\documentclass[a4paper]{report}
\usepackage{amsmath}
\usepackage{color}

\begin{document}
\title{Mufasa PascalScript Handbook}
\author{Merlijn Wajer \and Raymond van Veneti\"{e}}

\definecolor{typeGreen}{rgb}{0.0, 0.6, 0.0}
\definecolor{typeRed}{rgb}{0.6, 0.0, 0.0}

% Few defines to make methods easier.
% Most func/proc  definitions still don't use this...
\def\pproc{\textbf{procedure}}
\def\pfunc{\textbf{function}}
\newcommand{\pvtype}[1]{{\color{typeGreen}{#1}};}
\newcommand{\pvtypel}[1]{{\color{typeGreen}{#1}};}
\newcommand{\pvname}[1]{{\color{typeRed}{#1}}:}
\newcommand{\mname}[1]{{\color{blue}{#1}}}


\maketitle
\tableofcontents

\chapter{Foreword}

This document provides a simple but helpful explanation on every function that
the Mufasa macro library exports to it's Interpreter, PS\footnote{Pascal
Script}. For a real in depth explanation, the Mufasa Handbook would be a better
place to look.

\chapter{Exceptions}

\section{Motivation}
Mufasa takes debugging to a new level by using exceptions for error handling,
this allows you to even catch possible errors in your script, thus allowing
the script to continue it's exection. We strongly believe Exceptions are the
way to go. They were implemented for a reason.

\section{When do we throw Exceptions}

There are a lot of occasions where Mufasa may throw exceptions.

Consider the following program:

\begin{verbatim}
program new;
var
  bmp:integer;
  x, y:integer;
begin
  bmp:=bitmapfromstring(200, 200, '');
  x := -1;
  y := -1;
  fastsetpixel(bmp, x, y, clwhite);
end.
\end{verbatim}

Now, when we execute this with MML, we get this:

\begin{verbatim}
Error: Exception: You are accessing an invalid point, (-1,-1) at bitmap[0] at line 8
\end{verbatim}

Further expanding the example:
\begin{verbatim}
program new;
var
  bmp:integer;
  x, y:integer;
begin
  bmp:=bitmapfromstring(200, 200, '');
  x := -1;
  y := -1;
  try
  	fastsetpixel(bmp, x, y, clwhite);
  except
  	writeln('We failed to do a setpixel with x = ' + inttostr(x) + 
			', y = ' + inttostr(y));
  end;
end.

\end{verbatim}

Results in:

\begin{verbatim}
Compiled succesfully in 8 ms.
We failed to do a setpixel with x = .-1, y = -1
Succesfully executed
\end{verbatim}

\subsection{Going beyond script debugging}
Exceptions are even in the very core of Mufasa. This greatly improves
debugging in general, as we will also be able to easily spot errors in Mufasa.
When they occured, what the values of the variables were, et cetera.

Let's look at a function known as ReturnData(), which returns the client data.
It for example checks if the points that are passed are consistent.
If they are not, an Exception is thrown. If Mufasa does not catch that 
particular Exception\footnote{Which it doesn't, as a feature.}, then it will
be thrown in your script. This will indicate that somehow ReturnData got
invalid coordinates. Usually this Exception is not throw, as other functions
also check their input for sanity, and then it is possible to throw a more
detailed exception.

\subsection{How to Handle Exceptions}

An exception is handled with a \textbf{try} ... \textbf{except}
... \textbf{finally} statement.
See the example in the previous section for more details.

\chapter{Input}

\section{Mouse}

\subsection{Types}

A few variables are exported for working with Mufasa Mouse Functions.

TClickType, which defines the click type.
\begin{itemize}
	\item \textbf{mouse\_Right} = 0
	\item \textbf{mouse\_Left} = 1
	\item \textbf{mouse\_Middle} = 2
\end{itemize}

TMousePress, which defines if the mouse button is to be down or up.
\begin{itemize}
	\item \textbf{mouse\_Up}
	\item \textbf{mouse\_Down}
\end{itemize}

%  TClickType = (mouse_Left, mouse_Right, mouse_Middle);
%  TMousePress = (mouse_Down, mouse_Up);                

\subsection{MoveMouse}
\textbf{procedure} {\color{blue}{MoveMouse}}({\color{typeRed}
{in x, y: }}{\color{typeGreen}{Integer}});

MoveMouse moves the mouse pointer to the specified x and y coordinates.

