mirror of
https://github.com/mcgurk/Arduino-USB-HID-RetroJoystickAdapter
synced 2024-12-22 07:28:53 -05:00
297 lines
9.1 KiB
C++
297 lines
9.1 KiB
C++
|
|
//https://www.cs.cmu.edu/~chuck/infopg/segasix.txt
|
|
|
|
//DB9 (8=GND, 5=VCC): 1 2 3 4 5 6 7 8 9
|
|
const uint8_t inputPinsPort1[] = { 2, 3, 4, 5, 6, 7, 8, 0, 9};
|
|
const uint8_t inputPinsPort2[] = {10, 16, 14, 15, A0, A1, A2, 0, A3};
|
|
|
|
// if you use two DB9 connectors solded back to back on your ATmega32u4, you should use this inputs
|
|
//const uint8_t inputPinsPort1[] = { 2, 3, 4, 5, 6, 7, 8, 0, 9};
|
|
//const uint8_t inputPinsPort2[] = {15, A0, A1, A2, A3, 14, 16, 0, 10};
|
|
|
|
// yet another version (Images/sega_genesis_adapter.jpg)
|
|
//const uint8_t inputPinsPort1[] = { 5, 6, 7, 8, 9, 4, 2, 0, A2};
|
|
//const uint8_t inputPinsPort2[] = {10, 16, 14, 15, A0, 3, A3, 0, A1};
|
|
|
|
|
|
//#define DEBUG
|
|
|
|
inline void translateState(uint8_t *data, uint8_t *state) {
|
|
state[0] = ~data[0];
|
|
state[1] = 127;
|
|
state[2] = 127;
|
|
if (!bitRead(data[1], 0)) state[2] = 0; /* up */
|
|
if (!bitRead(data[1], 1)) state[2] = 255; /* down */
|
|
if (!bitRead(data[1], 2)) state[1] = 0; /* left */
|
|
if (!bitRead(data[1], 3)) state[1] = 255; /* right */
|
|
}
|
|
|
|
uint8_t J1BTN6 = 0;
|
|
uint8_t J2BTN6 = 0;
|
|
|
|
uint8_t plugged1 = 0;
|
|
uint8_t plugged2 = 0;
|
|
|
|
#include "HID.h"
|
|
|
|
#if ARDUINO < 10606
|
|
#error The Joystick2 library requires Arduino IDE 1.6.6 or greater. Please update your IDE.
|
|
#endif
|
|
|
|
#if !defined(USBCON)
|
|
#error The Joystick2 library can only be used with a USB MCU (e.g. Arduino Leonardo, Arduino Micro, etc.).
|
|
#endif
|
|
|
|
#if !defined(_USING_HID)
|
|
#error "legacy HID core (non pluggable)"
|
|
#endif
|
|
|
|
#define JOYSTICK_REPORT_ID 0x04
|
|
#define JOYSTICK2_REPORT_ID 0x05
|
|
|
|
#define JOYSTICK_DATA_SIZE 2
|
|
#define JOYSTICK_STATE_SIZE 3
|
|
|
|
|
|
//================================================================================
|
|
//================================================================================
|
|
// Joystick (Gamepad)
|
|
|
|
|
|
#define HIDDESC_MACRO(REPORT_ID) \
|
|
/* Joystick # */ \
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ \
|
|
0x09, 0x04, /* USAGE (Joystick) */ \
|
|
0xa1, 0x01, /* COLLECTION (Application) */ \
|
|
0x85, REPORT_ID, /* REPORT_ID */ \
|
|
/* 8 Buttons */ \
|
|
0x05, 0x09, /* USAGE_PAGE (Button) */ \
|
|
0x19, 0x01, /* USAGE_MINIMUM (Button 1) */ \
|
|
0x29, 0x08, /* USAGE_MAXIMUM (Button 8) */ \
|
|
0x15, 0x00, /* LOGICAL_MINIMUM (0) */ \
|
|
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ \
|
|
0x75, 0x01, /* REPORT_SIZE (1) */ \
|
|
0x95, 0x08, /* REPORT_COUNT (8) */ \
|
|
0x81, 0x02, /* INPUT (Data,Var,Abs) */ \
|
|
/* X and Y Axis */ \
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ \
