moparisthebest/USBHost_t36
1
0
Fork 0
mirror of https://github.com/gdsports/USBHost_t36 synced 2024-11-14 05:05:09 -05:00
Code Issues Releases Wiki Activity
ce2fafd18c
USBHost_t36/ehci.cpp
PaulStoffregen 252b9a2f24 (bare bones) Interrupt transfer support
2017-02-13 06:05:09 -08:00

752 lines
24 KiB
C++
Raw Blame History

/* USB EHCI Host for Teensy 3.6
* Copyright 2017 Paul Stoffregen (paul@pjrc.com)
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include <Arduino.h>
#include "USBHost.h"
#define PERIODIC_LIST_SIZE 32
static uint32_t periodictable[PERIODIC_LIST_SIZE] __attribute__ ((aligned(4096), used));
static uint8_t port_state;
#define PORT_STATE_DISCONNECTED 0
#define PORT_STATE_DEBOUNCE 1
#define PORT_STATE_RESET 2
#define PORT_STATE_RECOVERY 3
#define PORT_STATE_ACTIVE 4
static Device_t *rootdev=NULL;
static Transfer_t *async_followup_first=NULL;
static Transfer_t *async_followup_last=NULL;
static Transfer_t *periodic_followup_first=NULL;
static Transfer_t *periodic_followup_last=NULL;
static void init_qTD(volatile Transfer_t *t, void *buf, uint32_t len,
uint32_t pid, uint32_t data01, bool irq);
static bool followup_Transfer(Transfer_t *transfer);
static void add_to_async_followup_list(Transfer_t *first, Transfer_t *last);
static void remove_from_async_followup_list(Transfer_t *transfer);
static void add_to_periodic_followup_list(Transfer_t *first, Transfer_t *last);
static void remove_from_periodic_followup_list(Transfer_t *transfer);
static bool allocate_interrupt_pipe_bandwidth(uint32_t speed, uint32_t maxlen,
uint32_t interval, uint32_t direction, uint32_t *offset, uint32_t *smask,
uint32_t *cmask);
void USBHost::begin()
{
// Teensy 3.6 has USB host power controlled by PTE6
PORTE_PCR6 = PORT_PCR_MUX(1);
GPIOE_PDDR |= (1<<6);
GPIOE_PSOR = (1<<6); // turn on USB host power
Serial.print("sizeof Device = ");
Serial.println(sizeof(Device_t));
Serial.print("sizeof Pipe = ");
Serial.println(sizeof(Pipe_t));
Serial.print("sizeof Transfer = ");
Serial.println(sizeof(Transfer_t));
// configure the MPU to allow USBHS DMA to access memory
MPU_RGDAAC0 |= 0x30000000;
Serial.print("MPU_RGDAAC0 = ");
Serial.println(MPU_RGDAAC0, HEX);
// turn on clocks
MCG_C1 |= MCG_C1_IRCLKEN; // enable MCGIRCLK 32kHz
OSC0_CR |= OSC_ERCLKEN;
SIM_SOPT2 |= SIM_SOPT2_USBREGEN; // turn on USB regulator
SIM_SOPT2 &= ~SIM_SOPT2_USBSLSRC; // use IRC for slow clock
print("power up USBHS PHY");
SIM_USBPHYCTL |= SIM_USBPHYCTL_USBDISILIM; // disable USB current limit
//SIM_USBPHYCTL = SIM_USBPHYCTL_USBDISILIM | SIM_USBPHYCTL_USB3VOUTTRG(6); // pg 237
SIM_SCGC3 |= SIM_SCGC3_USBHSDCD | SIM_SCGC3_USBHSPHY | SIM_SCGC3_USBHS;
USBHSDCD_CLOCK = 33 << 2;
print("init USBHS PHY & PLL");
// init process: page 1681-1682
USBPHY_CTRL_CLR = (USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE); // // CTRL pg 1698
USBPHY_CTRL_SET = USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3;
//USBPHY_CTRL_SET = USBPHY_CTRL_FSDLL_RST_EN; // TODO: what does this do??
