anarch/settings.h

/**
  @file settings.h

  This file contains settings (or setting hints) for the game. Values here can
  fine tune performance vs quality and personalize the final compiled game. Some
  of these settings may be overriden by the specific platform used according to
  its limitations. You are advised to NOT change value in this file directly,
  but rather predefine them somewhere before this file gets included, e.g. in
  you personal settings file.

  by Miloslav Ciz (drummyfish), 2019

  Released under CC0 1.0 (https://creativecommons.org/publicdomain/zero/1.0/)
  plus a waiver of all other intellectual property. The goal of this work is to
  be and remain completely in the public domain forever, available for any use
  whatsoever.
*/

#ifndef _SFG_SETTINGS_H
#define _SFG_SETTINGS_H

/**
  Path to the save file. You may want to set this to some absolute path,
  depending on your system.
*/
#ifndef SFG_SAVE_FILE_PATH
  #define SFG_SAVE_FILE_PATH "anarch.sav"
#endif

/**
  Time multiplier in SFG_Units (1.0 == 1024). This can be used to slow down or
  speed up the game. Note that this also changes the rendering FPS accordingly
  (e.g. half FPS at half speed), so if you want to keep the FPS, divide it by
  the multiplier value.
*/
#ifndef SFG_TIME_MULTIPLIER
  #define SFG_TIME_MULTIPLIER 1024
#endif

/**
  Target FPS (frames per second). This sets the game logic FPS and will try to
  render at the same rate. If such fast rendering can't be achieved, frames will
  be droped, but the game logic will still be forced to run at this speed, so
  the game may actually become slowed down if FPS is set too high. Too high or
  too low FPS can also negatively affect game speeds which are computed as
  integers and rounding errors can occur soon, so don't set this to extreme
  values (try to keep between 20 to 100). FPS also determines the game
  simulation step length, so different FPS values may result in very slight
  differences in game behavior (not very noticeable but affecting demos etc.).
*/
#ifndef SFG_FPS
  #define SFG_FPS 60
#endif

/**
  Increases or decreases the brightness of the rendered world (but not menu,
  HUD etc.). Effective values are -8 to 8.
*/
#ifndef SFG_BRIGHTNESS
  #define SFG_BRIGHTNESS 0
#endif

/**
  On platforms with mouse this sets its horizontal sensitivity. 128 means 1
  RCL_Unit turn angle per mouse pixel travelled.
*/
#ifndef SFG_MOUSE_SENSITIVITY_HORIZONTAL
  #define SFG_MOUSE_SENSITIVITY_HORIZONTAL 32
#endif

/**
  Like SFG_MOUSE_SENSITIVITY_HORIZONTAL but for vertical look. 128 means 1
  shear pixel per mouse pixel travelled.
*/
#ifndef SFG_MOUSE_SENSITIVITY_VERTICAL
  #define SFG_MOUSE_SENSITIVITY_VERTICAL 64
#endif

/**
  Width of the screen in pixels. Set this to ACTUAL resolution. If you want the
  game to run at smaller resolution (with bigger pixels), do this using
  SFG_RESOLUTION_SCALEDOWN. 
*/
#ifndef SFG_SCREEN_RESOLUTION_X
  #define SFG_SCREEN_RESOLUTION_X 800
#endif

/**
  Like SFG_SCREEN_RESOLUTION_X, but for y resolution.
*/
#ifndef SFG_SCREEN_RESOLUTION_Y
  #define SFG_SCREEN_RESOLUTION_Y 600
#endif

/**
  How quickly player turns left/right, in degrees per second.
*/
#ifndef SFG_PLAYER_TURN_SPEED
  #define SFG_PLAYER_TURN_SPEED 180
#endif

/**
  Horizontal FOV (field of vision) in RCL_Units (1024 means 360 degrees).
*/
#ifndef SFG_FOV_HORIZONTAL
  #define SFG_FOV_HORIZONTAL 256
#endif

/**
  Like SFG_FOV_HORIZONTAL but for vertical angle.
*/
#ifndef SFG_FOV_VERTICAL
  #define SFG_FOV_VERTICAL 330
#endif

/**
  Distance, in RCL_Units, to which textures will be drawn. Textures behind this
  distance will be replaced by an average constant color, which maybe can help
  performance and also serves as an antialiasim (2 level MIP map). Value 0 turns
  texturing completely off, which is much faster than having just a low value,
  values >= 65535 activate texturing completely, which can be a little faster
  than setting having a high value lower than this limit.
*/
#ifndef SFG_TEXTURE_DISTANCE
  #define SFG_TEXTURE_DISTANCE 100000
#endif

