You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
392 lines
11 KiB
392 lines
11 KiB
/* Name: usbdrvasm.S |
|
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers |
|
* Author: Christian Starkjohann |
|
* Creation Date: 2007-06-13 |
|
* Tabsize: 4 |
|
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH |
|
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) |
|
*/ |
|
|
|
/* |
|
General Description: |
|
This module is the assembler part of the USB driver. This file contains |
|
general code (preprocessor acrobatics and CRC computation) and then includes |
|
the file appropriate for the given clock rate. |
|
*/ |
|
|
|
#define __SFR_OFFSET 0 /* used by avr-libc's register definitions */ |
|
#include "usbportability.h" |
|
#include "usbdrv.h" /* for common defs */ |
|
|
|
/* register names */ |
|
#define x1 r16 |
|
#define x2 r17 |
|
#define shift r18 |
|
#define cnt r19 |
|
#define x3 r20 |
|
#define x4 r21 |
|
#define x5 r22 |
|
#define bitcnt x5 |
|
#define phase x4 |
|
#define leap x4 |
|
|
|
/* Some assembler dependent definitions and declarations: */ |
|
|
|
#ifdef __IAR_SYSTEMS_ASM__ |
|
extern usbRxBuf, usbDeviceAddr, usbNewDeviceAddr, usbInputBufOffset |
|
extern usbCurrentTok, usbRxLen, usbRxToken, usbTxLen |
|
extern usbTxBuf, usbTxStatus1, usbTxStatus3 |
|
# if USB_COUNT_SOF |
|
extern usbSofCount |
|
# endif |
|
public usbCrc16 |
|
public usbCrc16Append |
|
|
|
COMMON INTVEC |
|
# ifndef USB_INTR_VECTOR |
|
ORG INT0_vect |
|
# else /* USB_INTR_VECTOR */ |
|
ORG USB_INTR_VECTOR |
|
# undef USB_INTR_VECTOR |
|
# endif /* USB_INTR_VECTOR */ |
|
# define USB_INTR_VECTOR usbInterruptHandler |
|
rjmp USB_INTR_VECTOR |
|
RSEG CODE |
|
|
|
#else /* __IAR_SYSTEMS_ASM__ */ |
|
|
|
# ifndef USB_INTR_VECTOR /* default to hardware interrupt INT0 */ |
|
# ifdef INT0_vect |
|
# define USB_INTR_VECTOR INT0_vect // this is the "new" define for the vector |
|
# else |
|
# define USB_INTR_VECTOR SIG_INTERRUPT0 // this is the "old" vector |
|
# endif |
|
# endif |
|
.text |
|
.global USB_INTR_VECTOR |
|
.type USB_INTR_VECTOR, @function |
|
.global usbCrc16 |
|
.global usbCrc16Append |
|
#endif /* __IAR_SYSTEMS_ASM__ */ |
|
|
|
|
|
#if USB_INTR_PENDING < 0x40 /* This is an I/O address, use in and out */ |
|
# define USB_LOAD_PENDING(reg) in reg, USB_INTR_PENDING |
|
# define USB_STORE_PENDING(reg) out USB_INTR_PENDING, reg |
|
#else /* It's a memory address, use lds and sts */ |
|
# define USB_LOAD_PENDING(reg) lds reg, USB_INTR_PENDING |
|
# define USB_STORE_PENDING(reg) sts USB_INTR_PENDING, reg |
|
#endif |
|
|
|
#define usbTxLen1 usbTxStatus1 |
|
#define usbTxBuf1 (usbTxStatus1 + 1) |
|
#define usbTxLen3 usbTxStatus3 |
|
#define usbTxBuf3 (usbTxStatus3 + 1) |
|
|
|
|
|
;---------------------------------------------------------------------------- |
|
; Utility functions |
|