\subsection{GetMousePos}
\textbf{procedure} {\color{blue}{GetMousePos}}({\color{typeRed}
{out x, y: }}{\color{typeGreen}{Integer}});

GetMousePos returns the current position of the mouse in \textbf{x} and
\textbf{y}.

\subsection{HoldMouse}
\pproc \mname{HoldMouse}(\pvname{x, y} \pvtype{Integer} \pvname{clickType}
\pvtypel{TClickType})

HoldMouse holds the given mouse button (clickType) down at the specified \textbf{x}, \textbf{y} 
coordinate. If the mouse if not at the given \textbf{x}, \textbf{y} yet, the mouse position
will be set to \textbf{x}, \textbf{y}.

\subsection{ReleaseMouse}
\textbf{procedure} {\color{blue}{ReleaseMouse}}({\color{typeRed}
{x, y: }}{\color{typeGreen}{Integer}}; {\color{typeRed}{clickType :}}
{\color{typeGreen}{TClickType}});

ReleaseMouse releases the given mouse button (clickType) at the specified \textbf{x}, \textbf{y} 
coordinate. If the mouse if not at the given \textbf{x}, \textbf{y} yet, the mouse position
will be set to \textbf{x}, \textbf{y}.

\subsection{ClickMouse}
\textbf{procedure} {\color{blue}{ClickMouse}}({\color{typeRed}
{x, y: }}{\color{typeGreen}{Integer}}; {\color{typeRed}{clickType :}}
{\color{typeGreen}{TClickType}});

ClickMouse performs a click with the given mouse button (clickType) at the
specified x, y coordinate.

\section{Keyboard}

The Keyboard functions in Mufasa are listed here.
Most of them are quite basic and can use some improvement.

\subsection{Types}

Most of the low level Keyboard functions use Virtual Keys.

\subsection{Virtual Keys}

Virtual Keys originate from MS Windows, and we've added support for them.
Virtual Keys also work on non-Windows operating systems.

