/* USB EHCI Host for Teensy 3.6 * Copyright 2017 Paul Stoffregen (paul@pjrc.com) * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include #include "USBHost.h" USBHub::USBHub() : debouncetimer(this), /* mytimer(this), */ othertimer(this) { // TODO: free Device_t, Pipe_t & Transfer_t we will need driver_ready_for_device(this); } bool USBHub::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t len) { // only claim entire device, never at interface level if (type != 0) return false; println("USBHub memory usage = ", sizeof(USBHub)); println("USBHub claim_device this=", (uint32_t)this, HEX); // timer testing TODO: remove this later mytimer.init(this); mytimer.pointer = (void *)"This is mytimer"; //mytimer.start(99129); othertimer.pointer = (void *)"Hello, I'm othertimer"; //othertimer.start(12345); debouncetimer.pointer = (void *)"Debounce Timer"; for (int i=0; i < 7; i++) { mytimers[i].init(this); //mytimers[i].start((i + 1) * 10000); } // check for HUB type if (dev->bDeviceClass != 9 || dev->bDeviceSubClass != 0) return false; // protocol must be 0=FS, 1=HS Single-TT, or 2=HS Multi-TT if (dev->bDeviceProtocol > 2) return false; // check for endpoint descriptor if (descriptors[9] != 7 || descriptors[10] != 5) return false; // endpoint must be IN direction if ((descriptors[11] & 0xF0) != 0x80) return false; // endpoint type must be interrupt if (descriptors[12] != 3) return false; // get the endpoint number, must not be zero endpoint = descriptors[11] & 0x0F; if (endpoint == 0) return false; // get the maximum packet size uint32_t maxsize = descriptors[13] | (descriptors[14] << 8); if (maxsize == 0) return false; if (maxsize > 1) return false; // do hub chips with > 7 ports exist? interval = descriptors[15]; println(" polling interval = ", interval); println(descriptors[9]); println(descriptors[10]); println(descriptors[11], HEX); println(maxsize); // bDeviceProtocol = 0 is full speed // bDeviceProtocol = 1 is high speed single TT // bDeviceProtocol = 2 is high speed multiple TT println("bDeviceClass = ", dev->bDeviceClass); println("bDeviceSubClass = ", dev->bDeviceSubClass); println("bDeviceProtocol = ", dev->bDeviceProtocol); numports = 0; // unknown until hub descriptor is read changepipe = NULL; changebits = 0; memset(portstate, 0, sizeof(portstate)); mk_setup(setup[0], 0xA0, 6, 0x2900, 0, sizeof(hub_desc)); queue_Control_Transfer(dev, &setup[0], hub_desc, this); return true; } void USBHub::send_poweron(uint32_t port) { if (port == 0 || port > numports) return; mk_setup(setup[port], 0x23, 3, 8, port, 0); queue_Control_Transfer(device, &setup[port], NULL, this); } void USBHub::send_getstatus(uint32_t port) { if (port > numports) return; println("getstatus, port = ", port); mk_setup(setup[port], ((port > 0) ? 0xA3 : 0xA0), 0, 0, port, 4); queue_Control_Transfer(device, &setup[port], &statusbits[port], this); } void USBHub::send_clearstatus(uint32_t port) { if (port > numports) return; mk_setup(setup[port], ((port > 0) ? 0x23 : 0x20), 1, 0x10, port, 0); queue_Control_Transfer(device, &setup[port], NULL, this); } void USBHub::send_setreset(uint32_t port) { if (port == 0 || port > numports) return; println("send_setreset"); mk_setup(setup[port], 0x23, 3, 4, port, 0); // set feature PORT_RESET queue_Control_Transfer(device, &setup[port], NULL, this); } void USBHub::control(const Transfer_t *transfer) { println("USBHub control callback"); print_hexbytes(transfer->buffer, transfer->length); uint32_t port = transfer->setup.wIndex; uint32_t mesg = transfer->setup.word1; switch (mesg) { case 0x290006A0: // read hub descriptor numports = hub_desc[2]; characteristics = hub_desc[3]; powertime = hub_desc[5]; // TODO: do we need to use the DeviceRemovable // bits to make synthetic device connect events? println("Hub ports = ", numports); for (uint32_t i=1; i <= numports; i++) { send_poweron(i); } break; case 0x00080323: // power turned on if (port == numports && changepipe == NULL) { println("power turned on to all ports"); println("device addr = ", device->address); changepipe = new_Pipe(device, 3, endpoint, 1, 1, interval); println("pipe cap1 = ", changepipe->qh.capabilities[0], HEX); changepipe->callback_function = callback; queue_Data_Transfer(changepipe, &changebits, 1, this); } break; case 0x000000A0: // get hub status println("New Hub Status"); send_clearstatus(0); break; case 0x000000A3: // get port status println("New Port Status"); if (transfer->length == 4) { uint32_t status = *(uint32_t *)(transfer->buffer); if (status != statusbits[port]) println("ERROR: status not same"); new_port_status(port, status); } //if (changebits & (1 << port)) { //changebits &= ~(1 << port); send_clearstatus(port); //} break; case 0x00100120: // clear hub status println("Hub Status Cleared"); break; case 0x00100123: // clear port status println("Port Status Cleared, port=", port); break; default: println("unhandled setup, message = ", mesg, HEX); } } void USBHub::callback(const Transfer_t *transfer) { //println("HUB Callback (static)"); if (transfer->driver) ((USBHub *)(transfer->driver))->status_change(transfer); } void USBHub::status_change(const Transfer_t *transfer) { println("HUB Callback (member)"); println("status = ", changebits, HEX); for (uint32_t i=0; i <= numports; i++) { if (changebits & (1 << i)) { send_getstatus(i); } } queue_Data_Transfer(changepipe, &changebits, 1, this); } void USBHub::new_port_status(uint32_t port, uint32_t status) { if (port == 0 || port > numports) return; #if 1 print(" status="); print(status, HEX); println(" port=", port); println(" state=", portstate[port-1]); // status bits, USB 2.0: 11.24.2.7.1 page 427 if (status & 0x0001) println(" Device is present: "); if (status & 0x0002) { println(" Enabled, speed = "); if (status & 0x0200) { print("1.5"); } else { if (status & 0x0400) { print("480"); } else { print("12"); } } println(" Mbit/sec"); } if (status & 0x0004) println(" Suspended"); if (status & 0x0008) println(" Over-current"); if (status & 0x0010) println(" Reset"); if (status & 0x0100) println(" Has Power"); if (status & 0x0800) println(" Test Mode"); if (status & 0x1000) println(" Software Controls LEDs"); #endif uint8_t &state = portstate[port-1]; switch (state) { case PORT_OFF: case PORT_DISCONNECT: if (status & 0x0001) { // connected state = PORT_DEBOUNCE1; start_debounce_timer(port); } break; case PORT_DEBOUNCE1: case PORT_DEBOUNCE2: case PORT_DEBOUNCE3: case PORT_DEBOUNCE4: case PORT_DEBOUNCE5: if (status & 0x0001) { if (++state > PORT_DEBOUNCE5) { // TODO: check for exclusive access to // enumeration process... stay in debounce // and add to wait list if enumeration busy stop_debounce_timer(port); println("sending reset"); send_setreset(port); } } else { state = PORT_DISCONNECT; } break; case PORT_RESET: case PORT_RECOVERY: case PORT_ACTIVE: break; } /* if ((status & 0x0001) && !(priorstatus & 0x0001)) { println(" connect"); // 100 ms debounce (USB 2.0: TATTDB, page 150 & 188) //delay(100); // TODO: horribly bad... need timing events //reset(port); // TODO... reset timer? } else if (!(status & 0x0001) && (priorstatus & 0x0001)) { println(" disconnect"); } */ } void USBHub::timer_event(USBDriverTimer *timer) { uint32_t us = micros() - timer->started_micros; print("timer event ("); print(us); print(" us): "); print((char *)timer->pointer); print(", this = "); print((uint32_t)this, HEX); println(", timer = ", (uint32_t)timer, HEX); if (timer == &debouncetimer) { uint32_t in_use = debounce_in_use; if (in_use != 0) { for (uint32_t i=1; i < numports; i++) { if (in_use & (1 << i)) send_getstatus(i); } debouncetimer.start(20000); } } } void USBHub::start_debounce_timer(uint32_t port) { if (debounce_in_use == 0) debouncetimer.start(20000); debounce_in_use |= (1 << port); } void USBHub::stop_debounce_timer(uint32_t port) { debounce_in_use &= ~(1 << port); } void USBHub::disconnect() { // TODO: free resources } /* config descriptor from a Multi-TT hub 09 02 29 00 01 01 00 E0 32 09 04 00 00 01 09 00 01 00 07 05 81 03 01 00 0C 09 04 00 01 01 09 00 02 00 07 05 81 03 01 00 0C */