|
|
0x09, 0x01, /* USAGE (Pointer) */ \
|
|
0xA1, 0x00, /* COLLECTION (Physical) */ \
|
|
0x09, 0x30, /* USAGE (x) */ \
|
|
0x09, 0x31, /* USAGE (y) */ \
|
|
0x15, 0x00, /* LOGICAL_MINIMUM (0) */ \
|
|
0x26, 0xff, 0x00, /* LOGICAL_MAXIMUM (255) */ \
|
|
0x75, 0x08, /* REPORT_SIZE (8) */ \
|
|
0x95, 0x02, /* REPORT_COUNT (2) */ \
|
|
0x81, 0x02, /* INPUT (Data,Var,Abs) */ \
|
|
0xc0, /* END_COLLECTION */ \
|
|
0xc0 /* END_COLLECTION */
|
|
|
|
|
|
|
|
|
|
static const uint8_t hidReportDescriptor[] PROGMEM = {
|
|
HIDDESC_MACRO(JOYSTICK_REPORT_ID),
|
|
HIDDESC_MACRO(JOYSTICK2_REPORT_ID)
|
|
};
|
|
|
|
|
|
class Joystick_ {
|
|
|
|
private:
|
|
uint8_t joystickId;
|
|
uint8_t reportId;
|
|
uint8_t olddata[JOYSTICK_DATA_SIZE];
|
|
uint8_t state[JOYSTICK_STATE_SIZE];
|
|
uint8_t flag;
|
|
|
|
public:
|
|
uint8_t type;
|
|
uint8_t data[JOYSTICK_DATA_SIZE];
|
|
|
|
Joystick_(uint8_t initJoystickId, uint8_t initReportId) {
|
|
// Setup HID report structure
|
|
static bool usbSetup = false;
|
|
|
|
if (!usbSetup) {
|
|
static HIDSubDescriptor node(hidReportDescriptor, sizeof(hidReportDescriptor));
|
|
HID().AppendDescriptor(&node);
|
|
usbSetup = true;
|
|
}
|
|
|
|
// Initalize State
|
|
joystickId = initJoystickId;
|
|
reportId = initReportId;
|
|
|
|
data[0] = 0;
|
|
data[1] = 0;
|
|
memcpy(olddata, data, JOYSTICK_DATA_SIZE);
|
|
translateState(data, state);
|
|
sendState(1);
|
|
}
|
|
|
|
void updateState() {
|
|
if (memcmp(olddata, data, JOYSTICK_DATA_SIZE)) {
|
|
memcpy(olddata, data, JOYSTICK_DATA_SIZE);
|
|
translateState(data, state);
|
|
flag = 1;
|
|
}
|
|
}
|
|
|
|
void sendState(uint8_t force = 0) {
|
|
if (flag || force) {
|
|
// HID().SendReport(Report number, array of values in same order as HID descriptor, length)
|
|
HID().SendReport(reportId, state, JOYSTICK_STATE_SIZE);
|
|
flag = 0;
|
|
}
|
|
}
|
|
|
|
};
|
|
|
|
|
|
Joystick_ Joystick[2] =
|
|
{
|
|
Joystick_(0, JOYSTICK_REPORT_ID),
|
|
Joystick_(1, JOYSTICK2_REPORT_ID)
|
|
};
|
|
|
|
//================================================================================
|
|
//================================================================================
|
|
|
|
#define MODE_SELECT_PORT1 inputPinsPort1[6]
|
|
#define MODE_SELECT_PORT2 inputPinsPort2[6]
|
|
#define VCC_PORT1 inputPinsPort1[4]
|
|
#define VCC_PORT2 inputPinsPort2[4]
|
|
|
|
void modeSelect(uint8_t m) {
|
|
digitalWrite(MODE_SELECT_PORT1, m);
|
|
digitalWrite(MODE_SELECT_PORT2, m);
|
|
delayMicroseconds(20);
|
|
}
|
|
|
|
|
|
void setup() {
|
|
for (uint8_t i = 0; i < 9; i++) {
|
|
if (inputPinsPort1[i] != 0 && i != 4 && i != 6)
|
|
pinMode(inputPinsPort1[i], INPUT_PULLUP);
|
|
if (inputPinsPort2[i] != 0 && i != 4 && i != 6)
|
|
pinMode(inputPinsPort2[i], INPUT_PULLUP);
|
|
} //without PULLUP every button are read as pressed down if controller is not connected.