\begin{itemize}
\item   UNKNOWN: 0
\item   LBUTTON: 1
\item   RBUTTON: 2
\item   CANCEL: 3
\item   MBUTTON: 4
\item   XBUTTON1: 5
\item   XBUTTON2: 6
\item   BACK: 8
\item   TAB: 9
\item   CLEAR: 12
\item   RETURN: 13
\item   SHIFT: 16
\item   CONTROL: 17
\item   MENU: 18
\item   PAUSE: 19
\item   CAPITAL: 20
\item   KANA: 21
\item   HANGUL: 21
\item   JUNJA: 23
\item   FINAL: 24
\item   HANJA: 25
\item   KANJI: 25
\item   ESCAPE: 27
\item   CONVERT: 28
\item   NONCONVERT: 29
\item   ACCEPT: 30
\item   MODECHANGE: 31
\item   SPACE: 32
\item   PRIOR: 33
\item   NEXT: 34
\item   END: 35
\item   HOME: 36
\item   LEFT: 37
\item   UP: 38
\item   RIGHT: 39
\item   DOWN: 40
\item   SELECT: 41
\item   PRINT: 42
\item   EXECUTE: 43
\item   SNAPSHOT: 44
\item   INSERT: 45
\item   DELETE: 46
\item   HELP: 47
\item   0: \$30
\item   1: \$31
\item   2: \$32
\item   3: \$33
\item   4: \$34
\item   5: \$35
\item   6: \$36
\item   7: \$37
\item   8: \$38
\item   9: \$39
\item   A: \$41
\item   B: \$42
\item   C: \$43
\item   D: \$44
\item   E: \$45
\item   F: \$46
\item   G: \$47
\item   H: \$48
\item   I: \$49
\item   J: \$4A
\item   K: \$4B
\item   L: \$4C
\item   M: \$4D
\item   N: \$4E
\item   O: \$4F
\item   P: \$50
\item   Q: \$51
\item   R: \$52
\item   S: \$53
\item   T: \$54
\item   U: \$55
\item   V: \$56
\item   W: \$57
\item   X: \$58
\item   Y: \$59
\item   Z: \$5A
\item   LWIN: \$5B
\item   RWIN: \$5C
\item   APPS: \$5D
\item   SLEEP: \$5F
\item   NUMPAD0: 96
\item   NUMPAD1: 97
\item   NUMPAD2: 98
\item   NUMPAD3: 99
\item   NUMPAD4: 100
\item   NUMPAD5: 101
\item   NUMPAD6: 102
\item   NUMPAD7: 103
\item   NUMPAD8: 104
\item   NUMPAD9: 105
\item   MULTIPLY: 106
\item   ADD: 107
\item   SEPARATOR: 108
\item   SUBTRACT: 109
\item   DECIMAL: 110
\item   DIVIDE: 111
\item   F1: 112
\item   F2: 113
\item   F3: 114
\item   F4: 115
\item   F5: 116
\item   F6: 117
\item   F7: 118
\item   F8: 119
\item   F9: 120
\item   F10: 121
\item   F11: 122
\item   F12: 123
\item   F13: 124
\item   F14: 125
\item   F15: 126
\item   F16: 127
\item   F17: 128
\item   F18: 129
\item   F19: 130
\item   F20: 131
\item   F21: 132
\item   F22: 133
\item   F23: 134
\item   F24: 135
\item   NUMLOCK: \$90
\item   SCROLL: \$91
\item   LSHIFT: \$A0
\item   RSHIFT: \$A1
\item   LCONTROL: \$A2
\item   RCONTROL: \$A3
\item   LMENU: \$A4
\item   RMENU: \$A5
\item   BROWSER\_BACK: \$A6
\item   BROWSER\_FORWARD: \$A7
\item   BROWSER\_REFRESH: \$A8
\item   BROWSER\_STOP: \$A9
\item   BROWSER\_SEARCH: \$AA
\item   BROWSER\_FAVORITES: \$AB
\item   BROWSER\_HOME: \$AC
\item   VOLUME\_MUTE: \$AD
\item   VOLUME\_DOWN: \$AE
\item   VOLUME\_UP: \$AF
\item   MEDIA\_NEXT\_TRACK: \$B0
\item   MEDIA\_PREV\_TRACK: \$B1
\item   MEDIA\_STOP: \$B2
\item   MEDIA\_PLAY\_PAUSE: \$B3
\item   LAUNCH\_MAIL: \$B4
\item   LAUNCH\_MEDIA\_SELECT: \$B5
\item   LAUNCH\_APP1: \$B6
\item   LAUNCH\_APP2: \$B7
\item   OEM\_1: \$BA
\item   OEM\_PLUS: \$BB
\item   OEM\_COMMA: \$BC
\item   OEM\_MINUS: \$BD
\item   OEM\_PERIOD: \$BE
\item   OEM\_2: \$BF
\item   OEM\_3: \$C0
\item   OEM\_4: \$DB
\item   OEM\_5: \$DC
\item   OEM\_6: \$DD
\item   OEM\_7: \$DE
\item   OEM\_8: \$DF
\item   OEM\_102: \$E2
\item   PROCESSKEY: \$E7
\item   ATTN: \$F6
\item   CRSEL: \$F7
\item   EXSEL: \$F8
\item   EREOF: \$F9
\item   PLAY: \$FA
\item   ZOOM: \$FB
\item   NONAME: \$FC
\item   PA1: \$FD
\item   OEM\_CLEAR: \$FE
\item   HIGHESTVALUE: \$FE
\item   UNDEFINED: \$FF
\end{itemize}

\subsection{KeyDown}

\textbf{procedure} {\color{blue}{KeyDown}}({\color{typeRed}
{key: }}{\color{typeGreen}{Word}});

KeyDown sends a request to the Operating System to ``fake'' an event that
causes the Key to be ``down''.
\textbf{key} can be any Virtual Key\footnote{See the section on Virtual Keys}.

\subsubsection{Common pitfalls}

Don't forget that certain keys may require that shift, or another key,
is down as well.

\subsection{KeyUp}
\textbf{procedure} {\color{blue}{KeyUp}}({\color{typeRed}
{key: }}{\color{typeGreen}{Word}});

KeyUp sends a request to the Operating System to ``fake'' an event that
causes the Key to be ``up''.
\textbf{key} can be any Virtual Key.

\subsection{PressKey}

\textbf{procedure} {\color{blue}{PressKey}}({\color{typeRed}
{key: }}{\color{typeGreen}{Word}});

PressKey combines KeyDown and KeyUp, to fake a key press.

