/* USB EHCI Host for Teensy 3.6 * Copyright 2017 Paul Stoffregen (paul@pjrc.com) * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include #include "USBHost_t36.h" // Read this header first for key info #define print USBHost::print_ #define println USBHost::println_ /************************************************************/ // Control Transfer For Configuration /************************************************************/ typedef struct { uint32_t dwDTERate; // Data Terminal Rate in bits per second uint8_t bCharFormat; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits uint8_t bParityType; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space uint8_t bDataBits; // Data bits (5, 6, 7, 8 or 16) } LINE_CODING; /************************************************************/ // Initialization and claiming of devices & interfaces /************************************************************/ void USBSerial::init() { contribute_Pipes(mypipes, sizeof(mypipes)/sizeof(Pipe_t)); contribute_Transfers(mytransfers, sizeof(mytransfers)/sizeof(Transfer_t)); contribute_String_Buffers(mystring_bufs, sizeof(mystring_bufs)/sizeof(strbuf_t)); driver_ready_for_device(this); } bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t len) { // only claim at interface level println("USBSerial claim this=", (uint32_t)this, HEX); print("vid=", dev->idVendor, HEX); print(", pid=", dev->idProduct, HEX); print(", bDeviceClass = ", dev->bDeviceClass); print(", bDeviceSubClass = ", dev->bDeviceSubClass); println(", bDeviceProtocol = ", dev->bDeviceProtocol); print_hexbytes(descriptors, len); if (type == 0) { if (dev->idVendor == 0x0403 && dev->idProduct == 0x6001) { // FTDI FT232 println("len = ", len); if (len < 23) return false; if (descriptors[0] != 9) return false; // length 9 if (descriptors[9] != 7) return false; // length 7 if (descriptors[10] != 5) return false; // ep desc uint32_t rxep = descriptors[11]; if (descriptors[12] != 2) return false; // bulk type if (descriptors[13] != 64) return false; // size 64 if (descriptors[14] != 0) return false; if (descriptors[16] != 7) return false; // length 7 if (descriptors[17] != 5) return false; // ep desc uint32_t txep = descriptors[18]; if (descriptors[19] != 2) return false; // bulk type if (descriptors[20] != 64) return false; // size 64 if (descriptors[21] != 0) return false; if (!check_rxtx_ep(rxep, txep)) return false; print("FTDI, rxep=", rxep & 15); println(", txep=", txep); if (!init_buffers(64, 64)) return false; rxpipe = new_Pipe(dev, 2, rxep & 15, 1, 64); if (!rxpipe) return false; txpipe = new_Pipe(dev, 2, txep, 0, 64); if (!txpipe) { // TODO: free rxpipe return false; } sertype = FTDI; rxpipe->callback_function = rx_callback; queue_Data_Transfer(rxpipe, rx1, 64, this); rxstate = 1; if (rxsize > 128) { queue_Data_Transfer(rxpipe, rx2, 64, this); rxstate = 3; } txstate = 0; txpipe->callback_function = tx_callback; baudrate = 115200; pending_control = 0x0F; mk_setup(setup, 0x40, 0, 0, 0, 0); // reset port queue_Control_Transfer(dev, &setup, NULL, this); control_queued = true; return true; } else if ((dev->bDeviceClass == 2) && (dev->bDeviceSubClass == 0)) { // It is a communication device see if we can extract the data... // Try some ttyACM types? // This code may be similar to MIDI code. // But first pass see if we can simply look at the interface... // Lets walk through end points and see if we // can find an RX and TX bulk transfer end point. // 0 1 2 3 4 5 6 7 8 *9 10 1 2 3 *4 5 6 7 *8 9 20 1 2 *3 4 5 6 7 8 9*30 1 2 3 4 5 6 7 8 *9 40 1 2 3 4 5 *6 7 8 9 50 1 2 // USB2AX //09 04 00 00 01 02 02 01 00 05 24 00 10 01 04 24 02 06 05 24 06 00 01 07 05 82 03 08 00 FF 09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01 //09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01 // Teensy 3.6 //09 04 00 00 01 02 02 01 00 05 24 00 10 01 05 24 01 01 01 04 24 02 06 05 24 06 