Based on https://github.com/dmadison/ArduinoXInput - Install Arduino IDE hardware: https://github.com/dmadison/ArduinoXInput_AVR - Install Arduino IDE library from Library manager: XInput by David Madison - Tester from Windows Store: Game Controller Tester - Online tester: https://gamepad-tester.com/ - Doesn't go to flashing mode automatically. Connect RST to GND to get Arduino Pro Micro to programming mode. ## PsxNewLib - https://github.com/SukkoPera/PsxNewLib (from Arduino IDE library manager 6.11.2021: 0.4.0) - https://github.com/SukkoPera/PsxControllerShield - https://github.com/SukkoPera/PsxControllerShield/blob/master/doc/schematics.pdf - (my green dualshock analog controller: SCPH-1200) (Controller Type is: Guitar Hero)? - (my black dualshock 2 controller: SCPH-10010) (Controller Type is: Dual Shock) - https://store.curiousinventor.com/guides/PS2 - https://github.com/SukkoPera/PsxNewLib/issues/12 - https://github.com/dmadison/NintendoExtensionCtrl PSX | SPI | Uno | Pro Micro | notes --- | --- | --- | --- | --- 1 DATA (brown ![#brown](https://via.placeholder.com/10/c68c53/000000?text=+)) | MISO → | D12 (PB4) | D14 (PB3) | Use 1k pullup resistor to 3.3V! 2 CMD (orange ![#orange](https://via.placeholder.com/10/ff8000/000000?text=+)) | MOSI ← | D11 (PB3) | D16 (PB2) | 3 Vibration power (7.2-9V) (grey ![#grey](https://via.placeholder.com/10/999999/000000?text=+)) | | | | 4 GND (black ![#black](https://via.placeholder.com/10/000000/000000?text=+)) | | GND | GND | 5 VCC (3.3V) (red ![#red](https://via.placeholder.com/10/ff0000/000000?text=+)) | | VCC | VCC | 6 ATT (yellow ![#yellow](https://via.placeholder.com/10/ffff00/000000?text=+)) | SS ← | D10 (PB2) | D10 (PB6) | (pro micro: SS would be D17 (PB0/RX_LED), but there is no pin D17) 7 CLK (blue ![#blue](https://via.placeholder.com/10/0000ff/000000?text=+)) | SCK ← | D13 (PB5) | D15 (PB1) | 8 unknown (white ![#white](https://via.placeholder.com/10/ffffff/000000?text=+)) | | | | 9 ACK (green ![#green](https://via.placeholder.com/10/00ff00/000000?text=+)) | | | | (when this is needed?) **Wii** | | | | | 1 VCC (3.3V) (red ![#red](https://via.placeholder.com/10/ff0000/000000?text=+)) | | | | 2 SCL (yellow ![#yellow](https://via.placeholder.com/10/ffff00/000000?text=+)) | | A5 (PC5) | D3 (PD0) | 3 Detect device (3.3V) (black ![#black](https://via.placeholder.com/10/000000/000000?text=+)) | | | D4 (PD4) | Use 10k pulldown resistor to GND! 4 NC | | | | 5 SDA (green ![#green](https://via.placeholder.com/10/00ff00/000000?text=+)) | | A4 (PC4) | D2 (PD1) | 6 GND (white ![#white](https://via.placeholder.com/10/ffffff/000000?text=+)) | | | | ### TODO - Analog triggers for Dualshock 2 - Name in Windows: Controller (Arduino Leonardo), with real XB360 controller: Controller (XBOX 360 for Windows)? Can it be changed in C:\Program Files (x86)\Arduino\hardware\xinput\avr\boards.txt?