USBPHY_TRIM_OVERRIDE_EN_SET = 1;
USBPHY_PLL_SIC = USBPHY_PLL_SIC_PLL_POWER | USBPHY_PLL_SIC_PLL_ENABLE |
USBPHY_PLL_SIC_PLL_DIV_SEL(1) | USBPHY_PLL_SIC_PLL_EN_USB_CLKS;
// wait for the PLL to lock
int count=0;
while ((USBPHY_PLL_SIC & USBPHY_PLL_SIC_PLL_LOCK) == 0) {
count++;
}
Serial.print("PLL locked, waited ");
Serial.println(count);
// turn on power to PHY
USBPHY_PWD = 0;
delay(10);
// sanity check, connect 470K pullup & 100K pulldown and watch D+ voltage change
//USBPHY_ANACTRL_CLR = (1<<10); // turn off both 15K pulldowns... works! :)
// sanity check, output clocks on pin 9 for testing
//SIM_SOPT2 = SIM_SOPT2 & (~SIM_SOPT2_CLKOUTSEL(7)) | SIM_SOPT2_CLKOUTSEL(3); // LPO 1kHz
//SIM_SOPT2 = SIM_SOPT2 & (~SIM_SOPT2_CLKOUTSEL(7)) | SIM_SOPT2_CLKOUTSEL(2); // Flash
//SIM_SOPT2 = SIM_SOPT2 & (~SIM_SOPT2_CLKOUTSEL(7)) | SIM_SOPT2_CLKOUTSEL(6); // XTAL
//SIM_SOPT2 = SIM_SOPT2 & (~SIM_SOPT2_CLKOUTSEL(7)) | SIM_SOPT2_CLKOUTSEL(7); // IRC 48MHz
//SIM_SOPT2 = SIM_SOPT2 & (~SIM_SOPT2_CLKOUTSEL(7)) | SIM_SOPT2_CLKOUTSEL(4); // MCGIRCLK
//CORE_PIN9_CONFIG = PORT_PCR_MUX(5); // CLKOUT on PTC3 Alt5 (Arduino pin 9)
// now with the PHY up and running, start up USBHS
print("begin ehci reset");
USBHS_USBCMD |= USBHS_USBCMD_RST;
count = 0;
while (USBHS_USBCMD & USBHS_USBCMD_RST) {
count++;
}
print(" reset waited ", count);
init_Device_Pipe_Transfer_memory();
for (int i=0; i < 32; i++) {
periodictable[i] = 1;
}
port_state = PORT_STATE_DISCONNECTED;
USBHS_USB_SBUSCFG = 1; // System Bus Interface Configuration
// turn on the USBHS controller
//USBHS_USBMODE = USBHS_USBMODE_TXHSD(5) | USBHS_USBMODE_CM(3); // host mode
USBHS_USBMODE = USBHS_USBMODE_CM(3); // host mode
USBHS_USBINTR = 0;
USBHS_PERIODICLISTBASE = (uint32_t)periodictable;
USBHS_FRINDEX = 0;
USBHS_ASYNCLISTADDR = 0;
USBHS_USBCMD = USBHS_USBCMD_ITC(8) | USBHS_USBCMD_RS |
USBHS_USBCMD_ASP(3) | USBHS_USBCMD_ASPE | USBHS_USBCMD_PSE |
#if PERIODIC_LIST_SIZE == 8
USBHS_USBCMD_FS2 | USBHS_USBCMD_FS(3);
#elif PERIODIC_LIST_SIZE == 16
USBHS_USBCMD_FS2 | USBHS_USBCMD_FS(2);
#elif PERIODIC_LIST_SIZE == 32
USBHS_USBCMD_FS2 | USBHS_USBCMD_FS(1);
#elif PERIODIC_LIST_SIZE == 64
USBHS_USBCMD_FS2 | USBHS_USBCMD_FS(0);
#elif PERIODIC_LIST_SIZE == 128
USBHS_USBCMD_FS(3);
#elif PERIODIC_LIST_SIZE == 256
USBHS_USBCMD_FS(2);
#elif PERIODIC_LIST_SIZE == 512
USBHS_USBCMD_FS(1);
