Arduino-USB-HID-RetroJoystickAdapter/XBox360_XInput at d2500d543341c5d2010e7d3279b1017697fff2d2 - Arduino-USB-HID-RetroJoystickAdapter - code.moparisthebest.com

mirror/Arduino-USB-HID-RetroJoystickAdapter

mirror of https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter synced 2024-12-21 23:18:56 -05:00

History

Jarno Lehtinen f4bc001e5b Update RetroJoystickAdapter_PsxNewLib_NintendoEtensionCtrl_B360.ino		2021-11-07 00:35:29 +02:00
..
README.md	Update README.md	2021-11-06 22:24:19 +02:00
RetroJoystickAdapter_Playstation_XB360 (old).ino	Rename RetroJoystickAdapter_Playstation_XB360.ino to RetroJoystickAdapter_Playstation_XB360 (old).ino	2021-11-05 21:03:42 +02:00
RetroJoystickAdapter_PsxNewLib_NintendoEtensionCtrl_B360.ino	Update RetroJoystickAdapter_PsxNewLib_NintendoEtensionCtrl_B360.ino	2021-11-07 00:35:29 +02:00
RetroJoystickAdapter_PsxNewLib_XB360.ino	Update RetroJoystickAdapter_PsxNewLib_XB360.ino	2021-11-06 15:21:26 +02:00

README.md

Based on https://github.com/dmadison/ArduinoXInput

Install Arduino IDE hardware: https://github.com/dmadison/ArduinoXInput_AVR
Install Arduino IDE library from Library manager: XInput by David Madison
Tester from Windows Store: Game Controller Tester
Online tester: https://gamepad-tester.com/
Doesn't go to flashing mode automatically. Connect RST to GND to get Arduino Pro Micro to programming mode.

PsxNewLib

https://github.com/SukkoPera/PsxNewLib (from Arduino IDE library manager 6.11.2021: 0.4.0)
https://github.com/SukkoPera/PsxControllerShield
https://github.com/SukkoPera/PsxControllerShield/blob/master/doc/schematics.pdf
(my green dualshock analog controller: SCPH-1200) (Controller Type is: Guitar Hero)?
(my black dualshock 2 controller: SCPH-10010) (Controller Type is: Dual Shock)
https://store.curiousinventor.com/guides/PS2
https://github.com/SukkoPera/PsxNewLib/issues/12
https://github.com/dmadison/NintendoExtensionCtrl

PSX	SPI	Uno	Pro Micro	notes
1 DATA (brown )	MISO →	D12 (PB4)	D14 (PB3)	Use 1k pullup resistor to 3.3V!
2 CMD (orange )	MOSI ←	D11 (PB3)	D16 (PB2)
3 Vibration power (7.2-9V) (grey )
4 GND (black )		GND	GND
5 VCC (3.3V) (red )		VCC	VCC
6 ATT (yellow )	SS ←	D10 (PB2)	D10 (PB6)	_{^{(pro micro: SS would be D17 (PB0/RX_LED), but there is no pin D17)}}
7 CLK (blue )	SCK ←	D13 (PB5)	D15 (PB1)
8 unknown (white )
9 ACK (green )				(when this is needed?)
Wii
1 VCC (3.3V) (red )
2 SCL (yellow )		A5 (PC5)	D3 (PD0)
3 Detect device (3.3V) (black )			D4 (PD4)	Use 10k pulldown resistor to GND!
4 NC
5 SDA (green )		A4 (PC4)	D2 (PD1)
6 GND (white )

TODO

Analog triggers for Dualshock 2
Name in Windows: Controller (Arduino Leonardo), with real XB360 controller: Controller (XBOX 360 for Windows)? Can it be changed in C:\Program Files (x86)\Arduino\hardware\xinput\avr\boards.txt?