,
AC_HELP_STRING([--with-krb4-libs=DIR],[Specify location of kerberos4 libs]),[
LDFLAGS="$LDFLAGS -L$withval"
KRB4LIB="$withval"
want_krb4=yes
])
OPT_KRB4=off
AC_ARG_WITH(krb4,dnl
AC_HELP_STRING([--with-krb4=DIR],[where to look for Kerberos4]),[
OPT_KRB4="$withval"
if test X"$OPT_KRB4" != Xno; then
want_krb4="yes"
if test X"$OPT_KRB4" != Xyes; then
LDFLAGS="$LDFLAGS -L$OPT_KRB4/lib$libsuff"
KRB4LIB="$OPT_KRB4/lib$libsuff"
CPPFLAGS="$CPPFLAGS -I$OPT_KRB4/include"
KRB4INC="$OPT_KRB4/include"
fi
fi
])
AC_MSG_CHECKING([if Kerberos4 support is requested])
if test "$want_krb4" = yes
then
if test "$ipv6" = "yes"; then
echo krb4 is not compatible with IPv6
exit 1
fi
AC_MSG_RESULT(yes)
dnl Check for & handle argument to --with-krb4
AC_MSG_CHECKING(where to look for Kerberos4)
if test X"$OPT_KRB4" = Xyes
then
AC_MSG_RESULT([defaults])
else
AC_MSG_RESULT([libs in $KRB4LIB, headers in $KRB4INC])
fi
dnl Check for DES library
AC_CHECK_LIB(des, des_pcbc_encrypt,
[
AC_CHECK_HEADERS(des.h)
dnl resolv lib?
AC_CHECK_FUNC(res_search, , [AC_CHECK_LIB(resolv, res_search)])
dnl Check for the Kerberos4 library
AC_CHECK_LIB(krb, krb_net_read,
[
dnl Check for header files
AC_CHECK_HEADERS(krb.h)
dnl we found the required libraries, add to LIBS
LIBS="-lkrb -lcom_err -ldes $LIBS"
dnl Check for function krb_get_our_ip_for_realm
dnl this is needed for NAT networks
AC_CHECK_FUNCS(krb_get_our_ip_for_realm)
dnl add define KRB4
AC_DEFINE(HAVE_KRB4, 1,
[if you have the Kerberos4 libraries (including -ldes)])
dnl substitute it too!
KRB4_ENABLED=1
AC_SUBST(KRB4_ENABLED)
curl_krb4_msg="enabled"
dnl the krb4 stuff needs a strlcpy()
AC_CHECK_FUNCS(strlcpy)
])
])
else
AC_MSG_RESULT(no)
fi
dnl **********************************************************************
dnl Check for FBopenssl(SPNEGO) libraries
dnl **********************************************************************
AC_ARG_WITH(spnego,
AC_HELP_STRING([--with-spnego=DIR],
[Specify location of SPNEGO library fbopenssl]), [
SPNEGO_ROOT="$withval"
if test x"$SPNEGO_ROOT" != xno; then
want_spnego="yes"
fi
])
AC_MSG_CHECKING([if SPNEGO support is requested])
if test x"$want_spnego" = xyes; then
if test X"$SPNEGO_ROOT" = Xyes; then
AC_MSG_ERROR([FBOpenSSL libs and/or directories were not found where specified!])
