Implement driver timers

USBHost.h

@@ -258,7 +258,7 @@ protected:
 
 	// When any of the USBDriverTimer objects a driver creates generates
 	// a timer event, this function is called.
-	virtual void timer(USBDriverTimer &whichTimer) { }
+	virtual void timer_event(USBDriverTimer *whichTimer) { }
 
 	// When a device disconnects from the USB, this function is called.
 	// The driver must free all resources it allocated and update any
@@ -291,6 +291,7 @@ public:
 	void start(uint32_t microseconds);
 	void *pointer;
 	uint32_t integer;
+	uint32_t started_micros; // testing only
 private:
 	USBDriver      *driver;
 	uint32_t       usec;
@@ -309,6 +310,7 @@ public:
 protected:
 	virtual bool claim(Device_t *device, int type, const uint8_t *descriptors, uint32_t len);
 	virtual void control(const Transfer_t *transfer);
+	virtual void timer_event(USBDriverTimer *whichTimer);
 	virtual void disconnect();
 	void poweron(uint32_t port);
 	void getstatus(uint32_t port);
@@ -320,6 +322,7 @@ protected:
 	void update_status();
 	USBDriverTimer mytimer;
 	USBDriverTimer othertimer;
+	USBDriverTimer mytimers[7];
 	setup_t setup;
 	uint8_t hub_desc[16];
 	uint8_t endpoint;

ehci.cpp

@@ -324,21 +324,35 @@ void USBHost::isr()
 	}
 	if (stat & USBHS_USBSTS_TI1) { // timer 1 - used for USBDriverTimer
 		println("timer1");
+		USBDriverTimer *timer = active_timers;
+		if (timer) {
+			USBDriverTimer *next = timer->next;
+			active_timers = next;
+			if (next) {
+				// more timers scheduled
+				next->prev = NULL;
+				USBHS_GPTIMER1LD = next->usec - 1;
+				USBHS_GPTIMER1CTL = USBHS_GPTIMERCTL_RST | USBHS_GPTIMERCTL_RUN;
+			}
+			// TODO: call multiple timers if 0 elapsed between them?
+			timer->driver->timer_event(timer); // call driver's timer()
+		}
 	}
 }
 
 void USBDriverTimer::start(uint32_t microseconds)
 {
-	Serial.print("start_timer, usec = ");
-	Serial.print(usec);
+	Serial.print("start_timer, us = ");
+	Serial.print(microseconds);
 	Serial.print(", driver = ");
 	Serial.print((uint32_t)driver, HEX);
 	Serial.print(", this = ");
 	Serial.println((uint32_t)this, HEX);
-#if 1
 	if (!driver) return;
 	if (microseconds < 100) return; // minimum timer duration
+	started_micros = micros();
 	if (active_timers == NULL) {
+		// schedule is empty, just add this timer
 		usec = microseconds;
 		next = NULL;
 		prev = NULL;
@@ -347,10 +361,47 @@ void USBDriverTimer::start(uint32_t microseconds)
 		USBHS_GPTIMER1CTL = USBHS_GPTIMERCTL_RST | USBHS_GPTIMERCTL_RUN;
 		return;
 	}
-#endif
-	// TODO, add to active_timers list
-	//uint32_t remain = USBHS_GPTIMER1CTL & 0xFFFFFF;
-
+	uint32_t remain = USBHS_GPTIMER1CTL & 0xFFFFFF;
+	Serial.print("remain = ");
+	Serial.println(remain);
+	if (microseconds < remain) {
+		// this timer event is before any on the schedule
+		__disable_irq();
+		USBHS_GPTIMER1CTL = 0;
+		USBHS_USBSTS = USBHS_USBSTS_TI1; // TODO: UPI & UAI safety?!
+		usec = microseconds;
+		next = active_timers;
+		prev = NULL;
+		active_timers->usec = remain - microseconds;
+		active_timers->prev = this;
+		active_timers = this;
+		USBHS_GPTIMER1LD = microseconds - 1;
+		USBHS_GPTIMER1CTL = USBHS_GPTIMERCTL_RST | USBHS_GPTIMERCTL_RUN;
+		__enable_irq();
+		return;
+	}
+	// add this timer to the schedule, somewhere after the first timer
+	microseconds -= remain;
+	USBDriverTimer *list = active_timers;
+	while (list->next) {
+		list = list->next;
+		if (microseconds < list->usec) {
+			// add timer into middle of list
+			list->usec -= microseconds;
+			usec = microseconds;
+			next = list;
+			prev = list->prev;
+			list->prev = this;
+			prev->next = this;
+			return;
+		}
+		microseconds -= list->usec;
+	}
+	// add timer to the end of the schedule
+	usec = microseconds;
+	next = NULL;
+	prev = list;
+	list->next = this;
 }
 
 
@@ -925,6 +976,7 @@ void USBHost::add_qh_to_periodic_schedule(Pipe_t *pipe)
 		}
 	}
 #endif
+#if 0
 	println("Periodic Schedule:");
 	for (uint32_t i=0; i < PERIODIC_LIST_SIZE; i++) {
 		if (i < 10) print(" ");
@@ -932,6 +984,7 @@ void USBHost::add_qh_to_periodic_schedule(Pipe_t *pipe)
 		print(": ");
 		print_qh_list((Pipe_t *)(periodictable[i] & 0xFFFFFFE0));
 	}
+#endif
 }
 
 
@@ -1046,35 +1099,3 @@ void USBHost::delete_Pipe(Pipe_t *pipe)
 }
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

hub.cpp

@@ -39,8 +39,14 @@ bool USBHub::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t
 
 	// timer testing  TODO: remove this later
 	mytimer.init(this);
+	mytimer.pointer = (void *)"This is mytimer";
 	mytimer.start(99129);
+	othertimer.pointer = (void *)"Hello, I'm othertimer";
 	othertimer.start(12345);
+	for (int i=0; i < 7; i++) {
+		mytimers[i].init(this);
+		//mytimers[i].start((i + 1) * 10000);
+	}
 
 	// check for HUB type
 	if (dev->bDeviceClass != 9 || dev->bDeviceSubClass != 0) return false;
@@ -84,6 +90,19 @@ bool USBHub::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t
 	return true;
 }
 
+void USBHub::timer_event(USBDriverTimer *timer)
+{
+	uint32_t us = micros() - timer->started_micros;
+	print("timer event (");
+	print(us);
+	print(" us): ");
+	print((char *)timer->pointer);
+	print(", this = ");
+	print((uint32_t)this, HEX);
+	println(", timer = ", (uint32_t)timer, HEX);
+}
+
+
 void USBHub::poweron(uint32_t port)
 {
 	mk_setup(setup, 0x23, 3, 8, port, 0);