#elif PERIODIC_LIST_SIZE == 1024
USBHS_USBCMD_FS(0);
#else
#error "Unsupported PERIODIC_LIST_SIZE"
#endif
// turn on the USB port
//USBHS_PORTSC1 = USBHS_PORTSC_PP;
USBHS_PORTSC1 |= USBHS_PORTSC_PP;
//USBHS_PORTSC1 |= USBHS_PORTSC_PFSC; // force 12 Mbit/sec
//USBHS_PORTSC1 |= USBHS_PORTSC_PHCD; // phy off
Serial.print("USBHS_ASYNCLISTADDR = ");
Serial.println(USBHS_ASYNCLISTADDR, HEX);
Serial.print("USBHS_PERIODICLISTBASE = ");
Serial.println(USBHS_PERIODICLISTBASE, HEX);
Serial.print("periodictable = ");
Serial.println((uint32_t)periodictable, HEX);
// enable interrupts, after this point interruts to all the work
attachInterruptVector(IRQ_USBHS, isr);
NVIC_ENABLE_IRQ(IRQ_USBHS);
USBHS_USBINTR = USBHS_USBINTR_PCE | USBHS_USBINTR_TIE0;
USBHS_USBINTR |= USBHS_USBINTR_UEE | USBHS_USBINTR_SEE;
USBHS_USBINTR |= USBHS_USBINTR_AAE;
USBHS_USBINTR |= USBHS_USBINTR_UPIE | USBHS_USBINTR_UAIE;
}
// EHCI registers page default
// -------------- ---- -------
// USBHS_USBCMD 1599 00080000 USB Command
// USBHS_USBSTS 1602 00000000 USB Status
// USBHS_USBINTR 1606 00000000 USB Interrupt Enable
// USBHS_FRINDEX 1609 00000000 Frame Index Register
// USBHS_PERIODICLISTBASE 1610 undefine Periodic Frame List Base Address
// USBHS_ASYNCLISTADDR 1612 undefine Asynchronous List Address
// USBHS_PORTSC1 1619 00002000 Port Status and Control
// USBHS_USBMODE 1629 00005000 USB Mode
// USBHS_GPTIMERnCTL 1591 00000000 General Purpose Timer n Control
// PORT_STATE_DISCONNECTED 0
// PORT_STATE_DEBOUNCE 1
// PORT_STATE_RESET 2
// PORT_STATE_RECOVERY 3
// PORT_STATE_ACTIVE 4
void USBHost::isr()
{
uint32_t stat = USBHS_USBSTS;
USBHS_USBSTS = stat; // clear pending interrupts
//stat &= USBHS_USBINTR; // mask away unwanted interrupts
Serial.println();
Serial.print("ISR: ");
Serial.print(stat, HEX);
Serial.println();
if (stat & USBHS_USBSTS_UI) Serial.println(" USB Interrupt");
if (stat & USBHS_USBSTS_UEI) Serial.println(" USB Error");
if (stat & USBHS_USBSTS_PCI) Serial.println(" Port Change");
if (stat & USBHS_USBSTS_FRI) Serial.println(" Frame List Rollover");
if (stat & USBHS_USBSTS_SEI) Serial.println(" System Error");
if (stat & USBHS_USBSTS_AAI) Serial.println(" Async Advance (doorbell)");
if (stat & USBHS_USBSTS_URI) Serial.println(" Reset Recv");
if (stat & USBHS_USBSTS_SRI) Serial.println(" SOF");
