2013-11-09 : Version 1.2

- Dreamcast keyboard support (Tested: HKT-7600 and HKT-4000)
 - Increased poll rate for better responsiveness
 - Display an image on the LCD if present.
   (Static image. Not usable by emulators)
This commit is contained in:
Raphaël Assénat 2013-11-07 03:42:35 +00:00
parent c4acc4b111
commit 2449b650cf
3 changed files with 87 additions and 43 deletions

View File

@ -1,6 +1,8 @@
2013-11-03 : Version 1.2
- Dreamcast keyboard support (Tested: HKT-7600)
2013-11-09 : Version 1.2
- Dreamcast keyboard support (Tested: HKT-7600 and HKT-4000)
- Increased poll rate for better responsiveness
- Display an image on the LCD if present.
(Static image. Not usable by emulators)
2013-11-02 : Version 1.1.1
- Longer timeout waiting for an answer.

View File

@ -1,35 +0,0 @@
#!/bin/sh
# Name: checksize
# Project: AVR-USB
# Author: Christian Starkjohann
# Creation Date: 2004-12-29
# Tabsize: 4
# Copyright: (c) 2005 OBJECTIVE DEVELOPMENT Software GmbH.
# Revision: $Id: checksize,v 1.1 2013-10-13 21:01:08 cvs Exp $
error=0
codelimit=8192
datalimit=960 # leave 64 bytes for stack
if [ $# -gt 1 ]; then
codelimit="$2"
fi
if [ $# -gt 2 ]; then
datalimit="$3"
fi
set -- `avr-size -d "$1" | awk '/[0-9]/ {print $1 + $2, $2 + $3, $2}'`
if [ $1 -gt $codelimit ]; then
echo "*** code size $1 exceeds limit of $codelimit"
error=1
else
echo "ROM: $1 bytes (data=$3)"
fi
if [ $2 -gt $datalimit ]; then
echo "*** data size $2 exceeds limit of $datalimit"
error=1
else
echo "RAM: $2 bytes"
fi
exit $error

View File

@ -19,8 +19,9 @@
*/
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include <string.h>
#include "usbdrv.h"
#include "gamepad.h"
@ -281,18 +282,68 @@ static void dcInit(void)
#define STATE_READ_PAD 2
#define STATE_READ_MOUSE 3
#define STATE_READ_KEYBOARD 4
#define STATE_LCD_DETECT 5
#define STATE_NULL 6
static unsigned char state = STATE_RESET_DEVICE;
const char lcd_data[200] PROGMEM = {
0x00, 0x00, 0x00, 0x04,
0x00, 0x00, 0x00, 0x00,
#include "raphnet.c"
};
static uint8_t lcd_addr = 0;
static void updateLcd(void)
{
unsigned char tmp[30];
if (lcd_addr) {
maple_sendFrame_P(MAPLE_CMD_BLOCK_WRITE,
lcd_addr,
MAPLE_DC_ADDR | MAPLE_ADDR_PORTB,
200, lcd_data);
maple_receiveFrame(tmp, 30);
}
}
static void pollSubs(void)
{
int i, v;
unsigned char tmp[30];
for (i=0; i<5; i++) {
maple_sendFrame(MAPLE_CMD_RQ_DEV_INFO,
MAPLE_ADDR_SUB(i) | MAPLE_ADDR_PORTB,
MAPLE_DC_ADDR | MAPLE_ADDR_PORTB,
0, NULL);
v = maple_receiveFrame(tmp, 30);
if (v==-2) {
_delay_ms(2);
uint16_t func = tmp[4] | tmp[5]<<8;
if (func & MAPLE_FUNC_LCD) {
lcd_addr = MAPLE_ADDR_SUB(i) | MAPLE_ADDR_PORTB;
}
}
}
}
static void dcReadPad(void)
{
static unsigned char state = STATE_RESET_DEVICE;
static unsigned char err_count = 0;
unsigned char tmp[30];
static unsigned char func_data[4];
static int lcd_detect_count = 0;
int v;
switch (state)
{
case STATE_NULL:
{
}
break;
case STATE_RESET_DEVICE:
{
maple_sendFrame(MAPLE_CMD_RESET_DEVICE,
@ -311,7 +362,7 @@ static void dcReadPad(void)
v = maple_receiveFrame(tmp, 30);
// Too many data arrives and we stop listening before the controller stop transmitting. The delay
// Too much data arrives and we stop listening before the controller stop transmitting. The delay
// here is to wait until the bus is idle again before continuing.
_delay_ms(2);
if (v==-2) {
@ -324,8 +375,9 @@ static void dcReadPad(void)
func = tmp[4] | tmp[5]<<8;
if (func & MAPLE_FUNC_CONTROLLER) {
state = STATE_READ_PAD;
setConnectedDevice(MAPLE_FUNC_CONTROLLER);
state = STATE_LCD_DETECT;
lcd_detect_count = 0;
} else if (func & MAPLE_FUNC_MOUSE) {
state = STATE_READ_MOUSE;
memcpy(func_data, tmp + 5, 4);
@ -340,6 +392,31 @@ static void dcReadPad(void)
}
break;
// Try for 2 seconds to find the address of the LCD.
//
// After 2 seconds of trying, if found, send the
// image.
//
// Sending the image right away after detection does not
// seem to work. This delay works around this.
case STATE_LCD_DETECT:
{
if (!lcd_addr)
{
pollSubs();
}
if (lcd_detect_count > 120) {
if (lcd_addr) {
updateLcd();
}
state = STATE_READ_PAD;
}
lcd_detect_count++;
}
break;
case STATE_READ_MOUSE:
{
int16_t rel_x, rel_y;
@ -418,7 +495,7 @@ static void dcReadPad(void)
MAPLE_FUNC_CONTROLLER);
v = maple_receiveFrame(tmp, 30);
if (v<=0) {
err_count++;
if (err_count > MAX_ERRORS) {
@ -427,7 +504,7 @@ static void dcReadPad(void)
return;
}
err_count = 0;
if (v < 16)
return;