AC_MSG_RESULT(no)
else
if test -z "$SPNEGO_LIB_DIR"; then
LDFLAGS="$LDFLAGS -L$SPNEGO_ROOT -lfbopenssl"
else
LDFLAGS="$LDFLAGS $SPNEGO_LIB_DIR"
fi
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_SPNEGO, 1,
[Define this if you have the SPNEGO library fbopenssl])
curl_spnego_msg="enabled"
fi
else
AC_MSG_RESULT(no)
fi
dnl **********************************************************************
dnl Check for GSS-API libraries
dnl **********************************************************************
AC_ARG_WITH(gssapi-includes,
AC_HELP_STRING([--with-gssapi-includes=DIR],
[Specify location of GSSAPI header]),
[ GSSAPI_INCS="-I$withval"
want_gss="yes" ]
)
AC_ARG_WITH(gssapi-libs,
AC_HELP_STRING([--with-gssapi-libs=DIR],
[Specify location of GSSAPI libs]),
[ GSSAPI_LIBS="-L$withval"
want_gss="yes" ]
)
AC_ARG_WITH(gssapi,
AC_HELP_STRING([--with-gssapi=DIR],
[Where to look for GSSAPI]), [
GSSAPI_ROOT="$withval"
if test x"$GSSAPI_ROOT" != xno; then
want_gss="yes"
fi
])
save_CPPFLAGS="$CPPFLAGS"
AC_MSG_CHECKING([if GSSAPI support is requested])
if test x"$want_gss" = xyes; then
AC_MSG_RESULT(yes)
if test -z "$GSSAPI_INCS"; then
if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
GSSAPI_INCS=`$GSSAPI_ROOT/bin/krb5-config --cflags gssapi`
elif test "$GSSAPI_ROOT" != "yes"; then
GSSAPI_INCS="-I$GSSAPI_ROOT/include"
fi
fi
CPPFLAGS="$CPPFLAGS $GSSAPI_INCS"
AC_CHECK_HEADER(gss.h,
[
dnl found in the given dirs
AC_DEFINE(HAVE_GSSGNU, 1, [if you have the GNU gssapi libraries])
gnu_gss=yes
],
[
dnl not found, check Heimdal
AC_CHECK_HEADER(gssapi.h,
[
dnl found in the given dirs
AC_DEFINE(HAVE_GSSHEIMDAL, 1, [if you have the Heimdal gssapi libraries])
],
[
dnl not found, check in gssapi/ subdir
AC_CHECK_HEADER(gssapi/gssapi.h,
[
dnl found
AC_DEFINE(HAVE_GSSMIT, 1, [if you have the MIT gssapi libraries])
],
[
dnl no header found, disabling GSS
want_gss=no
AC_MSG_WARN(disabling GSSAPI since no header files was found)
]
)
]
)
]
)
else
AC_MSG_RESULT(no)
fi
if test x"$want_gss" = xyes; then
AC_DEFINE(HAVE_GSSAPI, 1, [if you have the gssapi libraries])
curl_gss_msg="enabled (MIT/Heimdal)"
if test -n "$gnu_gss"; then
curl_gss_msg="enabled (GNU GSS)"
LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR -lgss"
elif test -z "$GSSAPI_LIB_DIR"; then
if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
gss_ldflags=`$GSSAPI_ROOT/bin/krb5-config --libs gssapi`
LDFLAGS="$LDFLAGS $gss_ldflags"
elif test "$GSSAPI_ROOT" != "yes"; then
LDFLAGS="$LDFLAGS -L$GSSAPI_ROOT/lib$libsuff -lgssapi"
else
LDFLAGS="$LDFLAGS -lgssapi"
fi
else
LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR -lgssapi"
fi
else
CPPFLAGS="$save_CPPFLAGS"
fi
dnl **********************************************************************
dnl Check for the presence of SSL libraries and headers
dnl **********************************************************************
dnl Default to compiler & linker defaults for SSL files & libraries.
OPT_SSL=off
dnl Default to no CA bundle
ca="no"
AC_ARG_WITH(ssl,dnl
AC_HELP_STRING([--with-ssl=PATH],[Where to look for OpenSSL, PATH points to the SSL installation (default: /usr/local/ssl); when possible, set the PKG_CONFIG_PATH environment variable instead of using this option])
AC_HELP_STRING([--without-ssl], [disable SSL]),
OPT_SSL=$withval)
if test X"$OPT_SSL" != Xno; then
dnl backup the pre-ssl variables
CLEANLDFLAGS="$LDFLAGS"
CLEANCPPFLAGS="$CPPFLAGS"
CLEANLIBS="$LIBS"
case "$OPT_SSL" in
yes)
dnl --with-ssl (without path) used
if test x$cross_compiling != xyes; then
dnl only do pkg-config magic when not cross-compiling
PKGTEST="yes"
fi
PREFIX_OPENSSL=/usr/local/ssl
LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
;;
off)
dnl no --with-ssl option given, just check default places
if test x$cross_compiling != xyes; then
dnl only do pkg-config magic when not cross-compiling
PKGTEST="yes"
fi
PREFIX_OPENSSL=
;;
*)
dnl check the given --with-ssl spot
PKGTEST="no"
PREFIX_OPENSSL=$OPT_SSL
LIB_OPENSSL="$PREFIX_OPENSSL/lib$libsuff"
LDFLAGS="$LDFLAGS -L$LIB_OPENSSL"
CPPFLAGS="$CPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
;;
esac
if test "$PKGTEST" = "yes"; then
dnl Detect the pkg-config tool, as it may have extra info about the
dnl openssl installation we can use. I *believe* this is what we are
dnl expected to do on really recent Redhat Linux hosts.