;---------------------------------------------------------------------------- |
|
|
|
#ifdef __IAR_SYSTEMS_ASM__ |
|
/* Register assignments for usbCrc16 on IAR cc */ |
|
/* Calling conventions on IAR: |
|
* First parameter passed in r16/r17, second in r18/r19 and so on. |
|
* Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) |
|
* Result is passed in r16/r17 |
|
* In case of the "tiny" memory model, pointers are only 8 bit with no |
|
* padding. We therefore pass argument 1 as "16 bit unsigned". |
|
*/ |
|
RTMODEL "__rt_version", "3" |
|
/* The line above will generate an error if cc calling conventions change. |
|
* The value "3" above is valid for IAR 4.10B/W32 |
|
*/ |
|
# define argLen r18 /* argument 2 */ |
|
# define argPtrL r16 /* argument 1 */ |
|
# define argPtrH r17 /* argument 1 */ |
|
|
|
# define resCrcL r16 /* result */ |
|
# define resCrcH r17 /* result */ |
|
|
|
# define ptrL ZL |
|
# define ptrH ZH |
|
# define ptr Z |
|
# define byte r22 |
|
# define bitCnt r19 |
|
# define polyL r20 |
|
# define polyH r21 |
|
# define scratch r23 |
|
|
|
#else /* __IAR_SYSTEMS_ASM__ */ |
|
/* Register assignments for usbCrc16 on gcc */ |
|
/* Calling conventions on gcc: |
|
* First parameter passed in r24/r25, second in r22/23 and so on. |
|
* Callee must preserve r1-r17, r28/r29 |
|
* Result is passed in r24/r25 |
|
*/ |
|
# define argLen r22 /* argument 2 */ |
|
# define argPtrL r24 /* argument 1 */ |
|
# define argPtrH r25 /* argument 1 */ |
|
|
|
# define resCrcL r24 /* result */ |
|
# define resCrcH r25 /* result */ |
|
|
|
# define ptrL XL |
|
# define ptrH XH |
|
# define ptr x |
|
# define byte r18 |
|
# define bitCnt r19 |
|
# define polyL r20 |
|
# define polyH r21 |
|
# define scratch r23 |
|
|
|
#endif |
|
|
|
#if USB_USE_FAST_CRC |
|
|
|
; This implementation is faster, but has bigger code size |
|
; Thanks to Slawomir Fras (BoskiDialer) for this code! |
|
; It implements the following C pseudo-code: |
|
; unsigned table(unsigned char x) |
|
; { |
|
; unsigned value; |
|
; |
|
; value = (unsigned)x << 6; |
|
; value ^= (unsigned)x << 7; |
|
; if(parity(x)) |
|
; value ^= 0xc001; |
|
; return value; |
|
; } |
|
; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen) |
|
; { |
|
; unsigned crc = 0xffff; |
|
; |
|
; while(argLen--) |
|
; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc); |
|
; return ~crc; |
|
; } |
|
|
|
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); |
|
; argPtr r24+25 / r16+r17 |
|
; argLen r22 / r18 |
|
; temp variables: |
|
; byte r18 / r22 |
|
; scratch r23 |
|
; resCrc r24+r25 / r16+r17 |
|
; ptr X / Z |
|
usbCrc16: |
|
mov ptrL, argPtrL |
|
mov ptrH, argPtrH |
|
ldi resCrcL, 0xFF |
|
ldi resCrcH, 0xFF |
|
rjmp usbCrc16LoopTest |
|
usbCrc16ByteLoop: |
|
ld byte, ptr+ |
|
eor resCrcL, byte ; resCrcL is now 'x' in table() |
|
mov byte, resCrcL ; compute parity of 'x' |