if (stat & USBHS_USBSTS_SLI) Serial.println(" Suspend");
if (stat & USBHS_USBSTS_HCH) Serial.println(" Host Halted");
if (stat & USBHS_USBSTS_RCL) Serial.println(" Reclamation");
if (stat & USBHS_USBSTS_PS) Serial.println(" Periodic Sched En");
if (stat & USBHS_USBSTS_AS) Serial.println(" Async Sched En");
if (stat & USBHS_USBSTS_NAKI) Serial.println(" NAK");
if (stat & USBHS_USBSTS_UAI) Serial.println(" USB Async");
if (stat & USBHS_USBSTS_UPI) Serial.println(" USB Periodic");
if (stat & USBHS_USBSTS_TI0) Serial.println(" Timer0");
if (stat & USBHS_USBSTS_TI1) Serial.println(" Timer1");
if (stat & USBHS_USBSTS_UAI) { // completed qTD(s) from the async schedule
Serial.println("Async Followup");
print(async_followup_first, async_followup_last);
Transfer_t *p = async_followup_first;
while (p) {
if (followup_Transfer(p)) {
// transfer completed
Transfer_t *next = p->next_followup;
remove_from_async_followup_list(p);
free_Transfer(p);
p = next;
} else {
// transfer still pending
p = p->next_followup;
}
}
print(async_followup_first, async_followup_last);
}
if (stat & USBHS_USBSTS_UPI) { // completed qTD(s) from the periodic schedule
Serial.println("Periodic Followup");
Transfer_t *p = periodic_followup_first;
while (p) {
if (followup_Transfer(p)) {
// transfer completed
Transfer_t *next = p->next_followup;
remove_from_periodic_followup_list(p);
free_Transfer(p);
p = next;
} else {
// transfer still pending
p = p->next_followup;
}
}
}
if (stat & USBHS_USBSTS_PCI) { // port change detected
const uint32_t portstat = USBHS_PORTSC1;
Serial.print("port change: ");
Serial.print(portstat, HEX);
Serial.println();
USBHS_PORTSC1 = portstat | (USBHS_PORTSC_OCC|USBHS_PORTSC_PEC|USBHS_PORTSC_CSC);
if (portstat & USBHS_PORTSC_OCC) {
Serial.println(" overcurrent change");
}
if (portstat & USBHS_PORTSC_CSC) {
if (portstat & USBHS_PORTSC_CCS) {
Serial.println(" connect");
if (port_state == PORT_STATE_DISCONNECTED
|| port_state == PORT_STATE_DEBOUNCE) {
// 100 ms debounce (USB 2.0: TATTDB, page 150 & 188)
port_state = PORT_STATE_DEBOUNCE;
USBHS_GPTIMER0LD = 100000; // microseconds
USBHS_GPTIMER0CTL =
USBHS_GPTIMERCTL_RST | USBHS_GPTIMERCTL_RUN;
stat &= ~USBHS_USBSTS_TI0;
}
} else {
Serial.println(" disconnect");
port_state = PORT_STATE_DISCONNECTED;
USBPHY_CTRL_CLR = USBPHY_CTRL_ENHOSTDISCONDETECT;
// TODO: delete & clean up device state...
