moparisthebest/USBHost_t36
1
0
Fork 0
mirror of https://github.com/gdsports/USBHost_t36 synced 2024-11-24 10:02:15 -05:00
Code Issues Releases Wiki Activity

PL2303 support

Browse Source 
This commit should start to allow some Prolific PL2303 devices to work.
Tis device has a rather more complex initialization process than some
of the other devices.

I have tested this some with one device that I used to use to program
some older RS232 based boards plus talk to an SSC-32 device.
Test case is I am able to talk to SSC-32 and if I type in ver<cr>
It does properly return the version number.

The data I am seeing is pretty close to what
was documented in: https://gist.github.com/tommie/89011c5ac06553d5cdb8
as well as what the Linux driver outputs.

I also incorperated Frank's configuration options.
This commit is contained in:
Kurt Eckhardt 2017-10-28 12:57:02 -07:00
parent 6e1f0c379c
commit 704d511c81
5 changed files with 255 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
USBHost_t36.h
View File

@ -942,6 +942,9 @@ private:
volatile uint8_t rxstate;// bitmask: which receive packets are queued
volatile uint8_t txstate;
uint8_t pending_control;
uint8_t setup_state; // PL2303 - has several steps... Could use pending control?
uint8_t pl2303_v1; // Which version do we have
uint8_t pl2303_v2;
uint8_t interface;
bool control_queued;
enum { CDCACM, FTDI, PL2303, CH341 } sertype;

4
ehci.cpp
View File

@ -54,7 +54,11 @@
// slowest rate we can poll interrupt endpoints. Each entry uses
// 12 bytes (4 for a pointer, 8 for bandwidth management).
// Supported values: 8, 16, 32, 64, 128, 256, 512, 1024
#if defined(USBHS_PERIODIC_LIST_SIZE)
#define PERIODIC_LIST_SIZE (USBHS_PERIODIC_LIST_SIZE)
#else
#define PERIODIC_LIST_SIZE 32
#endif
// The EHCI periodic schedule, used for interrupt pipes/endpoints
static uint32_t periodictable[PERIODIC_LIST_SIZE] __attribute__ ((aligned(4096), used));

11
examples/SerialTest/SerialTest.ino
View File

@ -3,7 +3,7 @@
// This example is in the public domain
#include "USBHost_t36.h"
#define USBBAUD 115200
USBHost myusb;
USBHub hub1(myusb);
USBHub hub2(myusb);
@ -60,7 +60,10 @@ void loop()
// If this is a new Serial device.
if (drivers[i] == &userial) {
// Lets try first outputting something to our USerial to see if it will go out...
userial.begin(1000000);
userial.begin(USBBAUD);
// delay(5);
// userial.println("ver");
#if 0
userial.println("abcdefghijklmnopqrstuvwxyz");
userial.println("ABCDEFGHIJKLMNOPQURSTUVWYZ");
@ -79,8 +82,9 @@ void loop()
}
}
while (Serial.available()) {
if (Serial.available()) {
Serial.println("Serial Available");
while (Serial.available()) {
int ch = Serial.read();
if (ch == '$') {
BioloidTest();
@ -88,6 +92,7 @@ void loop()
}
else userial.write(ch);
}
}
while (Serial1.available()) {
// Serial.println("Serial1 Available");

4
keyboard.cpp
View File

@ -128,7 +128,11 @@ bool KeyboardController::claim(Device_t *dev, int type, const uint8_t *descripto
if (size != 8) {
return false; // must be 8 bytes for Keyboard Boot Protocol
}
#ifdef USBHS_KEYBOARD_INTERVAL
uint32_t interval = USBHS_KEYBOARD_INTERVAL;
#else
uint32_t interval = descriptors[24];
#endif
println("polling interval = ", interval);
datapipe = new_Pipe(dev, 3, endpoint, 1, 8, interval);
datapipe->callback_function = callback;