/**
  How many times the screen resolution will be divided (how many times a game
  pixel will be bigger than the screen pixel).
*/
#ifndef SFG_RESOLUTION_SCALEDOWN
  #define SFG_RESOLUTION_SCALEDOWN 1
#endif

/**
  Multiplier, in RCL_Units (1024 == 1.0), of the damager player takes. This can
  be used to balance difficulty.
*/
#ifndef SFG_PLAYER_DAMAGE_MULTIPLIER
  #define SFG_PLAYER_DAMAGE_MULTIPLIER 512
#endif

/**
  Hint as to whether to run in fullscreen, if the platform allows it.
*/
#ifndef SFG_FULLSCREEN
  #define SFG_FULLSCREEN 0
#endif

/**
  Whether shadows (fog) should be dithered, i.e. more smooth (needs a bit more
  CPU performance and memory).
*/
#ifndef SFG_DITHERED_SHADOW
  #define SFG_DITHERED_SHADOW 0
#endif

/**
  Depth step (in RCL_Units) after which fog diminishes a color by one value
  point. For performance reasons this number should be kept a power of two!
*/
#ifndef SFG_FOG_DIMINISH_STEP
  #define SFG_FOG_DIMINISH_STEP 2048
#endif

/**
  If set, floor and ceiling will be colored differently depending on their
  height. This can be useful when fog is turned on and different floor levels
  are hard to distinguish.
*/
#ifndef SFG_DIFFERENT_FLOOR_CEILING_COLORS
  #define SFG_DIFFERENT_FLOOR_CEILING_COLORS 0
#endif

/**
  Maximum number of squares that will be traversed by any cast ray. Smaller
  number is faster but can cause visual artifacts.
*/
#ifndef SFG_RAYCASTING_MAX_STEPS
  #define SFG_RAYCASTING_MAX_STEPS 30
#endif

/**
  Maximum number of hits any cast ray will register. Smaller number is faster
  but can cause visual artifacts.
*/
#ifndef SFG_RAYCASTING_MAX_HITS
  #define SFG_RAYCASTING_MAX_HITS 10
#endif

/**
  Same as SFG_RAYCASTING_MAX_STEPS but for visibility rays that are used to
  check whether sprites are visible etc.
*/
#ifndef SFG_RAYCASTING_VISIBILITY_MAX_STEPS
  #if SFG_RAYCASTING_MAX_STEPS < 15
    #define SFG_RAYCASTING_VISIBILITY_MAX_STEPS 15
  #else
    #define SFG_RAYCASTING_VISIBILITY_MAX_STEPS SFG_RAYCASTING_MAX_STEPS
  #endif
#endif

/**
  Same as SFG_RAYCASTING_MAX_HITS but for visibility rays that are used to check
  whether sprites are visible etc.
*/
#ifndef SFG_RAYCASTING_VISIBILITY_MAX_HITS
  #if SFG_RAYCASTING_MAX_HITS < 6
    #define SFG_RAYCASTING_VISIBILITY_MAX_HITS 6
  #else
    #define SFG_RAYCASTING_VISIBILITY_MAX_HITS SFG_RAYCASTING_MAX_HITS
  #endif
#endif

/**
  How many times rendering should be subsampled horizontally. Bigger number
  can significantly improve performance (by casting fewer rays), but can look
  a little worse. This number should be a divisor of SFG_SCREEN_RESOLUTION_X!
*/
#ifndef SFG_RAYCASTING_SUBSAMPLE
  #define SFG_RAYCASTING_SUBSAMPLE 1
#endif

/**
  Enables or disables fog (darkness) due to distance. Recommended to keep on
  for good look, but can be turned off for performance.
*/
#ifndef SFG_ENABLE_FOG
  #define SFG_ENABLE_FOG 1
#endif

/**
  Says whether sprites should diminish in fog. This takes more performance but
  looks better.
*/
#ifndef SFG_DIMINISH_SPRITES
  #define SFG_DIMINISH_SPRITES 1
#endif

/**
  How quick player head bob is, 1024 meaning once per second. 0 Means turn off
  head bob.
*/
#ifndef SFG_HEADBOB_SPEED
  #define SFG_HEADBOB_SPEED 900
#endif