AC_PATH_PROG( PKGCONFIG, pkg-config, no, $PATH:/usr/bin:/usr/local/bin)
if test "$PKGCONFIG" != "no" ; then
AC_MSG_CHECKING([OpenSSL options with pkg-config])
$PKGCONFIG --exists openssl
SSL_EXISTS=$?
if test "$SSL_EXISTS" -eq "0"; then
SSL_LIBS=`$PKGCONFIG --libs-only-l openssl 2>/dev/null`
SSL_LDFLAGS=`$PKGCONFIG --libs-only-L openssl 2>/dev/null`
SSL_CPPFLAGS=`$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
LIB_OPENSSL=`echo $SSL_LDFLAGS | sed -e 's/-L//g'`
dnl use the values pkg-config reported
LIBS="$LIBS $SSL_LIBS"
CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
AC_MSG_RESULT([found])
else
AC_MSG_RESULT([no])
fi
fi
fi
dnl This is for Msys/Mingw
AC_MSG_CHECKING([for gdi32])
my_ac_save_LIBS=$LIBS
LIBS="-lgdi32 $LIBS"
AC_TRY_LINK([#include <windef.h>
#include <wingdi.h>],
[GdiFlush();],
[ dnl worked!
AC_MSG_RESULT([yes])],
[ dnl failed, restore LIBS
LIBS=$my_ac_save_LIBS
AC_MSG_RESULT(no)]
)
AC_CHECK_LIB(crypto, CRYPTO_lock,[
HAVECRYPTO="yes"
LIBS="-lcrypto $LIBS"
],[
LDFLAGS="$CLEANLDFLAGS -L$LIB_OPENSSL"
CPPFLAGS="$CLEANCPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
HAVECRYPTO="yes"
LIBS="-lcrypto $LIBS"], [
LDFLAGS="$CLEANLDFLAGS"
CPPFLAGS="$CLEANCPPFLAGS"
LIBS="$CLEANLIBS"
])
])
if test X"$HAVECRYPTO" = X"yes"; then
dnl This is only reasonable to do if crypto actually is there: check for
dnl SSL libs NOTE: it is important to do this AFTER the crypto lib
AC_CHECK_LIB(ssl, SSL_connect)
if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
dnl we didn't find the SSL lib, try the RSAglue/rsaref stuff
AC_MSG_CHECKING(for ssl with RSAglue/rsaref libs in use);
OLIBS=$LIBS
LIBS="$LIBS -lRSAglue -lrsaref"
AC_CHECK_LIB(ssl, SSL_connect)
if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
dnl still no SSL_connect
AC_MSG_RESULT(no)
LIBS=$OLIBS
else
AC_MSG_RESULT(yes)
fi
else
dnl Have the libraries--check for SSLeay/OpenSSL headers
AC_CHECK_HEADERS(openssl/x509.h openssl/rsa.h openssl/crypto.h \
openssl/pem.h openssl/ssl.h openssl/err.h,
curl_ssl_msg="enabled (OpenSSL)"
OPENSSL_ENABLED=1
AC_DEFINE(USE_OPENSSL, 1, [if OpenSSL is in use]))
if test $ac_cv_header_openssl_x509_h = no; then
AC_CHECK_HEADERS(x509.h rsa.h crypto.h pem.h ssl.h err.h,
curl_ssl_msg="enabled (OpenSSL)"
OPENSSL_ENABLED=1)
fi
fi
if test X"$OPENSSL_ENABLED" = X"1"; then
AC_DEFINE(USE_SSLEAY, 1, [if SSL is enabled])
dnl is there a pkcs12.h header present?
AC_CHECK_HEADERS(openssl/pkcs12.h)
else
LIBS="$CLEANLIBS"
fi
dnl USE_SSLEAY is the historical name for what configure calls
dnl OPENSSL_ENABLED; the names should really be unified
USE_SSLEAY="$OPENSSL_ENABLED"
AC_SUBST(USE_SSLEAY)
if test X"$OPT_SSL" != Xoff &&
test "$OPENSSL_ENABLED" != "1"; then
AC_MSG_ERROR([OpenSSL libs and/or directories were not found where specified!])
fi
fi
if test X"$OPENSSL_ENABLED" = X"1"; then
dnl If the ENGINE library seems to be around, check for the OpenSSL engine
dnl stuff, it is kind of "separated" from the main SSL check
AC_CHECK_FUNC(ENGINE_init,
[