231
serial.cpp
View File

@ -225,7 +225,8 @@ bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint3
pending_control = 0x0; // Maybe don't need to do...
return true;
}
#if 0
#if 1
// BUGBUG: Note: there are probably more vendor/product pairs.. Maybe should create table of them
if (dev->idVendor == 0x67B && dev->idProduct == 0x2303) {
// Prolific Technology, Inc. PL2303 Serial Port
println("len = ", len);
@ -241,7 +242,7 @@ bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint3
//09 04 00 00 03 FF 00 00 00 07 05 81 03 0A 00 01 07 05 02 02 40 00 00 07 05 83 02 40 00 00
uint32_t rxep = 0;
uint32_t txep = 0;
uint16_t descriptor_index = 9;
uint32_t descriptor_index = 9;
while (count_end_points-- && ((rxep == 0) || txep == 0)) {
if (descriptors[descriptor_index] != 7) return false; // length 7
if (descriptors[descriptor_index+1] != 5) return false; // ep desc
@ -269,6 +270,7 @@ bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint3
// TODO: free rxpipe
return false;
}
sertype = PL2303;
rxpipe->callback_function = rx_callback;
queue_Data_Transfer(rxpipe, rx1, 64, this);
@ -280,10 +282,15 @@ bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint3
txstate = 0;
txpipe->callback_function = tx_callback;
baudrate = 115200;
pending_control = 0x0F;
mk_setup(setup, 0x40, 0, 0, 0, 0); // reset port
queue_Control_Transfer(dev, &setup, NULL, this);
// Lets see if it will handle the same CDCACM - messages?
println("PL2303: readRegister(0x04)");
// Need to setup the data the line coding data
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(dev, &setup, setupdata, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0x3f; // Maybe don't need to do...
return true;
}
#endif
@ -417,9 +424,14 @@ void USBSerial::control(const Transfer_t *transfer)
println("control callback (serial) ", pending_control, HEX);
control_queued = false;
// set data format
// We will split this up by Serial type, maybe different functions?
//-------------------------------------------------------------------------
// First FTDI
if (sertype == FTDI) {
if (pending_control & 1) {
pending_control &= ~1;
// set data format
mk_setup(setup, 0x40, 4, 8, 0, 0); // data format 8N1
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
@ -428,13 +440,36 @@ void USBSerial::control(const Transfer_t *transfer)
// set baud rate
if (pending_control & 2) {
pending_control &= ~2;
if (sertype == FTDI) {
uint32_t baudval = 3000000 / baudrate;
mk_setup(setup, 0x40, 3, baudval, 0, 0);
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
// configure flow control
if (pending_control & 4) {
pending_control &= ~4;
mk_setup(setup, 0x40, 2, 0, 1, 0);
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
// set DTR
if (pending_control & 8) {
pending_control &= ~8;
mk_setup(setup, 0x40, 1, 0x0101, 0, 0);
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
} else if (sertype == CDCACM) {
}
//-------------------------------------------------------------------------
// Now CDCACM
if (sertype == CDCACM) {
if (pending_control & 2) {
pending_control &= ~2;
// Should probably use data structure, but that may depend on byte ordering...
setupdata[0] = (baudrate) & 0xff; // Setup baud rate 115200 - 0x1C200
setupdata[1] = (baudrate >> 8) & 0xff;
@ -448,35 +483,184 @@ void USBSerial::control(const Transfer_t *transfer)
mk_setup(setup, 0x21, 0x20, 0, 0, 7);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
}
return;
}
// configure flow control
if (pending_control & 4) {
pending_control &= ~4;
if (sertype == FTDI) {
mk_setup(setup, 0x40, 2, 0, 1, 0);
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
} else if (sertype == CDCACM) {
println("Control - CDCACM DTR...");
println("Control - 0x21,0x22, 0x3");
// Need to setup the data the line coding data
mk_setup(setup, 0x21, 0x22, 1, interface, 0);
mk_setup(setup, 0x21, 0x22, 3, 0, 0);
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
}
//-------------------------------------------------------------------------
// Now PL2303 - Which appears to be a little more complicated
if (sertype == PL2303) {
if (pending_control & 1) {
// Still in larger setup state mode
switch (setup_state) {
case 1:
println("PL2303: writeRegister(0x04, 0x00)");
mk_setup(setup, 0x40, 1, 0x0404, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 2;
control_queued = true;
return;
case 2:
println("PL2303: readRegister(0x04)");
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
setup_state = 3;
return;
case 3:
println("PL2303: v1 = readRegister(0x03)");
mk_setup(setup, 0xC0, 0x1, 0x8383, 0, 1);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