\subsection{SendKeys}

\textbf{procedure} {\color{blue}{SendKEys}}({\color{typeRed}
{s: }}{\color{typeGreen}{String}});

SendKeys takes a string \textbf{s}, and attempts to send it's complete contents to
the client. It currently only accepts characters ranging from ``A..z''.

\subsection{IsKeyDown}
\textbf{function} {\color{blue}{PressKey}}({\color{typeRed}
{key: }}{\color{typeGreen}{Word}}): {\color{typeGreen}{Boolean}};

IsKeyDown returns true if the given VK key is ``down''.

\subsection{Notes}

There is no IsKeyUp, because this can easily be generated by inverting the
result of IsKeyDown:
\begin{verbatim}
    not IsKeyDown (x)
\end{verbatim}


\chapter{Finding Routines}

\section{Colours}

\subsection{FindColor}

\textbf{function} {\color{blue}{FindColor}}({\color{typeRed}
{var x, y: }}{\color{typeGreen}{Integer}}; {\color{typeRed}
{col, x1, y1, x2, y2: }}{\color{typeGreen}{Integer}}): {\color{typeGreen}{Boolean}};

FindColor returns true if the exact color given (col) is found in the box defined by x1, y1, x2, y2.
The point is returned in x and y. It searches from the top left to the bottom right and will stop
after matching a point.

\subsection{FindColorTolerance}

\textbf{function} {\color{blue}{FindColorTolerance}}({\color{typeRed}
{var x, y: }}{\color{typeGreen}{Integer}}; {\color{typeRed}
{col, x1, y1, x2, y2, tol: }}{\color{typeGreen}{Integer}}): {\color{typeGreen}{Boolean}};

FindColorTolerance returns true if a colour within the given tolerance range (tol) of the given color (col)
is found in the box defined by x1, y1, x2, y2. Only the first point is returned in x and y.
Whether or not a color is within the tolerance range is determined by the CTS mode.
It searches from the top left to the bottom right and will stop after matching a point.

\subsection{FindColorsTolerance}

\textbf{function} {\color{blue}{FindColorsTolerance}}({\color{typeRed}
{var pts: }}{\color{typeGreen}{TPointArray}}; {\color{typeRed}
{col, x1, y1, x2, y2, tol: }}{\color{typeGreen}{Integer}}): {\color{typeGreen}{Boolean}};

FindColorsTolerance returns true if at least one point was found. A point is found if it is within the
given tolerance range (tol) of the given color (col) and inside the box defined by x1, y1, x2, y2.
Whether or not a color is within the tolerance range is determined by the CTS mode.
It searches from the top left to the bottom right and will find all matching points in the area.

\section{Bitmaps}

% Dit doe je zelf maar

\section{DTMs}

Deformable Template Models are a special approach to finding
objects. One can specify several points, colours and tolerances
for these points.

\subsection{Types}

Mufasa's DTM type:

\begin{verbatim}
  pDTM = packed record
    l: Integer; // length
    p: TPointArray; // points
    c, t, asz, ash: TIntegerArray; // colours, tolerance, areasize/shape
    bp: Array Of Boolean; // Bad Point ( = Not Point )
    n: String; // Name
  end;              
\end{verbatim}

Deprecated DTM type:

\begin{verbatim}
  TDTMPointDef = record
    x, y, Color, Tolerance, AreaSize, AreaShape: integer;
  end;

  TDTMPointDefArray = Array Of TDTMPointDef;

  TDTM = record
    MainPoint: TDTMPointDef;
    SubPoints: TDTMPointDefArray;
  end;    
\end{verbatim}

\subsection{FindDTM}


\pfunc \mname{FindDTM}(\pvname{DTM: }\pvtype{Integer} \textbf{var}
\pvname{x, y} \pvtype{Integer} \pvname{x1, y1, x2, y2} \pvtypel{Integer}):
\pvtype{Boolean}

FindDTM is the most basic DTM finding function. It takes a box to search in,
defined by x1, y1, x2, y2; and if the DTM is found, it will set \textbf{x} and 
\textbf{y} to the coordinate the DTM was found at and it will also return true. 
Else, it returns false. Once a DTM is found, it will stop searching. In other words; it always returns
the first found DTM.