|
|
|
|
pinMode(VCC_PORT1, OUTPUT);
|
|
pinMode(VCC_PORT2, OUTPUT);
|
|
digitalWrite(VCC_PORT1, HIGH);
|
|
digitalWrite(VCC_PORT2, HIGH);
|
|
|
|
pinMode(MODE_SELECT_PORT1, OUTPUT);
|
|
pinMode(MODE_SELECT_PORT2, OUTPUT);
|
|
modeSelect(HIGH);
|
|
|
|
#ifdef DEBUG
|
|
Serial.begin(9600);
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
void loop() {
|
|
|
|
Joystick[0].data[0] = 0xff;
|
|
Joystick[1].data[0] = 0xff;
|
|
Joystick[0].data[1] = 0xff;
|
|
Joystick[1].data[1] = 0xff;
|
|
|
|
modeSelect(LOW);
|
|
|
|
bitWrite(Joystick[0].data[1], 6, digitalRead(inputPinsPort1[2])); //detect1 j1
|
|
bitWrite(Joystick[0].data[1], 7, digitalRead(inputPinsPort1[3])); //detect2 j1
|
|
bitWrite(Joystick[1].data[1], 6, digitalRead(inputPinsPort2[2])); //detect1 j2
|
|
bitWrite(Joystick[1].data[1], 7, digitalRead(inputPinsPort2[3])); //detect2 j2
|
|
|
|
bitWrite(Joystick[0].data[0], 0, digitalRead(inputPinsPort1[5])); //A1
|
|
bitWrite(Joystick[0].data[0], 3, digitalRead(inputPinsPort1[8])); //Start1
|
|
bitWrite(Joystick[1].data[0], 0, digitalRead(inputPinsPort2[5])); //A2
|
|
bitWrite(Joystick[1].data[0], 3, digitalRead(inputPinsPort2[8])); //Start2
|
|
|
|
modeSelect(HIGH);
|
|
|
|
for (uint8_t i = 0; i < 4; i++) {
|
|
bitWrite(Joystick[0].data[1], i, digitalRead(inputPinsPort1[i])); //AXES1
|
|
bitWrite(Joystick[1].data[1], i, digitalRead(inputPinsPort2[i])); //AXES2
|
|
}
|
|
|
|
bitWrite(Joystick[0].data[0], 1, digitalRead(inputPinsPort1[5])); //B1
|
|
bitWrite(Joystick[0].data[0], 2, digitalRead(inputPinsPort1[8])); //C1
|
|
bitWrite(Joystick[1].data[0], 1, digitalRead(inputPinsPort2[5])); //B2
|
|
bitWrite(Joystick[1].data[0], 2, digitalRead(inputPinsPort2[8])); //C2
|
|
|
|
|
|
//read X,Y,Z,mode
|
|
modeSelect(LOW);
|
|
modeSelect(HIGH);
|
|
modeSelect(LOW);
|
|
modeSelect(HIGH);
|
|
if (J1BTN6) {
|
|
bitWrite(Joystick[0].data[0], 4, digitalRead(inputPinsPort1[2])); //X1
|
|
bitWrite(Joystick[0].data[0], 5, digitalRead(inputPinsPort1[1])); //Y1
|
|
bitWrite(Joystick[0].data[0], 6, digitalRead(inputPinsPort1[0])); //Z1
|
|
bitWrite(Joystick[0].data[0], 7, digitalRead(inputPinsPort1[3])); //mode
|
|
}
|
|
if (J2BTN6) {
|
|
bitWrite(Joystick[1].data[0], 4, digitalRead(inputPinsPort2[2])); //X1
|
|
bitWrite(Joystick[1].data[0], 5, digitalRead(inputPinsPort2[1])); //Y1
|
|
bitWrite(Joystick[1].data[0], 6, digitalRead(inputPinsPort2[0])); //Z1
|
|
bitWrite(Joystick[1].data[0], 7, digitalRead(inputPinsPort2[3])); //mode
|
|
}
|
|
|
|
|
|
//detect button mode and detect if controller is unplugged
|
|
uint8_t detect1 = !(Joystick[0].data[1] & B11000000);
|
|
if (!plugged1 && detect1) {
|
|
plugged1 = 1;
|
|
digitalWrite(VCC_PORT1, LOW);
|
|
delay(100);
|
|
digitalWrite(VCC_PORT1, HIGH);
|
|
if (!digitalRead(inputPinsPort1[0]) && !digitalRead(inputPinsPort1[1])) J1BTN6 = 1;
|
|
}
|
|
if (!detect1) {
|
|
plugged1 = 0;
|
|
J1BTN6 = 0;
|
|
}
|
|
|
|
//detect button mode and detect if controller is unplugged
|
|
uint8_t detect2 = !(Joystick[1].data[1] & B11000000);
|
|
if (!plugged2 && detect2) {
|
|
plugged2 = 1;
|
|
digitalWrite(VCC_PORT2, LOW);
|
|
delay(100);
|
|
digitalWrite(VCC_PORT2, HIGH);
|
|
if (!digitalRead(inputPinsPort2[0]) && !digitalRead(inputPinsPort2[1])) J2BTN6 = 1;
|
|
}
|
|
if (!detect2) {
|
|
plugged2 = 0;
|
|
J2BTN6 = 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
Serial.print(" data0 j1: 0x"); Serial.print(Joystick[0].data[0], HEX);
|
|
Serial.print(" data0 j2: 0x"); Serial.print(Joystick[1].data[0], HEX);
|
|
Serial.print(" data1 j1: 0x"); Serial.print(Joystick[0].data[1], HEX);
|
|
Serial.print(" data1 j2: 0x"); Serial.print(Joystick[1].data[1], HEX);
|
|
Serial.print(" 6btn j1: 0x"); Serial.print(J1BTN6, HEX);
|
|
Serial.print(" 6btn j2: 0x"); Serial.print(J2BTN6, HEX);
|
|
Serial.println();
|
|
delay(50);
|
|
Serial.flush();
|
|
#endif
|
|
|
|
Joystick[0].updateState();
|
|
Joystick[1].updateState();
|
|
Joystick[0].sendState();
|
|
Joystick[1].sendState();
|
|
delayMicroseconds(1000);
|
|
|
|
|
|
}
|