Update README

This commit is contained in:
Kai Lüke 2020-06-22 21:46:58 +02:00
parent 2ff9ec2771
commit b5a0ece8a3
1 changed files with 7 additions and 9 deletions

View File

@ -1,8 +1,8 @@
# Arduino N64 Controller Library
Based on the work in http://www.instructables.com/id/Use-an-Arduino-with-an-N64-controller/ here comes a comfortable library for usage with e.g. Arduino Uno. For NES there is already http://code.google.com/p/nespad/ . This library uses inline assembly and controllers can be attached to PIN 0 up to 13. But be aware that it's not written in best way possible. Place the folder N64Controller into your folder 'libraries'.
Based on the work in [this guide for using Nintendo controllers with Arduinos](http://www.instructables.com/id/Use-an-Arduino-with-an-N64-controller/) here comes a comfortable library for usage with, e.g., Arduino Uno and similar CPUs. For NES there is already [nespad](http://code.google.com/p/nespad/). This library uses inline assembly. Controllers can be attached to PIN 0 up to 13. But be aware that it's not written in best way possible. To use it, search for N64 in the Library Manager. Otherwise place the folder N64Controller into your `libraries` folder or download and import it as ZIP.
I used it in combination with TVout ( http://code.google.com/p/arduino-tvout/ ) and EEPROM ( http://arduino.cc/playground/Code/EEPROMWriteAnything ) for highscore I modified an existing Tetris port which itself uses Simple Tetris Clone under MIT license to be using this library here and the result is quite nice: http://pothos.blogsport.eu/files/2012/03/N64Tetris.zip
I used it in combination with [TVout](http://code.google.com/p/arduino-tvout/) and [EEPROM](http://arduino.cc/playground/Code/EEPROMWriteAnything) for highscore saving when I modified an existing Tetris port. The port used a Simple Tetris Clone under MIT license and if you want you can see the result here which is quite nice: [N64Tetris](http://pothos.blogsport.eu/files/2012/03/N64Tetris.zip).
## Example code for library usage
@ -31,10 +31,10 @@ void loop() {
## Wireing
To use, hook up the following to the Arduino:
Digital I/O 2: N64 serial line
All appropriate grounding and power lines, i.e.
GND to left N64 controller PIN, Dig.PIN2 to middle Serial/Signal,
3.3V to right N64 PIN
* Digital I/O PIN specified as parameter: Connect to N64 middle serial/signal PIN (Arduino PIN 2 is the fallback if you specify a PIN > 13)
* Grounding GND: Connect to left N64 controller PIN
* Power line 3.3V: Connect to right N64 controller PIN
```
/------------\
@ -44,11 +44,9 @@ GND to left N64 controller PIN, Dig.PIN2 to middle Serial/Signal,
```
Maybe: connect PIN X with external 1K pull-up resistor to the 3.3V rail
Default and fallback PIN is 2
## Authors
* Gamecube controller to Nintendo 64 adapter
by Andrew Brown
* Gamecube controller to Nintendo 64 adapter by Andrew Brown
* Rewritten for N64 to HID by Peter Den Hartog
* Modified to be a library with selectable pins by Kai Lüke