setup_state = 4;
return;
case 4:
println("PL2303: readRegister(0x04)");
// Do we need this value long term or we could just leave in setup data?
pl2303_v1 = setupdata[0]; // save the first bye of version
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
setup_state = 5;
return;
case 5:
println("PL2303: writeRegister(0x04, 0x01)");
mk_setup(setup, 0x40, 1, 0x0404, 1, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 6;
control_queued = true;
return;
case 6:
println("PL2303: readRegister(0x04)");
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
setup_state = 7;
return;
case 7:
println("PL2303: v2 = readRegister(0x03)");
mk_setup(setup, 0xC0, 0x1, 0x8383, 0, 1);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
setup_state = 8;
return;
case 8:
pl2303_v2 = setupdata[0]; // save the first bye of version
print(" PL2303 Version ", pl2303_v1, HEX);
println(":", pl2303_v2, HEX);
println("PL2303: writeRegister(0, 1)");
mk_setup(setup, 0x40, 1, 0, 1, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 9;
control_queued = true;
return;
case 9:
println("PL2303: writeRegister(1, 0)");
mk_setup(setup, 0x40, 1, 1, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 10;
control_queued = true;
return;
case 10:
println("PL2303: writeRegister(2, 44)");
mk_setup(setup, 0x40, 1, 2, 0x44, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 11;
control_queued = true;
return;
case 11:
println("PL2303: writeRegister(8, 0)");
mk_setup(setup, 0x40, 1, 8, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 12;
control_queued = true;
return;
case 12:
println("PL2303: writeRegister(9, 0)");
mk_setup(setup, 0x40, 1, 9, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
setup_state = 13;
control_queued = true;
return;
case 13:
println("PL2303: Read current Baud/control");
mk_setup(setup, 0xA1, 0x21, 0, 0, 7);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
break;
}
pending_control &= ~1; // We are finally going to leave this list and join the rest
if (control_queued) return;
}
// set baud rate
if (pending_control & 2) {
pending_control &= ~2;
// See what the read returned earlier
print("PL2303: Returned configuration data: ");
print_hexbytes(setupdata, 7);
// Should probably use data structure, but that may depend on byte ordering...
setupdata[0] = (baudrate) & 0xff; // Setup baud rate 115200 - 0x1C200
setupdata[1] = (baudrate >> 8) & 0xff;
setupdata[2] = (baudrate >> 16) & 0xff;
setupdata[3] = (baudrate >> 24) & 0xff;
setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits
setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space
setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16)
print("PL2303: Set baud/control: ", baudrate, HEX);
print(" = ");
print_hexbytes(&setupdata, 7);
mk_setup(setup, 0x21, 0x20, 0, 0, 7);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
return;
}
// set DTR
if (pending_control & 8) {
pending_control &= ~8;
mk_setup(setup, 0x40, 1, 0x0101, 0, 0);
if (pending_control & 4) {
pending_control &= ~4;
println("PL2303: writeRegister(0, 0)");
mk_setup(setup, 0x40, 1, 0, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
if (pending_control & 8) {
pending_control &= ~8;
println("PL2303: Read current Baud/control");
memset(setupdata, 0, sizeof(setupdata)); // clear it to see if we read it...
mk_setup(setup, 0xA1, 0x21, 0, 0, 7);
queue_Control_Transfer(device, &setup, setupdata, this);
control_queued = true;
}
if (pending_control & 0x10) {
pending_control &= ~0x10;
print("PL2303: Returned configuration data: ");
print_hexbytes(setupdata, 7);
println("PL2303: 0x21, 0x22, 0x3");
mk_setup(setup, 0x21, 0x22, 3, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
return;
}
if (pending_control & 0x30) {
pending_control &= ~0x30;
println("PL2303: 0x21, 0x22, 0x3");
mk_setup(setup, 0x21, 0x22, 3, 0, 0); //
queue_Control_Transfer(device, &setup, NULL, this);
control_queued = true;
}
}
}
@ -496,6 +680,7 @@ void USBSerial::tx_callback(const Transfer_t *transfer)
((USBSerial *)(transfer->driver))->tx_data(transfer);
}
void USBSerial::rx_data(const Transfer_t *transfer)
{
uint32_t len = transfer->length - ((transfer->qtd.token >> 16) & 0x7FFF);
@ -634,6 +819,12 @@ void USBSerial::timer_event(USBDriverTimer *whichTimer)
uint32_t count;
uint32_t head = txhead;
uint32_t tail = txtail;
if (pending_control) {
// We are still doing setup postpone for awhile..
txtimer.start(1200);
println(" Postpone: setup pending_control");
return; // no outgoing buffers available, try again later
}
if (head == tail) {
println(" *** Empty ***");
return; // nothing to transmit