}
}
if (portstat & USBHS_PORTSC_PEC) {
// PEC bit only detects disable
Serial.println(" disable");
} else if (port_state == PORT_STATE_RESET && portstat & USBHS_PORTSC_PE) {
Serial.println(" port enabled");
port_state = PORT_STATE_RECOVERY;
// 10 ms reset recover (USB 2.0: TRSTRCY, page 151 & 188)
USBHS_GPTIMER0LD = 10000; // microseconds
USBHS_GPTIMER0CTL = USBHS_GPTIMERCTL_RST | USBHS_GPTIMERCTL_RUN;
if (USBHS_PORTSC1 & USBHS_PORTSC_HSP) {
// turn on high-speed disconnect detector
USBPHY_CTRL_SET = USBPHY_CTRL_ENHOSTDISCONDETECT;
}
}
if (portstat & USBHS_PORTSC_FPR) {
Serial.println(" force resume");
}
}
if (stat & USBHS_USBSTS_TI0) { // timer 0
Serial.println("timer");
if (port_state == PORT_STATE_DEBOUNCE) {
port_state = PORT_STATE_RESET;
USBHS_PORTSC1 |= USBHS_PORTSC_PR; // begin reset sequence
Serial.println(" begin reset");
} else if (port_state == PORT_STATE_RECOVERY) {
port_state = PORT_STATE_ACTIVE;
Serial.println(" end recovery");
// HCSPARAMS TTCTRL page 1671
uint32_t speed = (USBHS_PORTSC1 >> 26) & 3;
rootdev = new_Device(speed, 0, 0);
}
}
}
static uint32_t QH_capabilities1(uint32_t nak_count_reload, uint32_t control_endpoint_flag,
uint32_t max_packet_length, uint32_t head_of_list, uint32_t data_toggle_control,
uint32_t speed, uint32_t endpoint_number, uint32_t inactivate, uint32_t address)
{
return ( (nak_count_reload << 28) | (control_endpoint_flag << 27) |
(max_packet_length << 16) | (head_of_list << 15) |
(data_toggle_control << 14) | (speed << 12) | (endpoint_number << 8) |
(inactivate << 7) | (address << 0) );
}
static uint32_t QH_capabilities2(uint32_t high_bw_mult, uint32_t hub_port_number,
uint32_t hub_address, uint32_t split_completion_mask, uint32_t interrupt_schedule_mask)
{
return ( (high_bw_mult << 30) | (hub_port_number << 23) | (hub_address << 16) |
(split_completion_mask << 8) | (interrupt_schedule_mask << 0) );
}
// Create a new pipe. It's QH is added to the async or periodic schedule,
// and a halt qTD is added to the QH, so we can grow the qTD list later.
// dev: device owning this pipe/endpoint
// type: 0=control, 2=bulk, 3=interrupt
// endpoint: 0 for control, 1-15 for bulk or interrupt
// direction: 0=OUT, 1=IN (unused for control)
// maxlen: maximum packet size
// interval: polling interval for interrupt, power of 2, unused if control or bulk
//
Pipe_t * USBHost::new_Pipe(Device_t *dev, uint32_t type, uint32_t endpoint,
uint32_t direction, uint32_t maxlen, uint32_t interval)
{
Pipe_t *pipe;
Transfer_t *halt;
uint32_t c=0, dtc=0, smask=0, cmask=0, offset=0;
Serial.println("new_Pipe");
pipe = allocate_Pipe();
if (!pipe) return NULL;
halt = allocate_Transfer();
if (!halt) {
free_Pipe(pipe);
return NULL;
}
if (type == 3) {
// interrupt transfers require bandwidth & microframe scheduling
if (interval > PERIODIC_LIST_SIZE*8) interval = PERIODIC_LIST_SIZE*8;
if (dev->speed < 2 && interval < 8) interval = 8;
if (!allocate_interrupt_pipe_bandwidth(dev->speed,
maxlen, interval, direction, &offset, &smask, &cmask)) {
free_Transfer(halt);
free_Pipe(pipe);
return NULL;
}
}
memset(pipe, 0, sizeof(Pipe_t));
memset(halt, 0, sizeof(Transfer_t));
halt->qtd.next = 1;
halt->qtd.token = 0x40;
pipe->device = dev;
pipe->qh.next = (uint32_t)halt;
pipe->qh.alt_next = 1;
pipe->direction = direction;
pipe->type = type;
if (type == 0) {
// control
if (dev->speed < 2) c = 1;
dtc = 1;
} else if (type == 2) {
// bulk
} else if (type == 3) {
// interrupt
}
pipe->qh.capabilities[0] = QH_capabilities1(15, c, maxlen, 0,
dtc, dev->speed, endpoint, 0, dev->address);