00 01 07 05 82 03 10 00 40 09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00 //09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00 const uint8_t *p = descriptors; const uint8_t *end = p + len; if (p[0] != 9 || p[1] != 4) return false; // interface descriptor //println(" bInterfaceClass=", p[5]); //println(" bInterfaceSubClass=", p[6]); if (p[5] != 2) return false; // bInterfaceClass: 2 Communications if (p[6] != 2) return false; // bInterfaceSubClass: 2 serial p += 9; println(" Interface is Serial"); uint8_t rx_ep = 0; uint8_t tx_ep = 0; uint16_t rx_size = 0; uint16_t tx_size = 0; interface = 0; // clear out any interface numbers passed in. while (p < end) { len = *p; if (len < 4) return false; if (p + len > end) return false; // reject if beyond end of data uint32_t type = p[1]; //println("type: ", type); // Unlike Audio, we need to look at Interface as our endpoints are after them... if (type == 4 ) { // Interface - lets remember it's number... interface = p[2]; println(" Interface: ", interface); } else if (type == 0x24) { // 0x24 = CS_INTERFACE, uint32_t subtype = p[2]; print(" CS_INTERFACE - subtype: ", subtype); if (len >= 4) print(" ", p[3], HEX); if (len >= 5) print(" ", p[4], HEX); if (len >= 6) print(" ", p[5], HEX); switch (subtype) { case 0: println(" - Header Functional Descriptor"); break; case 1: println(" - Call Management Functional"); break; case 2: println(" - Abstract Control Management"); break; case 4: println(" - Telephone Ringer"); break; case 6: println(" - union Functional"); break; default: println(" - ??? other"); break; } // First pass ignore... } else if (type == 5) { // endpoint descriptor if (p[0] < 7) return false; // at least 7 bytes if (p[3] == 2) { // First try ignore the first one which is interrupt... println(" Endpoint: ", p[2], HEX); switch (p[2] & 0xF0) { case 0x80: // IN endpoint if (rx_ep == 0) { rx_ep = p[2] & 0x0F; rx_size = p[4] | (p[5] << 8); println(" rx_size = ", rx_size); } break; case 0x00: // OUT endpoint if (tx_ep == 0) { tx_ep = p[2]; tx_size = p[4] | (p[5] << 8); println(" tx_size = ", tx_size); } break; default: println(" invalid end point: ", p[2]); return false; } } } else { println(" Unknown type: ", type); return false; // unknown } p += len; } print(" exited loop rx:", rx_ep); println(", tx:", tx_ep); if (!rx_ep || !tx_ep) return false; // did not get our two end points if (!init_buffers(rx_size, tx_size)) return false; rxpipe = new_Pipe(dev, 2, rx_ep & 15, 1, rx_size); if (!rxpipe) return false; txpipe = new_Pipe(dev, 2, tx_ep, 0, tx_size); if (!txpipe) { // TODO: free rxpipe return false; } sertype = CDCACM; rxpipe->callback_function = rx_callback; queue_Data_Transfer(rxpipe, rx1, (rx_size < 64)? rx_size : 64, this); rxstate = 1; if (rx_size > 128) { queue_Data_Transfer(rxpipe, rx2, rx_size, this); rxstate = 3; } txstate = 0; txpipe->callback_function = tx_callback; baudrate = 115200; // Wish I could just call Control to do the output... Maybe can defer until the user calls begin() // control requires that device is setup which is not until this call completes... println("Control - CDCACM DTR..."); // Need to setup the data the line coding data mk_setup(setup, 0x21, 0x22, 3, 0, 0); queue_Control_Transfer(dev, &setup, NULL, this); control_queued = true; pending_control = 0x0; // Maybe don't need to do... return true; } #if 1 // BUGBUG: Note: there are probably more vendor/product pairs.. Maybe should create table of them if (dev->idVendor == 0x67B && dev->idProduct == 0x2303) { // Prolific Technology, Inc. PL2303 Serial Port println("len = ", len); uint8_t count_end_points = descriptors[4]; if (count_end_points < 2) return false; // not enough end points if (len < 23) return false; if (descriptors[0] != 9) return false; // length 9 // Lets walk through end points and see if we // can find an RX and TX bulk transfer end point. //vid=67B, pid=2303 // 0 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 20 1 2 3 4 5 6 7 8 9 //09 04 00 00 03 FF 00 00 00 07 05 81 03 0A 00 01 07 05 02 02 40 00 00 07 05 83 02 40 00 00 uint32_t rxep = 0; uint32_t txep = 0; uint32_t descriptor_index = 9; while (count_end_points-- && ((rxep == 0) || txep == 0)) { if (descriptors[descriptor_index] != 7) return false; // length 7 if (descriptors[descriptor_index+1] != 5) return false; // ep desc if ((descriptors[descriptor_index+3] == 2) && (descriptors[descriptor_index+4] == 64) && (descriptors[descriptor_index+5] == 0)) { // have a bulk EP size if (descriptors[descriptor_index+2] & 0x80 ) { rxep = descriptors[descriptor_index+2]; } else { txep = descriptors[descriptor_index+2]; } } descriptor_index += 7; // setup to look at next one... } // Try to verify the end points. if (!check_rxtx_ep(rxep, txep)) return false; print("FTDI, rxep=", rxep & 15); println(", txep=", txep); if (!init_buffers(64, 64)) return false; rxpipe = new_Pipe(dev, 2, rxep & 15, 1, 64); if (!rxpipe) return false; txpipe = new_Pipe(dev, 2, txep, 0, 64); if (!txpipe) { // TODO: free rxpipe return false; } sertype = PL2303; rxpipe->callback_function = rx_callback; queue_Data_Transfer(rxpipe, rx1, 64, this); rxstate = 1; if (rxsize > 128) { queue_Data_Transfer(rxpipe, rx2, 64, this); rxstate = 3; } txstate = 0; txpipe->callback_function = tx_callback; baudrate = 115200; // Lets see if it will handle the same CDCACM - messages? println("PL2303: readRegister(0x04)"); // Need to setup the data the line coding data mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1); queue_Control_Transfer(dev, &setup, setupdata, this); control_queued = true; setup_state = 1; // We are at step one of setup... pending_control = 0x3f; // Maybe don't need to do... return true; } #endif } else if (type != 1) return false; #if 1 // Try some ttyACM types? // This code may be similar to MIDI code. // But first pass see if we can simply look at the interface... // Lets walk through end points and see if we // can find an RX and TX bulk transfer end point. // 0 1 2 3 4 5 6 7 8 *9 10 1 2 3 *4 5 6 7 *8 9 20 1 2 *3 4 5 6 7 8 9*30 1 2 3 4 5 6 7 8 *9 40 1 2 3 4 5 *6 7 8 9 50 1 2 // USB2AX //09 04 00 00 01 02 02 01 00 05 24 00 10 01 04 24 02 06 05 24 06 00 01 07 05 82 03 08 00 FF //09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01 // Teensy 3.6 //09 04 00 00 01 02 02 01 00 05 24 00 10 01 05 24 01 01 01 04 24 02 06 05 24 06 00 01 07 05 82 03 10 00 40 //09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00 if (descriptors[0] != 9 || descriptors[1] != 4) return false; // interface descriptor if (descriptors[4] < 2) return false; // less than 2 end points if (descriptors[5] != 0xA) return false; // bInterfaceClass, 0xa = CDC data if (descriptors[6] != 0) return false; // bInterfaceSubClass if (descriptors[7] != 0) return false; // bInterfaceProtocol, 1 = Keyboard if (descriptors[9] != 7) return false; // length 7 if (descriptors[10] != 5) return false; // ep desc uint32_t txep = descriptors[11]; uint32_t txsize = descriptors[13]; if (descriptors[12] != 2) return false; // bulk type if (descriptors[13] > 64) return false; // size 64 Max if (descriptors[14] != 0) return false; if (descriptors[16] != 7) return false; // length 7 if (descriptors[17] != 5) return false; // ep desc uint32_t rxep = descriptors[18]; uint32_t rxsize = descriptors[20]; if (descriptors[19] != 2) return false; // bulk type if (descriptors[20] > 64) return false; // size 64 Max if (descriptors[21] != 0) return false; if (!check_rxtx_ep(rxep, txep)) return false; interface = descriptors[2]; print("CDC, rxep=", rxep & 15); println(", txep=", txep); if (!init_buffers(rxsize, txsize)) return false; rxpipe = new_Pipe(dev, 2, rxep & 15, 1, rxsize); if (!rxpipe) return false; txpipe = new_Pipe(dev, 2, txep, 0, txsize); if (!txpipe) { // TODO: free rxpipe return false; } sertype = CDCACM; rxpipe->callback_function = rx_callback; queue_Data_Transfer(rxpipe, rx1, 64, this); rxstate = 1; if (rxsize > 128) { queue_Data_Transfer(rxpipe, rx2, 64, this); rxstate = 3; } txstate = 0; txpipe->callback_function = tx_callback; // See if we can do just the inteface... baudrate = 115200; println("Control - CDCACM LINE_CODING"); setupdata[0] = 0; // Setup baud rate 115200 - 0x1C200 setupdata[1] = 0xc2; setupdata[2] = 0x1; setupdata[3] = 0; setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16) mk_setup(setup, 0x21, 0x20, 0, 0, 7); queue_Control_Transfer(dev, &setup, setupdata, this); pending_control = 0x04; // Maybe don't need to do... control_queued = true; return true; #else return false; #endif } // check if two legal endpoints, 1 receive & 1 transmit bool USBSerial::check_rxtx_ep(uint32_t &rxep, uint32_t &txep) { if ((rxep & 0x0F) == 0) return false; if ((txep & 0x0F) == 0) return false; uint32_t rxdir = rxep & 0xF0; uint32_t txdir = txep & 0xF0; if (rxdir == 0x80 && txdir == 0x00) { return true; } if (rxdir == 0x00 && txdir == 0x80) { std::swap(rxep, txep); return true; } return false; } // initialize buffer sizes and pointers bool USBSerial::init_buffers(uint32_t rsize, uint32_t tsize) { // buffer must be able to hold 2 of each packet, plus buffer // space to hold RX and TX data. if (sizeof(bigbuffer) < (rsize + tsize) * 3 + 2) return false; rx1 = (uint8_t *)bigbuffer; rx2 = rx1 + rsize; tx1 = rx2 + rsize; tx2 = tx1 + tsize; rxbuf = tx2 + tsize; // FIXME: this assume 50-50 split - not true when rsize != tsize rxsize = (sizeof(bigbuffer) - (rsize + tsize) * 2) / 2; txsize = rxsize; txbuf = rxbuf + rxsize; rxhead = 0; rxtail = 0; txhead = 0; txtail = 0; rxstate = 0; return true; } void USBSerial::disconnect() { } void USBSerial::control(const Transfer_t *transfer) { println("control callback (serial) ", pending_control, HEX); control_queued = false; // We will split this up by Serial type, maybe different functions? //------------------------------------------------------------------------- // First FTDI if (sertype == FTDI) { if (pending_control & 1) { pending_control &= ~1; // set data format mk_setup(setup, 0x40, 4, 8, 0, 0); // data format 8N1 queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } // set baud rate if (pending_control & 2) { pending_control &= ~2; uint32_t baudval = 3000000 / baudrate; mk_setup(setup, 0x40, 3, baudval, 0, 0); queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } // configure flow control if (pending_control & 4) { pending_control &= ~4; mk_setup(setup, 0x40, 2, 0, 1, 0); queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } // set DTR if (pending_control & 8) { pending_control &= ~8; mk_setup(setup, 0x40, 1, 0x0101, 0, 0); queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } } //------------------------------------------------------------------------- // Now CDCACM if (sertype == CDCACM) { if (pending_control & 2) { pending_control &= ~2; // Should probably use data structure, but that may depend on byte ordering... setupdata[0] = (baudrate) & 0xff; // Setup baud rate 115200 - 0x1C200 setupdata[1] = (baudrate >> 8) & 0xff; setupdata[2] = (baudrate >> 16) & 0xff; setupdata[3] = (baudrate >> 24) & 0xff; setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16) print("CDCACM setup: "); print_hexbytes(&setupdata, 7); mk_setup(setup, 0x21, 0x20, 0, 0, 7); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; return; } // configure flow control if (pending_control & 4) { pending_control &= ~4; println("Control - 0x21,0x22, 0x3"); // Need to setup the data the line coding data mk_setup(setup, 0x21, 0x22, 3, 0, 0); queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } } //------------------------------------------------------------------------- // Now PL2303 - Which appears to be a little more complicated if (sertype == PL2303) { if (pending_control & 1) { // Still in larger setup state mode switch (setup_state) { case 1: println("PL2303: writeRegister(0x04, 0x00)"); mk_setup(setup, 0x40, 1, 0x0404, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 2; control_queued = true; return; case 2: println("PL2303: readRegister(0x04)"); mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; setup_state = 3; return; case 3: println("PL2303: v1 = readRegister(0x03)"); mk_setup(setup, 0xC0, 0x1, 0x8383, 0, 1); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; setup_state = 4; return; case 4: println("PL2303: readRegister(0x04)"); // Do we need this value long term or we could just leave in setup data? pl2303_v1 = setupdata[0]; // save the first bye of version mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; setup_state = 5; return; case 5: println("PL2303: writeRegister(0x04, 0x01)"); mk_setup(setup, 0x40, 1, 0x0404, 1, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 6; control_queued = true; return; case 6: println("PL2303: readRegister(0x04)"); mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; setup_state = 7; return; case 7: println("PL2303: v2 = readRegister(0x03)"); mk_setup(setup, 0xC0, 0x1, 0x8383, 0, 1); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; setup_state = 8; return; case 8: pl2303_v2 = setupdata[0]; // save the first bye of version print(" PL2303 Version ", pl2303_v1, HEX); println(":", pl2303_v2, HEX); println("PL2303: writeRegister(0, 1)"); mk_setup(setup, 0x40, 1, 0, 1, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 9; control_queued = true; return; case 9: println("PL2303: writeRegister(1, 0)"); mk_setup(setup, 0x40, 1, 1, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 10; control_queued = true; return; case 10: println("PL2303: writeRegister(2, 44)"); mk_setup(setup, 0x40, 1, 2, 0x44, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 11; control_queued = true; return; case 11: println("PL2303: writeRegister(8, 0)"); mk_setup(setup, 0x40, 1, 8, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 12; control_queued = true; return; case 12: println("PL2303: writeRegister(9, 0)"); mk_setup(setup, 0x40, 1, 9, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); setup_state = 13; control_queued = true; return; case 13: println("PL2303: Read current Baud/control"); mk_setup(setup, 0xA1, 0x21, 0, 0, 7); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; break; } pending_control &= ~1; // We are finally going to leave this list and join the rest if (control_queued) return; } // set baud rate if (pending_control & 2) { pending_control &= ~2; // See what the read returned earlier print("PL2303: Returned configuration data: "); print_hexbytes(setupdata, 7); // Should probably use data structure, but that may depend on byte ordering... setupdata[0] = (baudrate) & 0xff; // Setup baud rate 115200 - 0x1C200 setupdata[1] = (baudrate >> 8) & 0xff; setupdata[2] = (baudrate >> 16) & 0xff; setupdata[3] = (baudrate >> 24) & 0xff; setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16) print("PL2303: Set baud/control: ", baudrate, HEX); print(" = "); print_hexbytes(&setupdata, 7); mk_setup(setup, 0x21, 0x20, 0, 0, 7); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; return; } if (pending_control & 4) { pending_control &= ~4; println("PL2303: writeRegister(0, 0)"); mk_setup(setup, 0x40, 1, 0, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } if (pending_control & 8) { pending_control &= ~8; println("PL2303: Read current Baud/control"); memset(setupdata, 0, sizeof(setupdata)); // clear it to see if we read it... mk_setup(setup, 0xA1, 0x21, 0, 0, 7); queue_Control_Transfer(device, &setup, setupdata, this); control_queued = true; } if (pending_control & 0x10) { pending_control &= ~0x10; print("PL2303: Returned configuration data: "); print_hexbytes(setupdata, 7); println("PL2303: 0x21, 0x22, 0x3"); mk_setup(setup, 