/**
  Sets head bob offset, in RCL_UNITS_PER_SQUARE. 0 Means turn off head bob.
*/
#ifndef SFG_HEADBOB_OFFSET
  #define SFG_HEADBOB_OFFSET 200
#endif

/**
  If head bob is on, this additionally sets additional camera shear bob, in
  pixels, which can make bobbing look more "advanced". 0 turns this option off.
*/
#ifndef SFG_HEADBOB_SHEAR
  #define SFG_HEADBOB_SHEAR 0
#endif

/**
  Weapon bobbing offset in weapon image pixels.
*/
#ifndef SFG_WEAPONBOB_OFFSET
  #define SFG_WEAPONBOB_OFFSET 4 
#endif

/**
  Camera shearing (looking up/down) speed, in vertical resolutions per second.
*/
#ifndef SFG_CAMERA_SHEAR_SPEED
  #define SFG_CAMERA_SHEAR_SPEED 3
#endif

/**
  Maximum camera shear (vertical angle). 1024 means 1.0 * vertical resolution.
*/
#ifndef SFG_CAMERA_MAX_SHEAR
  #define SFG_CAMERA_MAX_SHEAR 1024
#endif

/**
  Specifies how quick some sprite animations are, in frames per second.
*/
#ifndef SFG_SPRITE_ANIMATION_SPEED
  #define SFG_SPRITE_ANIMATION_SPEED 4
#endif

/**
  How wide the border indicator is, in fractions of screen width.
*/
#ifndef SFG_HUD_BORDER_INDICATOR_WIDTH
  #define SFG_HUD_BORDER_INDICATOR_WIDTH 32
#endif

/**
  For how long border indication (being hurt etc.) stays shown, in ms.
*/
#ifndef SFG_HUD_BORDER_INDICATOR_DURATION
  #define SFG_HUD_BORDER_INDICATOR_DURATION 500
#endif

/**
  Color (palette index) by which being hurt is indicated.
*/
#ifndef SFG_HUD_HURT_INDICATION_COLOR
  #define SFG_HUD_HURT_INDICATION_COLOR 175
#endif

/**
  Color (palette index) by which taking an item is indicated.
*/
#ifndef SFG_HUD_ITEM_TAKEN_INDICATION_COLOR
  #define SFG_HUD_ITEM_TAKEN_INDICATION_COLOR 207
#endif

/**
  How many element (items, monsters, ...) distances will be checked per frame
  for distance. Higher value may decrease performance a tiny bit, but things
  will react more quickly and appear less "out of thin air".
*/
#ifndef SFG_ELEMENT_DISTANCES_CHECKED_PER_FRAME
  #define SFG_ELEMENT_DISTANCES_CHECKED_PER_FRAME 8
#endif

/**
  Maximum distance at which sound effects (SFX) will be played. The SFX volume
  will gradually drop towards this distance.
*/
#ifndef SFG_SFX_MAX_DISTANCE
  #define SFG_SFX_MAX_DISTANCE (1024 * 60)
#endif

/**
  Says the intensity of background image blur. 0 means no blur, which improves
  performance and lowers memory usage. Blur doesn't look very good in small
  resolutions.
*/
#ifndef SFG_BACKGROUND_BLUR
  #define SFG_BACKGROUND_BLUR 0
#endif

/**
  Defines the period, in ms, of things that blink, such as text.
*/
#ifndef SFG_BLINK_PERIOD
  #define SFG_BLINK_PERIOD 500
#endif

/**
  Probability (0 - 255) of how often a monster makes sound during movement.
*/
#ifndef SFG_MONSTER_SOUND_PROBABILITY
  #define SFG_MONSTER_SOUND_PROBABILITY 64
#endif

/**
  Affects how precise monsters are in aiming, specify random range in
  fourths of a game square. Should be power of 2 for performance.
*/
#ifndef SFG_MONSTER_AIM_RANDOMNESS
  #define SFG_MONSTER_AIM_RANDOMNESS 4
#endif

/// Color 1 index of player on map.
#ifndef SFG_MAP_PLAYER_COLOR1
  #define SFG_MAP_PLAYER_COLOR1 93
#endif

/// Color 2 index of player on map.
#ifndef SFG_MAP_PLAYER_COLOR2
  #define SFG_MAP_PLAYER_COLOR2 111
#endif