pipe->qh.capabilities[1] = QH_capabilities2(1, dev->hub_port,
dev->hub_address, cmask, smask);
if (type == 0 || type == 2) {
// control or bulk: add to async queue
Pipe_t *list = (Pipe_t *)USBHS_ASYNCLISTADDR;
if (list == NULL) {
pipe->qh.capabilities[0] |= 0x8000; // H bit
pipe->qh.horizontal_link = (uint32_t)&(pipe->qh) | 2; // 2=QH
USBHS_ASYNCLISTADDR = (uint32_t)&(pipe->qh);
USBHS_USBCMD |= USBHS_USBCMD_ASE; // enable async schedule
Serial.println(" first in async list");
} else {
// EHCI 1.0: section 4.8.1, page 72
pipe->qh.horizontal_link = list->qh.horizontal_link;
list->qh.horizontal_link = (uint32_t)&(pipe->qh) | 2;
Serial.println(" added to async list");
}
} else if (type == 3) {
// interrupt: add to periodic schedule
// TODO: link it into the periodic table
// TODO: built tree...
//uint32_t finterval = interval >> 3;
//for (uint32_t i=offset; i < PERIODIC_LIST_SIZE; i += finterval) {
// uint32_t list = periodictable[i];
//}
// quick hack for testing, just put it into the first table entry
pipe->qh.horizontal_link = periodictable[0];
periodictable[0] = (uint32_t)&(pipe->qh) | 2; // 2=QH
Serial.print("init periodictable with ");
Serial.println(periodictable[0], HEX);
}
return pipe;
}
// Fill in the qTD fields (token & data)
// t the Transfer qTD to initialize
// buf data to transfer
// len length of data
// pid type of packet: 0=OUT, 1=IN, 2=SETUP
// data01 value of DATA0/DATA1 toggle on 1st packet
// irq whether to generate an interrupt when transfer complete
//
static void init_qTD(volatile Transfer_t *t, void *buf, uint32_t len,
uint32_t pid, uint32_t data01, bool irq)
{
t->qtd.alt_next = 1; // 1=terminate
if (data01) data01 = 0x80000000;
t->qtd.token = data01 | (len << 16) | (irq ? 0x8000 : 0) | (pid << 8) | 0x80;
uint32_t addr = (uint32_t)buf;
t->qtd.buffer[0] = addr;
addr &= 0xFFFFF000;
t->qtd.buffer[1] = addr + 0x1000;
t->qtd.buffer[2] = addr + 0x2000;
t->qtd.buffer[3] = addr + 0x3000;
t->qtd.buffer[4] = addr + 0x4000;
}
// Create a Control Transfer and queue it
//
bool USBHost::queue_Control_Transfer(Device_t *dev, setup_t *setup, void *buf, USBDriver *driver)
{
Transfer_t *transfer, *data, *status;
uint32_t status_direction;
Serial.println("new_Control_Transfer");
if (setup->wLength > 16384) return false; // max 16K data for control
transfer = allocate_Transfer();
if (!transfer) return false;
status = allocate_Transfer();
if (!status) {
free_Transfer(transfer);
return false;
}
if (setup->wLength > 0) {
data = allocate_Transfer();
if (!data) {
free_Transfer(transfer);
free_Transfer(status);
return false;
}
uint32_t pid = (setup->bmRequestType & 0x80) ? 1 : 0;
init_qTD(data, buf, setup->wLength, pid, 1, false);
transfer->qtd.next = (uint32_t)data;
data->qtd.next = (uint32_t)status;
status_direction = pid ^ 1;
} else {
transfer->qtd.next = (uint32_t)status;
status_direction = 1; // always IN, USB 2.0 page 226
}
Serial.print("setup address ");
Serial.println((uint32_t)setup, HEX);
init_qTD(transfer, setup, 8, 2, 0, false);
init_qTD(status, NULL, 0, status_direction, 1, true);
status->pipe = dev->control_pipe;
status->buffer = buf;
status->length = setup->wLength;
status->setup = setup;
status->driver = driver;
status->qtd.next = 1;
return queue_Transfer(dev->control_pipe, transfer);
}
// Create a Bulk or Interrupt Transfer and queue it
//
bool USBHost::queue_Data_Transfer(Pipe_t *pipe, void *buffer, uint32_t len, USBDriver *driver)
{
Transfer_t *transfer, *data, *next;
uint8_t *p = (uint8_t *)buffer;
uint32_t count;
bool last = false;
// TODO: option for zero length packet? Maybe in Pipe_t fields?