|
swap byte |
|
eor byte, resCrcL |
|
mov scratch, byte |
|
lsr byte |
|
lsr byte |
|
eor byte, scratch |
|
inc byte |
|
lsr byte |
|
andi byte, 1 ; byte is now parity(x) |
|
mov scratch, resCrcL |
|
mov resCrcL, resCrcH |
|
eor resCrcL, byte ; low byte of if(parity(x)) value ^= 0xc001; |
|
neg byte |
|
andi byte, 0xc0 |
|
mov resCrcH, byte ; high byte of if(parity(x)) value ^= 0xc001; |
|
clr byte |
|
lsr scratch |
|
ror byte |
|
eor resCrcH, scratch |
|
eor resCrcL, byte |
|
lsr scratch |
|
ror byte |
|
eor resCrcH, scratch |
|
eor resCrcL, byte |
|
usbCrc16LoopTest: |
|
subi argLen, 1 |
|
brsh usbCrc16ByteLoop |
|
com resCrcL |
|
com resCrcH |
|
ret |
|
|
|
#else /* USB_USE_FAST_CRC */ |
|
|
|
; This implementation is slower, but has less code size |
|
; |
|
; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); |
|
; argPtr r24+25 / r16+r17 |
|
; argLen r22 / r18 |
|
; temp variables: |
|
; byte r18 / r22 |
|
; bitCnt r19 |
|
; poly r20+r21 |
|
; scratch r23 |
|
; resCrc r24+r25 / r16+r17 |
|
; ptr X / Z |
|
usbCrc16: |
|
mov ptrL, argPtrL |
|
mov ptrH, argPtrH |
|
ldi resCrcL, 0 |
|
ldi resCrcH, 0 |
|
ldi polyL, lo8(0xa001) |
|
ldi polyH, hi8(0xa001) |
|
com argLen ; argLen = -argLen - 1: modified loop to ensure that carry is set |
|
ldi bitCnt, 0 ; loop counter with starnd condition = end condition |
|
rjmp usbCrcLoopEntry |
|
usbCrcByteLoop: |
|
ld byte, ptr+ |
|
eor resCrcL, byte |
|
usbCrcBitLoop: |
|
ror resCrcH ; carry is always set here (see brcs jumps to here) |
|
ror resCrcL |
|
brcs usbCrcNoXor |
|
eor resCrcL, polyL |
|
eor resCrcH, polyH |
|
usbCrcNoXor: |
|
subi bitCnt, 224 ; (8 * 224) % 256 = 0; this loop iterates 8 times |
|
brcs usbCrcBitLoop |
|
usbCrcLoopEntry: |
|
subi argLen, -1 |
|
brcs usbCrcByteLoop |
|
usbCrcReady: |
|
ret |
|
; Thanks to Reimar Doeffinger for optimizing this CRC routine! |
|
|
|
#endif /* USB_USE_FAST_CRC */ |
|
|
|
; extern unsigned usbCrc16Append(unsigned char *data, unsigned char len); |
|
usbCrc16Append: |
|
rcall usbCrc16 |
|
st ptr+, resCrcL |
|
st ptr+, resCrcH |
|
ret |
|
|
|
#undef argLen |
|
#undef argPtrL |
|
#undef argPtrH |
|
#undef resCrcL |
|
#undef resCrcH |
|
#undef ptrL |
|
#undef ptrH |
|
#undef ptr |
|
#undef byte |
|
#undef bitCnt |
|
#undef polyL |
|
#undef polyH |
|
#undef scratch |
|
|
|
|
|
#if USB_CFG_HAVE_MEASURE_FRAME_LENGTH |
|
#ifdef __IAR_SYSTEMS_ASM__ |
|
/* Register assignments for usbMeasureFrameLength on IAR cc */ |
|
/* Calling conventions on IAR: |
|
* First parameter passed in r16/r17, second in r18/r19 and so on. |
|
* Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) |
|
* Result is passed in r16/r17 |
|
* In case of the "tiny" memory model, pointers are only 8 bit with no |
|
* padding. We therefore pass argument 1 as "16 bit unsigned". |
|
*/ |
|
# define resL r16 |
|
# define resH r17 |
|