0x21, 0x22, 3, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; return; } if (pending_control & 0x30) { pending_control &= ~0x30; println("PL2303: 0x21, 0x22, 0x3"); mk_setup(setup, 0x21, 0x22, 3, 0, 0); // queue_Control_Transfer(device, &setup, NULL, this); control_queued = true; } } } /************************************************************/ // Interrupt-based Data Movement /************************************************************/ void USBSerial::rx_callback(const Transfer_t *transfer) { if (!transfer->driver) return; ((USBSerial *)(transfer->driver))->rx_data(transfer); } void USBSerial::tx_callback(const Transfer_t *transfer) { if (!transfer->driver) return; ((USBSerial *)(transfer->driver))->tx_data(transfer); } void USBSerial::rx_data(const Transfer_t *transfer) { uint32_t len = transfer->length - ((transfer->qtd.token >> 16) & 0x7FFF); // first update rxstate bitmask, since buffer is no longer queued if (transfer->buffer == rx1) { rxstate &= 0xFE; } else if (transfer->buffer == rx2) { rxstate &= 0xFD; } // get start of data and actual length const uint8_t *p = (const uint8_t *)transfer->buffer; if (sertype == FTDI) { if (len >= 2) { p += 2; len -= 2; } else { len = 0; } } if (len > 0) { print("rx: "); print_hexbytes(p, len); } // Copy data from packet buffer to circular buffer. // Assume the buffer will always have space, since we // check before queuing the buffers uint32_t head = rxhead; uint32_t tail = rxtail; if (++head >= rxsize) head = 0; uint32_t avail; if (len > 0) { //print("head=", head); //print(", tail=", tail); avail = rxsize - head; //print(", avail=", avail); //println(", rxsize=", rxsize); if (avail > len) avail = len; memcpy(rxbuf + head, p, avail); if (len <= avail) { head += avail - 1; if (head >= rxsize) head = 0; } else { head = len - avail - 1; memcpy(rxbuf, p + avail, head + 1); } rxhead = head; } // TODO: can be this more efficient? We know from above which // buffer is no longer queued, so possible skip most of this work? rx_queue_packets(head, tail); } // re-queue packet buffer(s) if possible void USBSerial::rx_queue_packets(uint32_t head, uint32_t tail) { uint32_t avail; if (head >= tail) { avail = rxsize - 1 - head + tail; } else { avail = tail - head - 1; } uint32_t packetsize = rx2 - rx1; if (avail >= packetsize) { if ((rxstate & 0x01) == 0) { queue_Data_Transfer(rxpipe, rx1, packetsize, this); rxstate |= 0x01; } else if ((rxstate & 0x02) == 0) { queue_Data_Transfer(rxpipe, rx2, packetsize, this); rxstate |= 0x02; } if ((rxstate & 0x03) != 0x03 && avail >= packetsize * 2) { if ((rxstate & 0x01) == 0) { queue_Data_Transfer(rxpipe, rx1, packetsize, this); rxstate |= 0x01; } else if ((rxstate & 0x02) == 0) { queue_Data_Transfer(rxpipe, rx2, packetsize, this); rxstate |= 0x02; } } } } void USBSerial::tx_data(const Transfer_t *transfer) { uint32_t mask; uint8_t *p = (uint8_t *)transfer->buffer; if (p == tx1) { println("tx1:"); mask = 1; //txstate &= 0xFE; } else if (p == tx2) { println("tx2:"); mask = 2; //txstate &= 0xFD; } else { return; // should never happen } // check how much more data remains in the transmit buffer uint32_t head = txhead; uint32_t tail = txtail; uint32_t count; if (head >= tail) { count = head - tail; } else { count = txsize + head - tail; } uint32_t packetsize = tx2 - tx1; if (count < packetsize) { // not enough data in buffer to fill a full packet txstate &= ~mask; return; } // immediately transmit another full packet, if we have enough data println("TX:moar data!!!!"); if (++tail >= txsize) tail = 0; uint32_t n = txsize - tail; if (n > packetsize) n = packetsize; memcpy(p, txbuf + tail, n); if (n >= packetsize) { tail += n - 1; if (tail >= txsize) tail = 0; } else { uint32_t len = packetsize - n; memcpy(p + n, txbuf, len); tail = len - 1; } txtail = tail; queue_Data_Transfer(txpipe, p, packetsize, this); } void USBSerial::timer_event(USBDriverTimer *whichTimer) { println("txtimer"); uint32_t count; uint32_t head = txhead; uint32_t tail = txtail; if (pending_control) { // We are still doing setup postpone for awhile.. txtimer.start(1200); println(" Postpone: setup pending_control"); return; // no outgoing buffers available, try again later } if (head == tail) { println(" *** Empty ***"); return; // nothing to transmit } else if (head > tail) { count = head - tail; } else { count = txsize + head - tail; } uint8_t *p; if ((txstate & 0x01) == 0) { p = tx1; txstate |= 0x01; } else if ((txstate & 0x02) == 0) { p = tx2; txstate |= 0x02; } else { txtimer.start(1200); println(" *** No buffers ***"); return; // no outgoing buffers available, try again later } if (++tail >= txsize) tail = 0; uint32_t n = txsize - tail; if (n > count) n = count; memcpy(p, txbuf + tail, n); if (n >= count) { tail += n - 1; if (tail >= txsize) tail = 0; } else { uint32_t len = count - n; memcpy(p + n, txbuf, len); tail = len - 1; } txtail = tail; print(" TX data (", count); print(") "); print_hexbytes(p, count); queue_Data_Transfer(txpipe, p, count, this); } /************************************************************/ // User Functions - must disable USBHQ IRQ for EHCI access /************************************************************/ void USBSerial::begin(uint32_t baud, uint32_t format) { NVIC_DISABLE_IRQ(IRQ_USBHS); baudrate = baud; pending_control |= 2; if (!control_queued) control(NULL); NVIC_ENABLE_IRQ(IRQ_USBHS); } void USBSerial::end(void) { // TODO: lower DTR } int USBSerial::available(void) { if (!device) return 0; uint32_t head = rxhead; uint32_t tail = rxtail; if (head >= tail) return head - tail; return rxsize + head - tail; } int USBSerial::peek(void) { if (!device) return -1; uint32_t head = rxhead; uint32_t tail = rxtail; if (head == tail) return -1; if (++tail >= rxsize) tail = 0; return rxbuf[tail]; } int USBSerial::read(void) { if (!device) return -1; uint32_t head = rxhead; uint32_t tail = rxtail; if (head == tail) return -1; if (++tail >= rxsize) tail = 0; int c = rxbuf[tail]; rxtail = tail; if ((rxstate & 0x03) != 0x03) { NVIC_DISABLE_IRQ(IRQ_USBHS); rx_queue_packets(head, tail); NVIC_ENABLE_IRQ(IRQ_USBHS); } return c; } int USBSerial::availableForWrite() { if (!device) return 0; uint32_t head = txhead; uint32_t tail = txtail; if (head >= tail) return txsize - 1 - head + tail; return tail - head - 1; } size_t USBSerial::write(uint8_t c) { if (!device) return 0; uint32_t head = txhead; if (++head >= txsize) head = 0; while (txtail == head) { // wait... } txbuf[head] = c; txhead = head; //print("head=", head); //println(", tail=", txtail); // if full packet in buffer and tx packet ready, queue it NVIC_DISABLE_IRQ(IRQ_USBHS); uint32_t tail = txtail; if ((txstate & 0x03) != 0x03) { // at least one packet buffer is ready to transmit uint32_t count; if (head >= tail) { count = head - tail; } else { count = txsize + head - tail; } uint32_t packetsize = tx2 - tx1; if (count >= packetsize) { //println("txsize=", txsize); uint8_t *p; if ((txstate & 0x01) == 0) { p = tx1; txstate |= 0x01; } else /* if ((txstate & 0x02) == 0) */ { p = tx2; txstate |= 0x02; } // copy data to packet buffer if (++tail >= txsize) tail = 0; uint32_t n = txsize - tail; if (n > packetsize) n = packetsize; //print("memcpy, offset=", tail); //println(", len=", n); memcpy(p, txbuf + tail, n); if (n >= packetsize) { tail += n - 1; if (tail >= txsize) tail = 0; } else { //n = txsize - n; uint32_t len = packetsize - n; //println("memcpy, offset=0, len=", len); memcpy(p + n, txbuf, len); tail = len - 1; } txtail = tail; //println("queue tx packet, newtail=", tail); queue_Data_Transfer(txpipe, p, packetsize, this); NVIC_ENABLE_IRQ(IRQ_USBHS); return 1; } } // otherwise, set a latency timer to later transmit partial packet txtimer.stop(); txtimer.start(3500); NVIC_ENABLE_IRQ(IRQ_USBHS); return 1; }