Serial.println("new_Data_Transfer");
// allocate qTDs
transfer = allocate_Transfer();
if (!transfer) return false;
data = transfer;
for (count=(len >> 14); count; count--) {
next = allocate_Transfer();
if (!next) {
// free already-allocated qTDs
while (1) {
next = (Transfer_t *)transfer->qtd.next;
free_Transfer(transfer);
if (transfer == data) break;
transfer = next;
}
return false;
}
data->qtd.next = (uint32_t)next;
data = next;
}
// last qTD needs info for followup
data->qtd.next = 1;
data->pipe = pipe;
data->buffer = buffer;
data->length = len;
data->setup = NULL;
data->driver = driver;
// initialize all qTDs
data = transfer;
while (1) {
uint32_t count = len;
if (count > 16384) {
count = 16384;
} else {
last = true;
}
init_qTD(data, p, count, pipe->direction, 0, last);
if (last) break;
p += count;
len -= count;
data = (Transfer_t *)(data->qtd.next);
}
return queue_Transfer(pipe, transfer);
}
bool USBHost::queue_Transfer(Pipe_t *pipe, Transfer_t *transfer)
{
// find halt qTD
Transfer_t *halt = (Transfer_t *)(pipe->qh.next);
while (!(halt->qtd.token & 0x40)) halt = (Transfer_t *)(halt->qtd.next);
// transfer's token
uint32_t token = transfer->qtd.token;
// transfer becomes new halt qTD
transfer->qtd.token = 0x40;
// copy transfer non-token fields to halt
halt->qtd.next = transfer->qtd.next;
halt->qtd.alt_next = transfer->qtd.alt_next;
halt->qtd.buffer[0] = transfer->qtd.buffer[0]; // TODO: optimize memcpy, all
halt->qtd.buffer[1] = transfer->qtd.buffer[1]; // fields except token
halt->qtd.buffer[2] = transfer->qtd.buffer[2];
halt->qtd.buffer[3] = transfer->qtd.buffer[3];
halt->qtd.buffer[4] = transfer->qtd.buffer[4];
halt->pipe = pipe;
halt->buffer = transfer->buffer;
halt->length = transfer->length;
halt->setup = transfer->setup;
halt->driver = transfer->driver;
// find the last qTD we're adding
Transfer_t *last = halt;
while ((uint32_t)(last->qtd.next) != 1) last = (Transfer_t *)(last->qtd.next);
// last points to transfer (which becomes new halt)
last->qtd.next = (uint32_t)transfer;
transfer->qtd.next = 1;
// link all the new qTD by next_followup & prev_followup
Transfer_t *prev = NULL;
Transfer_t *p = halt;
while (p->qtd.next != (uint32_t)transfer) {
Transfer_t *next = (Transfer_t *)p->qtd.next;
p->prev_followup = prev;
p->next_followup = next;
prev = p;
p = next;
}
p->prev_followup = prev;
p->next_followup = NULL;
print(halt, p);
// add them to a followup list
if (pipe->type == 0 || pipe->type == 2) {
// control or bulk
add_to_async_followup_list(halt, p);
} else {
// interrupt
add_to_periodic_followup_list(halt, p);
}
// old halt becomes new transfer, this commits all new qTDs to QH
halt->qtd.token = token;
return true;
}
static bool followup_Transfer(Transfer_t *transfer)
{
Serial.print(" Followup ");
Serial.println((uint32_t)transfer, HEX);
if (!(transfer->qtd.token & 0x80)) {
// TODO: check error status
if (transfer->qtd.token & 0x8000) {
// this transfer caused an interrupt
if (transfer->pipe->callback_function) {
// do the callback
(*(transfer->pipe->callback_function))(transfer);
}
}
// do callback function...