\subsection{FindDTMs}

\pfunc \mname{FindDTMs}(\pvname{DTM}\pvtype{Integer} \pvname{Points}
\pvtype{TPointArray} \pvname{x1, y1, x2, y2} \pvtypel{Integer}):
\pvtype{Boolean}

FindDTMs is like FindDTM, but it returns an array of \textbf{x} and \textbf{y}, as the
\textbf{TPointArray} type.

\subsection{FindDTMRotated}
\pfunc \mname{FindDTMRotated}(\pvname{DTM}\pvtype{Integer} \textbf{var}
\pvname{x, y} \pvtype{Integer} \pvname{x1, y1, x2, y2} \pvtype{Integer}
\pvname{sAngle, eAngle, aStep} \pvtype{Extended} \textbf{var}
\pvname{aFound} \pvtypel{Extended}): \pvtype{Boolean}

FindDTMRotated is behaves like FindDTM. Only, it will turn the DTM between 
sAngle and eAngle by aStep each time. It will also return the angle which the DTM was found
at.

\subsection{FindDTMsRotated}
\pfunc \mname{FindDTMRotated}(\pvname{DTM}\pvtype{Integer} \textbf{var}
\pvname{Points} \pvtype{TPointArray} \pvname{x1, y1, x2, y2} \pvtype{Integer}
\pvname{sAngle, eAngle, aStep} \pvtype{Extended} \textbf{var}
\pvname{aFound} \pvtypel{T2DExtendedArray}): \pvtype{Boolean}

FindDTMRotated is behaves like FindDTMs. Only, it will turn the DTM between 
sAngle and eAngle by aStep each time. It will also return the angles which each DTM Main Point 
was found at.

\subsection{DTMFromString}

\subsection{DTMToString}

\subsection{AddDTM}

\subsection{FreeDTM}

\subsection{GetDTM}

\subsection{tDTMtopDTM}

\subsection{pDTMtopDTM}


\chapter{OCR}

\section{Finding text}

\section{Identifying text}

\subsection{GetTextAt}

GetTextAt returns the text at the given X, Y.
minvspacing and maxvspacing define the minimum and maximum vertical spacing
between characters in the font, hspacing is the minimal space to split
characters on. If it is, for example, 0, and ``i'' will be split into two
characters.

%TODO: colours
\begin{verbatim}
function GetTextAt(atX, atY, minvspacing, maxvspacing, hspacing, color, tol, len: integer; font: string): string;  
\end{verbatim}

\chapter{Clients}

\section{Window}
Simba can target running applicationsa/applets on your computer. 
You simply use the crosshair to select the client, and it will then read and
send all its data from and to that application. Simba has also split up its
``Key and Mouse'' input and its ``Data Target``, which means you can send
mouse events to one window, while reading data from another.

\section{Bitmaps and other Raw Data}

Simba can also target data that is loaded in memory. Arrays, bitmaps and data
pointers. Obviously if you load any of these with Simba any mouse and key
events will not be send to that target, as it has no means of communicating
with your devices. Most likely mouse and key events will still be send to the
previous target.

% Complete TODO.
\section{Functions provided}

\subsection{GetClientDimensions}

\subsection{ActivateClient}

\subsection{IsTargetValid}

\subsection{SetTargetBitmap}

\subsection{SetImageTarget}

\subsection{SetTargetArray}

\subsection{SetEIOSTarget}

\subsection{SetKeyMouseTarget}

\subsection{GetImageTarget}

\subsection{GetKeyMouseTarget}

\subsection{FreeTarget}

\section{Freeze and UnFreeze}

% Files
\chapter{Files and Web}

\section{Files}

Files are used to load and save data to the hard drive.
Simba provides several functions to access files - that is, read
from them and write to them.


\subsection{CreateFile}
\subsection{OpenFile}
\subsection{RewriteFile}
\subsection{CloseFile}
\subsection{EndOfFile}
\subsection{FileSize}
\subsection{ReadFileString}
\subsection{WriteFileString}
\subsection{SetFileCharPointer}
\subsection{FilePointerPos}
\subsection{DirectoryExists}
\subsection{FileExists}
\subsection{WriteINI}
\subsection{ReadINI}
\subsection{DeleteINI}

\section{Web}

\subsection{OpenWebPage}

\chapter{Point Sorting and Math}
\section{Sorting functions}
Wizzyplugin stuff

\section{Math}

\chapter{Easter Eggs}
\section{Easter egg 1}
Nothing here! Do you really think we document Easter eggs?
????

Hakuna matata!




\end{document}