/// Color index of elevators on map.
#ifndef SFG_MAP_ELEVATOR_COLOR
  #define SFG_MAP_ELEVATOR_COLOR 214
#endif

/// Color index of squeezers on map.
#ifndef SFG_MAP_SQUEEZER_COLOR
  #define SFG_MAP_SQUEEZER_COLOR 246
#endif

/// Color index of door on map.
#ifndef SFG_MAP_DOOR_COLOR
  #define SFG_MAP_DOOR_COLOR 188
#endif

/**
  Boolean value indicating whether current OS is malware.
*/
#ifndef SFG_OS_IS_MALWARE
  #define SFG_OS_IS_MALWARE 0
#endif

/**
  Angle difference, as a cos value in RCL_Units, between the player and a
  monster, at which vertical autoaim will trigger. If the angle is greater, a
  shot will go directly forward.
*/
#ifndef SFG_VERTICAL_AUTOAIM_ANGLE_THRESHOLD
  #define SFG_VERTICAL_AUTOAIM_ANGLE_THRESHOLD 50
#endif

/**
  Byte (0 - 255) volume of the menu click sound.
*/
#ifndef SFG_MENU_CLICK_VOLUME
  #define SFG_MENU_CLICK_VOLUME 220
#endif

/**
  Says whether the exit item should be showed in the menu. Platforms that can't
  exit (such as some gaming consoles that simply use power off button) can
  define this to 0.
*/
#ifndef SFG_CAN_EXIT
  #define SFG_CAN_EXIT 1
#endif

/**
  On Arduino platforms this should be set to 1. That will cause some special
  treatment regarding constant variables and PROGMEM.
*/
#ifndef SFG_ARDUINO
  #define SFG_ARDUINO 0
#endif

/**
  Whether levels background (in distance or transparent wall textures) should
  be drawn. If turned off, the background will be constant color, which can 
  noticably increase performance.
*/
#ifndef SFG_DRAW_LEVEL_BACKGROUND
  #define SFG_DRAW_LEVEL_BACKGROUND 1
#endif

/**
  Says the size, in pixels, of a sprite when it is closest to the camera, which
  is the maximum size that can be drawn. Sprites on "weird" aspect ratios can
  look weirdly scaled, so this option can be used to fix that (typically set
  horizontal screen resolution instead of vertical).
*/
#ifndef SFG_SPRITE_MAX_SIZE
  #define SFG_SPRITE_MAX_SIZE \
    (SFG_SCREEN_RESOLUTION_Y / SFG_RESOLUTION_SCALEDOWN)
#endif

/**
  If set, single item menu will be forced.
*/
#ifndef SFG_FORCE_SINGLE_ITEM_MENU
  #define SFG_FORCE_SINGLE_ITEM_MENU 0
#endif

//------ developer/debug settings ------

/**
  Developer cheat for having infinite ammo in all weapons.
*/
#ifndef SFG_INFINITE_AMMO
  #define SFG_INFINITE_AMMO 0
#endif

/**
  Developer cheat for immortality.
*/
#ifndef SFG_IMMORTAL
  #define SFG_IMMORTAL 0
#endif

/**
  Developer setting, with 1 every level is won immediately after start.
*/
#ifndef SFG_QUICK_WIN
  #define SFG_QUICK_WIN 0
#endif

/**
  Reveals all levels to be played.
*/
#ifndef SFG_ALL_LEVELS
  #define SFG_ALL_LEVELS 0
#endif

/**
  Turn on for previes mode for map editing (flying, noclip, fast movement etc.).
*/
#ifndef SFG_PREVIEW_MODE
  #define SFG_PREVIEW_MODE 0
#endif

/**
  How much faster movement is in the preview mode.
*/
#ifndef SFG_PREVIEW_MODE_SPEED_MULTIPLIER
  #define SFG_PREVIEW_MODE_SPEED_MULTIPLIER 2
#endif

/**
  Skips menu and starts given level immediatelly, for development. 0 means this
  options is ignored, 1 means load level 1 etc.
*/
#ifndef SFG_START_LEVEL
  #define SFG_START_LEVEL 0
#endif

/**
  Reveals whole level map from start.
*/
#ifndef SFG_REVEAL_MAP
  #define SFG_REVEAL_MAP 0
#endif

/**
  Gives player all keys from start.
*/
#ifndef SFG_UNLOCK_DOOR
  #define SFG_UNLOCK_DOOR 0
#endif

#endif // guard