Serial.println(" completed");
return true;
}
return false;
}
static void add_to_async_followup_list(Transfer_t *first, Transfer_t *last)
{
last->next_followup = NULL; // always add to end of list
if (async_followup_last == NULL) {
first->prev_followup = NULL;
async_followup_first = first;
} else {
first->prev_followup = async_followup_last;
async_followup_last->next_followup = first;
}
async_followup_last = last;
}
static void remove_from_async_followup_list(Transfer_t *transfer)
{
Transfer_t *next = transfer->next_followup;
Transfer_t *prev = transfer->prev_followup;
if (prev) {
prev->next_followup = next;
} else {
async_followup_first = next;
}
if (next) {
next->prev_followup = prev;
} else {
async_followup_last = prev;
}
}
static void add_to_periodic_followup_list(Transfer_t *first, Transfer_t *last)
{
last->next_followup = NULL; // always add to end of list
if (periodic_followup_last == NULL) {
first->prev_followup = NULL;
periodic_followup_first = first;
} else {
first->prev_followup = periodic_followup_last;
periodic_followup_last->next_followup = first;
}
periodic_followup_last = last;
}
static void remove_from_periodic_followup_list(Transfer_t *transfer)
{
Transfer_t *next = transfer->next_followup;
Transfer_t *prev = transfer->prev_followup;
if (prev) {
prev->next_followup = next;
} else {
periodic_followup_first = next;
}
if (next) {
next->prev_followup = prev;
} else {
periodic_followup_last = prev;
}
}
// Allocate bandwidth for an interrupt pipe. Given the packet size
// and other parameters, find the best place to schedule this pipe.
// Returns true if enough bandwidth is available, and the best
// frame offset, smask and cmask. Or returns false if no group
// of microframes has enough bandwidth available.
//
// speed: [in] 0=full speed, 1=low speed, 2=high speed
// maxlen: [in] maximum packet length
// interval: [in] polling interval, in 125 us micro frames
// direction: [in] 0=OUT, 1=IN
// offset: [out] frame offset, 0 to PERIODIC_LIST_SIZE-1
// smask: [out] Start Mask
// cmask: [out] Complete Mask
//
static bool allocate_interrupt_pipe_bandwidth(uint32_t speed, uint32_t maxlen,
uint32_t interval, uint32_t direction, uint32_t *offset, uint32_t *smask,
uint32_t *cmask)
{
// TODO: actual bandwidth planning needs to go here... but for
// now we'll just always pile up everything at the same offset
// and same microframe schedule for split transactions, without
// even the slighest check whether it all fits.
if (speed == 2) {
// high speed 480 Mbit/sec
if (interval == 1) {
*smask = 0xFF;
} else if (interval == 2) {
*smask = 0x55;
} else if (interval <= 4) {
*smask = 0x11;
} else {
*smask = 0x01;
}
*cmask = 0;
*offset = 0;
} else {
// full speed 12 Mbit/sec or low speed 1.5 Mbit/sec
*smask = 0x01;
*cmask = 0x3C;
*offset = 0;
}
return true;
}
Reference in New Issue View Git Blame Copy Permalink