# define cnt16L r30 |
|
# define cnt16H r31 |
|
# define cntH r18 |
|
|
|
#else /* __IAR_SYSTEMS_ASM__ */ |
|
/* Register assignments for usbMeasureFrameLength on gcc */ |
|
/* Calling conventions on gcc: |
|
* First parameter passed in r24/r25, second in r22/23 and so on. |
|
* Callee must preserve r1-r17, r28/r29 |
|
* Result is passed in r24/r25 |
|
*/ |
|
# define resL r24 |
|
# define resH r25 |
|
# define cnt16L r24 |
|
# define cnt16H r25 |
|
# define cntH r26 |
|
#endif |
|
# define cnt16 cnt16L |
|
|
|
; extern unsigned usbMeasurePacketLength(void); |
|
; returns time between two idle strobes in multiples of 7 CPU clocks |
|
.global usbMeasureFrameLength |
|
usbMeasureFrameLength: |
|
ldi cntH, 6 ; wait ~ 10 ms for D- == 0 |
|
clr cnt16L |
|
clr cnt16H |
|
usbMFTime16: |
|
dec cntH |
|
breq usbMFTimeout |
|
usbMFWaitStrobe: ; first wait for D- == 0 (idle strobe) |
|
sbiw cnt16, 1 ;[0] [6] |
|
breq usbMFTime16 ;[2] |
|
sbic USBIN, USBMINUS ;[3] |
|
rjmp usbMFWaitStrobe ;[4] |
|
usbMFWaitIdle: ; then wait until idle again |
|
sbis USBIN, USBMINUS ;1 wait for D- == 1 |
|
rjmp usbMFWaitIdle ;2 |
|
ldi cnt16L, 1 ;1 represents cycles so far |
|
clr cnt16H ;1 |
|
usbMFWaitLoop: |
|
in cntH, USBIN ;[0] [7] |
|
adiw cnt16, 1 ;[1] |
|
breq usbMFTimeout ;[3] |
|
andi cntH, USBMASK ;[4] |
|
brne usbMFWaitLoop ;[5] |
|
usbMFTimeout: |
|
#if resL != cnt16L |
|
mov resL, cnt16L |
|
mov resH, cnt16H |
|
#endif |
|
ret |
|
|
|
#undef resL |
|
#undef resH |
|
#undef cnt16 |
|
#undef cnt16L |
|
#undef cnt16H |
|
#undef cntH |
|
|
|
#endif /* USB_CFG_HAVE_MEASURE_FRAME_LENGTH */ |
|
|
|
;---------------------------------------------------------------------------- |
|
; Now include the clock rate specific code |
|
;---------------------------------------------------------------------------- |
|
|
|
#ifndef USB_CFG_CLOCK_KHZ |
|
# ifdef F_CPU |
|
# define USB_CFG_CLOCK_KHZ (F_CPU/1000) |
|
# else |
|
# error "USB_CFG_CLOCK_KHZ not defined in usbconfig.h and no F_CPU set!" |
|
# endif |
|
#endif |
|
|
|
#if USB_CFG_CHECK_CRC /* separate dispatcher for CRC type modules */ |
|
# if USB_CFG_CLOCK_KHZ == 18000 |
|
# include "usbdrvasm18-crc.inc" |
|
# else |
|
# error "USB_CFG_CLOCK_KHZ is not one of the supported crc-rates!" |
|
# endif |
|
#else /* USB_CFG_CHECK_CRC */ |
|
# if USB_CFG_CLOCK_KHZ == 12000 |
|
# include "usbdrvasm12.inc" |
|
# elif USB_CFG_CLOCK_KHZ == 12800 |
|
# include "usbdrvasm128.inc" |
|
# elif USB_CFG_CLOCK_KHZ == 15000 |
|
# include "usbdrvasm15.inc" |
|
# elif USB_CFG_CLOCK_KHZ == 16000 |
|
# include "usbdrvasm16.inc" |
|
# elif USB_CFG_CLOCK_KHZ == 16500 |
|
# include "usbdrvasm165.inc" |
|
# elif USB_CFG_CLOCK_KHZ == 20000 |
|
# include "usbdrvasm20.inc" |
|
# else |
|
# error "USB_CFG_CLOCK_KHZ is not one of the supported non-crc-rates!" |
|
# endif |
|
#endif /* USB_CFG_CHECK_CRC */
|
|
|